Personal information

Verified email domains

Activities

Works (42)

Innovative device for crack monitoring and deflection analysis in structures: Improved accuracy, safety and efficiency

Results in Engineering
2024-12 | Journal article
Part of ISSN: 2590-1230
Contributors: Alfonso Carlos Marcos Romero; Laura Mendoza-Cerezo; Antonio Macías-García; Noelia Rebollo Muñoz; Jesús Manuel Rodríguez Rego
Source: Self-asserted source
Alfonso Carlos Marcos Romero

Optimising Bioprinting Nozzles through Computational Modelling and Design of Experiments

Biomimetics
2024-07-29 | Journal article
Contributors: Juan C. Gómez Blanco; Antonio Macías-García; Jesús M. Rodríguez-Rego; Laura Mendoza-Cerezo; Francisco M. Sánchez-Margallo; Alfonso C. Marcos-Romero; José B. Pagador-Carrasco
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Three-Dimensional Bioprinting of GelMA Hydrogels with Culture Medium: Balancing Printability, Rheology and Cell Viability for Tissue Regeneration

Polymers
2024-05-19 | Journal article
Contributors: Laura Mendoza-Cerezo; Jesús M. Rodríguez-Rego; Antonio Macías-García; Antuca Callejas-Marín; Luís Sánchez-Guardado; Alfonso C. Marcos-Romero
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Odour characterisation of high-density polyethylene recycled with sepiolite by sensory evaluation

Polymers and Polymer Composites
2024-01 | Journal article
Contributors: María Dolores Samper Madrigal; Jesús M Rodríguez-Rego; Laura Mendoza-Cerezo; Alfonso C Marcos-Romero; Cristina Pavón
Source: check_circle
Crossref

Combination of Review and Design of Experiments to Optimize Computational Simulations on Bioprinting Nozzles

2024-01-08 | Preprint
Contributors: J. Carlos Gómez-Blanco; Antonio Macías-García; Jesús Manuel Rodríguez Rego; Laura Mendoza Cerezo; Francisco M. Sanchez-Margallo; Alfonso Carlos Marcos Romero; J. Blas Pagador
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Computational simulation-based comparative analysis of standard 3D printing and conical nozzles for pneumatic and piston-driven bioprinting

International Journal of Bioprinting
2023 | Journal article
Contributors: Gomez-Blanco, Juan Carlos; Pagador, J. Blas; Galvan-Chacon, Victor P.; Sanchez-Peralta, Luisa F.; Matamoros, Manuel; Marcos, Alfonso; Sanchez-Margallo, Francisco M.
Source: check_circle
Web of Science Researcher Profile Sync

Evolution of bioprinting and current applications

International Journal of Bioprinting
2023 | Journal article
Contributors: Mendoza-Cerezo, Laura; Rodriguez-Rego, Jesus M.; Macias-Garcia, Antonio; Marcos-Romero, Alfonso C.; Diaz-Parralejo, Antonio
Source: check_circle
Web of Science Researcher Profile Sync

Guide for the development and evaluation of supercapacitors with the proposal of a novel design to improve their performance

Journal of Energy Storage
2023 | Journal article
Contributors: Rodriguez-Rego, Jesus M.; Carrasco-Amador, Juan Pablo; Mendoza-Cerezo, Laura; Marcos-Romero, Alfonso C.; Macias-Garcia, Antonio
Source: check_circle
Web of Science Researcher Profile Sync

RELATIONSHIP BETWEEN RHEOLOGICAL PROPERTIES OF HYDROGELS, BIOPRINTING PARAMETERS AND 3D SCANNER TECHNOLOGY

British Journal of Surgery
2023 | Journal article
Contributors: Rego, J. M. Rodriguez; Cerezo, L. Mendoza; Garcia, A. Macias; Amador, J. PCarrasco; Romero, A. C. Marcos; Parralejo, A. Diaz
Source: check_circle
Web of Science Researcher Profile Sync

