Personal information

Other IDs

Scopus Author ID: 36462640900
ResearcherID: Q-2724-2018

Keywords

metrology, surface metrology, surface geometric structure, measurements, surface analysis, tribology, wear

Activities

Collapse all

Employment (1)

Cracow University of Technology: Cracow, PL

(Faculty of Mechanical Department)
Employment
Source: Self-asserted source
Magdalena Niemczewska-Wójcik

Education and qualifications (1)

Cracow University of Technology: Cracow, PL

Ph.D. (Faculty of Mechanical Engineering)
Education
Source: Self-asserted source
Magdalena Niemczewska-Wójcik

Works (23)

Surface Topography and Tribological Properties of Cutting Tool Coatings

Advances in Science and Technology Research Journal
2023-12-01 | Journal article
DOI: 10.12913/22998624/173214
Contributors: Magdalena Niemczewska-Wójcik; Monika Madej
Source: check_circle
Crossref

Properties of coatings used in biotribological systems

Polish Society for Biomaterials, Faculty of Materials Science and Ceramics at AGH-UST, Scientific Publishing House AKAPIT
2022 | Journal article
DOI: 10.34821/ENG.BIOMAT.164.2022.25-31
Contributors: Katarzyna Piotrowska; Monika Madej; Magdalena Niemczewska-Wójcik
Source: Self-asserted source
Magdalena Niemczewska-Wójcik

CONCEPT FOR A RESEARCH METHODOLOGY OF SURFACE TOPOGRAPHY – TESTING AND ANALYSIS OF TRIBOLOGICAL WEAR TRACES

Tribologia
2022-12-30 | Journal article
DOI: 10.5604/01.3001.0016.1607
Part of ISSN: 0208-7774
Part of ISSN: 1732-422X
Contributors: Magdalena Niemczewska-Wójcik
Source: Self-asserted source
Magdalena Niemczewska-Wójcik

Dry Sliding Wear Studies on Sillimanite and B4C Reinforced Aluminium Hybrid Composites Fabricated by Vacuum Assisted Stir Casting Process

Materials
2022-12-27 | Journal article
DOI: 10.3390/ma16010259
Contributors: Manickaraj Pethuraj; Marimuthu Uthayakumar; Shanmugavel Rajesh; Mohd Shukry Abdul Majid; Sivaprakasam Rajakarunakaran; Magdalena Niemczewska-Wójcik
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

A comparative study of the surface topography in dry and wet turning using the confocal and interferometric modes

Measurement
2022-11 | Journal article
DOI: 10.1016/j.measurement.2022.112144
Part of ISSN: 0263-2241
Contributors: Magdalena Niemczewska-Wójcik; Monika Madej; Joanna Kowalczyk; Katarzyna Piotrowska
Source: Self-asserted source
Magdalena Niemczewska-Wójcik

CONCEPT FOR AN ADVANCED TRIBOLOGICAL SYSTEMS RESEARCH METHODOLOGY

Tribologia
2022-11-30 | Journal article
DOI: 10.5604/01.3001.0016.1035
Part of ISSN: 0208-7774
Part of ISSN: 1732-422X
Contributors: Magdalena Niemczewska-Wójcik; Magdalena A. Osiewicz
Source: Self-asserted source
Magdalena Niemczewska-Wójcik

Investigation of the Surface Topography of Titanium Alloys Applied to Friction Components

Advances in Science and Technology Research Journal
2022-04-01 | Journal article
DOI: 10.12913/22998624/147070
Contributors: Grzegorz Gawłowski; Magdalena Niemczewska-Wójcik
Source: check_circle
Crossref

Characteristics of the Surface Topography and Tribological Properties of Reinforced Aluminum Matrix Composite

Materials
2022-01-04 | Journal article
DOI: 10.3390/ma15010358
Contributors: Magdalena Niemczewska-Wójcik; Manickaraj Pethuraj; Marimuthu Uthayakumar; Mohd Shukry Abdul Majid
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Stereometric and Tribometric Studies of Polymeric Pin and Ceramic Plate Friction Pair Components

Materials
2021-02 | Journal article | Author
DOI: 10.3390/ma14040839
Contributors: Magdalena Niemczewska-Wójcik; Artur Wójcik
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 3)‎

The multi-scale analysis of ceramic surface topography created in abrasive machining process

Measurement
2020-12 | Journal article
DOI: 10.1016/j.measurement.2020.108217
Part of ISSN: 0263-2241
Contributors: Magdalena Niemczewska-Wójcik; Artur Wójcik
Source: Self-asserted source
Magdalena Niemczewska-Wójcik

Microscopic analysis of the Sol-Gel alumina grinding wheel after the introduction of a synthetic organosilicon polymer-based impregnate dedicated for near dry grinding processes

International Journal of Surface Science and Engineering
2019 | Journal article
DOI: 10.1504/ijsurfse.2019.10024005
Part of ISSN: 1749-785X
Part of ISSN: 1749-7868
Source: Self-asserted source
Magdalena Niemczewska-Wójcik

Wear studies of copper-fly ash composite under dry sliding conditions

Materials Research Express
2019-09-13 | Journal article
DOI: 10.1088/2053-1591/ab3ffe
Part of ISSN: 2053-1591
Source: Self-asserted source
Magdalena Niemczewska-Wójcik

