Personal information

Activities

Employment (1)

INSA Hauts-de-France: Valenciennes, FR

Teacher-Researcher (Mechanical)
Employment
Source: Self-asserted source
Jean-Dominique GUERIN

Works (34)

An experimental investigation into influences of build orientation and specimen thickness on quasi-static and dynamic mechanical responses of Selective Laser Melting 316L Stainless Steel

Materials Science and Engineering: A
2022-02 | Journal article
Part of ISSN: 0921-5093
Contributors: H. Carassus; J.D. Guérin; Hervé Morvan; G. Haugou; Tarik Sadat; S. Guérard; E. Markiewicz
Source: Self-asserted source
Jean-Dominique GUERIN

On the effects of build orientation, strain rate sensitivity and sample thickness on the mechanical behavior of 316l Stainless Steel manufactured by Selective Laser Melting

EPJ Web of Conferences
2021 | Journal article
Part of ISSN: 2100-014X
Contributors: Hugo Carassus; Hervé Morvan; Gregory Haugou; Jean-Dominique Guerin; Tarik Sadat; Sandra Guerard; Eric Markiewicz
Source: Self-asserted source
Jean-Dominique GUERIN

Comparison of different sensor technologies to monitor a forging process

ESAFORM 2021
2021-04-14 | Journal article
Contributors: Camille Durand; Ludovic Freund; Cyrille Baudouin; Régis Bigot; Jean-Dominique Guérin
Source: Self-asserted source
Jean-Dominique GUERIN

Effect of initial grain size on the mechanical behaviour of austenite during deformation under hot-working conditions

Materials Science and Engineering: A
2021-01 | Journal article
Part of ISSN: 0921-5093
Contributors: Eli Saúl Puchi-Cabrera; Jean-Dominique Guérin; José Gregorio La Barbera-Sosa; Mirentxu Dubar; Laurent Dubar
Source: Self-asserted source
Jean-Dominique GUERIN

Friction Correction of Austenite Flow Stress Curves Determined under Axisymmetric Compression Conditions

Experimental Mechanics
2020 | Journal article
EID:

2-s2.0-85062797551

Part of ISBN:

17412765 00144851

Contributors: Puchi-Cabrera, E.S.; Guérin, J.-D.; La Barbera-Sosa, J.G.; Álvarez-Hostos, J.C.; Moreau, P.; Dubar, M.; Dubar, L.
Source: Self-asserted source
Jean-Dominique GUERIN via Scopus - Elsevier

Physically-based constitutive description of a commercial Al-Mg-Si alloy deformed under cold-warm working conditions

Journal of Alloys and Compounds
2019 | Journal article
EID:

2-s2.0-85063733729

Part of ISBN:

09258388

Contributors: Le Mercier, K.; Guérin, J.D.; Dubar, M.; Dubar, L.; Puchi-Cabrera, E.S.
Source: Self-asserted source
Jean-Dominique GUERIN via Scopus - Elsevier

Modeling the viscoplastic flow behavior of a 20MnCr5 steel grade deformed under hot-working conditions, employing a meshless technique

International Journal of Plasticity
2018 | Journal article
EID:

2-s2.0-85041125486

Part of ISBN:

07496419

Contributors: Álvarez Hostos, J.C.; Bencomo, A.D.; Puchi Cabrera, E.S.; Guérin, J.-D.; Dubar, L.
Source: Self-asserted source
Jean-Dominique GUERIN via Scopus - Elsevier

Plausible extension of Anand's model to metals exhibiting dynamic recrystallization and its experimental validation

International Journal of Plasticity
2018 | Journal article
EID:

2-s2.0-85046897225

Part of ISBN:

07496419

Contributors: Puchi-Cabrera, E.S.; Guérin, J.D.; La Barbera-Sosa, J.G.; Dubar, M.; Dubar, L.
Source: Self-asserted source
Jean-Dominique GUERIN via Scopus - Elsevier

Dynamic recrystallization behaviour of spheroidal graphite iron. Application to cutting operations

Journal of Materials Processing Technology
2017 | Journal article
EID:

2-s2.0-84985032100

Part of ISBN:

09240136

Contributors: Le Mercier, K.; Watremez, M.; Puchi-Cabrera, E.S.; Dubar, L.; Guérin, J.D.; Fouilland-Paillé, L.
Source: Self-asserted source
Jean-Dominique GUERIN via Scopus - Elsevier

Hot ductility and flow stress of AISI 4130 and 52100-type steels

Materials Science and Engineering A
2017 | Journal article
EID:

2-s2.0-85014090352

Part of ISBN:

09215093

Contributors: Barbier, D.; Guérin, J.-D.; Dubar, M.; Bénard, T.; Bonneau, S.; Cabrera, E.S.P.
Source: Self-asserted source
Jean-Dominique GUERIN via Scopus - Elsevier

Incremental constitutive description of SAE 5120 steel deformed under hot-working conditions

