Personal information

Activities

Employment (2)

Saudi Arabia Basic Industries (Saudi Arabia): Riyadh, Jubail, SA

2023-03-15 to present | Senior Scientist (Technology & Innovation)
Employment
Source: Self-asserted source
0000-0002-6523-0371

King Fahd University of Petroleum and Minerals: Dhahran 31261, Eastern pronvince, SA

2018-09-20 to present | Post Doctoral Fellow (Center of Research Excellence in Corrosion)
Employment
Source: Self-asserted source
0000-0002-6523-0371

Education and qualifications (3)

King Fahd University of Petroleum and Minerals: Dhahran, Eastern Province, SA

2014-01-20 to 2018-05-20 | PhD (Mechanical Engineering)
Education
Source: Self-asserted source
0000-0002-6523-0371

King Fahd University of Petroleum and Minerals: Dhahran, Eastern Province, SA

2011-09-31 to 2013-09-25 | MSc (Mechanical Engineering)
Education
Source: Self-asserted source
0000-0002-6523-0371

University of Ado-Ekiti (Now Ekiti State University): Ado Ekiti, Ekiti, NG

2002-03-07 to 2007-11-08 | BSc (Mechanical Engineering)
Education
Source: Self-asserted source
0000-0002-6523-0371

Works (33)

Microstructural, thermomechanical and tribological behavior of refractory high-entropy AlxCr0.25Nb0.5Ta0.5Ti1.5 (x = 0.5, 1) alloys

Journal of Materials Research and Technology
2023-09 | Journal article
Contributors: Abbas Saeed Hakeem; Akeem Yusuf Adesina; Abdul Samad Mohammed; Mirza Murtuza Ali Baig; Muhammad Ali Ehsan; Ahmed Al Ghanim; Nasirudeen Ogunlakin; Syed Ali Abbas; Turki Nabieh Mohammad Baroud
Source: check_circle
Crossref

Assessing the Tribological Behavior of Nanoclay-Reinforced Epoxy Coatings Under Dry Sliding and Seawater Lubricated Conditions

Journal of Materials Engineering and Performance
2023-08 | Journal article
Contributors: Abdulhammed K. Hamzat; Akeem Y. Adesina; Tahir Rasheed; Mohammed Abdul Samad
Source: check_circle
Crossref

Influence of Organic Acids and Related Organic Compounds on Corrosion Behavior of Stainless Steel—A Critical Review

Metals
2023-08-17 | Journal article
Contributors: Aqeel Abbas; Akeem Yusuf Adesina; Rami K. Suleiman
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Physical and Chemical Vapour Deposition Coatings

2023-06-30 | Book chapter
Contributors: Akeem Yusuf Adesina; Nasirudeen Ogunlakin
Source: check_circle
Crossref

Influence of Waste Material Additives on the Performance of a Novel Hybrid Sol-Gel Coating on Mild Steel in 3.5% NaCl Medium

Polymers
2023-06-27 | Journal article
Contributors: Rami K. Suleiman; Akeem Y. Adesina; Ogunlakin Nasirudeen Olalekan; Arumugam Madhan Kumar; Fadi A. Al-Badour; Sowrirajan Subbaiah
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Development and analysis of functionally-graded SiAlON composites with computationally designed properties for cutting inserts

Journal of Materials Research and Technology
2023-03 | Journal article
Contributors: Abba A. Abubakar; Syed Sohail Akhtar; Amer D. Alotaibi; Khaled S. Al-Athel; Abbas S. Hakeem; Akeem Yusuf Adesina
Source: check_circle
Crossref

A nanoscale adhesion mechanism of cement-epoxy interface under varying moisture conditions: A molecular dynamics study

Surfaces and Interfaces
2022-12 | Journal article
Contributors: Ashraf A. Bahraq; Mohammed A. Al-Osta; Omar S. Baghabra Al-Amoudi; I.B. Obot; Akeem Y. Adesina; Mohammed Maslehuddin
Source: check_circle
Crossref

Effect of Solutionizing Duration and Temperature on the Electrochemical Corrosion and Pitting Resistance of Cold-Rolled Super Austenitic Stainless Steel

Materials
2022-12-08 | Journal article
Contributors: Akeem Yusuf Adesina; Hani M. Ahmed; Rami K. Suleiman; Syed Fida Hassan
Source: check_circle
Crossref

Influence of Friction Stir Surface Processing on the Corrosion Resistance of Al 6061

Materials
2022-11-16 | Journal article
Contributors: Ibrahim H. Zainelabdeen; Fadi A. Al-Badour; Rami K. Suleiman; Akeem Yusuf Adesina; Necar Merah; Fadi A. Ghaith
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Facile and Green Fabrication of Superhydrophobic Polyacrylonitrile Nonwoven Fabric with Iron Hydroxide Nanoparticles for Efficient Oil/Water Separation

