Personal information

Emails & domains

Verified email domains

Other IDs

Scopus Author ID: 55354124200
Scopus Author ID: 56077296800
ResearcherID: ABD-3495-2020

Activities

Collapse all

Employment (1)

VSB - Technical University of Ostrava: Ostrava, CZ

Employment
Source: check_circle
VŠB - Technická univerzita Ostrava

Education and qualifications (1)

VŠB - Technical Univesity of Ostrava: Ostrava, CZ

Education
Source: Self-asserted source
Jana Petru

Works (50 of 145)

Items per page:
Page 1 of 3

An experimental and modelling approach to proclaim sustainable machining using avocado oil-based nano-cutting fluids

Scientific Reports
2025 | Journal article
DOI: 10.1038/S41598-024-84309-Z
WOSUID: WOS:001396051700041
Contributors: Anebo, Abera Ayza; Chenrayan, Venkatesh; Shahapurkar, Kiran; Gebremaryam, Gezahgn; Petru, Jana; Soudagar, Manzoore Elahi M.; Bhaviripudi, Vijayabhaskara Rao; Rajagopal, Rajakrishnan; Bashir, Muhammad Nasir
Source: check_circle
Web of Science Researcher Profile Sync

Optimisation of Abrasive Waterjet Milling Technique for Pocket Milling Operations

2025 | Book chapter
DOI: 10.1007/978-3-031-72778-8_9
Contributors: Akash Nag; Dagmar Klichová; Petr Hlaváček; Jana Petrů; Sergej Hloch
Source: check_circle
Crossref

Machine learning-driven analysis of erosion resistance in ZrSiO4/Al2O3 reinforced A356 hybrid composites: Integration of CART algorithm with Taguchi optimization

Journal of Materials Research and Technology
2025-05 | Journal article
DOI: 10.1016/j.jmrt.2025.03.107
Contributors: T Satish Kumar; S. Shalini; Jana Petrů; M.K. Mishra; N. Jeyaprakash; Kanak Kalita
Source: check_circle
Crossref

Trade-off analysis of machinability of steel alloy AISI 304L using Taguchi-grey integrated approach

Journal of Materials Research and Technology
2025-03 | Journal article
DOI: 10.1016/j.jmrt.2025.03.070
Contributors: Faisal Abbas; Muhammad Ali Khan; Muhammad Iftikhar Faraz; Syed Husain Imran Jaffery; Sohail Akram; Jana Petru; Refka Ghodhbani; Walid M. Shewakh
Source: check_circle
Crossref

Optimization of Zero-Point Setting for Enhanced Measurement Accuracy

Manufacturing Technology
2025-03-27 | Journal article
DOI: 10.21062/mft.2025.014
Contributors: Miroslav Matuš; Mário Drbúl; Jaromír Markovič; Michal Šajgalík; Andrej Czán; Miroslav Cedzo; Richard Joch; Martin Novák; Jana Petru
Source: check_circle
Crossref

A bibliometric review on application of machine learning in additive manufacturing and practical justification

Applied Materials Today
2024 | Journal article
DOI: 10.1016/J.APMT.2024.102371
WOSUID: WOS:001290079400001
Contributors: Ma, Quoc-Phu; Nguyen, Hoang-Sy; Hajnys, Jiri; Mesicek, Jakub; Pagac, Marek; Petru, Jana
Source: check_circle
Web of Science Researcher Profile Sync

ABRASIVE SURFACE TREATMENT OF ALSI10MG PARTS MADE BY L-PBF

MM Science Journal
2024 | Journal article
DOI: 10.17973/MMSJ.2024_02_2023134
WOSUID: WOS:001193268500001
Contributors: Mechali, A.; Mesicek, J.; Ma, Q-P; Hajnys, J.; Gautam, P.; Blaha, R.; Krisak, D.; Petru, J.
Source: check_circle
Web of Science Researcher Profile Sync

Achieving sustainable machining of titanium grade 3 alloy through optimization using grey relational analysis (GRA)

