Personal information

physical metallurgy, composites, phase equilibria, modeling, mechanical properties, structure, conductive alloys, foams, bulk metallic glasses, additive manufacturing, digital fabrication
Russia

Activities

Works (47)

The Effects of Zirconium and Yttrium Addition on the Microstructure and Hardness of AlCuMgMn Alloy when Applying In Situ Heating during the Laser Melting Process

Materials
2023-08-04 | Journal article
Contributors: Asmaa M. Khalil; Andrey V. Pozdniakov; Alexey N. Solonin; Tamer S. Mahmoud; Mohammad Alshah; Ahmed O. Mosleh
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Influence of Adding Modifying Elements and Homogenization Annealing on Laser Melting Process of the Modified AlZnMgCu with 4%Si Alloys

Materials
2021-10-17 | Journal article
Contributors: Ahmed O. Mosleh; Asmaa M. Khalil; Irina S. Loginova; Alexey N. Solonin
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Flow Stress Modelling and 3D Processing Maps of Al4.5Zn4.5Mg1Cu0.12Zr Alloy with Different Scandium Contents

Applied Sciences
2021-05-18 | Journal article
Contributors: Maxim G. Khomutov; Andrey V. Pozdniakov; Alexander Yu. Churyumov; Ruslan Yu. Barkov; Alexey N. Solonin; Maria V. Glavatskikh
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Effect of Aluminum, Iron and Chromium Alloying on the Structure and Mechanical Properties of (Ti-Ni)-(Cu-Zr) Crystalline/Amorphous Composite Materials

Metals
2020-07-01 | Journal article
Contributors: Andrey A. Tsarkov; Vladislav Yu. Zadorozhnyy; Alexey N. Solonin; Dmitri V. Louzguine-Luzgin
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Microstructure and mechanical properties of a novel selective laser melted Al–Mg alloy with low Sc content

Materials Research Express
2019-12-04 | Journal article
Part of ISSN: 2053-1591
Contributors: Alexander Churyumov; A V Pozdniakov; A S Prosviryakov; Irina Loginova; D K Daubarayte; D K Ryabov; V A Korolev; A N Solonin; M D Pavlov; S V Valchuk
Source: Self-asserted source
Alexey Solonin

Evaluation of the Microstructure and Mechanical Properties of a New Modified Cast and Laser-Melted AA7075 Alloy

Materials
2019-10-20 | Journal article
Contributors: Asmaa M. Khalil; Irina S. Loginova; Andrey V. Pozdniakov; Ahmed O. Mosleh; Alexey N. Solonin
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Increasing strength of FFF three-dimensional printed parts by influencing on temperature-related parameters of the process

Rapid Prototyping Journal
2019-09-19 | Journal article
Part of ISSN: 1355-2546
Part of ISSN: 1355-2546
Contributors: Vladimir E. Kuznetsov; Alexey N. Solonin; Azamat Tavitov; Oleg Urzhumtsev; Anna Vakulik; Alexey Solonin
Source: Self-asserted source
Alexey Solonin

Desktop Fabrication of Strong Poly (Lactic Acid) Parts: FFF Process Parameters Tuning

2019-06-07 | Other
Contributors: Vladimir Kuznetsov; Azamat Tavitov; Oleg Urzhumtcev; Artem Korotkov; Alexey Solonin; Sergey Solodov
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Design and Fabrication of Strong Parts from Poly (Lactic Acid) with a Desktop 3D Printer: A Case with Interrupted Shell

Polymers
2019-04-30 | Journal article
Contributors: Vladimir E. Kuznetsov; Azamat G. Tavitov; Oleg D. Urzhumtsev; Mikhail V. Mikhalin; Alexey N. Solonin
Source: check_circle
Crossref

Development of Heat-Resistant Aluminum Alloys for Electrical Engineering Purposes Based on the Al – Fe – Si System

Metal Science and Heat Treatment
2018 | Journal article
EID:

2-s2.0-85054656844

Contributors: Loginova, I.S.; Solonin, A.N.; Prosviryakov, A.S.; Pozdnyakov, A.V.; Ryazantseva, M.A.; Churyumov, A.Y.
Source: Self-asserted source
Alexey Solonin via Scopus - Elsevier

