Personal information

Activities

Education and qualifications (1)

AGH University of Science and Technology: Krakow, PL

2003-10-01 to present | Ph.D., D.Sc., Eng. (DEPARTMENT OF THERMAL AND FLUID FLOW MACHINES)
Education
Source: Self-asserted source
Andrzej Gołdasz

Works (23)

The Impact of Tube Arrangement in Latent Heat Thermal Energy Storage on the Melting Rate of Phase Change Material

Advances in Science and Technology Research Journal
2024-12-01 | Journal article
Contributors: Artur Szajding; Andrzej Gołdasz; Łukasz Łach; Pavel Eichler
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Technical Analysis of the Possibility of Burning Hydrogen in Furnaces of the Metallurgical Sector

Energies
2024-09-23 | Journal article
Contributors: Andrzej Gołdasz; Karol Sztekler; Łukasz Mika
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

The Effect of Nozzle Configuration on Adsorption-Chiller Performance

Energies
2024-03-01 | Journal article
Contributors: Wojciech Kalawa; Karol Sztekler; Jakub Kozaczuk; Łukasz Mika; Ewelina Radomska; Wojciech Nowak; Andrzej Gołdasz
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Nowy sposób odzyskiwania ciepła z procesu sprężania powietrza

Ciepłownictwo Ogrzewnictwo Wentylacja
2023 | Journal article | Author
Part of ISSN: 0137-3676
OTHER-ID:

BPP_AGH/publ_id/145081

Contributors: Andrzej Gołdasz; Artur Szajding; Karol Sztekler; Lesław Wereszczyński; Augustyn Wójcik
Source: check_circle
BPP_AGH

Inverse solution to the vertical plate cooling by radiation and convection in air

Archives of Metallurgy and Materials
2022 | Journal article | Author
WOSUID:

WOS:000849199100005

Part of ISSN: 1733-3490
OTHER-ID:

BPP_AGH/publ_id/140250

Contributors: Zbigniew Malinowski; Andrzej Gołdasz; Beata Hadała; Agnieszka Cebo-Rudnicka
Source: check_circle
BPP_AGH
grade
Preferred source (of 2)‎

Technical, economic, and environmental analyses of the modernization of a chamber furnace operating on natural gas or hydrogen

International Journal of Hydrogen Energy
2022 | Journal article | Author
WOSUID:

WOS:000788057700002

Part of ISSN: 0360-3199
OTHER-ID:

BPP_AGH/publ_id/139644

Contributors: Andrzej Gołdasz; Dominika Matuszewska; Piotr Olczak
Source: check_circle
BPP_AGH

Analiza pracy cieplnej pieca grzewczego o pracy ciągłej

Hutnik Wiadomości Hutnicze : czasopismo naukowo-techniczne poświęcone zagadnieniom hutnictwa
2020 | Journal article | Author
Part of ISSN: 1230-3534
OTHER-ID:

BPP_AGH/publ_id/130749

Contributors: Andrzej Gołdasz; Marcin Rywotycki; Artur Szajding
Source: check_circle
BPP_AGH

The influence of coolant velocity on the local heat transfer coefficient during steel quenching

Computer Methods in Material Science
2020 | Journal article
Contributors: Artur Szajding; Andrzej Gołdasz; Tadeusz Telejko
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Thermomechanical analysis of the charge heating in a rotary furnace

Archives of Metallurgy and Materials
2019 | Journal article
EID:

2-s2.0-85075637816

Contributors: Goldasz, A.; Malinowski, Z.; Cebo-Rudnicka, A.
Source: Self-asserted source
Andrzej Gołdasz via Scopus - Elsevier
grade
Preferred source (of 3)‎

Identification of the Heat Transfer Coefficient at the Charge Surface Heated on the Chamber Furnace

Archives of Metallurgy and Materials
2017 | Journal article
EID:

2-s2.0-85026759914

Contributors: Gołdasz, A.; Malinowski, Z.
Source: Self-asserted source
Andrzej Gołdasz via Scopus - Elsevier
grade
Preferred source (of 2)‎

Identyfikacja warunków brzegowych wymiany ciepła w komorach pieców grzewczych

2017 | Book | Author
Part of ISSN: 0867-6631
OTHER-ID:

BPP_AGH/publ_id/106631

Contributors: Andrzej Gołdasz
Source: check_circle
BPP_AGH

Heat Flux Identification at the Charge Surface during Heating in Chamber Furnace

Archives of Metallurgy and Materials
2016 | Journal article
EID:

2-s2.0-85010304622

Contributors: Gołdasz, A.; Malinowski, Z.
Source: Self-asserted source
Andrzej Gołdasz via Scopus - Elsevier