Results in Engineering
2024 | Journal article
DOI: 10.1016/J.RINENG.2024.102355
WOSUID: WOS:001253622300001
Contributors: Ahmad, Adnan; Khan, Muhammad Ali; Akram, Sohail; Faraz, Muhammad Iftikhar; Jaffery, Syed Husain Imran; Iqbal, Tahir; Petru, Jana
Source: check_circle
Web of Science Researcher Profile Sync

Application of Instrumented Indentation Test and Neural Networks to determine the constitutive model of in-situ austenitic stainless steel components

Archives of Civil and Mechanical Engineering
2024 | Journal article
DOI: 10.1007/S43452-024-00922-9
WOSUID: WOS:001209743700001
Contributors: Ma, Quoc-Phu; Basterrech, Sebastian; Halama, Radim; Omacht, Daniel; Mesicek, Jakub; Hajnys, Jiri; Platos, Jan; Petru, Jana
Source: check_circle
Web of Science Researcher Profile Sync

CLAMPING TOOLS PRINTED FROM ONYX AND USED IN INDUSTRIAL MANUFACTURING PROCESS

MM Science Journal
2024 | Journal article
DOI: 10.17973/MMSJ.2024_11_2024084
WOSUID: WOS:001350512300001
Contributors: Prusa, Michal; Nemecek, Petr; Hajnys, Jiri; Mesicek, Jakub; Trefil, Antonin; Pagac, Marek; Petru, Jana; Cep, Robert
Source: check_circle
Web of Science Researcher Profile Sync

COMPARISON OF VIBRATIONAL TUMBLING AND ELECTROLYTIC POLISHING ON SURFACE ROUGHNESS PARAMETERS OF ADDITIVELY MANUFACTURED INCONEL 718 ALLOY

MM Science Journal
2024 | Journal article
DOI: 10.17973/MMSJ.2024_10_2024079
WOSUID: WOS:001326839900001
Contributors: Gautam, Preeti; Nag, Akash; Hajnys, Jiri; Mesicek, Jakub; Mechali, Abdesselam; Blaha, Roman; Petru, Jana
Source: check_circle
Web of Science Researcher Profile Sync

EFFECT OF BUILD POSITION ON SURFACE ROUGHNESS OF SLM PRINTED INCONEL 718

MM Science Journal
2024 | Journal article
DOI: 10.17973/MMSJ.2024_10_2024064
WOSUID: WOS:001329173000001
Contributors: Gautam, Preeti; Hajnys, Jiri; Mesicek, Jakub; Nag, Akash; Ma, Quoc-Phu; Petru, Jana
Source: check_circle
Web of Science Researcher Profile Sync

Effect of the shape of flapping airfoils on aerodynamic forces

Heliyon
2024 | Journal article
DOI: 10.1016/J.HELIYON.2024.E29561
WOSUID: WOS:001231211000001
Contributors: Butt, Fahad; Talha, Tariq; Khan, Rehan; Mazhar, Abdur Rehman; Butt, Mahad; Petru, Jana; Seikh, Asiful H.
Source: check_circle
Web of Science Researcher Profile Sync

EFFECT OF TUMBLING ON THE M300 MARAGING STEEL PARTS MADE BY SELECTIVE LASER MELTING

MM Science Journal
2024 | Journal article
DOI: 10.17973/MMSJ.2024_10_2024068
WOSUID: WOS:001326840600001
Contributors: Mechali, Abdesselam; Hlinka, Josef; Mesicek, Jakub; Hajnys, Jiri; Zelinka, Jan; Krisak, Dominik; Cepova, Linka; Blaha, Roman; Cep, Robert; Petru, Jana
Source: check_circle
Web of Science Researcher Profile Sync

Experimental Evaluation of Machinability of Monel 400 Alloy During High Speed Micro Milling Using Various Tool Coatings

Advances in Science and Technology Research Journal
2024 | Journal article
DOI: 10.12913/22998624/190624
WOSUID: WOS:001310386300026
Contributors: Baig, Amjad; Khan, Muhammad Ali; Jaffery, Syed Husain Imran; Khan, Mushtaq; Naseer, Rashid; Shah, Imran; Petru, Jana
Source: check_circle
Web of Science Researcher Profile Sync

