Personal information

Activities

Works (50 of 159)

Items per page:
Page 1 of 4

Estimation of residual stresses by inverse analysis based on experimental data from sample removal for “small punch” tests

Engineering Structures
2017 | Journal article
EID:

2-s2.0-85009344001

Contributors: Buljak, V.; Cocchetti, G.; Cornaggia, A.; Maier, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Assessment of residual stresses and mechanical characterization of materials by "hole drilling" and indentation tests combined and by inverse analysis

Mechanics Research Communications
2015 | Journal article
EID:

2-s2.0-84925325859

Contributors: Buljak, V.; Cocchetti, G.; Cornaggia, A.; Maier, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Materials mechanical characterizations and structural diagnoses by inverse analyses

Handbook of Damage Mechanics: Nano to Macro Scale for Materials and Structures
2015 | Book
EID:

2-s2.0-84945336681

Contributors: Vladimir, B.; Cocchetti, G.; Cornaggia, A.; Maier, G.; Novati, G.; Garbowski, T.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Mechanical characterization of anisotropic elasto-plastic materials by indentation curves only

Meccanica
2014 | Journal article
EID:

2-s2.0-84904753562

Contributors: Buljak, V.; Bocciarelli, M.; Maier, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Mechanical characterization of foils with compression in their planes

Mechanics of Advanced Materials and Structures
2014 | Journal article
EID:

2-s2.0-84904119017

Contributors: Cocchetti, G.; Mahini, M.R.; Maier, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Mechanical characterization of materials and diagnosis of structures by inverse analyses: Some innovative procedures and applications

International Journal of Computational Methods
2014 | Journal article
EID:

2-s2.0-84903374606

Contributors: Maier, G.; Buljak, V.; Garbowski, T.; Cocchetti, G.; Novati, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Calibration of brittle fracture models by sharp indenters and inverse analysis

International Journal of Fracture
2013 | Journal article
EID:

2-s2.0-84891024659

Contributors: Buljak, V.; Cocchetti, G.; Maier, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Foreword

Direct Methods for Limit States in Structures and Materials
2013 | Book
EID:

2-s2.0-84930881864

Contributors: Maier, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Erratum: Identification of residual stresses by instrumented elliptical indentation and inverse analysis (Mechanics Research Communications (2012) 41 (21-29))

Mechanics Research Communications
2012 | Journal article
EID:

2-s2.0-84868211948

Contributors: Buljak, V.; Maier, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Identification of residual stresses by instrumented elliptical indentation and inverse analysis

Mechanics Research Communications
2012 | Journal article
EID:

2-s2.0-84859440731

Contributors: Buljak, V.; Maier, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

On calibration of orthotropic elastic-plastic constitutive models for paper foils by biaxial tests and inverse analyses

Structural and Multidisciplinary Optimization
2012 | Journal article
EID:

2-s2.0-84862151879

Contributors: Garbowski, T.; Maier, G.; Novati, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Synergic combinations of computational methods and experiments for structural diagnoses

Advanced Structured Materials
2012 | Book
EID:

2-s2.0-84870526431

Contributors: Maier, G.; Bolzon, G.; Buljak, V.; Garbowski, T.; Miller, B.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Assessment of elastic-plastic material parameters comparatively by three procedures based on indentation test and inverse analysis

Inverse Problems in Science and Engineering
2011 | Journal article
EID:

2-s2.0-79961165183

Contributors: Bolzon, G.; Buljak, V.; Maier, G.; Miller, B.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Diagnosis of concrete dams by flat-jack tests and inverse analyses based on proper orthogonal decomposition

Journal of Mechanics of Materials and Structures
2011 | Journal article
EID:

2-s2.0-79960501062

Contributors: Garbowski, T.; Maier, G.; Novati, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Proper Orthogonal Decomposition and Radial Basis Functions in material characterization based on instrumented indentation

Engineering Structures
2011 | Journal article
EID:

2-s2.0-78650522031

Contributors: Buljak, V.; Maier Giulio, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Generalized limit analysis in poroplasticity by mathematical programming

Archive of Applied Mechanics
2010 | Journal article
EID:

2-s2.0-71449106754

Contributors: Ardito, R.; Cocchetti, G.; Maier, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

An inverse analysis procedure for the material parameter identification of elastic-plastic free-standing foils