RHEOLOGICAL CHARACTERISATION OF DIFFERENT ALGINATE-BASED HYDROGELS FOR A BIOMIMETIC REPRESENTATION OF A TOOTH

British Journal of Surgery
2023 | Journal article
Contributors: Cerezo, L. Mendoza; Rego, J. M. Rodriguez; Garcia, A. Macias; Amador, J. P. Carrasco; Romero, A. C. Marcos; Parralejo, A. Diaz
Source: check_circle
Web of Science Researcher Profile Sync

Study of the influence of the type of pores present in the electrodes on the behaviour of a SWAGELOK-type supercapacitor

Journal of Energy Storage
2023-09 | Journal article
Part of ISSN: 2352-152X
Contributors: Jesús M. Rodríguez-Rego; Laura Mendoza-Cerezo; Alfonso C. Marcos-Romero; Juan P. Carrasco-Amador; A. Macías-García
Source: Self-asserted source
Alfonso Carlos Marcos Romero

Fabrication and characterisation of bioglass and hydroxyapatite-filled scaffolds

Journal of the Mechanical Behavior of Biomedical Materials
2023-08 | Journal article
Contributors: Laura Mendoza-Cerezo; Jesús M. Rodríguez-Rego; Anabel Soriano-Carrera; Alfonso C. Marcos-Romero; Antonio Macías-García
Source: check_circle
Crossref

Analysis of the Use of Hydrogels in Bioprinting

3D Printing
2023-02-28 | Book chapter
Part of ISBN: 9781003296676
Contributors: Jesús M. Rodríguez Rego; Laura Mendoza Cerezo; Antonio Macías García; Alfonso C. Marcos Romero
Source: Self-asserted source
Alfonso Carlos Marcos Romero

Comparison of the potential for bioprinting of different 3D printing technologies

International Journal of Bioprinting
2023-02-03 | Journal article
Part of ISSN: 2424-8002
Part of ISSN: 2424-7723
Contributors: Jesús Manuel Rodríguez Rego; Laura Mendoza-Cerezo; Antonio Macías-García; Alfonso C. Marcos-Romero; Juan P. Carrasco-Amador
Source: Self-asserted source
Alfonso Carlos Marcos Romero
grade
Preferred source (of 2)‎

Methodology for characterizing the printability of hydrogels

International Journal of Bioprinting
2023-01-10 | Journal article
Part of ISSN: 2424-8002
Part of ISSN: 2424-7723
Contributors: Jesús M. Rodríguez-Rego; Laura Mendoza-Cerezo; Antonio Macías-García; Juan P. Carrasco-Amador; Alfonso Carlos Marcos Romero
Source: Self-asserted source
Alfonso Carlos Marcos Romero
grade
Preferred source (of 2)‎

REVIEW OF MEDIUM TEMPERATURE SOLAR CONCENTRATION TECHNOLOGY FOR INDUSTRIAL APPLICATIONS,REVISIÓN DE LA TECNOLOGÍA DE CONCENTRACIÓN SOLAR DE MEDIA TEMPERATURA PARA APLICACIONES INDUSTRIALES

Proceedings from the International Congress on Project Management and Engineering
2021 | Conference paper
EID:

2-s2.0-85127611222

Part of ISSN: 26955067
Contributors: Matamoros Pacheco, M.; Canito Lobo, J.L.; Carrasco Amador, J.P.; Marcos Romero, A.C.
Source: Self-asserted source
Alfonso Carlos Marcos Romero via Scopus - Elsevier

STUDY OF HEAT DISTRIBUTION IN THE VOLUME OF A CLIMATIC CHAMBER FOR APPLICATION IN BIOPRINTING TECHNIQUES,ESTUDIO DE LA DISTRIBUCIÓN DE CALOR EN EL VOLUMEN DE UNA CÁMARA CLIMÁTICA PARA APLICACIÓN DE TÉCNICAS DE BIOIMPRESIÓN

Proceedings from the International Congress on Project Management and Engineering
2021 | Conference paper
EID:

2-s2.0-85127571300

Part of ISSN: 26955067
Contributors: Matamoros Pacheco, M.; Marcos Romero, A.C.; Agujetas Ortiz, R.; Carrasco Amador, J.P.; Gómez Blanco, J.C.
Source: Self-asserted source
Alfonso Carlos Marcos Romero via Scopus - Elsevier

Improving Cell Viability and Velocity in μ-Extrusion Bioprinting with a Novel Pre-Incubator Bioprinter and a Standard FDM 3D Printing Nozzle

Materials
2021-06 | Journal article | Author
Contributors: J.C. Gómez-Blanco; Víctor Pablo Galván Chacón; David Patrocinio; Manuel Matamoros Pacheco; Álvaro J. Sánchez-Ortega; Alfonso Carlos Marcos Romero; María Duarte-León; Federica Marinaro; J. Blas Pagador; Francisco Miguel Sanchez Margallo
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 3)‎

Temperature and Humidity PID Controller for a Bioprinter Atmospheric Enclosure System

Micromachines
2020-11-12 | Journal article
Contributors: Manuel Matamoros; J. Carlos Gómez-Blanco; Álvaro J. Sánchez; Enrique Mancha; Alfonso C. Marcos; J. Pablo Carrasco-Amador; J. Blas Pagador
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Bioink Temperature Influence on Shear Stress, Pressure and Velocity Using Computational Simulation

Processes
2020-07-17 | Journal article
Part of ISSN: 2227-9717
Contributors: J.C. Gómez-Blanco; Enrique Mancha-Sánchez; Alfonso C. Marcos; Manuel Matamoros; Antonio Díaz-Parralejo; J. Blas Pagador
Source: Self-asserted source
Alfonso Carlos Marcos Romero
grade
Preferred source (of 3)‎

Influence of air velocity on indoor environment quality in unidirectional flow operating theatres: A study based on Computational Fluid Dynamics

E3S Web of Conferences
2019 | Conference paper
EID:

2-s2.0-85062423078

Part of ISSN: 22671242
Contributors: Sánchez-Barroso Moreno, G.; García Sanz-Calcedo, J.; Marcos Romero, A.C.
Source: Self-asserted source
Alfonso Carlos Marcos Romero via Scopus - Elsevier
grade
Preferred source (of 2)‎

Influence of an iris-fixed phakic intraocular lens on the transport of nutrients by the aqueous humor

Biomechanics and Modeling in Mechanobiology
2019-04 | Journal article
Part of ISSN: 1617-7959
Part of ISSN: 1617-7940
Source: Self-asserted source
Alfonso Carlos Marcos Romero
grade
Preferred source (of 2)‎

Computational simulation of aqueous humour dynamics in the presence of a posterior-chamber versus iris-fixed phakic intraocular lens

Plos One
2018 | Journal article
WOSUID:

WOS:000441452200032

Contributors: Fernandez-Vigo, J. I.; Marcos, A. C.; Agujetas, R.; Montanero, J. M.; Sanchez-Guillen, I.; Garcia-Feijoo, J.; Pandal-Blanco, A.; Fernandez-Vigo, J. A.; Macarro-Merino, A.
Source: Self-asserted source
Alfonso Carlos Marcos Romero via ResearcherID
grade
Preferred source (of 2)‎

Simulation of the human airways using virtual topology tools and meshing optimization

Biomechanics and Modeling in Mechanobiology
2018 | Journal article
WOSUID:

WOS:000427170900011

Contributors: Fernandez-Tena, A.; Marcos, A. C.; Agujetas, R.; Ferrera, C.
Source: Self-asserted source
Alfonso Carlos Marcos Romero via ResearcherID
grade
Preferred source (of 2)‎

A new adaptive time step method for unsteady flow simulations in a human lung

Computer Methods in Biomechanics and Biomedical Engineering
2017 | Journal article
WOSUID:

WOS:000400681800011

Contributors: Fenandez-Tena, A.; Marcos, A. C.; Martinez, C.; Walters, D. K.
Source: Self-asserted source
Alfonso Carlos Marcos Romero via ResearcherID
grade
Preferred source (of 2)‎