EXPLORING THE IMPACT OF SALINE ENVIRONMENTS ON THE PROPERTIES OF EOS PA2200: A STUDY ON WEIGHT GAIN AND MECHANICAL CHARACTERISTICS

MM Science Journal
2024 | Journal article
DOI: 10.17973/MMSJ.2024_10_2024074
WOSUID: WOS:001326838700001
Contributors: Mesicek, J.; Vacek, M.; Ma, Q. P.; Krejsa, M.; Hajnys, J.; Krivy, V.; Pagac, M.; Petru, J.
Source: check_circle
Web of Science Researcher Profile Sync

FRAME DESIGN OF INLINE SKATES MADE BY ADDITIVE TECHNOLOGY

MM Science Journal
2024 | Journal article
DOI: 10.17973/MMSJ.2024_02_2023135
WOSUID: WOS:001284803500001
Contributors: Posmykova, E.; Hruban, J.; Mesicek, J.; Blaha, R.; Ma, Q. -P; Hajnys, J.; Petru, J.
Source: check_circle
Web of Science Researcher Profile Sync

Influence of pH value on erosive wear of 3D-printed polylactic acid for multiphase flow

Materials Research Express
2024 | Journal article
DOI: 10.1088/2053-1591/AD75E5
WOSUID: WOS:001308944700001
Contributors: Mahad, Syed Muhammad; Khan, Rehan; Wieczorowski, Michal; Petru, Jana; Seikh, Asiful H.; Alnaser, Ibrahim A.
Source: check_circle
Web of Science Researcher Profile Sync

Investigation of factors affecting the sound absorption behaviour of 3D printed hexagonal prism lattice polyamide structures

Scientific Reports
2024 | Journal article
DOI: 10.1038/S41598-024-81496-7
WOSUID: WOS:001385854400029
Contributors: Vasina, Martin; Mesicek, Jakub; Manek, Martin; Ma, Quoc-Phu; Hajnys, Jiri; Petru, Jana
Source: check_circle
Web of Science Researcher Profile Sync

Mechanical, corrosion and tribocorrosion resistance of additively manufactured Maraging C300 steel

Tribology International
2024 | Journal article
DOI: 10.1016/J.TRIBOINT.2024.109604
WOSUID: WOS:001218303800001
Contributors: Wieczorek, Daniel; Ulbrich, Dariusz; Stachowiak, Arkadiusz; Bartkowski, Dariusz; Bartkowska, Aneta; Petru, Jana; Hajnys, Jirf; Popielarski, Pawel
Source: check_circle
Web of Science Researcher Profile Sync

RESEARCH ABOUT M300 MARAGING STEEL METALLIC POWDER FOR USE IN SLM 3D PRINTING

MM Science Journal
2024 | Journal article
DOI: 10.17973/MMSJ.2024_10_2024080
WOSUID: WOS:001326839200001
Contributors: Mechali, Abdesselam; Sadilek, Marek; Mrkvica, Ivan; Hlinka, Josef; Jahan, Ibrahim; Pagac, Marek; Gautam, Preeti; Mesick, Jakub; Hajnys, Jiri; Petru, Jana
Source: check_circle
Web of Science Researcher Profile Sync

Sustainability assessment of machining Al 6061-T6 using Taguchi-grey relation integrated approach

Heliyon
2024 | Journal article
DOI: 10.1016/J.HELIYON.2024.E33726
WOSUID: WOS:001269353300001
Contributors: Zaidi, Sajid Raza; Butt, Shahid Ikramullah; Khan, Muhammad Ali; Faraz, Muhammad Iftikhar; Jaffery, Syed Husain Imran; Petru, Jana
Source: check_circle
Web of Science Researcher Profile Sync

Proposes Geometric Accuracy and Surface Roughness Estimation of Anatomical Models of the Pelvic Area Manufactured Using a Material Extrusion Additive Technique