Structural and Multidisciplinary Optimization
2009 | Journal article
EID:

2-s2.0-78651333866

Contributors: Ageno, M.; Bolzon, G.; Maier, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Proper orthogonal decomposition in direct and inverse elastic-plastic analysis

Computational Plasticity X - Fundamentals and Applications
2009 | Conference paper
EID:

2-s2.0-84859121064

Contributors: Bolzon, G.; Buljak, V.; Maier, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

A constitutive model of metal-ceramic functionally graded material behavior: Formulation and parameter identification

Computational Materials Science
2008 | Journal article
EID:

2-s2.0-44649176395

Contributors: Bocciarelli, M.; Bolzon, G.; Maier, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Diagnostic analysis of concrete dams based on seasonal hydrostatic loading

Engineering Structures
2008 | Journal article
EID:

2-s2.0-54949096923

Contributors: Ardito, R.; Maier, G.; Massalongo, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Dilatometric tests combined with computer simulations and parameter identification for in-depth diagnostic analysis of concrete dams

Life-Cycle Civil Engineering - Proceedings of the 1st International Symposium on Life-Cycle Civil Engineering, IALCCE '08
2008 | Conference paper
EID:

2-s2.0-79952143108

Contributors: Zirpoli, A.; Maier, G.; Novati, G.; Garbowski, T.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

On structural safety assessment by load factor maximization in piecewise linear plasticity

European Journal of Mechanics, A/Solids
2008 | Journal article
EID:

2-s2.0-46749125839

Contributors: Ardito, R.; Cocchetti, G.; Maier, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

On the calibration of elastic-plastic models for metal-ceramic functionally graded materials

AIP Conference Proceedings
2008 | Conference paper
EID:

2-s2.0-40449098627

Contributors: Bocciarelli, M.; Bolzon, G.; Maier, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

3.12 - Direct Methods of Limit and Shakedown Analysis

Comprehensive Structural Integrity
2007 | Book
EID:

2-s2.0-84903406764

Contributors: Maier, G.; Pastor, J.; Ponter, A.R.S.; Weichert, D.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Flat-jack tests and inverse analysis for the identification of stress states and elastic properties in concrete dams

Meccanica
2007 | Journal article
EID:

2-s2.0-36148962388

Contributors: Fedele, R.; Maier, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

In situ assessment of concrete plastic properties by flat-jack tests

Computational Plasticity - Fundamentals and Applications, COMPLAS IX
2007 | Conference paper
EID:

2-s2.0-84857174126

Contributors: Fedele, R.; Maier, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Indentation and imprint mapping method for identification of residual stresses

Computational Materials Science
2007 | Journal article
EID:

2-s2.0-33847649599

Contributors: Bocciarelli, M.; Maier, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Calibration of fracture parameters by instrumented indentation and test simulation

Fracture of Nano and Engineering Materials and Structures - Proceedings of the 16th European Conference of Fracture
2006 | Conference paper
EID:

2-s2.0-84908265194

Contributors: Bocciarelli, M.; Bolzon, G.; Maier, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Health assessment of concrete dams by overall inverse analyses and neural networks

International Journal of Fracture
2006 | Journal article
EID:

2-s2.0-33644835879

Contributors: Fedele, R.; Maier, G.; Miller, B.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Inverse analyses in fracture mechanics

International Journal of Fracture
2006 | Journal article
EID:

2-s2.0-33745267245

Contributors: Maier, G.; Bocciarelli, M.; Bolzon, G.; Fedele, R.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Stochastic calibration of local constitutive models through measurements at the macroscale in heterogeneous media

Computer Methods in Applied Mechanics and Engineering
2006 | Journal article
EID:

2-s2.0-33744923984

Contributors: Fedele, R.; Maier, G.; Whelan, M.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Constitutive model calibration for railway wheel steel through tension-torsion tests

Computers and Structures
2005 | Journal article
EID:

2-s2.0-14844328694

Contributors: Fedele, R.; Filippini, M.; Maier, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

In situ mechanical characterisation of dam concrete and stress state by dilatometric measurements and inverse analysis

11th International Conference on Fracture 2005, ICF11
2005 | Conference paper
EID:

2-s2.0-84869769843

Contributors: Maier, G.; Lettieri, M.A.; Piola, L.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Parameter identification in anisotropic elastoplasticity by indentation and imprint mapping

