Personal information

Other IDs

ResearcherID: F-4120-2015
Scopus Author ID: 56673549800

Activities

Collapse all

Employment (9)

King Fahd University of Petroleum and Minerals: Dharan , SA

2022-03-31 to present | Associate professor/ Research Engineer-II (Interdisciplinary Research Center for Advanced Materials)
Employment
Source: Self-asserted source
M. A. Hussein

Kafrelsheikh University Faculty of Engineering: Kafr el-Sheikh, EG

2016-07-31 to present | Assistant professor (Mechanical Engineering)
Employment
Source: Self-asserted source
M. A. Hussein

King Fahd University of Petroleum & Minerals: Dhahran, SA

2021-03-01 to 2022-03-30 | Assistant Professor / Research Engineer-III (Interdisciplinary Research Center for Advanced Materials )
Employment
Source: Self-asserted source
M. A. Hussein

King Fahd University of Petroleum & Minerals: Dhahran, SA

2016-09-01 to 2021-02-28 | Assistant Professor / Research Engineer-III (Center of Research Excellence in Corrosion)
Employment
Source: Self-asserted source
M. A. Hussein

King Fahd University of Petroleum and Minerals: Dhahran, SA

2015-06-01 to 2016-08-30 | Post-Doctoral Fellow (Mechanical Engineering )
Employment
Source: Self-asserted source
M. A. Hussein

Kafrelsheikh University Faculty of Engineering: Kafr el-Sheikh, EG

2009-12-01 to 2016-07-30 | • Assistant lecturer (Mechanical Engineering )
Employment
Source: Self-asserted source
M. A. Hussein

King Fahd University of Petroleum and Minerals: Dhahran, SA

2012-01-23 to 2015-05-30 | Lecturer-B (Mechanical Engineering )
Employment
Source: Self-asserted source
M. A. Hussein

Kafrelsheikh University Faculty of Engineering: Kafr el-Sheikh, EG

2007-01 to 2009-11 | Demonstrator and Research Assistant (Mechanical Engineering)
Employment
Source: Self-asserted source
M. A. Hussein

Tanta University Faculty of Engineering: Tanta, EG

2005-02-01 to 2007-01 | • Demonstrator (Production Engineering and Mechanical Design )
Employment
Source: Self-asserted source
M. A. Hussein

Education and qualifications (3)

Tanta University Faculty of Engineering: Tanta, EG

• B.Sc. (Mechanical Engineering)
Education
Source: Self-asserted source
M. A. Hussein

Tanta University Faculty of Engineering: Tanta, EG

• M.Sc. (Production Engineering and Mechanical Design)
Education
Source: Self-asserted source
M. A. Hussein

King Fahd University of Petroleum and Minerals: Dhahran, SA

2012-01-23 to 2015-05-28 | PhD. (Mechanical Engineering )
Education
Source: Self-asserted source
M. A. Hussein

Works (34)

Influence of sol-gel film on fusion bonded epoxy coatings on carbon steel: Surface, adhesion, mechanical, and corrosion protection characteristics in a saline medium

Journal of the Taiwan Institute of Chemical Engineers
2025-04 | Journal article
DOI: 10.1016/j.jtice.2025.105994
Contributors: A. Madhan Kumar; Rami K. Suleiman; M.A. Hussein; N.O. Ogunlakin
Source: check_circle
Crossref

Effect of High‐Energy Ball Milling and Additives of Ti and Multiwalled Carbon Nanotubes on the Hydrogen Absorption of AM60 Magnesium Alloy

Advanced Engineering Materials
2025-02 | Journal article
DOI: 10.1002/adem.202401926
Contributors: Mohamed A. Hussein; Aqeel Abbas; Mahmoud M. Abdelnaby; Song‐Jeng Huang; Mohamed A. Azeem
Source: check_circle
Crossref

Development of Ti-Zr-Nb-Ta-Ag high entropy alloy for dental implants: In vitro corrosion behavior, antibacterial effect, and surface characteristics

Materials Chemistry and Physics
2025-01 | Journal article
DOI: 10.1016/j.matchemphys.2024.130114
Contributors: M.A. Hussein; A. Madhan Kumar; M.A. Azeem; N. Ankah; S. Saravanan
Source: check_circle
Crossref

Design and Development of Ti–Zr–Nb–Ta–Ag High Entropy Alloy for Bioimplant Applications

Advanced Engineering Materials
2024-05-25 | Journal article
DOI: 10.1002/adem.202400462
Contributors: Mohamed Abdrabou Hussein; Mohammed Abdul Azeem; Arumugam Madhan Kumar; Nestor Ankah
Source: check_circle
Crossref