The structure and mechanical properties of parts elaborated by direct laser deposition 316L stainless steel powder obtained in various ways

Journal of Physics: Conference Series
2018 | Conference paper
EID:

2-s2.0-85040978317

Contributors: Loginova, I.S.; Solonin, A.N.; Prosviryakov, A.S.; Adisa, S.B.; Khalil, A.M.; Bykovskiy, D.P.; Petrovskiy, V.N.
Source: Self-asserted source
Alexey Solonin via Scopus - Elsevier

Effect of Laser Welding Process Parameters and Filler Metals on the Weldability and the Mechanical Properties of AA7020 Aluminium Alloy

Journal of Manufacturing and Materials Processing
2018-06-01 | Journal article
Contributors: Saheed B. Adisa; Irina Loginova; Asmaa Khalil; Alexey Solonin
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Increasing of Strength of FDM (FFF) 3D Printed Parts by Influencing on Temperature-Related Parameters<strong> </strong>of the Process

2018-04-09 | Other
Contributors: Vladimir E. Kuznetsov; Alexey N. Solonin; Azamat G. Tavitov; Oleg D. Urzhumtsev; Anna H. Vakulik
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Strength of PLA Components Fabricated with Fused Deposition Technology Using a Desktop 3D Printer as a Function of Geometrical Parameters of the Process

Polymers
2018-03 | Journal article
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 3)‎

Increasing of Strength of FDM (FFF) 3D Printed Parts by Influencing on Temperature-Related Parameters of the Process

2018-03-14 | Other
Contributors: Vladimir E. Kuznetsov; Alexey N. Solonin; Azamat G. Tavitov; Oleg D. Urzhumtsev; Anna H. Vakulik
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Strength of PLA Components Fabricated with Fused Deposition Technology Using a Desktop 3D Printer as a Function of Geometrical Parameters of the Process

2018-03-05 | Other
Contributors: Vladimir Kuznetsov; Alexey Solonin; Oleg Urzhumtcev; Azamat Tavitov; Richard Schilling
Source: check_circle
Crossref

Effect of pulse laser welding parameters and filler metal on microstructure and mechanical properties of Al-4.7Mg-0.32Mn-0.21Sc-0.1Zr alloy

Metals
2017 | Journal article
EID:

2-s2.0-85038394858

Contributors: Loginova, I.; Khalil, A.; Pozdniakov, A.; Solonin, A.; Zolotorevskiy, V.
Source: Self-asserted source
Alexey Solonin via Scopus - Elsevier
grade
Preferred source (of 2)‎

Structural evaluation and mechanical properties of AZ31/SiC nano-composite produced by friction stir welding process at various welding speeds

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
2017 | Journal article
EID:

2-s2.0-85036467842

Contributors: Abdollahzadeh, A.; Shokuhfar, A.; Omidvar, H.; Cabrera, J.M.; Solonin, A.; Ostovari, A.; Abbasi, M.
Source: Self-asserted source
Alexey Solonin via Scopus - Elsevier

Microstructure, mechanical properties, and crystallization behavior of Zr-based bulk metallic glasses prepared under a low vacuum

Journal of Alloys and Compounds
2016 | Journal article
EID:

2-s2.0-84942693465

Contributors: Churyumov, A.Y.; Bazlov, A.I.; Tsarkov, A.A.; Solonin, A.N.; Louzguine-Luzgin, D.V.
Source: Self-asserted source
Alexey Solonin via Scopus - Elsevier

Preparation and characterization of hybrid A359/(SiC+Si<inf>3</inf>N<inf>4</inf>) composites synthesized by stir/squeeze casting techniques

Materials Science and Engineering A
2016 | Journal article
EID:

2-s2.0-84980334587

Contributors: Shalaby, E.A.M.; Churyumov, A.Y.; Solonin, A.N.; Lotfy, A.
Source: Self-asserted source
Alexey Solonin via Scopus - Elsevier

Ways of optimization the process of three-dimensional laser cladding using a layer by layer strategy of powder alloying

Proceedings - 2016 International Conference Laser Optics, LO 2016
2016 | Conference paper
EID:

2-s2.0-84987924564

Contributors: Bykovskiy, D.P.; Andreev, A.O.; Mironov, V.D.; Petrovskiy, V.N.; Popkova, I.S.; Solonin, A.N.; Cheverikin, V.V.
Source: Self-asserted source
Alexey Solonin via Scopus - Elsevier

Boron-Containing Steel Structure and Properties at Room and Elevated Temperature

Metallurgist
2015 | Journal article
WOSUID:

WOS:000352742700008

Contributors: Churyumov, A. Yu.; Khomutov, M. G.; Tsar'kov, A. A.; Pozdnyakov, A. V.; Solonin, A. N.; Mukhanov, E. L.
Source: Self-asserted source
Alexey Solonin via ResearcherID
grade
Preferred source (of 2)‎

Hot deformation behaviour and fracture of 10CrMoWNb ferritic-martensitic steel

Materials & Design
2015 | Journal article
WOSUID:

WOS:000351948400005

Contributors: Churyumov, A. Yu.; Khomutov, M. G.; Solonin, A. N.; Pozdniakov, A. V.; Churyumova, T. A.; Minyaylo, B. F.
Source: Self-asserted source
Alexey Solonin via ResearcherID
grade
Preferred source (of 2)‎

Structural changes in liquid Fe and Fe–B alloy on cooling

Journal of Molecular Liquids
2015-09 | Journal article
Contributors: Dmitri V. Louzguine-Luzgin; Konstantinos Georgarakis; Andrey Tsarkov; Alexey Solonin; Veijo Honkimaki; Louis Hennet; Alain R. Yavari
Source: Self-asserted source
Alexey Solonin via Crossref Metadata Search
grade
Preferred source (of 2)‎

Comparative study of the stress flow models for high-boron corrosion-resistant steel based on an Arrhenius-type equation and artificial neural networks

Russian Metallurgy (Metally)
2014 | Journal article
EID:

2-s2.0-84926656409

Contributors: Churyumov, A.Y.; Khomutov, M.G.; Solonin, A.N.; Mukhanov, E.L.; Efimov, V.M.
Source: Self-asserted source
Alexey Solonin via Scopus - Elsevier
grade
Preferred source (of 2)‎

Converting high-boron steel pipe from round to hexagonal cross section

Steel in Translation
2014 | Journal article
EID:

2-s2.0-84923770252

Contributors: Kadach, M.V.; Gamin, Y.V.; Solonin, A.N.; Pozdnyakov, A.V.
Source: Self-asserted source
Alexey Solonin via Scopus - Elsevier
grade
Preferred source (of 2)‎

Study of the structure and mechanical properties of corrosion-resistant steel with a high concentration of boron at elevated temperatures

Physics of Metals and Metallography
2014 | Journal article
WOSUID:

WOS:000340571100011

Contributors: Churyumov, A. Yu.; Khomutov, M. G.; Tsar'kov, A. A.; Pozdnyakov, A. V.; Solonin, A. N.; Efimov, V. M.; Mukhanov, E. L.
Source: Self-asserted source
Alexey Solonin via ResearcherID
grade
Preferred source (of 3)‎

Structure and mechanical properties of Ni-Cu-Ti-Zr composite materials with amorphous phase

Physics of Metals and Metallography
2013 | Journal article
WOSUID:

WOS:000324550200008

Contributors: Churyumov, A. Yu.; Bazlov, A. I.; Solonin, A. N.; Zadorozhnyi, V. Yu.; Xie, G. Q.; Li, S.; Louzguine-Luzgin, D. V.
Source: Self-asserted source
Alexey Solonin via ResearcherID
grade
Preferred source (of 3)‎

A study of softening processes in heating of cold-deformed sheets of low-alloy aluminum alloys

Metal Science and Heat Treatment
2012 | Journal article
EID:

2-s2.0-84866656256

Contributors: Ryazantseva, M.A.; Mikhailovskaya, A.V.; Bychkov, A.S.; Solonin, A.N.; Golovin, I.S.
Source: Self-asserted source
Alexey Solonin via Scopus - Elsevier

A study of softening processes in heating of cold-deformed sheets of low-alloy aluminum alloys

