Personal information

mechanical engineering
Poland

Activities

Employment (1)

Military University of Technology in Warsaw: Warsaw, PL

2014-05-04 to present | Ph. D. Eng. (Mechatronics and Aviation)
Employment
Source: Self-asserted source
Pawel Platek

Education and qualifications (2)

Military University of Technology in Warsaw: Warsaw, PL

2011-10-23 to 2012-11-27 | Ph.D. Eng. (Mechatronics and Aviation)
Education
Source: Self-asserted source
Pawel Platek

Military University of Technology in Warsaw: Warsaw, PL

2001-08-19 to 2006-06-30 | MSc (Mechatronics and Aviations)
Education
Source: Self-asserted source
Pawel Platek

Works (50 of 66)

Items per page:
Page 1 of 2

Combinatorial synthesis of solid-state hydrogen storage materials using a modified planetary ball mill

International Journal of Hydrogen Energy
2025-02 | Journal article
Contributors: Julien O. Fadonougbo; Katarzyna Szczepańska; Agata Baran; Iwona Wyrębska; Paweł Płatek; Jacek Janiszewski; Marek Polański
Source: check_circle
Crossref

Mechanical Behavior of 3D-Printed Zig-Zag Honeycomb Structures Made of BASF Ultrafuse 316L

Materials
2024-12-18 | Journal article
Contributors: Marcin Sarzyński; Paweł Płatek; Patryk Cedro; Urvashi Gunputh; Paul Wood; Alexis Rusinek
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Effects of Building Orientation and Raster Angle on the Mechanical Properties of Selected Materials Used in FFF Techniques

Materials
2024-12-12 | Journal article
Contributors: Piotr Dziewit; Kamil Rajkowski; Paweł Płatek
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Effect of Building Orientation and Raster Angle on Mechanical Properties of Selected Materials Used in FFF Techniques

2024-11-13 | Preprint
Contributors: Piotr Dziewit; Kamil Rajkowski; Paweł Płatek
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Influence of 3D-printed cellular shoe soles on plantar pressure during running − Experimental and numerical studies

Biocybernetics and Biomedical Engineering
2024-10 | Journal article
Contributors: Paweł Baranowski; Aleksandra Kapusta; Paweł Płatek; Marcin Sarzyński
Source: check_circle
Crossref

Technological and Mechanical Studies on Additively Manufactured Cellular Structures Made of the Ultrafuse 316L Composite Filament

Problems of Mechatronics Armament Aviation Safety Engineering
2024-09-30 | Journal article
Contributors: Kamil CIEPLAK (kamil.cieplak@wat.edu.pl); Paweł PŁATEK (pawel.platek@wat.edu.pl)
Source: check_circle
Crossref

3D Printing in the Fight Against Covid-19

Medical Devices: Evidence and Research
2023-07 | Journal article
Contributors: Paweł Płatek; Natalia Daniel; Kamil Cieplak; Marcin Sarzyński; Przemysław Siemiński; Bartosz Sadownik; Paweł Andruszkiewicz; Łukasz Wróblewski
Source: check_circle
Crossref

Microstructure Effects on the Machinability of AM-Produced Superalloys

Crystals
2023-07-31 | Journal article
Contributors: Paul Wood; José Díaz-Álvarez; Alexis Rusinek; Urvashi Gunputh; Slim Bahi; Antonio Díaz-Álvarez; Maria Henar Miguélez; Yiling Lu; Pawel Platek; Judyta Sienkiewicz
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

A Comparative Investigation of Properties of Metallic Parts Additively Manufactured through MEX and PBF-LB/M Technologies

Materials
2023-07-24 | Journal article
Contributors: Janusz Kluczyński; Katarzyna Jasik; Jakub Łuszczek; Bartłomiej Sarzyński; Krzysztof Grzelak; Tomáš Dražan; Zdeněk Joska; Ireneusz Szachogłuchowicz; Paweł Płatek; Marcin Małek
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Regeneration of the Damaged Parts with the Use of Metal Additive Manufacturing—Case Study