Microstructural characterization of AM60- TixNby nanocomposite powders processed by high-energy ball milling

Materials Chemistry and Physics
2024-02 | Journal article
DOI: 10.1016/j.matchemphys.2023.128718
Contributors: Aqeel Abbas; M.A. Hussein; Mohamed Javid
Source: check_circle
Crossref

Processing, mechanical, corrosion, and wear behavior of ZnO-reinforced Mg and Mg–Zr matrix composites for bioimplant applications

Materials Chemistry and Physics
2024-02 | Journal article
DOI: 10.1016/j.matchemphys.2024.128884
Contributors: M.A. Azeem; A. Madhan Kumar; Ahmed F. Abdelaal; M.A. Hussein
Source: check_circle
Crossref

Design, processing, and biocorrosion study of Ti–30Nb alloy with low elastic modulus for bioimplant applications

Materials Chemistry and Physics
2023-11 | Journal article
DOI: 10.1016/j.matchemphys.2023.128413
Contributors: M.A. Hussein; A. Madhan Kumar; M.A. Azeem; N. Ankah
Source: check_circle
Crossref

Ti–30Nb–3Ag alloy with improved corrosion resistance and antibacterial properties for orthopedic and dental applications produced by mechanical alloying

Journal of the Mechanical Behavior of Biomedical Materials
2023-06 | Journal article
DOI: 10.1016/j.jmbbm.2023.105851
Contributors: M.A. Hussein; A. Madhan Kumar; M.A. Azeem; A.A. Sorour; S. Saravanan
Source: check_circle
Crossref

Thermal and Cold Spray Coatings

2023-06-30 | Book chapter
DOI: 10.1201/9781003319856-22
Contributors: Mohamed Abdrabou Hussein
Source: check_circle
Crossref

Surface Properties and In Vitro Corrosion Studies of Blasted and Thermally Treated Ti6Al4V Alloy for Bioimplant Applications

Materials
2022-10-29 | Journal article
DOI: 10.3390/ma15217615
Contributors: Mohamed A. Hussein; Baha Y. Demir; Arumugam Madhan Kumar; Ahmed F. Abdelaal
Source: check_circle
Crossref

Insight into Structural Changes and Electrochemical Properties of Spark Plasma Sintered Nanostructured Ferritic and Austenitic Stainless Steels

Nanomaterials
2022-04 | Journal article | Author
DOI: 10.3390/nano12071225
Contributors: Junaid Ahmed; Ihsan ul haq Toor; M. A. Hussein; Nasser Al-Aqeeli; Mirza Murtuza Ali Baig
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎

Processing, Characterization, and In Vitro Corrosion Behavior of Mg-TiB2 Composite for Orthopedic Applications

JOM
2022-03 | Journal article
DOI: 10.1007/s11837-021-05114-x
Contributors: M. A. Hussein; M. A. Azeem; A. Madhan Kumar; M. Ali; A. Alghanim
Source: check_circle
Crossref

Synthesis, Characterization, and Surface Analysis of Near-β Ti20Nb20Zr Alloy Proceeded by Powder Metallurgy for Biomedical Applications

JOM
2022-03 | Journal article
DOI: 10.1007/s11837-021-05113-y
Contributors: M. A. Hussein
Source: check_circle
Crossref

Thermal treatment effect on the surface and in vitro corrosion characteristics of arc deposited TiN coating on Ti alloy for orthopedic applications

Ceramics International
2021-08 | Journal article
DOI: 10.1016/j.ceramint.2021.05.032
Contributors: M.A. Hussein; A. Madhan Kumar; N. Ankah; Mohamed Abdul Azeem
Source: check_circle
Crossref

Mechanical, in-vitro corrosion, and tribological characteristics of TiN coating produced by cathodic arc physical vapor deposition on Ti20Nb13Zr alloy for biomedical applications

Thin Solid Films
2020-09 | Journal article
DOI: 10.1016/j.tsf.2020.138183
Contributors: M.A. Hussein; Akeem Y. Adesina; A. Madhan Kumar; A.A. Sorour; N. Ankah; N. Al-Aqeeli
Source: check_circle
Crossref

Preparation and characterization of Pectin/Polypyrrole based multifunctional coatings on TiNbZr alloy for orthopaedic applications

Carbohydrate Polymers
2020-08 | Journal article
DOI: 10.1016/j.carbpol.2020.116285
Contributors: A. Madhan Kumar; Akeem Yusuf Adesina; M.A. Hussein; Saviour A. Umoren; Suresh Ramakrishna; S. Saravanan
Source: check_circle
Crossref