Numerical and experimental analysis of the transitional flow across a real stenosis

Biomechanics and Modeling in Mechanobiology
2017 | Journal article
WOSUID:

WOS:000405489600023

Contributors: Agujetas, R.; Ferrera, C.; Marcos, A. C.; Alejo, J. P.; Montanero, J. M.
Source: Self-asserted source
Alfonso Carlos Marcos Romero via ResearcherID
grade
Preferred source (of 2)‎

Treatment of Slaughterhouse Waste Water Mixed with Serum from Lacteal Industry of Extremadura in Spain to Produce Clean Energy

Energies
2017 | Journal article
WOSUID:

WOS:000404384000031

Contributors: Marcos, A. C.; Al-Kassir, A.; Cuadros, Francisco; Yusaf, Talal
Source: Self-asserted source
Alfonso Carlos Marcos Romero via ResearcherID
grade
Preferred source (of 3)‎

Experimental study of drying of agricultural solid biomass residues using hot combustion gases of a pellet stove

Journal of Biotechnology
2016 | Journal article
WOSUID:

WOS:000380240300084

Contributors: Al-kassir, Awf; Lopez Rodriguez, F.; Marcos, A. C.; Coelho, P. J.
Source: Self-asserted source
Alfonso Carlos Marcos Romero via ResearcherID

The cooperative learning: Understanding and increasing the knowledge of the facilities design without a professor extra effort

Multidisciplinary Journal for Education, Social and Technological Sciences
2014-09-11 | Journal article
Part of ISSN: 2341-2593
Contributors: C. Ferrera; J. Fernández; A.C. Marcos
Source: Self-asserted source
Alfonso Carlos Marcos Romero

Characterization of particle deposition in a lung model using an individual path

Efm12 - Experimental Fluid Mechanics 2012
2013 | Book chapter
WOSUID:

WOS:000319932200079

Contributors: Tena, A. F.; Casan, P.; Fernandez, J.; Ferrera, C.; Marcos, A.
Source: Self-asserted source
Alfonso Carlos Marcos Romero via ResearcherID
grade
Preferred source (of 2)‎

A methodology for geometry generation of the lower conductive zone of the lung airways and simulation by intermediate boundary conditions

American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM
2012 | Conference paper
EID:

2-s2.0-84882407468

Part of ISSN: 08888116
Contributors: Tena, A.F.; Casan, P.; Barrio, R.; Marcos, A.; Parrondo, J.
Source: Self-asserted source
Alfonso Carlos Marcos Romero via Scopus - Elsevier

An experimental setup for the study of the steady air flow in a diesel engine chamber

EPJ Web of Conferences
2012 | Conference paper
EID:

2-s2.0-84883061604

Part of ISSN: 21016275 2100014X
Contributors: Fernández, J.; Vega, E.J.; Castilla, A.; Marcos, A.; Montanero, J.M.; Barrio, R.
Source: Self-asserted source
Alfonso Carlos Marcos Romero via Scopus - Elsevier

Environmental treatment of slaughterhouse wastes in a continuously stirred anaerobic reactor: Effect of flow rate variation on biogas production

Fuel Processing Technology
2012 | Journal article
EID:

2-s2.0-84864033928

Part of ISSN: 03783820
Contributors: Marcos, A.; Al-Kassir, A.; López, F.; Cuadros, F.; Brito, P.
Source: Self-asserted source
Alfonso Carlos Marcos Romero via Scopus - Elsevier

Experimental and numerical investigation of the flow in a micropump model

American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM
2012 | Conference paper
EID:

2-s2.0-84882407533

Part of ISSN: 08888116
Contributors: Fernández, J.; Marcos, A.; Montanero, J.M.; Barrio, R.; Parrondo, J.L.
Source: Self-asserted source
Alfonso Carlos Marcos Romero via Scopus - Elsevier