Applied Sciences
2024-12-27 | Journal article
DOI: 10.3390/app15010134
Contributors: Paweł Turek; Sławomir Snela; Grzegorz Budzik; Anna Bazan; Jarosław Jabłoński; Łukasz Przeszłowski; Robert Wojnarowski; Tomasz Dziubek; Jana Petru
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Effect of Powder Recycling on the Surface and Selected Technological Properties of M300 Maraging Steel Produced via the SLM Method

Journal of Manufacturing and Materials Processing
2024-11-27 | Journal article
DOI: 10.3390/jmmp8060267
Contributors: Abdesselam Mechali; Josef Hlinka; Michal Kresta; Marin Petrovic; Jakub Mesicek; Ibrahim Jahan; Jiri Hajnys; Jana Petru
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Thermomechanical and Structural Analysis of Manufactured Composite Based on Polyamide and Aluminum Recycled Material

Polymers
2024-09-27 | Journal article
DOI: 10.3390/polym16192742
Contributors: Adam Gnatowski; Rafał Gołębski; Krystian Stachowiak; Jana Petrů; Jakub Měsíček
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Evaluation of the Influence of the Tool Set Overhang on the Tool Wear and Surface Quality in the Process of Finish Turning of the Inconel 718 Alloy

Materials
2024-09-11 | Journal article
DOI: 10.3390/ma17184465
Contributors: Krzysztof Smak; Piotr Szablewski; Stanisław Legutko; Jana Petru; Jiri Kratochwil; Sylwia Wencel
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

MAXIMIZATION OF WEAR RATES THROUGH EFFECTIVE CONFIGURATION OF STANDOFF DISTANCE AND HYDRAULIC PARAMETERS IN ULTRASONIC PULSATING WATERJET

Facta Universitatis, Series: Mechanical Engineering
2024-07-31 | Journal article
DOI: 10.22190/FUME220523045N
Contributors: Akash Nag; Amit Rai Dixit; Jana Petrů; Petra Váňová; Kateřina Konečná; Sergej Hloch
Source: check_circle
Crossref

Dynamic Stability of the Periodic and Aperiodic Structures of the Bernoulli-Euler Beams

Archives of Metallurgy and Materials
2024-04-11 | Journal article
DOI: 10.24425/amm.2024.147819
Contributors: J. Garus; J. Petrů; W. Sochacki; S. Garus
Source: check_circle
Crossref

Proposal of a Framework for Evaluating the Importance of Production and Maintenance Integration Supported by the Use of Ordinal Linguistic Fuzzy Modeling

Mathematics
2024-01-19 | Journal article
DOI: 10.3390/math12020338
Contributors: Ronald Díaz Cazañas; Daynier Rolando Delgado Sobrino; Estrella María De La Paz Martínez; Jana Petru; Carlos Daniel Díaz Tejeda
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

ADITIVE MANUFACTURING OF M300 STEEL CUTTING TOOLS BY SELECTIVE LASER MELTING

MM Science Journal
2023 | Journal article
DOI: 10.17973/MMSJ.2023_10_2023055
WOSUID: WOS:001078914200001
Contributors: Machac, Tomas; Pokorny, Peter; Petru, Jana; Hrbal, Jakub; Kuruc, Marcel; Vopat, Tomas
Source: check_circle
Web of Science Researcher Profile Sync

FRAME DESIGN OF INLINE SKATES MADE BY ADDITIVE TECHNOLOGY

MM Science Journal
2023 | Journal article
DOI: 10.17973/MMSJ.2024022023135
WOSUID: WOS:001193632600001
Contributors: Posmykova, E.; Hruban, J.; Meslcek, J.; Blaha, R.; Ma, Q-p; Hajnys, J.; Petru, J.
Source: check_circle
Web of Science Researcher Profile Sync

Investigation of the suitability of a fused filament fabricated tool for incremental sheet metal forming

Computer Methods in Material Science
2023 | Journal article
DOI: 10.7494/cmms.2023.1.0804
Contributors: Dieter Weise; Christian Langner; Alexander Pierer; Verena Kraeusel; Jana Petru; Jiri Koziorek; Michal Prauzek
Source: check_circle
Crossref

