Personal information

Activities

Employment (2)

University of Twente: Enschede, NL

2021-08-16 to present | Postdoctoral researcher
Employment
Source: Self-asserted source
Gerjan Wolterink

University of Twente: Enschede, NL

2023-06-30
Employment
Source: check_circle
University of Twente Research Information (Pure Portal)

Education and qualifications (1)

University of Twente: Enschede, NL

2014-09-01 to 2022-02-11 | PhD
Education
Source: Self-asserted source
Gerjan Wolterink

Works (21)

Novel 3D printed capacitive shear stress sensor

Additive manufacturing
2023-07-05 | Journal article | Author
SOURCE-WORK-ID:

0608b78c-1071-4079-aa60-c804a1e3ab13

EID:

2-s2.0-85165881151

Contributors: Jens Oprel; Gerjan Wolterink; Jurnan Schilder; Gijs J.M. Krijnen
Source: check_circle
University of Twente Research Information (Pure Portal)
grade
Preferred source (of 2)‎

3D Printed Soft Robotic Actuator With Embedded Strain Sensing For Position Estimation

2022 IEEE SENSORS - Conference Proceedings
2022 | Conference paper | Author
SOURCE-WORK-ID:

26432688-e9ab-4be5-b0e4-2e6714ef7302

EID:

2-s2.0-85144010232

Part of ISBN: 978-1-6654-8464-0
Part of ISBN: 978-1-6654-8465-7
Contributors: Gerjan Wolterink; Stijn Kolkman; Gijs J.M. Krijnen
Source: check_circle
University of Twente Research Information (Pure Portal)

The SoftPro Wearable System for Grasp Compensation in Stroke Patients

Wearable Robotics: Challenges and Trends
2022 | Book chapter | Author
SOURCE-WORK-ID:

da7d647e-8cb2-4013-adcb-99806e95553a

EID:

2-s2.0-85109508460

Part of ISBN: 978-3-030-69547-7
Part of ISBN: 978-3-030-69546-0
Part of ISBN: 978-3-030-69549-1
Contributors: L. Franco; Martin Tschiersky; Gerjan Wolterink; F. Barontini; M. Poggiani; M. Catalano; G. Grioli; M. Bianchi; A. Bicchi; S. Rossi et al.
Source: check_circle
University of Twente Research Information (Pure Portal)

Evaluation of a 3D Printed Soft Sensor for Measuring Fingertip Interaction Forces

IEEE Sensors Journal
2022-06-15 | Journal article
Contributors: Gerjan Wolterink; Dimitrios Kosmas; Martijn Schouten; Bert-Jan F. van Beijnum; Peter H. Veltink; Gijs Krijnen
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

3D printed sensing systems for upper extremity assessment

2022-02-11 | Dissertation or Thesis | Author
SOURCE-WORK-ID:

cf8473ac-5f1a-47b8-b940-733f9ab68bb6

Contributors: Gerjan Wolterink
Source: check_circle
University of Twente Research Information (Pure Portal)

New methods for the monitoring of nocturnal erections

International Journal of Impotence Research
2022-01 | Journal article | Author
SOURCE-WORK-ID:

a684150e-ff34-4467-82cf-7f918fe4e47c

EID:

2-s2.0-85093842285

WOSUID:

000583366300001

Contributors: Roos Edgar; Evelien J. Trip; Gerjan Wolterink; Peter Veltink; Jack J. H. Beck
Source: check_circle
University of Twente Research Information (Pure Portal)
grade
Preferred source (of 2)‎

Raspberry-bioamplifier

2021-12-02 | Software | Author
SOURCE-WORK-ID:

f88c1ee9-ed86-44e2-a487-1c470d088c99

Contributors: Martijn Schouten; Gerjan Wolterink; Eric Pérez; Remco G.P. Sanders; Gijs J.M. Krijnen
Source: check_circle
University of Twente Research Information (Pure Portal)

A 3D-Printed Soft Fingertip Sensor for Providing Information about Normal and Shear Components of Interaction Forces

Sensors
2021-06-22 | Journal article
Contributors: Gerjan Wolterink; Remco Sanders; Bert-Jan van Beijnum; Peter Veltink; Gijs Krijnen
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Integration of a Passive Exoskeleton and a Robotic Supernumerary Finger for Grasping Compensation in Chronic Stroke Patients

Frontiers in robotics and AI
2021-06-10 | Journal article | Author
SOURCE-WORK-ID:

d0d89271-ab29-44ff-b49f-485b3361b318

EID:

2-s2.0-85108600404

Contributors: Gionata Salvietti; Leonardo Franco; Martin Tschiersky; Gerjan Wolterink; Matteo Bianchi; Antonio Bicchi; Federica Barontini; Manuel Catalano; Giorgio Grioli; Mattia Poggiani et al.
Source: check_circle
University of Twente Research Information (Pure Portal)

A Review of Extrusion-Based 3D Printing for the Fabrication of Electro- and Biomechanical Sensors

IEEE sensors journal
2021-06-01 | Journal article | Author
SOURCE-WORK-ID:

b3443da5-a9bd-4b11-866e-6b2aa409a223

EID:

2-s2.0-85097952414

WOSUID:

000655846200046

Contributors: Martijn Schouten; Gerjan Wolterink; Alexander Dijkshoorn; Dimitrios Kosmas; Stefano Stramigioli; Gijs J.M. Krijnen
Source: check_circle
University of Twente Research Information (Pure Portal)
grade
Preferred source (of 2)‎

