Personal information

Other IDs

Scopus Author ID: 39261967200
Scopus Author ID: 55535547700

Activities

Collapse all

Works (50 of 61)

Items per page:
Page 1 of 2

Mechanical damage induction mechanisms and process optimization of drilling considering cortical bone material heterogeneity

Materials Today Communications
2025-02 | Journal article
DOI: 10.1016/j.mtcomm.2025.111606
Contributors: Shaokang Song; Jun Zhao; Anhai Li; Shihua Zhang; Xianshun Sun
Source: check_circle
Crossref

Simulation Study on Residual Stress Distribution of Machined Surface Layer in Two-Step Cutting of Titanium Alloy

Materials
2024-08-29 | Journal article
DOI: 10.3390/ma17174283
Contributors: Jingyi Wang; Bo Kong; Shulei Wei; Jian Zang; Anhai Li
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Effect of machined surface integrity on fatigue resistance of aluminum-silicon alloy ZL109

Materials Today Communications
2023-12 | Journal article
DOI: 10.1016/j.mtcomm.2023.107165
Contributors: Yuquan Wang; Anhai Li; Hu Sun; Kai Wang
Source: check_circle
Crossref

Laser Processing and Multi-Energy Field Manufacturing of High-Performance Materials

Materials
2023-08-31 | Journal article
DOI: 10.3390/ma16175991
Contributors: Xiaoxiao Chen; Yaou Zhang; Anhai Li
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Adjusting machined surface integrity of aluminum–silicon alloy through step-by-step feed cutting and multi-step finish cutting method

The International Journal of Advanced Manufacturing Technology
2023-06 | Journal article
DOI: 10.1007/s00170-023-11327-y
Contributors: Zhaohui Guo; Xiaoli Zhu; Hu Sun; Anhai Li
Source: check_circle
Crossref

Performance of High-Speed Steel Drills in Wet Drilling Inconel 718 Superalloy

Experimental Techniques
2023-04 | Journal article
DOI: 10.1007/s40799-022-00560-x
Contributors: J.Y. Liu; A.H. Li; J.C. Zhang; Y.Q. Wang; Z.H. Feng
Source: check_circle
Crossref

Preparation of In Situ Growth Multiscale β-Sialon Grain-Reinforced Al2O3-Based Composite Ceramic Tool Materials

Materials
2023-03-14 | Journal article
DOI: 10.3390/ma16062333
Contributors: Jian Zhu; Yunna Xue; Xiaolan Bai; Xuehui Shen; Jianqun He; Yu Zhang; Anhai Li
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Effect of cutting process adjustment on crystallographic texture of machined surface layer of titanium alloy

Archives of Civil and Mechanical Engineering
2022-11-08 | Journal article
DOI: 10.1007/s43452-022-00563-w
Contributors: Anhai Li; Rufeng Zhang; Jinyuan Liu; Xuhao Song
Source: check_circle
Crossref

Microstructure and Properties of WC/Ni-Based Laser-Clad Coatings with Different WC Content Values

Materials
2022-09-11 | Journal article
DOI: 10.3390/ma15186309
Contributors: Xuehui Shen; Hao Peng; Yunna Xue; Baolin Wang; Guosheng Su; Jian Zhu; Anhai Li
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Surface Properties of Medium-Entropy Alloy Coatings Prepared through a Combined Process of Laser Cladding and Ultrasonic Burnishing

Materials
2022-08-13 | Journal article
DOI: 10.3390/ma15165576
Contributors: Xuehui Shen; Chang Liu; Baolin Wang; Yu Zhang; Guosheng Su; Anhai Li
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Effect of surface roughness on stress concentration factor of machined surface and cutting parameter optimization in boring of Al-Si piston alloy

The International Journal of Advanced Manufacturing Technology
2022-07 | Journal article
DOI: 10.1007/s00170-022-09597-z
Contributors: Shaolei Gai; Anhai Li; Jinyuan Liu; Zhaochao Gong; Jun Zhao
Source: check_circle
Crossref