The machining process and multi-sensor measurements of the friction components of total hip joint prosthesis

Measurement
2018-02 | Journal article
DOI: 10.1016/j.measurement.2017.10.045
Part of ISSN: 0263-2241
Contributors: Magdalena Niemczewska-Wójcik; Artur Wójcik
Source: Self-asserted source
Magdalena Niemczewska-Wójcik via Crossref Metadata Search

Assessment of free-form surfaces’ reconstruction accuracy

Metrology and Measurement Systems
2017 | Journal article
DOI: 10.1515/mms-2017-0035
EID:

2-s2.0-85029797647
Contributors: Wójcik, A.; Niemczewska-Wójcik, M.; Sładek, J.
Source: Self-asserted source
Magdalena Niemczewska-Wójcik via Scopus - Elsevier

Multi-sensor measurements of titanium alloy surface texture formed at subsequent operations of precision machining process

Measurement: Journal of the International Measurement Confederation
2017 | Journal article
DOI: 10.1016/j.measurement.2016.10.049
EID:

2-s2.0-84994318588
Contributors: Niemczewska-Wójcik, M.
Source: Self-asserted source
Magdalena Niemczewska-Wójcik via Scopus - Elsevier

Surface texturing by dimple formation in TiAlSiZr alloy using μ-EDM

Journal of the Australian Ceramic Society
2017 | Journal article
DOI: 10.1007/s41779-017-0095-x
EID:

2-s2.0-85029601898
Contributors: Thirumalai Kumaran, S.; Ko, T.J.; Uthayakumar, M.; Adam Khan, M.; Niemczewska-Wójcik, M.
Source: Self-asserted source
Magdalena Niemczewska-Wójcik via Scopus - Elsevier

The surface topography of a metallic femoral head and its influence on the wear mechanism of a polymeric acetabulum

Archives of Civil and Mechanical Engineering
2017 | Journal article
DOI: 10.1016/j.acme.2016.10.010
EID:

2-s2.0-84998679011
Contributors: Niemczewska-Wójcik, M.; Piekoszewski, W.
Source: Self-asserted source
Magdalena Niemczewska-Wójcik via Scopus - Elsevier

Wear mechanisms and surface topography of artificial hip joint components at the subsequent stages of tribological tests

Measurement: Journal of the International Measurement Confederation
2017 | Journal article
DOI: 10.1016/j.measurement.2017.04.045
EID:

2-s2.0-85019083877
Contributors: Niemczewska-Wójcik, M.
Source: Self-asserted source
Magdalena Niemczewska-Wójcik via Scopus - Elsevier

The surface texture and its influence on the tribological characteristics of a friction pair: metal–polymer

Archives of Civil and Mechanical Engineering
2017-02 | Journal article
DOI: 10.1016/j.acme.2016.10.011
Contributors: Magdalena Niemczewska-Wójcik; Witold Piekoszewski
Source: check_circle
Crossref

Product quality assessment - Measurement and analysis of surface topography

Metrology and Measurement Systems
2014 | Journal article
DOI: 10.2478/mms-2014-0023
EID:

2-s2.0-84900013208
Contributors: Niemczewska-Wójcik, M.; Sładek, J.; Tabaka, M.; Wójcik, A.
Source: Self-asserted source
Magdalena Niemczewska-Wójcik via Scopus - Elsevier

The measurement and analysis of surface geometric structure of ceramic femoral heads

Scanning
2014 | Journal article
DOI: 10.1002/sca.21106
EID:

2-s2.0-84893775543
Contributors: Niemczewska-Wõjcik, M.; Gawlik, J.; Sładek, J.
Source: Self-asserted source
Magdalena Niemczewska-Wójcik via Scopus - Elsevier

The investigation of wear tracks with the use of noncontact measurement methods

Archives of Civil and Mechanical Engineering
2013 | Journal article
DOI: 10.1016/j.acme.2013.01.005
EID:

2-s2.0-84875908250
Contributors: Niemczewska-Wójcik, M.; Mańkowska-Snopczyńska, A.; Piekoszewski, W.
Source: Self-asserted source
Magdalena Niemczewska-Wójcik via Scopus - Elsevier

The influence of the surface geometric structure on the functionality of implants

Wear
2011 | Journal article
DOI: 10.1016/j.wear.2010.06.013
EID:

2-s2.0-79957514355
Contributors: Niemczewska-Wójcik, M.
Source: Self-asserted source
Magdalena Niemczewska-Wójcik via Scopus - Elsevier

Peer review (50 reviews for 18 publications/grants)

Review activity for Archives of Civil and Mechanical Engineering. (2)
Review activity for Bulletin of the Polish Academy of Sciences. (2)
Review activity for Ceramics international. (1)
Review activity for Coatings. (3)
Review activity for IEEE transactions on instrumentation and measurement. (3)
Review activity for IJIDEM. (1)
Review activity for Journal of alloys and metallurgical systems. (2)
Review activity for Journal of manufacturing and materials processing. (4)
Review activity for Lubricants. (3)
Review activity for Materials today communications. (1)
Review activity for Materials. (6)
Review activity for Measurement. (7)
Review activity for Membranes. (1)
Review activity for Metals. (5)
Review activity for Micromachines. (3)
Review activity for Results in engineering. (1)
Review activity for Sensors. (1)
Review activity for Wear. (4)
How many people are using ORCID?