Comparison of four models of radiative heat transfer between flat surface to evaluate the temperature field based on example of the continuous casting mould

Archives of Metallurgy and Materials
2015 | Journal article
EID:

2-s2.0-84929469148

Contributors: Rywotycki, M.; Malinowski, Z.; Miłkowska-Piszczek, K.; Gołdasz, A.; Hadała, B.
Source: Self-asserted source
Andrzej Gołdasz via Scopus - Elsevier

Influence of the radiation shield on the temperature of rails rolled in the reversing mill

Archives of Metallurgy and Materials
2015 | Journal article
EID:

2-s2.0-84929459968

Contributors: Gołdasz, A.; Malinowski, Z.; Hadała, B.; Rywotycki, M.
Source: Self-asserted source
Andrzej Gołdasz via Scopus - Elsevier

The development of heating curves for open die forging of heavy parts

Archives of Metallurgy and Materials
2015 | Journal article
EID:

2-s2.0-84949468975

Contributors: Gołdasz, A.; Malinowski, Z.; Telejko, T.; Buczek, A.; Rywotycki, M.; Martynowski, R.; Kowalski, D.
Source: Self-asserted source
Andrzej Gołdasz via Scopus - Elsevier

The influence of burner locations in the heating furnace on the charge temperature field

Archives of Metallurgy and Materials
2015 | Journal article
EID:

2-s2.0-84949444752

Contributors: Rywotycki, M.; Szajding, A.; Malinowski, Z.; Telejko, T.; Gołdasz, A.; Beneš, M.
Source: Self-asserted source
Andrzej Gołdasz via Scopus - Elsevier

Modelling liquid steel motion caused by electromagnetic stirring in continuous casting steel process

Archives of Metallurgy and Materials
2014 | Journal article
EID:

2-s2.0-84942077813

Contributors: Rywotycki, M.; Malinowski, Z.; Giełzecki, J.; Gołdasz, A.
Source: Self-asserted source
Andrzej Gołdasz via Scopus - Elsevier

Experimental and numerical determination of heat transfer coefficient between oil and outer surface of monometallic tubes finned on both sides with twisted internal longitudinal fins

International Journal of Heat and Mass Transfer
2013 | Journal article
EID:

2-s2.0-84870811249

Contributors: Szajding, A.; Telejko, T.; Straka, R.; Gołdasz, A.
Source: Self-asserted source
Andrzej Gołdasz via Scopus - Elsevier

The influence of radiation model on the distribution of heat flux in the pusher furnace

Archives of Metallurgy and Materials
2012 | Journal article
EID:

2-s2.0-84874027116

Contributors: Gołdasz, A.; Malinowski, Z.; Telejko, T.; Rywotycki, M.; Szajding, A.
Source: Self-asserted source
Andrzej Gołdasz via Scopus - Elsevier

The influence of thermal stresses and strand bending on surface defects formation in continuously cast strands

Archives of Metallurgy and Materials
2011 | Journal article
EID:

2-s2.0-80051996201

Contributors: Hadała, B.; Cebo-Rudnicka, A.; Malinowski, Z.; Gołdasz, A.
Source: Self-asserted source
Andrzej Gołdasz via Scopus - Elsevier

Comparison of the temperature field prediction by 2D and 3D finite element models in the continuous casting process

METAL 2010 - 19th International Conference on Metallurgy and Materials, Conference Proceedings
2010 | Conference paper
EID:

2-s2.0-84923918258

Contributors: Malinowski, Z.; Hadała, B.; Cebo-rudnicka, A.; Gołdasz, A.
Source: Self-asserted source
Andrzej Gołdasz via Scopus - Elsevier

The selected crack criterions sensitivity to the ARC changing of the continous casting machine

METAL 2010 - 19th International Conference on Metallurgy and Materials, Conference Proceedings
2010 | Conference paper
EID:

2-s2.0-84923853661

Contributors: Cebo-Rudnicka, A.; Malinowski, Z.; Gołdasz, A.; Hadała, B.
Source: Self-asserted source
Andrzej Gołdasz via Scopus - Elsevier

Study of heat balance in the rolling process of bars

Archives of Metallurgy and Materials
2009 | Journal article
EID:

2-s2.0-72949086152

Contributors: Gołdasz, A.; Malinowski, Z.; Hadala, B.
Source: Self-asserted source
Andrzej Gołdasz via Scopus - Elsevier

Peer review (2 reviews for 2 publications/grants)

Review activity for Applied sciences. (1)
Review activity for Energies. (1)