Materials
2023-05-16 | Journal article
Contributors: Piotr Sawczuk; Janusz Kluczyński; Bartłomiej Sarzyński; Ireneusz Szachogłuchowicz; Katarzyna Jasik; Jakub Łuszczek; Krzysztof Grzelak; Paweł Płatek; Janusz Torzewski; Marcin Małek
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

High strain rate effect on tensile ductility and fracture of AM fabricated Inconel 718 with voided microstructures

Materials & Design
2021-10 | Journal article
Part of ISSN: 0264-1275
Source: Self-asserted source
Pawel Platek
grade
Preferred source (of 2)‎

Problems of Deformation and Damage Studies of Additively Manufactured Regular Cellular Structures

Handbook of Damage Mechanics
2020 | Book chapter
Part of ISBN: 9781461489689
Part of ISBN: 9781461489689
Source: Self-asserted source
Pawel Platek

Machinability of INCONEL718 Alloy with a Porous Microstructure Produced by Laser Melting Powder Bed Fusion at Higher Energy Densities

Materials
2020-12-15 | Journal article
Contributors: Paul Wood; Antonio Díaz-Álvarez; José Díaz-Álvarez; María Henar Miguélez; Alexis Rusinek; Urvashi F. Gunputh; Gavin Williams; Slim Bahi; Judyta Sienkiewicz; Paweł Płatek
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Deformation Process of 3D Printed Structures Made from Flexible Material with Different Values of Relative Density

Polymers
2020-09-17 | Journal article
Contributors: Paweł Płatek; Kamil Rajkowski; Kamil Cieplak; Marcin Sarzyński; Jerzy Małachowski; Ryszard Woźniak; Jacek Janiszewski
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Investigations on Mechanical Properties of Lattice Structures with Different Values of Relative Density Made from 316L by Selective Laser Melting (SLM)

Materials
2020-05-11 | Journal article
Contributors: Paweł Płatek; Judyta Sienkiewicz; Jacek Janiszewski; Fengchun Jiang
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Investigations on Mechanical Properties of Lattice Structures with Different Values of Relative Density Made from 316L by Selective Laser Melting (SLM)

2020-05-07 | Other
Contributors: Paweł Płatek; Judyta Sienkiewicz; Jacek Janiszewski; Fengchun Jiang
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Influence of Selective Laser Melting Technological Parameters on the Mechanical Properties of Additively Manufactured Elements Using 316L Austenitic Steel

Materials
2020-03-22 | Journal article
Contributors: Janusz Kluczyński; Lucjan Śnieżek; Krzysztof Grzelak; Jacek Janiszewski; Paweł Płatek; Janusz Torzewski; Ireneusz Szachogłuchowicz; Krzysztof Gocman
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Influence of Selective Laser Melting Technological Parameters on the Mechanical Properties of Additively Manufactured Elements Using 316L Austenitic Steel

2020-03-01 | Other
Contributors: Janusz Kluczyński; Lucjan Śnieżek; Krzysztof Grzelak; Jacek Janiszewski; Paweł Płatek; Janusz Torzewski; Ireneusz Szachogłuchowicz; Krzysztof Gocman
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Investigations on the Mechanical Response of Gradient Lattice Structures Manufactured via SLM

Metals
2020-02-03 | Journal article
Contributors: Judyta Sienkiewicz; Paweł Płatek; Fengchun Jiang; Xiaojing Sun; Alexis Rusinek
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Deformation of honeycomb cellular structures manufactured with Laser Engineered Net Shaping (LENS) technology under quasi-static loading: Experimental testing and simulation

Additive Manufacturing
2019 | Journal article
EID:

2-s2.0-85056819866

Contributors: Baranowski, P.; Płatek, P.; Antolak-Dudka, A.; Sarzyński, M.; Kucewicz, M.; Durejko, T.; Małachowski, J.; Janiszewski, J.; Czujko, T.
Source: Self-asserted source
Pawel Platek via Scopus - Elsevier