Metal Science and Heat Treatment
2012 | Journal article
EID:

2-s2.0-84867194190

Contributors: Ryazantseva, M.A.; Mikhailovskaya, A.V.; Bychkov, A.S.; Solonin, A.N.; Golovin, I.S.
Source: Self-asserted source
Alexey Solonin via Scopus - Elsevier

A STUDY OF SOFTENING PROCESSES IN HEATING OF COLD-DEFORMED SHEETS OF LOW-ALLOY ALUMINUM ALLOYS

Metal Science and Heat Treatment
2012 | Journal article
WOSUID:

WOS:000314271400010

Contributors: Ryazantseva, M. A.; Mikhailovskaya, A. V.; Bychkov, A. S.; Solonin, A. N.; Golovin, I. S.
Source: Self-asserted source
Alexey Solonin via ResearcherID

Glass-formation and crystallization processes in Ag-Y-Cu alloys

Journal of Non-Crystalline Solids
2012 | Journal article
WOSUID:

WOS:000307028900007

Contributors: Ketov, S. V.; Louzguina-Luzgina, L. V.; Churyumov, A. Yu.; Solonin, A. N.; Miracle, D. B.; Louzguine-Luzgin, D. V.; Inoue, A.
Source: Self-asserted source
Alexey Solonin via ResearcherID
grade
Preferred source (of 2)‎

Phase transformations in Zr-based bulk metallic glass cyclically loaded before plastic yielding

Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing
2012 | Journal article
WOSUID:

WOS:000305918300046

Contributors: Churyumov, A. Yu.; Bazlov, A. I.; Zadorozhnyy, V. Yu.; Solonin, A. N.; Caron, A.; Louzguine-Luzgin, D. V.
Source: Self-asserted source
Alexey Solonin via ResearcherID
grade
Preferred source (of 2)‎

Investigation of recrystallization in an Al-0.3 Mg alloy by the method of internal friction

Physics of Metals and Metallography
2011 | Journal article
WOSUID:

WOS:000298328800011

Contributors: Golovin, I. S.; Mikhailovskaya, A. V.; Ryazantseva, M. A.; Geptin, A. Yu.; Solonin, A. N.
Source: Self-asserted source
Alexey Solonin via ResearcherID
grade
Preferred source (of 3)‎

Modeling for the Structure Evolution of Alloys of the Al-Cu-Mg System during Natural Ageing

Russian Journal of Non-Ferrous Metals
2011 | Journal article
WOSUID:

WOS:000290542100010

Contributors: Solonin, A. N.; Churyumov, A. Yu.; Mikhailovskaya, A. V.; Ryazantseva, M. A.
Source: Self-asserted source
Alexey Solonin via ResearcherID
grade
Preferred source (of 3)‎

Modeling the evolution of the structure and properties of alloys for an Al-Zn-Mg system in ageing

Russian Journal of Non-Ferrous Metals
2010 | Journal article
WOSUID:

WOS:000285975400007

Contributors: Solonin, A. N.; Churyumov, A. Yu.; Mikhailovskaya, A. V.; Ryazantseva, M. A.; Khomutov, M. G.
Source: Self-asserted source
Alexey Solonin via ResearcherID
grade
Preferred source (of 3)‎

Calculation of the yield point of silumins by the characteristics of their structure

Russian Journal of Non-Ferrous Metals
2009 | Journal article
WOSUID:

WOS:000267487600009

Contributors: Solonin, A. N.; Churyumov, A. Yu.; Sharkova, S. A.; Zolotorevskii, V. S.
Source: Self-asserted source
Alexey Solonin via ResearcherID
grade
Preferred source (of 3)‎

Study of work hardening of quenched and naturally aged Al-Mg and Al-Cu alloys

Materials Science and Engineering A
2009 | Journal article
EID:

2-s2.0-58849139137

Contributors: Zolotorevsky, N.Yu.; Solonin, A.N.; Churyumov, A.Yu.; Zolotorevsky, V.S.
Source: Self-asserted source
Alexey Solonin via Scopus - Elsevier
grade
Preferred source (of 2)‎