International Journal of Mechanical Sciences
2017 | Journal article
EID:

2-s2.0-85029678713

Part of ISBN:

00207403

Contributors: Puchi-Cabrera, E.S.; Guérin, J.D.; La Barbera-Sosa, J.G.; Dubar, M.; Dubar, L.
Source: Self-asserted source
Jean-Dominique GUERIN via Scopus - Elsevier

A novel approach for modeling the flow stress curves of austenite under transient deformation conditions

Materials Science and Engineering A
2016 | Journal article
EID:

2-s2.0-84997795568

Part of ISBN:

09215093

Contributors: Puchi-Cabrera, E.S.; Guérin, J.D.; Dubar, M.; Dubar, L.; Dubois, A.
Source: Self-asserted source
Jean-Dominique GUERIN via Scopus - Elsevier

Characterization of the hot-working behavior of a Cu-Ni-Si alloy

Materials Science and Engineering A
2016 | Journal article
EID:

2-s2.0-84964807524

Part of ISBN:

09215093

Contributors: Chalon, J.; Guérin, J.D.; Dubar, L.; Dubois, A.; Puchi-Cabrera, E.S.
Source: Self-asserted source
Jean-Dominique GUERIN via Scopus - Elsevier

Constitutive description of Fe-Mn23-C0.6 steel deformed under hot-working conditions

International Journal of Mechanical Sciences
2015 | Journal article
EID:

2-s2.0-84931268224

Part of ISBN:

00207403

Contributors: Puchi-Cabrera, E.S.; Guérin, J.D.; Dubar, M.; Staia, M.H.; Lesage, J.; Chicot, D.
Source: Self-asserted source
Jean-Dominique GUERIN via Scopus - Elsevier

Constitutive description for the design of hot-working operations of a 20MnCr5 steel grade

Materials and Design
2014 | Journal article
EID:

2-s2.0-84902171450

Part of ISBN:

18734197 02641275

Contributors: Puchi-Cabrera, E.S.; Guérin, J.-D.; Dubar, M.; Staia, M.H.; Lesage, J.; Chicot, D.
Source: Self-asserted source
Jean-Dominique GUERIN via Scopus - Elsevier

Lighter tableware ceramic by controlling porosity: Effect of porosity on mechanical properties

Ceramics International
2014 | Journal article
EID:

2-s2.0-84887624535

Part of ISBN:

02728842

Contributors: Verhaeghe, B.; Courtois, C.; Petit, F.; Cambier, F.; Guérin, J.-D.; Leriche, A.; Hampshire, S.
Source: Self-asserted source
Jean-Dominique GUERIN via Scopus - Elsevier

Thermo-mechanical behaviour of spheroidal graphite iron

Key Engineering Materials
2014 | Book
EID:

2-s2.0-84902590245

Part of ISBN:

10139826

Contributors: Le Mercier, K.; Watremez, M.; Fouilland, L.; Guérin, J.D.; Dubar, L.
Source: Self-asserted source
Jean-Dominique GUERIN via Scopus - Elsevier

An experimental analysis and modeling of the work-softening transient due to dynamic recrystallization

International Journal of Plasticity
2014-03 | Journal article
Part of ISSN: 0749-6419
Contributors: E.S. Puchi-Cabrera; M.H. Staia; J.D. Guérin; J. Lesage; M. Dubar; D. Chicot
Source: Self-asserted source
Jean-Dominique GUERIN
grade
Preferred source (of 2)‎

Analysis of the work-hardening behavior of C-Mn steels deformed under hot-working conditions

International Journal of Plasticity
2013 | Journal article
EID:

2-s2.0-84885190436

Part of ISBN:

07496419

Contributors: Puchi-Cabrera, E.S.; Staia, M.H.; Guérin, J.D.; Lesage, J.; Dubar, M.; Chicot, D.
Source: Self-asserted source
Jean-Dominique GUERIN via Scopus - Elsevier

Plastic deformation of structural steels under hot-working conditions

Materials Science and Engineering A
2013 | Journal article
EID:

2-s2.0-84867743758

Part of ISBN:

09215093

Contributors: Puchi-Cabrera, E.S.; Guérin, J.D.; Barbier, D.; Dubar, M.; Lesage, J.
Source: Self-asserted source
Jean-Dominique GUERIN via Scopus - Elsevier

Coating cohesion and adhesion - Assessment of stresses in plasma sprayed coatings applied to railway disc brakes

Proceedings of the 18th International Conference on Surface Modification Technologies
2006 | Conference paper
EID:

2-s2.0-33645973290

Contributors: Watremez, M.; Guerin, J.D.; Bricout, J.P.
Source: Self-asserted source
Jean-Dominique GUERIN via Scopus - Elsevier

Hot ductility study of continuous casting steels

Journal of Materials Science and Technology
2004 | Journal article
EID:

2-s2.0-16644382275

Part of ISBN:

10050302

Contributors: Revaux, T.; Guérin, J.D.; Bricout, J.P.
Source: Self-asserted source
Jean-Dominique GUERIN via Scopus - Elsevier

Fretting wear properties of CrN and Cr<inf>2</inf>N coatings

Surface and Coatings Technology
2003 | Journal article
EID:

2-s2.0-0042829295

Part of ISBN:

02578972

Contributors: Tricoteaux, A.; Jouan, P.Y.; Guerin, J.D.; Martinez, J.; Djouadi, A.
Source: Self-asserted source
Jean-Dominique GUERIN via Scopus - Elsevier

A comparative study of plasma sprayed coatings on railway brake discs

Surface Engineering
2001 | Journal article
EID:

2-s2.0-0034795898

Part of ISBN:

02670844

Contributors: Bartys, H.; Guerin, J.D.; Watremez, M.; Bricout, J.P.
Source: Self-asserted source
Jean-Dominique GUERIN via Scopus - Elsevier

Admissible stresses in thermal sprayed coatings

Key Engineering Materials
2001 | Book
EID:

2-s2.0-0034783049

Part of ISBN:

10139826

Contributors: Watremez, M.; Renaux, T.; Guerin, J.D.; Bricout, J.P.
Source: Self-asserted source
Jean-Dominique GUERIN via Scopus - Elsevier

Characterization of Co- and Ni-based superalloy coated railway braking discs,Caractérisation de disques de freins ferroviaires revêtus de superalliages Co ou Ni

Mecanique et Industries
2000 | Journal article
EID:

2-s2.0-0034363911

Part of ISBN:

12962139

Contributors: Bartys, H.; Guérin, J.-D.; Bricout, J.-P.; Oudin, J.
Source: Self-asserted source
Jean-Dominique GUERIN via Scopus - Elsevier

Frictional characteristics of Al-SiC composite brake discs

Tribology Letters
2000 | Journal article
EID:

2-s2.0-2542442319

Part of ISBN:

10238883

Contributors: Laden, K.; Guérin, J.D.; Watremez, M.; Bricout, J.P.
Source: Self-asserted source
Jean-Dominique GUERIN via Scopus - Elsevier

Finite element implementation of a generalized friction model: Application to an upsetting-sliding test

Finite Elements in Analysis and Design
1999 | Journal article
EID:

2-s2.0-0344780743

Part of ISBN:

0168874X

Contributors: Guérin, J.D.; Bartys, H.; Dubois, A.; Oudin, J.
Source: Self-asserted source
Jean-Dominique GUERIN via Scopus - Elsevier

Thermal spraying applied onto high energy railway braking: Characterization of friction performances

Proceedings of the International Thermal Spray Conference
1998 | Conference paper
EID:

2-s2.0-0002218033

Contributors: Bartys, H.; Guerin., J.D.; Bricout, J.P.; Oudin, J.
Source: Self-asserted source
Jean-Dominique GUERIN via Scopus - Elsevier

High thermal diffusivity materials for railway brake discs

Tribology Letters
1997 | Journal article
EID:

2-s2.0-0002094387

Part of ISBN:

10238883

Contributors: Guérin, J.D.; Bricout, J.P.; Laden, K.; Watremez, M.
Source: Self-asserted source
Jean-Dominique GUERIN via Scopus - Elsevier

High temperature tension tests after in situ remelting : Application to steels and cast irons

Revue de Metallurgie. Cahiers D'Informations Techniques
1996 | Journal article
EID:

2-s2.0-8344250191

Part of ISBN:

00351563

Contributors: Revaux, T.; Guérin, J.D.; Bricout, J.P.; Tissier, J.C.
Source: Self-asserted source
Jean-Dominique GUERIN via Scopus - Elsevier

Essais de traction à haute température après refusion in situ : application aux aciers et aux fontes

Revue de Métallurgie
1996-12 | Journal article
Part of ISSN: 0035-1563
Part of ISSN: 1156-3141
Contributors: T. Revaux; J.D. Guérin; J.P. Bricout; J.C. Tissier
Source: Self-asserted source
Jean-Dominique GUERIN

Analytical and finite-element analysis of insitu solidified specimen upsetting

Journal of Materials Processing Tech.
1995 | Journal article
EID:

2-s2.0-0029252282

Part of ISBN:

09240136

Contributors: Guérin, J.D.; Oudin, J.; Bricout, J.P.
Source: Self-asserted source
Jean-Dominique GUERIN via Scopus - Elsevier

Finite-element analysis of the initial stage of the indentation-rotation test for phosphate and stearate coatings

Journal of Materials Processing Tech.
1994 | Journal article
EID:

2-s2.0-0028378635

Part of ISBN:

09240136

Contributors: Wierre, C.; Guerin, J.D.; Oudin, J.; Bricout, J.P.
Source: Self-asserted source
Jean-Dominique GUERIN via Scopus - Elsevier