ACS Applied Polymer Materials
2022-11-11 | Journal article
Contributors: Nedal Y. Abu-Thabit; Abdul Kalam Azad; Khaled Mezghani; Abbas S. Hakeem; Qasem A. Drmosh; Sultan Akhtar; Akeem Yusuf Adesina
Source: check_circle
Crossref

Hybrid Polyurethane/Polypyrrole Composite Coatings on Passivated 316L SS for Surface Protective Action against Corrosion in Saline Medium

Corrosion and Materials Degradation
2022-10-31 | Journal article
Contributors: Arumugam Madhan Kumar; Akeem Yusuf Adesina; Jothi Veeramani; Mohammad Mizanur Rahman; J. S. Nirmal Ram
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Impact of Heating Rate on the Tribological and Corrosion Properties of AISI 52100 Bearing Steel Consolidated via Spark Plasma Sintering

Metals and Materials International
2022-09 | Journal article
Contributors: Akeem Yusuf Adesina; Muzafar Hussain; Abbas Saeed Hakeem; Abdul Samad Mohammed; Muhammad Ali Ehsan; Ahmad Sorour
Source: check_circle
Crossref

Tribological Behavior of TiN/TiAlN, CrN/TiAlN, and CrAlN/TiAlN Coatings at Elevated Temperature

Journal of Materials Engineering and Performance
2022-08 | Journal article
Contributors: Akeem Yusuf Adesina
Source: check_circle
Crossref

Anticorrosion Properties of a Novel Hybrid Sol–Gel Coating on Aluminum 3003 Alloy

Polymers
2022-04-28 | Journal article
Contributors: Rami K. Suleiman; Akeem Y. Adesina; Arumugam Madhan Kumar; Mohammad Mizanur Rahman; Fadi A. Al-Badour; Bassam El Ali
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Additive manufacturing of layer of Ti6Al4V alloy: morphology and metallurgical properties

Advances in Materials and Processing Technologies
2022-01-02 | Journal article
Contributors: Omer Keles; G. Abdelmagid; A. Y. Adesina; A. R. Bin Anand; M. Khaled; A. Al-Sharafi; B. S. Yilbas
Source: check_circle
Crossref

Corrosion challenges and prevention in Ethyl Acetate (EA) production and related processes – An overview

Engineering Failure Analysis
2021-09 | Journal article
Contributors: Akeem Y. Adesina; I.B. Obot; Ahmad. A. Sorour; Sibusiso Mtongana; Sekhar B. Mamilla; Abdulaziz A. Almathami
Source: check_circle
Crossref

Thermomechanical and tribological properties of spark plasma sintered bearing steel/cBN(Ni) composites for engineering applications

Journal of Materials Research and Technology
2020-11 | Journal article
Contributors: Akeem Yusuf Adesina; Abbas Saeed Hakeem; Muhammad Umar Azam; Bilal Anjum Ahmed; Almigdad B. Ibrahim; Muhammad Ali Ehsan; Ahmad A. Sorour
Source: check_circle
Crossref

Mechanical, in-vitro corrosion, and tribological characteristics of TiN coating produced by cathodic arc physical vapor deposition on Ti20Nb13Zr alloy for biomedical applications

Thin Solid Films
2020-09 | Journal article
Contributors: M.A. Hussein; Akeem Y. Adesina; A. Madhan Kumar; A.A. Sorour; N. Ankah; N. Al-Aqeeli
Source: check_circle
Crossref

Preparation and characterization of Pectin/Polypyrrole based multifunctional coatings on TiNbZr alloy for orthopaedic applications

Carbohydrate Polymers
2020-08 | Journal article
Contributors: A. Madhan Kumar; Akeem Yusuf Adesina; M.A. Hussein; Saviour A. Umoren; Suresh Ramakrishna; S. Saravanan
Source: check_circle
Crossref

Electrochemical Investigation of the Effect of Process Parameters on the Corrosion Behavior of Aluminum-Cladded Pressure Vessel Steel Using a Friction Stir Diffusion Cladding Process

Metals
2020-05-11 | Journal article
Contributors: Fadi A. Al-Badour; Akeem Y. Adesina; Almigdad B. Ibrahim; Rami K. Suleiman; Neçar Merah; Ahmad A. Sorour
Source: check_circle
Crossref

Comparative Investigation and Characterization of the Scratch and Wear Resistance Behavior of TiN, CrN, AlTiN and AlCrN Cathodic Arc PVD Coatings

Arabian Journal for Science and Engineering
2019-12-22 | Journal article
Contributors: Akeem Yusuf Adesina; Zuhair M. Gasem; Abdul Samad Mohammed
Source: check_circle
Crossref

Characterization and corrosion resistance of ultra-high molecular weight polyethylene composite coatings reinforced with tungsten carbide particles in hydrochloric acid medium