Mechanics of Materials
2005 | Journal article
EID:

2-s2.0-18444380897

Contributors: Bocciarelli, M.; Bolzon, G.; Maier, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Material model calibration by indentation, imprint mapping and inverse analysis

International Journal of Solids and Structures
2004 | Journal article
EID:

2-s2.0-2142704323

Contributors: Bolzon, G.; Maier, G.; Panico, M.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Shakedown analysis of train wheels by Fourier series and nonlinear programming

Engineering Structures
2004 | Journal article
EID:

2-s2.0-1442264797

Contributors: Bocciarelli, M.; Cocchetti, G.; Maier, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Elastic-plastic and limit-state analyses of frames with softening plastic-hinge models by mathematical programming

International Journal of Solids and Structures
2003 | Journal article
EID:

2-s2.0-0242274303

Contributors: Cocchetti, G.; Maier, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Erratum: On some issues in shakedown analysis (ASME Journal of Applied Mechanics (2001) 68 (799-808))

Journal of Applied Mechanics, Transactions ASME
2002 | Journal article
EID:

2-s2.0-0036739490

Contributors: Maier, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Parameter identification of a cohesive crack model by Kalman filter

Computer Methods in Applied Mechanics and Engineering
2002 | Journal article
EID:

2-s2.0-0037066634

Contributors: Bolzon, G.; Fedele, R.; Maier, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Piecewise linear models for interfaces and mixed mode cohesive cracks

CMES - Computer Modeling in Engineering and Sciences
2002 | Journal article
EID:

2-s2.0-0037586621

Contributors: Cocchetti, G.; Maier, G.; Shen, X.P.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Shakedown theorems in poroplastic dynamics

Atti della Accademia Nazionale dei Lincei, Classe di Scienze Fisiche, Matematiche e Naturali, Rendiconti Lincei Matematica e Applicazioni
2002 | Journal article
EID:

2-s2.0-84887422767

Contributors: Cocchetti, G.; Maier, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Strength of periodic elastic-brittle composites evaluated through homogenization and parameter identification

European Journal of Mechanics, A/Solids
2002 | Journal article
EID:

2-s2.0-0242377422

Contributors: Bolzon, G.; Ghilotti, D.; Maier, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

On some issues in shakedown analysis

Journal of Applied Mechanics, Transactions ASME
2001 | Journal article
EID:

2-s2.0-0011219829

Contributors: Maier, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Extremum and saddle-point theorems for elastic solids with dissipative displacement discontinuities

Archives of Mechanics
2000 | Journal article
EID:

2-s2.0-0003150960

Contributors: Carini, A.; Maier, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Kinematic limit analysis of periodic heterogeneous media

CMES - Computer Modeling in Engineering and Sciences
2000 | Journal article
EID:

2-s2.0-0041827662

Contributors: Carvelli, V.; Maier, G.; Taliercio, A.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Shakedown analysis in poroplasticity by linear programming

International Journal for Numerical Methods in Engineering
2000 | Journal article
EID:

2-s2.0-0033883234

Contributors: Cocchetti, G.; Maier, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Analysis of ductile fracture in damaged pipelines by a geometric parameter method

Engineering Structures
1999 | Journal article
EID:

2-s2.0-0033004309

Contributors: Corigliano, A.; Maier, G.; Mariani, S.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Dynamic elastic-plastic analysis by a symmetric Galerkin boundary element method with time-independent kernels

Computer Methods in Applied Mechanics and Engineering
1999 | Journal article
EID:

2-s2.0-0033116047

Contributors: Frangi, A.; Maier, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Poroelastic finite element analysis of a bone specimen under cyclic loading

Journal of Biomechanics
1999 | Journal article
EID:

2-s2.0-0033081653

Contributors: Manfredini, P.; Cocchetti, G.; Maier, G.; Redaelli, A.; Montevecchi, F.M.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier

Shakedown analysis of defective pressure vessels by a kinematic approach

Archive of Applied Mechanics
1999 | Journal article
EID:

2-s2.0-0000179358

Contributors: Carvelli, V.; Cen, Z.Z.; Liu, Y.; Maier, G.
Source: Self-asserted source
Giulio Maier via Scopus - Elsevier
Items per page:
Page 1 of 4