Simulating the yield strength of cast alloys in the Al-Mg system

Metal Science and Heat Treatment
2007 | Journal article
WOSUID:

WOS:000255585800005

Contributors: Zolotarevskii, V. S.; Zolotarevskii, N. Yu.; Solonin, A. N.; Churyumov, A. Yu.
Source: Self-asserted source
Alexey Solonin via ResearcherID
grade
Preferred source (of 2)‎

Simulation of the flow stress of recrystallized single-phase alloys of the Al-Mg and Al-Cu systems

Russian Journal of Non-Ferrous Metals
2007 | Journal article
EID:

2-s2.0-84879154322

Contributors: Churyumov, A.Y.; Solonin, A.N.; Zolotorevskii, V.S.
Source: Self-asserted source
Alexey Solonin via Scopus - Elsevier
grade
Preferred source (of 2)‎

Use of a physical approach and artificial neural networks for the simulation of the relation between the yield strength of quenched Al-Si alloys and their structural characteristics

Russian Metallurgy (Metally)
2007 | Journal article
EID:

2-s2.0-41549110223

Contributors: Solonin, A.N.; Churyumov, A.Yu.; Malinin, R.Yu.; Zolotorevskii, V.S.
Source: Self-asserted source
Alexey Solonin via Scopus - Elsevier
grade
Preferred source (of 2)‎

Simulation of flow stress in Al-Mg alloys quenched after casting

Russ. J. Non-ferrous Metals
2007-06 | Journal article
Contributors: A. Yu. Churyumov; N. Yu. Zolotorevskii; A. N. Solonin; V. S. Zolotorevskii
Source: Self-asserted source
Alexey Solonin via Crossref Metadata Search

Microstructure and properties of piglets of piston silumins depending on their composition and production technology

Tsvetnye Metally
2005 | Other
EID:

2-s2.0-33244476094

Contributors: Zolotarevsky, V.S.; Belov, V.D.; Solonin, A.N.; Selivanov, A.A.; Trifonenkov, L.P.; Chuvashov, E.G.
Source: Self-asserted source
Alexey Solonin via Scopus - Elsevier

Structure and properties of composite materials based on aluminum which are produced by method of mechanical alloying in the air

Izvestiya Vysshikh Uchebnykh Zavedenij. Tsvetnaya Metallurgiya
2004 | Journal article
EID:

2-s2.0-5644235673

Contributors: Aksenov, A.A.; Solonin, A.N.; Istomin-Kastrovsky, V.V.
Source: Self-asserted source
Alexey Solonin via Scopus - Elsevier

MMC production method using dynamic consolidation of mechanically alloyed aluminum and silicon carbide powders

Materials Science Forum
2002 | Book
EID:

2-s2.0-0036429793

Contributors: Popov, V.A.; Aksenov, A.A.; Ivanov, V.V.; Lesuer, D.R.; Gulbin, V.N.; Kobelev, A.G.; Solonin, A.N.; Paranin, S.N.; Khodos, I.I.; Smirnov, O.M. et al.
Source: Self-asserted source
Alexey Solonin via Scopus - Elsevier

MMC production method using dynamic consolidation of mechanically alloyed aluminum and silicon carbide powders

Aluminum Alloys 2002: Their Physical and Mechanical Properties Pts 1-3
2002 | Book chapter
WOSUID:

WOS:000177030500047

Contributors: Popov, VA; Aksenov, AA; Ivanov, VV; Lesuer, DR; Gulbin, VN; Kobelev, AG; Solonin, AN; Paranin, SN; Khodos, II; Smirnov, OM et al.
Source: Self-asserted source
Alexey Solonin via ResearcherID

Special features of forming structure and properties aluminum alloy mechanically-alloyed by aluminum oxide

Izvestiya Vysshikh Uchebnykh Zavedenij. Tsvetnaya Metallurgiya
2001 | Journal article
EID:

2-s2.0-0035777587

Contributors: Aksenov, A.A.; Solonin, A.N.; Portnoj, V.K.
Source: Self-asserted source
Alexey Solonin via Scopus - Elsevier

Peer review (3 reviews for 2 publications/grants)

Review activity for Journal of alloys and compounds. (2)
Review activity for Manufacturing letters. (1)