3D-Printed Calorimetric Flow Sensor

2020 IEEE Sensors
2020-12-09 | Conference paper | Author
SOURCE-WORK-ID:

61cd416c-b06e-45a3-9673-b51a324fbd50

EID:

2-s2.0-85098682711

Part of ISBN: 978-1-7281-6801-2
Part of ISBN: 978-1-7281-6802-9
Contributors: Gerjan Wolterink; Ameya Umrani; Martijn Schouten; Remco G.P. Sanders; Gijs J.M. Krijnen
Source: check_circle
University of Twente Research Information (Pure Portal)

Quantifying Pathological Synergies in the Upper Extremity of Stroke Subjects With the Use of Inertial Measurement Units: A Pilot Study

IEEE journal of translational engineering in health and medicine
2020-12-07 | Journal article | Author
SOURCE-WORK-ID:

98178c74-9774-4315-b801-1b589afb74b3

EID:

2-s2.0-85097931955

Contributors: Miguel Maiur Claro Bhagubai; Gerjan Wolterink; Anne Schwarz; Jeremia Held; Bert-Jan VAN BEIJNUM; Peter Veltink
Source: check_circle
University of Twente Research Information (Pure Portal)
grade
Preferred source (of 2)‎

Characterizing the Electrical Properties of Anisotropic, 3D-Printed Conductive Sheets for Sensor Applications

IEEE sensors journal
2020-12-01 | Journal article | Author
SOURCE-WORK-ID:

072b97e1-c17c-42d7-9368-f700843d732d

WOSUID:

000589257300042

EID:

2-s2.0-85096234620

WOSUID:

000589257300042

Contributors: Alexander Dijkshoorn; Martijn Schouten; Gerjan Wolterink; Remco G.P. Sanders; Stefano Stramigioli; Gijs J.M. Krijnen
Source: check_circle
University of Twente Research Information (Pure Portal)
grade
Preferred source (of 2)‎

Assessment of Upper Limb Movement Impairments after Stroke Using Wearable Inertial Sensing

Sensors
2020-08 | Journal article | Author
Contributors: Anne Schwarz; Miguel Bhagubai; Gerjan Wolterink; Jeremia P. O. Held; Andreas R. Luft; Peter Veltink
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 3)‎

Development of Soft sEMG Sensing Structures Using 3D-Printing Technologies

Sensors
2020-07 | Journal article | Author
Contributors: Gerjan Wolterink; Pedro Dias; Remco G. P. Sanders; Frodo Muijzer; Bert-Jan van Beijnum; Peter Veltink; Gijs J.M. Krijnen
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 3)‎

A flexible, three material, 3D-printed, shear force sensor for use on finger tips

IEEE Sensors
2019-10-27 | Conference paper | Author
SOURCE-WORK-ID:

471fbdad-93df-4f97-bdff-0807c5dcb605

EID:

2-s2.0-85078708043

Part of ISBN: 978-1-7281-1634-1
Contributors: Gerjan Wolterink; Remco Sanders; Gijs J.M. Krijnen
Source: check_circle
University of Twente Research Information (Pure Portal)

Characterizing the Electrical Properties of Anisotropic, 3D-Printed Conductive Sheets

IEEE International Conference on Flexible and Printable Sensors and Systems, FLEPS 2019
2019-08-08 | Conference paper | Author
SOURCE-WORK-ID:

95ad6841-f457-4564-ae6a-6984e88d9b85

EID:

2-s2.0-85071392125

Part of ISBN: 9781538693049
Contributors: Alexander Dijkshoorn; Martijn Schouten; Gerjan Wolterink; Remco Sanders; Gijs J.M. Krijnen
Source: check_circle
University of Twente Research Information (Pure Portal)

Thin, Flexible, Capacitive Force Sensors Based on Anisotropy in 3D-Printed Structures

2018 IEEE SENSORS
2018-10 | Conference paper
Part of ISBN: 9781538647073
Contributors: Gerjan Wolterink; Remco Sanders; Gijs Krijnen
Source: Self-asserted source
Gerjan Wolterink via Crossref Metadata Search
grade
Preferred source (of 2)‎

Embedded sensing: integrating sensors in 3-D printed structures

Journal of Sensors and Sensor Systems
2018-03 | Journal article
Part of ISSN: 2194-878X
Contributors: Alexander Dijkshoorn; Patrick Werkman; Marcel Welleweerd; Gerjan Wolterink; Bram Eijking; John Delamare; Remco Sanders; Gijs J. M. Krijnen
Source: Self-asserted source
Gerjan Wolterink via Crossref Metadata Search
grade
Preferred source (of 2)‎

3D-printing soft sEMG sensing structures

2017 IEEE SENSORS
2017-10 | Conference paper
Part of ISBN: 9781509010127
Contributors: Gerjan Wolterink; Remco Sanders; Frodo Muijzer; Bert-Jan van Beijnum; Gijs Krijnen
Source: Self-asserted source
Gerjan Wolterink via Crossref Metadata Search
grade
Preferred source (of 2)‎

Embedded Sensing

Proceedings Sensor 2017
2017-05-30 | Conference paper | Author
SOURCE-WORK-ID:

d04100ad-8dc8-4c0c-bf48-a9f88c9a9ec6

Part of ISBN: 978-3-9816876-4-4
Contributors: Patrick Werkman; Marcel Klaas Welleweerd; Gerjan Wolterink; John Delamare; Remco G.P. Sanders; Gijs J.M. Krijnen; Alexander Dijkshoorn
Source: check_circle
University of Twente Research Information (Pure Portal)