Temperature effect on performance of a laboratory scale plant for anaerobic digestion of meat industry wastes to produce methane

Journal of Biotechnology
2012 | Journal article
WOSUID:

WOS:000318064700174

Contributors: Marcos, A.; Al-Kassir, A.; Cuadros, F.; Lopez-Rodriguez, F.; Marcos, A. C.
Source: Self-asserted source
Alfonso Carlos Marcos Romero via ResearcherID

Performance characteristics and internal flow patterns in a reverse-running pump–turbine

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
2012-03 | Journal article
Part of ISSN: 0954-4062
Part of ISSN: 2041-2983
Contributors: R Barrio; J Fernández; E Blanco; J Parrondo; A Marcos
Source: Self-asserted source
Alfonso Carlos Marcos Romero
grade
Preferred source (of 2)‎

Numerical flow simulation in a reciprocating valveless micropump with parallel geometry nozzle-diffuser

ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011
2011 | Conference paper
EID:

2-s2.0-84881396411

Contributors: Fernández, J.; Marcos, A.; Barrio, R.; Blanco, E.; Parrondo, J.L.
Source: Self-asserted source
Alfonso Carlos Marcos Romero via Scopus - Elsevier

Numerical simulation of the generation of fluid-dynamic perturbations in a centrifugal pump due to rotor-volute-circuit interaction

9th European Conference on Turbomachinery: Fluid Dynamics and Thermodynamics, ETC 2011 - Conference Proceedings
2011 | Conference paper
EID:

2-s2.0-84881455005

Part of ISSN: 24104833
Contributors: Blanco, E.; Barrio, R.; Fernández, J.; Parrondo, J.; Marcos, A.
Source: Self-asserted source
Alfonso Carlos Marcos Romero via Scopus - Elsevier

Studies of the flow of air in a mixed-flow pump using numerical simulations

Proceedings of the Institution of Mechanical Engineers Part a-Journal of Power and Energy
2011 | Journal article
WOSUID:

WOS:000293999700009

Contributors: Fernandez, J.; Marcos, A.; Barrio, R.; Blanco, E.; Parrondo, J.
Source: Self-asserted source
Alfonso Carlos Marcos Romero via ResearcherID
grade
Preferred source (of 2)‎

AIR FLOW SIMULATION IN A DIESEL ENGINE

Proceedings of the Asme Fluids Engineering Division Summer Conference - 2010 - Vol 1, Pts a-C
2010 | Book
WOSUID:

WOS:000307365700037

Contributors: Fernandez, Joaquin; Marcos, Alfonso; Barrio, Raul; Blanco, Eduardo; Castilla, Alejandro; Asme,
Source: Self-asserted source
Alfonso Carlos Marcos Romero via ResearcherID
grade
Preferred source (of 3)‎

Numerical investigation of a centrifugal pump running in reverse mode

Proceedings of the Institution of Mechanical Engineers Part a-Journal of Power and Energy
2010 | Journal article
WOSUID:

WOS:000278998700008

Contributors: Fernandez, J.; Barrio, R.; Blanco, E.; Parrondo, J. L.; Marcos, A.
Source: Self-asserted source
Alfonso Carlos Marcos Romero via ResearcherID
grade
Preferred source (of 2)‎

EXPERIMENTAL AND NUMERICAL INVESTIGATION OF A CENTRIFUGAL PUMP WORKING AS A TURBINE

Proceedings of the Asme Fluids Engineering Division Summer Conference, Vol 1, Pts a-C
2009 | Book
WOSUID:

WOS:000280424200050

Contributors: Fernandez, Joaquin; Barrio, Raul; Blanco, Eduardo; Parrondo, Jorge; Marcos, Alfonso; Asme,
Source: Self-asserted source
Alfonso Carlos Marcos Romero via ResearcherID
grade
Preferred source (of 3)‎

Peer review (6 reviews for 3 publications/grants)

Review activity for Advanced engineering materials (3)
Review activity for International Journal of bioprinting. (2)
Review activity for Resources, conservation and recycling. (1)