Investigation on deformation process of cellular structures with gradient topology manufactured additively

AIP Conference Proceedings
2019 | Conference paper
EID:

2-s2.0-85066099279

Contributors: Płatek, P.; Baranowski, P.; Cieplak, K.; Sarzyński, M.; Sienkiewicz, J.; Janiszewski, J.; Małachowski, J.
Source: Self-asserted source
Pawel Platek via Scopus - Elsevier

LENS Ti-6Al-4V alloy material properties determination for LS-Dyna package

AIP Conference Proceedings
2019 | Conference paper
EID:

2-s2.0-85066081194

Contributors: Baranowski, P.; Małachowski, J.; Płatek, P.; Szafrańska, A.
Source: Self-asserted source
Pawel Platek via Scopus - Elsevier

Modelling and testing of 3D printed cellular structures under quasi-static and dynamic conditions

Thin-Walled Structures
2019 | Journal article
EID:

2-s2.0-85072182369

Contributors: Kucewicz, M.; Baranowski, P.; Stankiewicz, M.; Konarzewski, M.; Płatek, P.; Małachowski, J.
Source: Self-asserted source
Pawel Platek via Scopus - Elsevier

Internal Structure Research of 3D Printed Cellular Structures by Laser-ultrasonic Structuroscopy

2019 International Conference on Military Technologies (ICMT)
2019-05 | Conference paper
Source: Self-asserted source
Pawel Platek
grade
Preferred source (of 2)‎

Static and Dynamic Loading Behavior of Ti6Al4V Honeycomb Structures Manufactured by Laser Engineered Net Shaping (LENS<sup>TM</sup>) Technology

Materials
2019-04 | Journal article | Author
Contributors: Anna Antolak-Dudka; Pawel Platek; Tomasz Durejko; Paweł Baranowski; Jerzy Malachowski; Marcin Sarzyński; Tomasz Czujko
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 3)‎

Badania numeryczne procesu rozcalania siatkowego pocisku przechwytującego

Materiały Konferencyjne XII Międzynarodowa Konferencja Uzbrojeniowa nt. "Naukowe Aspekty Techniki Uzbrojenia i Bezpieczeństwa"
2018 | Conference paper | Author
SOURCE-WORK-ID:

5e7189c946e0fb0001d17f02

Contributors: Łukasz Szmit; Grzegorz Leśnik; Jakub Michalski; Pawel Platek
Source: check_circle
National Information Processing Institute

Key issues of design and numerical investigations of regular cellular structures manufactured additively of Ti6Al4V

41st Solid Mechanics Conference (SOLMECH 2018)
2018 | Journal article | Author
SOURCE-WORK-ID:

5ec0051dad49b31cced88aa6

Contributors: Tomasz Czujko; Tomasz Durejko; Jerzy Malachowski; Jacek Janiszewski; Paweł Baranowski; Anna Antolak-Dudka; Pawel Platek
Source: check_circle
National Information Processing Institute

Key issues of design and numerical investigations of regular cellular structures manufactured additively of Ti6Al4V

41st Solid Mechanics Conference
2018 | Conference paper | Author
SOURCE-WORK-ID:

5e71895a46e0fb0001d172f2

Contributors: Tomasz Czujko; Tomasz Durejko; Jerzy Malachowski; Jacek Janiszewski; Paweł Baranowski; Anna Antolak-Dudka; Pawel Platek
Source: check_circle
National Information Processing Institute

Mechanical response of Ti6Al4V regular cellular structures under drop-weight impact test loading conditions

The 5th International Conference on Protective Structures - ICPS5-2018
2018 | Conference paper | Author
SOURCE-WORK-ID:

5e71895b46e0fb0001d17318

Contributors: Piotr Dziewit; Tomasz Czujko; Tomasz Durejko; Jerzy Malachowski; Jacek Janiszewski; Paweł Baranowski; Tadeusz Szymczak; Anna Antolak-Dudka; Pawel Platek
Source: check_circle
National Information Processing Institute

Mechanical response of Ti6Al4V regular cellular structures under drop-weight impact test loading conditions

The 5th International Conference on Protective Structures - ICPS5-2018
2018 | Conference paper | Author
SOURCE-WORK-ID:

5ebff723ad49b31ccec49869

Contributors: Tomasz Czujko; Piotr Dziewit; Tomasz Durejko; Jerzy Malachowski; Jacek Janiszewski; Paweł Baranowski; Pawel Platek; Anna Antolak-Dudka; Tadeusz Szymczak
Source: check_circle
National Information Processing Institute

Mechanical response of Ti6Al4V regular cellular structures under drop-weight impact test loading conditions

Design, Experiment and Analysis of Protective Structures. Proceedings of the 5th International Conference on Protective Structures - ICPS5-2018
2018 | Book chapter | Author
SOURCE-WORK-ID:

5ebff4c4ad49b31ccec1ba53

Contributors: Tomasz Czujko; Piotr Dziewit; Tomasz Durejko; Jerzy Malachowski; Jacek Janiszewski; Paweł Baranowski; Pawel Platek; Anna Antolak-Dudka; Tadeusz Szymczak
Source: check_circle
National Information Processing Institute

Mechanical response of Ti6Al4V regular cellular structures under drop-weight impact test loading conditions

Design, Experiment and Analysis of Protective Structures : Proceedings of the 5th International Conference on Protective Structures ICPS5, 19-23 August 2018, Poznan, Poland
2018 | Book chapter | Author
SOURCE-WORK-ID:

5ebff4c2ad49b31ccec1b95e

Contributors: Anna Antolak; Tomasz Durejko; Paweł Baranowski; Tomasz Czujko; Piotr Dziewit; Tadeusz Szymczak; Jerzy Malachowski; Pawel Platek; Jacek Janiszewski
Source: check_circle
National Information Processing Institute

Modelling, and characterization of 3D printed cellular structures

Materials and Design
2018 | Journal article
EID:

2-s2.0-85041399275

Contributors: Kucewicz, M.; Baranowski, P.; Małachowski, J.; Popławski, A.; Płatek, P.
Source: Self-asserted source
Pawel Platek via Scopus - Elsevier

Issues of Designing and Testing Regular Cellular Structures Manufactured Using Additive Technologies

Problems of Mechatronics Armament Aviation Safety Engineering
2018-09 | Journal article
Part of ISSN: 2081-5891
Contributors: Jacek JANISZEWSKI; Paweł PŁATEK; Piotr DZIEWIT; Katarzyna SARZYŃSKA
Source: Self-asserted source
Pawel Platek via Crossref Metadata Search

Application of 3D Scanning Technology for Evaluation of Virtual Model of Gun Geometry

Problems of Mechatronics Armament Aviation Safety Engineering
2018-03 | Journal article
Part of ISSN: 2081-5891
Contributors: Bartosz FIKUS; Robert PASZKOWSKI; Paweł PŁATEK
Source: Self-asserted source
Pawel Platek via Crossref Metadata Search

MECHANICAL RESPONSE OF ADDITIVE MANUFACTURED REGULAR CELLULAR SCTRUCTURES IN QUASI-STATIC LOADING CONDITIONS - PART II: NUMERICAL INVESTIGATIONS

Proceedings of the 7th International Conference on Mechanics and Materials in Design
2017 | Journal article | Author
SOURCE-WORK-ID:

5ec0061ead49b31cced95c5a

Contributors: Piotr Dziewit; Jerzy Malachowski; Jacek Janiszewski; Robert Paszkowski; Marcin Szarzyński; Pawel Platek; Michal Grazka
Source: check_circle
National Information Processing Institute