Evaluation of Machining Variables on Machinability of Nickel Alloy Inconel 718 Using Coated Carbide Tools

Machines
2023-12-20 | Journal article
DOI: 10.3390/machines12010004
Contributors: Muhammad Iftikhar Faraz; Jana Petru
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Erosion impact on mild steel elbow pipeline for different orientations under liquid-gas-sand annular flow

Engineering Failure Analysis
2023-11 | Journal article
DOI: 10.1016/j.engfailanal.2023.107565
Contributors: Rehan Khan; A-H.I. Mourad; A.H. Seikh; Jana Petru; Hamdan H.Ya
Source: check_circle
Crossref

A Bibliometrics Analysis of Medical Internet of Things for Modern Healthcare

Electronics
2023-11-10 | Journal article
DOI: 10.3390/electronics12224586
Contributors: Hoang-Sy Nguyen; Huynh-Cong Danh; Quoc-Phu Ma; Jakub Mesicek; Jiri Hajnys; Marek Pagac; Jana Petru
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Parametric Analysis of Tool Wear, Surface Roughness and Energy Consumption during Turning of Inconel 718 under Dry, Wet and MQL Conditions

Machines
2023-11-03 | Journal article
DOI: 10.3390/machines11111008
Contributors: M. Zeeshan Siddique; Muhammad Iftikhar Faraz; Shahid Ikramullah Butt; Rehan Khan; Jana Petru; Syed Husain Imran Jaffery; Muhammad Ali Khan; Abdul Malik Tahir
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Determination of the Influence of the Tool Side Stress Superposition and Tool Geometry on the Cut Surface Quality during Precision Shear Cutting

Journal of Manufacturing and Materials Processing
2023-08-08 | Journal article
DOI: 10.3390/jmmp7040145
Contributors: Alexander Graf; Verena Kräusel; Dieter Weise; Jana Petrů; Jiří Koziorek; Pravishan Bhandari
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Analysis of the Impact of Changes in Thermomechanical Properties of Annealed Semi-Crystalline Plastics on the Surface Condition after the Machining Process

Materials
2023-07-04 | Journal article
DOI: 10.3390/ma16134816
Contributors: Adam Gnatowski; Rafal Golebski; Piotr Sikora; Jana Petru; Jiri Hajnys
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Comparison of Continuous and Pulsating Water Jet during Piercing of Ductile Material

Materials
2023-05-06 | Journal article
DOI: 10.3390/ma16093558
Contributors: Akash Nag; Madhulika Srivastava; Jana Petrů; Petra Váňová; Ashish Kumar Srivastava; Sergej Hloch
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Influence of material distribution and damping on the dynamic stability of Bernoulli-Euler beams

Bulletin of the Polish Academy of Sciences Technical Sciences
2023-04-01 | Journal article
DOI: 10.24425/bpasts.2023.145567
Contributors: Sebastian Garus; Justyna Garus; Wojciech Sochacki; Marcin Nabiałek; Jana Petru; Wojciech Borek; Michal Šofer; Paweł Kwiatoń
Source: check_circle
Crossref

Research into Specific Mechanical Properties of Composites Produced by 3D-Printing Additive Continuous-Fiber Fabrication Technology

Materials
2023-02 | Journal article | Author
DOI: 10.3390/ma16041459
Contributors: Peter Pokorny; Daynier Rolando Delgado Sobrino; Stefan Vaclav; Jana Petru; Rafał Gołębski
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎

Influence of spatial distribution and the type of material on the occurrence of bandgaps in phononic crystals

Bulletin of the Polish Academy of Sciences Technical Sciences
2023-02-06 | Journal article
DOI: 10.24425/bpasts.2023.144609
Contributors: Sebastian Garus; Wojciech Sochacki; Paweł Kwiatoń; Marcin Nabiałek; Jana Petrů; Mariusz Kubanek
Source: check_circle
Crossref

On flexural properties of additive manufactured composites: Experimental, and numerical study