Effect of alloying elements on surface temperature field of aluminum piston in diesel engine

Engineering Failure Analysis
2022-04 | Journal article
DOI: 10.1016/j.engfailanal.2021.106020
Contributors: Tao Liu; Anhai Li; Chuanliang Zhu; Wentao Yuan
Source: check_circle
Crossref

Step-dependent grain refinement and micro-harness evolution during chip formation process in orthogonal cutting of titanium alloy Ti-6Al-4V

The International Journal of Advanced Manufacturing Technology
2022-04 | Journal article
DOI: 10.1007/s00170-021-08511-3
Contributors: Minghang Lv; Anhai Li; Dejun Ge; Rufeng Zhang
Source: check_circle
Crossref

Surface quality adjustment and controlling mechanism of machined surface layer in two-step milling of titanium alloy

The International Journal of Advanced Manufacturing Technology
2022-03 | Journal article
DOI: 10.1007/s00170-021-08359-7
Contributors: Rufeng Zhang; Anhai Li; Xuhao Song
Source: check_circle
Crossref

Effect of Surface Micro-Hardness Change in Multistep Machining on Friction and Wear Characteristics of Titanium Alloy

Applied Sciences
2021-08 | Journal article | Author
DOI: 10.3390/app11167471
Contributors: Guanming Hou; Anhai Li
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎

Tool condition monitoring in milling process using multifractal detrended fluctuation analysis and support vector machine

The International Journal of Advanced Manufacturing Technology
2020-09-24 | Journal article
DOI: 10.1007/s00170-020-05931-5
Contributors: Jingchao Guo; Anhai Li; Rufeng Zhang
Source: check_circle
Crossref

Surface integrity enhancement of ZL109 aluminum-silicon piston alloy employing the forward and reverse finish cutting method

The International Journal of Advanced Manufacturing Technology
2020-03-18 | Journal article
DOI: 10.1007/s00170-020-05039-w
Contributors: Hu Sun; Anhai Li; Yonghui Zhou; Xuhao Song; Chaoyi Xue
Source: check_circle
Crossref

Dry wear characteristics of machined ZL109 aluminum-silicon alloy surface under unidirectional and reciprocating rolling-contact friction

Surface Topography: Metrology and Properties
2020-01-10 | Journal article
DOI: 10.1088/2051-672X/ab61e6
Contributors: Hu Sun; Anhai Li; Yonghui Zhou; Xiliang Liao; Dejun Ge
Source: check_circle
Crossref

Abrasive wear characteristics of 40Mn2 steel in simulated condition of sprocket wheel in crawler bulldozer walking system

Surface Topography: Metrology and Properties
2019-09-06 | Journal article
DOI: 10.1088/2051-672X/ab39b9
Contributors: Hu Sun; Yonghui Zhou; Xiliang Liao; Anhai Li
Source: check_circle
Crossref

Serrated chip formation mechanism analysis for machining of titanium alloy Ti-6Al-4V based on thermal property

The International Journal of Advanced Manufacturing Technology
2018-09-26 | Journal article
DOI: 10.1007/s00170-017-0451-6
Contributors: Jian Zang; Jun Zhao; Anhai Li; Jiming Pang
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Effects of initial particle size distribution and sintering parameters on microstructure and mechanical properties of functionally graded WC-TiC-VC-Cr<inf>3</inf>C<inf>2</inf>-Co hard alloys

Ceramics International
2017 | Journal article
DOI: 10.1016/j.ceramint.2016.11.086
EID:

2-s2.0-85006341325
Contributors: Sun, J.; Zhao, J.; Li, Z.; Ni, X.; Zhou, Y.; Li, A.
Source: Self-asserted source
Anhai Li via Scopus - Elsevier

FEM-simulation of machining induced surface plastic deformation and microstructural texture evolution of Ti-6Al-4V alloy

International Journal of Mechanical Sciences
2017 | Journal article
DOI: 10.1016/j.ijmecsci.2017.02.014
EID:

2-s2.0-85013438933
Contributors: Li, A.; Pang, J.; Zhao, J.; Zang, J.; Wang, F.
Source: Self-asserted source
Anhai Li via Scopus - Elsevier

Prediction of Prone to Failure Area of Mould in Casting Process of Aluminum Alloy Piston

Cailiao Gongcheng/Journal of Materials Engineering
2017 | Journal article
DOI: 10.11868/j.issn.1001-4381.2015.000963
EID:

2-s2.0-85019565849
Contributors: Qin, W.-Z.; Zhao, J.; Li, A.-H.
Source: Self-asserted source
Anhai Li via Scopus - Elsevier

Coated carbide tool failure analysis in high-speed intermittent cutting process based on finite element method

International Journal of Advanced Manufacturing Technology
2016 | Journal article
DOI: 10.1007/s00170-015-7632-y
EID:

2-s2.0-84959220405
Contributors: Wang, F.; Zhao, J.; Li, Z.; Li, A.
Source: Self-asserted source
Anhai Li via Scopus - Elsevier

Design and simulation of thermal residual stresses of coatings on WC-Co cemented carbide cutting tool substrate

Journal of Mechanical Science and Technology
2016 | Journal article
DOI: 10.1007/s12206-016-0430-0
EID:

2-s2.0-84983407492
Contributors: Li, A.; Zhao, J.; Zang, J.; Zheng, W.
Source: Self-asserted source
Anhai Li via Scopus - Elsevier

Microstructural effect on crack propagation behavior of ceramic tool materials via cohesive zone modeling

Materials Science Forum
2016 | Book
DOI: 10.4028/www.scientific.net/MSF.836-837.462
EID:

2-s2.0-84958063409
Contributors: Li, Z.L.; Zhao, J.; Wang, F.Z.; Li, A.H.; Tian, X.H.
Source: Self-asserted source
Anhai Li via Scopus - Elsevier

Modeling and simulation of cutting forces in side milling

Key Engineering Materials
2016 | Book
DOI: 10.4028/www.scientific.net/KEM.693.843
EID:

2-s2.0-84969752540
Contributors: Li, A.; Zhao, J.; Pan, H.; Gong, Z.
Source: Self-asserted source
Anhai Li via Scopus - Elsevier

Tool material selection based on analytic hierarchy process method in machining Al-Si piston alloy

Materials Science Forum
2016 | Book
DOI: 10.4028/www.scientific.net/MSF.836-837.277
EID:

2-s2.0-84958044734
Contributors: Li, A.H.; Wu, Y.M.; Zhao, J.; Gong, Z.C.
Source: Self-asserted source
Anhai Li via Scopus - Elsevier

Optimal selection of cutting tool materials based on multi-criteria decision-making methods in machining Al-Si piston alloy

The International Journal of Advanced Manufacturing Technology
2016-09-05 | Journal article
DOI: 10.1007/s00170-015-8200-1
Contributors: Anhai Li; Jun Zhao; Zhaochao Gong; Fenghua Lin
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Cutting forces and tool failure in high-speed milling of titanium alloy TC21 with coated carbide tools

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
2015 | Journal article
DOI: 10.1177/0954405414526578
EID:

2-s2.0-84937946352
Contributors: Zhang, H.; Zhao, J.; Wang, F.; Zhao, J.; Li, A.
Source: Self-asserted source
Anhai Li via Scopus - Elsevier

Wear mechanism analysis of coated carbide tools in high-speed milling of TI-6Al-4V alloy via cross-section characterization of worn cutting edge

ASME 2015 International Manufacturing Science and Engineering Conference, MSEC 2015
2015 | Conference paper
DOI: 10.1115/MSEC20159335
EID:

2-s2.0-84945421671
Contributors: Li, A.; Zhao, J.; Lin, F.
Source: Self-asserted source
Anhai Li via Scopus - Elsevier

Chip formation in high-speed milling of titanium alloy with PCD tools

Materials Science Forum
2014 | Book
DOI: 10.4028/www.scientific.net/MSF.800-801.150
EID:

2-s2.0-84905856715
Contributors: Li, A.H.; Zhao, J.; Zheng, H.G.; Lu, Y.H.
Source: Self-asserted source
Anhai Li via Scopus - Elsevier
grade
Preferred source (of 2)‎

Cutting forces and surface roughness in high-speed end milling of Ti6Al4V

Key Engineering Materials
2014 | Book
DOI: 10.4028/www.scientific.net/KEM.589-590.76
EID:

2-s2.0-84890098525
Contributors: Wang, F.; Zhao, J.; Li, A.; Zhao, J.
Source: Self-asserted source
Anhai Li via Scopus - Elsevier

Effects of cutting conditions on microhardness and microstructure in high-speed milling of h13 tool steel

International Journal of Advanced Manufacturing Technology
2014 | Journal article
DOI: 10.1007/s00170-014-5812-9
EID:

2-s2.0-84903276284
Contributors: Wang, F.; Zhao, J.; Li, A.; Zhang, H.
Source: Self-asserted source
Anhai Li via Scopus - Elsevier

Experimental study on cutting forces and surface integrity in high-speed side milling of Ti-6Al-4V titanium alloy

Machining Science and Technology
2014 | Journal article
DOI: 10.1080/10910344.2014.926690
EID:

2-s2.0-84905456349
Contributors: Wang, F.; Zhao, J.; Li, A.; Zhao, J.
Source: Self-asserted source
Anhai Li via Scopus - Elsevier

Microstructure-level modeling and simulation of the flexural behavior of ceramic tool materials

Computational Materials Science
2014 | Journal article
DOI: 10.1016/j.commatsci.2013.11.049
EID:

2-s2.0-84890453123
Contributors: Wang, D.; Zhao, J.; Zhao, J.; Li, A.; Chen, X.
Source: Self-asserted source
Anhai Li via Scopus - Elsevier

Performance evaluation of ultra-fine grain carbide in high-speed milling of Ti-6Al-4V

International Journal of Precision Engineering and Manufacturing
2014 | Journal article
DOI: 10.1007/s12541-014-0376-z
EID:

2-s2.0-84898488614
Contributors: Li, A.; Zhao, J.; Gao, X.; Wang, F.
Source: Self-asserted source
Anhai Li via Scopus - Elsevier

Research on the machined surface integrity under combination of various inclination angles in multi-axis ball end milling

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
2014 | Journal article
DOI: 10.1177/0954405413496095
EID:

2-s2.0-84896772647
Contributors: Chen, X.; Zhao, J.; Dong, Y.; Li, A.; Wang, D.
Source: Self-asserted source
Anhai Li via Scopus - Elsevier

Simulation-based solid carbide end mill design and geometry optimization

International Journal of Advanced Manufacturing Technology
2014 | Journal article
DOI: 10.1007/s00170-014-5638-5
EID:

2-s2.0-84899099624
Contributors: Li, A.; Zhao, J.; Pei, Z.; Zhu, N.
Source: Self-asserted source
Anhai Li via Scopus - Elsevier

Three-dimensional finite element modeling of high-speed end milling operations of Ti-6Al-4V

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
2014 | Journal article
DOI: 10.1177/0954405413509375
EID:

2-s2.0-84904166555
Contributors: Wang, F.; Zhao, J.; Li, A.; Zhu, N.; Zhao, J.
Source: Self-asserted source
Anhai Li via Scopus - Elsevier

Microstructure level modelling for properties prediction of WC-Co cemented carbides

Materials Research Innovations
2013 | Journal article
DOI: 10.1179/1432891713Z.000000000311
EID:

2-s2.0-84894413615
Contributors: Wang, D.; Zhao, J.; Li, A.; Cui, X.; Chen, X.
Source: Self-asserted source
Anhai Li via Scopus - Elsevier

Microstructure-level modeling for hardness prediction of WC-Co cemented carbides

Cailiao Gongcheng/Journal of Materials Engineering
2013 | Journal article
DOI: 10.3969/j.issn.1001-4381.2013.09.005
EID:

2-s2.0-84885025378
Contributors: Wang, D.; Zhao, J.; Li, A.-H.; Cui, X.-B.
Source: Self-asserted source
Anhai Li via Scopus - Elsevier

Parametric modeling of microstructure of WC-Co cemented carbides

Cailiao Gongcheng/Journal of Materials Engineering
2013 | Journal article
DOI: 10.3969/j.issn.1001-4381.2013.01.014
EID:

2-s2.0-84874500579
Contributors: Wang, D.; Zhao, J.; Li, A.-H.; Wang, Z.-M.
Source: Self-asserted source
Anhai Li via Scopus - Elsevier

Random distribution model of microstructure and elastic properties prediction of WC-Co cemented carbides

Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment
2013 | Journal article
EID:

2-s2.0-84876428364
Contributors: Wang, D.; Zhao, J.; Li, A.-H.
Source: Self-asserted source
Anhai Li via Scopus - Elsevier

Surface integrity of high-speed face milled Ti-6Al-4V alloy with PCD tools

Machining Science and Technology
2013 | Journal article
DOI: 10.1080/10910344.2013.806180
EID:

2-s2.0-84881346248
Contributors: Li, A.; Zhao, J.; Dong, Y.; Wang, D.; Chen, X.
Source: Self-asserted source
Anhai Li via Scopus - Elsevier

Three-point bending fatigue behavior of WC-Co cemented carbides

Materials and Design
2013 | Journal article
DOI: 10.1016/j.matdes.2012.08.075
EID:

2-s2.0-84867819015
Contributors: Li, A.; Zhao, J.; Wang, D.; Gao, X.; Tang, H.
Source: Self-asserted source
Anhai Li via Scopus - Elsevier

Numerical modelling of high-speed ball end milling with cutter inclination angle

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
2012 | Journal article
DOI: 10.1177/0954405411426235
EID:

2-s2.0-84860245667
Contributors: Chen, X.X.; Zhao, J.; Li, Y.E.; Han, S.G.; Cao, Q.Y.; Li, A.H.
Source: Self-asserted source
Anhai Li via Scopus - Elsevier

Randomness characterization of microstructure of WC-Co cemented carbides

Cailiao Gongcheng/Journal of Materials Engineering
2012 | Journal article
EID:

2-s2.0-84871481334
Contributors: Wang, D.; Zhao, J.; Li, A.-H.
Source: Self-asserted source
Anhai Li via Scopus - Elsevier

Wear mechanisms of coated carbide tools in high-speed dry milling of titanium alloy

Mocaxue Xuebao/Tribology
2012 | Journal article
EID:

2-s2.0-84863077800
Contributors: Li, A.-H.; Zhao, J.; Luo, H.-B.; Pei, Z.-Q.
Source: Self-asserted source
Anhai Li via Scopus - Elsevier

Fabrication and characterization of Sialon-Si3N4 graded nano-composite ceramic tool materials

Composites Part B: Engineering
2011 | Journal article
DOI: 10.1016/j.compositesb.2011.07.007
EID:

2-s2.0-80051781042
Contributors: Zheng, G.M.; Zhao, J.; Zhou, Y.H.; Gao, Z.J.; Cui, X.B.; Li, A.H.
Source: Self-asserted source
Anhai Li via Scopus - Elsevier
Items per page:
Page 1 of 2

Peer review (49 reviews for 11 publications/grants)

Review activity for Advanced composites letters. (1)
Review activity for International journal, advanced manufacturing technology. (11)
Review activity for Journal of manufacturing and materials processing. (1)
Review activity for Journal of Materials Research and Technology. (1)
Review activity for Journal of mechanical science and technology. (1)
Review activity for Journal of mechanical science and technology. (7)
Review activity for Lubricants. (1)
Review activity for Materials today communications. (1)
Review activity for Proceedings of the Institution of Mechanical Engineers. (1)
Review activity for Proceedings of the Institution of Mechanical Engineers. (6)
Review activity for The international journal of advanced manufacturing technology. (18)
How many people are using ORCID?