MECHANICAL RESPONSE OF ADDITIVE MANUFACTURED REGULAR CELLULAR STRUCTURES UNDER QUASI-STATIC LOADING CONDITIONS – PART I EXPERIMENTAL INVESTIGATIONS

7th Internatonal Conference on Mechanics and Materials in Design
2017 | Conference paper | Author
SOURCE-WORK-ID:

5ec010b5ad49b31ccee0fc49

Contributors: Marcin Sarzyński; Piotr Dziewit; Jacek Janiszewski; Robert Paszkowski; Pawel Platek; Michal Grazka
Source: check_circle
National Information Processing Institute

MECHANICAL RESPONSE OF ADDITIVE MANUFACTURED REGULAR CELLULAR STRUCTURES UNDER QUASI-STATIC LOADING CONDITIONS – PART I EXPERIMENTAL INVESTIGATIONS

7th Internatonal Conference on Mechanics and Materials in Design
2017 | Conference paper | Author
SOURCE-WORK-ID:

5e71794a46e0fb0001cf1aa6

Contributors: Marcin Sarzyński; Piotr Dziewit; Jacek Janiszewski; Robert Paszkowski; Pawel Platek; Michal Grazka
Source: check_circle
National Information Processing Institute

MECHANICAL RESPONSE OF ADDITIVE MANUFACTURED REGULAR CELLULAR STRUCTURES UNDER QUASISTATIC LOADING CONDITIONS – PART II NUMERICAL INVESTIGATIONS

7th Internatonal Conference on Mechanics and Materials in Design
2017 | Conference paper | Author
SOURCE-WORK-ID:

5ec010b5ad49b31ccee0fc48

Contributors: Marcin Sarzyński; Piotr Dziewit; Jerzy Malachowski; Jacek Janiszewski; Robert Paszkowski; Pawel Platek; Michal Grazka
Source: check_circle
National Information Processing Institute

MECHANICAL RESPONSE OF ADDITIVE MANUFACTURED REGULAR CELLULAR STRUCTURES UNDER QUASISTATIC LOADING CONDITIONS – PART II NUMERICAL INVESTIGATIONS

7th Internatonal Conference on Mechanics and Materials in Design
2017 | Conference paper | Author
SOURCE-WORK-ID:

5e71794a46e0fb0001cf1a9d

Contributors: Marcin Sarzyński; Piotr Dziewit; Jerzy Malachowski; Jacek Janiszewski; Robert Paszkowski; Pawel Platek; Michal Grazka
Source: check_circle
National Information Processing Institute

ANALYSIS OF MAN-PORTABLE SYSTEMS INTERCEPTING MINIATURE UNMANNED AERIAL VEHICLES

PROBLEMY TECHNIKI UZBROJENIA
2017-10-09 | Journal article
Part of ISSN: 1230-3801
Contributors: Grzegorz Leśnik; Paweł Płatek; Łukasz Szmit; Marta Czyżewska; Michał Grązka; Jakub Michalski
Source: Self-asserted source
Pawel Platek via Crossref Metadata Search
grade
Preferred source (of 2)‎

Application of 3D scanning technology in evaluation of virtual model of gun geometry

Międzynarodowa Konferencja Uzbrojeniowa nt. Naukowe Aspekty Techniki Uzbrojenia i Bezpieczeństwa
2016 | Conference paper | Author
SOURCE-WORK-ID:

5e71832f46e0fb0001d098c5

Contributors: Bartosz Fikus; Robert Paszkowski; Pawel Platek
Source: check_circle
National Information Processing Institute

Assessment of the biomechanical parameters of the disabled driver during frontal crash

Advances in Mechanics: Theoretical, Computational and Interdisciplinary Issues - 3rd Polish Congress of Mechanics, PCM 2015 and 21st International Conference on Computer Methods in Mechanics, CMM 2015
2016 | Conference paper
EID:

2-s2.0-85015107708

Contributors: Sybilski, K.; Małachowski, J.; Baranowski, P.; Płatek, P.
Source: Self-asserted source
Pawel Platek via Scopus - Elsevier

Experimental Investigations of Motion of Slide of Selected Pistol Types

Problems of Mechatronics Armament Aviation Safety Engineering
2016 | Journal article
Part of ISSN: 2081-5891
Contributors: Bartosz FIKUS; Wojciech KOPERSKI; Paweł PŁATEK; Zbigniew SURMA; Radosław TRĘBIŃSKI
Source: Self-asserted source
Pawel Platek via Crossref Metadata Search
grade
Preferred source (of 2)‎

MODUŁOWOŚĆ BRONI PROJEKTU ROZWOJOWEGO „RAWAT”

Międzynarodowa Konferencja Uzbrojeniowa nt. Naukowe Aspekty Techniki Uzbrojenia i Bezpieczeństwa
2016 | Conference paper | Author
SOURCE-WORK-ID:

5e71654f46e0fb0001cc74db

Contributors: Łukasz Szmit; Mirosław Zahor; Pawel Platek; Ryszard Bogumił Woźniak
Source: check_circle
National Information Processing Institute

Numerical and experimental failure analysis of rifle extractor

Engineering Failure Analysis
2016 | Journal article
EID:

2-s2.0-84955251944

Contributors: Malachowski, J.; Damaziak, K.; Platek, P.; Sarzynski, M.; Kupidura, P.; Wozniak, R.; Zahor, M.
Source: Self-asserted source
Pawel Platek via Scopus - Elsevier

Pressurised-cell test stand with oscillating heating for investigation heat transfer phenomena in metal hydride beds

International Journal of Hydrogen Energy
2016 | Journal article
EID:

2-s2.0-84995959494

Contributors: Panas, A.J.; Fikus, B.; Płatek, P.; Kunce, I.; Witek, K.; Kuziora, P.; Olejarczyk, A.; Dyjak, S.; Michalska-Domańska, M.; Jaroszewicz, L. et al.
Source: Self-asserted source
Pawel Platek via Scopus - Elsevier

Assessment of the biomechanical parameters of the disabled driv ers during frontal crash

Assessment of the biomechanical parameters of the disabled driver during frontal crash 3rd Polish Congress of Mechanics (PCM)
2015 | Conference paper | Author
SOURCE-WORK-ID:

5e7150dd46e0fb0001c97300

Contributors: Kamil Sybilski; Jerzy Malachowski; Paweł Baranowski; Pawel Platek
Source: check_circle
National Information Processing Institute

Numerical study of modular 5.56 mm standard assault rifle referring to dynamic characteristics

Defence Science Journal
2015 | Journal article
EID:

2-s2.0-84946713395

Contributors: Platek, P.; Damaziak, K.; Malachowski, J.; Kupidura, P.; Wozniak, R.; Zahor, M.
Source: Self-asserted source
Pawel Platek via Scopus - Elsevier

Odwzorowanie geometrii wnętrza pojazdu z wykorzystaniem techniki inżynierii odwrotnej

Transport Przemysłowy i Maszyny Robocze
2014 | Journal article | Author
SOURCE-WORK-ID:

5e7145a746e0fb0001c7a1ab

Contributors: Kamil Sybilski; Jerzy Malachowski; Pawel Platek
Source: check_circle
National Information Processing Institute
Items per page:
Page 1 of 2

Peer review (14 reviews for 9 publications/grants)

Review activity for Additive manufacturing. (2)
Review activity for Advanced engineering materials (2)
Review activity for Journal of dynamic behavior of materials. (1)
Review activity for Journal of imaging. (1)
Review activity for Journal of manufacturing and materials processing. (1)
Review activity for Journal of the Brazilian Society of Mechanical Sciences and Engineering. (1)
Review activity for Materials letters. (1)
Review activity for Polymer testing (1)
Review activity for Thin-walled structures (4)