Composites Science and Technology
2022 | Journal article
DOI: 10.1016/J.COMPSCITECH.2021.109182
WOSUID: WOS:000735525800002
Contributors: Krzikalla, David; Mesicek, Jakub; Halama, Radim; Hajnys, Jiri; Pagac, Marek; Cegan, Tomas; Petru, Jana
Source: check_circle
Web of Science Researcher Profile Sync

Surface Modification and Parametric Optimization of Tensile Strength of Al6082/SiC/Waste Material Surface Composite Produced by Friction Stir Processing

Coatings
2022-12 | Journal article | Author
DOI: 10.3390/coatings12121909
Contributors: Nitesh Kumar; Rakesh Kumar Singh; Dr. Ashish Kumar Srivastava; Akash Nag; Jana Petru; Sergej Hloch
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎

Multi-Objective Optimization of Process Parameters during Micro-Milling of Nickel-Based Alloy Inconel 718 Using Taguchi-Grey Relation Integrated Approach

Materials
2022-11 | Journal article | Author
DOI: 10.3390/ma15238296
Contributors: Muhammad Sheheryar; Muhammad Ali Khan; Syed Husain Imran Jaffery; Mansoor Alruqi; Rehan Khan; Muhammad Nasir Bashir; Jana Petru
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎

Statistical Analysis of Machining Parameters on Burr Formation, Surface Roughness and Energy Consumption during Milling of Aluminium Alloy Al 6061-T6

Materials
2022-11 | Journal article | Author
DOI: 10.3390/ma15228065
Contributors: Sajid Raza Zaidi; Najam Qadir; Syed Husain Imran Jaffery; Muhammad Ali Khan; Mushtaq Khan; Jana Petru
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎

Enhancement of Magnetic and Dielectric Properties of Ni<sub>0</sub>.<sub>25</sub>Cu<sub>0</sub>.<sub>25</sub>Zn<sub>0</sub>.<sub>50</sub>Fe<sub>2</sub>O<sub>4</sub> Magnetic Nanoparticles through Non-Thermal Microwave Plasma Treatment for High-Frequency and Energy Storage Applications

Materials
2022-10 | Journal article | Author
DOI: 10.3390/ma15196890
Contributors: Muhammad Adnan Munir; Muhammad Yasin Naz; Shazia Shukrullah; Muhammad Tamoor Ansar; M.U. Farooq; Dr. Muhammad Irfan; Salim Nasar Faraj Mursal; Stanislaw Legutko; Jana Petru; Marek Pagac
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎

Residual Stress Build-Up in Aluminum Parts Fabricated with SLM Technology Using the Bridge Curvature Method

Materials
2022-09 | Journal article | Author
DOI: 10.3390/ma15176057
Contributors: Quoc-Phu Ma; Jakub Měsíček; Frantisek Fojtik; Jiri Hajnys; Pavel Krpec; Marek Pagac; Jana Petru
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎

Analysis of Thermomechanical Properties and the Influence of Machining Process on the Surface Structure of Composites Manufactured from Metal Chips with a Polymer Matrix

Polymers
2022-08 | Journal article | Author
DOI: 10.3390/polym14173501
Contributors: Adam Gnatowski; Rafał Gołębski; Jana Petru; Marek Pagac
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎

Performance Prediction of Erosive Wear of Steel for Two-Phase Flow in an Inverse U-Bend

Materials
2022-08 | Journal article | Author
DOI: 10.3390/ma15165558
Contributors: Saifur Rahman; Rehan Khan; Niazi; Stanislaw Legutko; Muhammad Ali Khan; Bilal Anjum Ahmed; Jana Petru; Jiri Hajnys; Dr. Muhammad Irfan
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎
Items per page:
Page 1 of 3

Peer review (10 reviews for 7 publications/grants)

Review activity for Applied sciences. (3)
Review activity for Archive of Mechanical Engineering. (1)
Review activity for Energies. (1)
Review activity for International journal of solids and structures. (1)
Review activity for Materials. (2)
Review activity for Micromachines. (1)
Review activity for Proceedings of the Institution of Mechanical Engineers. (1)
How many people are using ORCID?