Journal of Polymer Engineering
2019-11-26 | Journal article
Contributors: Akeem Yusuf Adesina; Muhammad Faizan Khan; Muhammad Umar Azam; Mohammed Abdul Samad; Ahmad A. Sorour
Source: check_circle
Crossref

Characterization and Evaluation of Micronized Tire Rubber Asphalt Surface for Improved Hydrophobicity

Journal of Materials in Civil Engineering
2019-10 | Journal article
Contributors: M. A. Dalhat; Akeem Y. Adesina
Source: check_circle
Crossref

Electrochemical evaluation of the corrosion protectiveness and porosity of vacuum annealed CrAlN and TiAlN cathodic arc physical vapor deposited coatings

Materials and Corrosion
2019-09 | Journal article
Contributors: Akeem Yusuf Adesina; Zuhair M. Gasem; A. Madhan Kumar
Source: check_circle
Crossref

In Vitro Corrosion and Bioactivity Performance of Surface-Treated Ti-20Nb-13Zr Alloys for Orthopedic Applications

Coatings
2019-05-27 | Journal article
Contributors: Madhan Kumar Arumugam; Mohamed A. Hussein; Akeem Yusuf Adesina; Nasser Al-Aqeeli
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Tribological Characterization of Micron-/Nano-Sized WC-9%Co Cemented Carbides Prepared by Spark Plasma Sintering at Elevated Temperatures

Materials
2019-03 | Journal article | Author
Contributors: Saleh Al Wohaibi; Abdul Samad Mohammed; Tahar Laoui; Abbas Saeed Hakeem; 0000-0002-6523-0371; Faheemuddin Patel
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎

Electrochemical and electrical resistance behavior of cathodic arc PVD TiN, CrN, AlCrN, and AlTiN coatings in simulated proton exchange membrane fuel cell environment

Materials and Corrosion
2019-02 | Journal article
Contributors: M. Faizan Khan; Akeem Y. Adesina; Zuhair M. Gasem
Source: check_circle
Crossref

Effect of process parameters on microstructural and mechanical properties of friction stir diffusion cladded ASTM A516-70 steel using 5052 Al alloy

Journal of Manufacturing Processes
2018-08 | Journal article
Contributors: Almigdad B. Ibrahim; Fadi A. Al-Badour; Akeem Yusuf Adesina; Nesar Merah
Source: check_circle
Crossref

Corrosion Resistance Behavior of Single-Layer Cathodic Arc PVD Nitride-Base Coatings in 1M HCl and 3.5 pct NaCl Solutions

Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science
2017 | Journal article
EID:

2-s2.0-85008474017

Contributors: Adesina, A.Y.; Gasem, Z.M.; Madhan Kumar, A.
Source: Self-asserted source
0000-0002-6523-0371 via Scopus - Elsevier

Effects of laser welding parameters on the flexural characteristics of laser welded AISI 316L stainless steel plates

Lasers in Engineering
2016 | Journal article
EID:

2-s2.0-84957921994

Contributors: Adesina, A.Y.; Alzaharnah, I.T.; Yilbas, B.S.
Source: Self-asserted source
0000-0002-6523-0371 via Scopus - Elsevier

Effects of Laser Welding Parameters on the Flexural Characteristics of Laser Welded AISI 316L Stainless Steel Plates

Lasers in Engineering
2016 | Journal article
WOSUID:

WOS:000369183900003

Contributors: Adesina, A. Y.; Alzaharnah, I. T.; Yilbas, B. S.
Source: Self-asserted source
0000-0002-6523-0371 via ResearcherID

Microbiologically influenced corrosion (MIC) challenges in unconventional gas fields

NACE - International Corrosion Conference Series
2015 | Book
EID:

2-s2.0-84940496022

Contributors: Adesina, A.Y.; Aliyu, I.K.; Al-Abbas, F.M.
Source: Self-asserted source
0000-0002-6523-0371 via Scopus - Elsevier

Microbiologically Influenced Corrosion (MIC) Challenges in Unconventional Gas Fields

Other
SOURCE-WORK-ID:

0719161509944-2

Contributors: Adesina, Akeem Yusuf; Aliyu, Ismaila Kayode; Ai-Abbas, Faisal M.
Source: Self-asserted source
0000-0002-6523-0371 via ResearcherID

Peer review (14 reviews for 9 publications/grants)

Review activity for Applied surface science advances. (1)
Review activity for Arabian journal for science and engineering. (1)
Review activity for Arabian journal for science and engineering. (1)
Review activity for Corrosion reviews. (1)
Review activity for Journal of applied polymer science. (1)
Review activity for Journal of manufacturing processes. (3)
Review activity for Materials. (2)
Review activity for Metals. (3)
Review activity for Surface and coatings technology. (1)