Porous Al2O3-CNT Nanocomposite Membrane Produced by Spark Plasma Sintering with Tailored Microstructure and Properties for Water Treatment

Nanomaterials
2020-04-28 | Journal article
DOI: 10.3390/nano10050845
Contributors: Mohamed Abdrabou Hussein; Hafiz Khurram Shahzad; Faheemuddin Patel; Muataz Ali Atieh; Nasser Al-Aqeeli; Turki Nabieh Baroud; Tahar Laoui
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Optimization of Spark Plasma Sintering Parameters Using the Taguchi Method for Developing Mg-Based Composites

JOM
2020-03-14 | Journal article
DOI: 10.1007/s11837-019-03997-5
Contributors: Murad Ali; M. A. Hussein; N. Al-Aqeeli
Source: check_circle
Crossref

Preliminary investigation on the bio-tribocorrosion behavior of porous nanostructured β-type titanium based biomedical alloys

Materials Letters
2019-12 | Journal article
DOI: 10.1016/j.matlet.2019.126755
Contributors: Mamoun Fellah; Naouel Hezil; Mohamed A. Hussein; Mohammed Abdul Samad; Mohamed Zine Touhami; Alex Montagne; Alain Iost; Aleksei Obrosov; Sabine Weiss
Source: check_circle
Crossref

Tribological and Electrochemical Characterization of UHMWPE Hybrid Nanocomposite Coating for Biomedical Applications

Materials
2019-11-07 | Journal article
DOI: 10.3390/ma12223665
Contributors: Zahid Ahmed Baduruthamal; Abdul Samad Mohammed; A. Madhan Kumar; Mohamed A. Hussein; Naser Al-Aqeeli
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Magnesium-based composites and alloys for medical applications: A review of mechanical and corrosion properties

Journal of Alloys and Compounds
2019-07 | Journal article
DOI: 10.1016/j.jallcom.2019.04.080
Contributors: Murad Ali; M.A. Hussein; N. Al-Aqeeli
Source: check_circle
Crossref

In Vitro Corrosion and Bioactivity Performance of Surface-Treated Ti-20Nb-13Zr Alloys for Orthopedic Applications

Coatings
2019-05-27 | Journal article
DOI: 10.3390/coatings9050344
Contributors: Madhan Kumar Arumugam; Mohamed A. Hussein; Akeem Yusuf Adesina; Nasser Al-Aqeeli
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Influence of Thermal Treatment on the Microstructure, Mechanical Properties, and Corrosion Resistance of Newly Developed Ti20Nb13Zr Biomedical Alloy in a Simulated Body Environment

Journal of Materials Engineering and Performance
2019-03-12 | Journal article
DOI: 10.1007/s11665-019-03908-4
Contributors: M. A. Hussein; M. Azeem; A. Madhan Kumar; N. Al-Aqeeli; N. K. Ankah; A. A. Sorour
Source: check_circle
Crossref

Recent Advances in the Processing and Properties of Alumina–CNT/SiC Nanocomposites

Nanomaterials
2019-01 | Journal article | Author
DOI: 10.3390/nano9010086
Contributors: Ibrahim Momohjimoh; M. A. Hussein; Nasser Al-Aqeeli
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎

Electrochemical Corrosion and In Vitro Bioactivity of Nano-Grained Biomedical Ti-20Nb-13Zr Alloy in a Simulated Body Fluid

Materials
2017-12 | Journal article
DOI: 10.3390/ma11010026
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎

Surface Modification of Metallic Biomaterials for Better Tribological Properties

Arabian Journal for Science and Engineering
2017-06 | Journal article
Source: Self-asserted source
M. A. Hussein

Optimization of process parameters for spark plasma sintering of nano-structured ferritic Fe-18Cr-2Si alloy

Powder Technology
2016-10 | Journal article
Source: Self-asserted source
M. A. Hussein

Phase evolution studies during mechanical alloying of Fe(82−x)-Cr18-Six (x = 0, 1, 2, 3) alloy

Journal of Alloys and Compounds
2016-10 | Journal article
Source: Self-asserted source
M. A. Hussein

Phase evolution during high energy ball milling of immiscible Nb-Zr alloys

Advanced Powder Technology
2015 | Journal article
DOI: 10.1016/j.apt.2014.11.008
EID:

2-s2.0-84927575939
Contributors: Al-Aqeeli, N.; Hussein, M.A.; Suryanarayana, C.
Source: Self-asserted source
M. A. Hussein via Scopus - Elsevier

Wear characteristics of metallic biomaterials: A review

Materials
2015 | Journal article
DOI: 10.3390/ma8052749
EID:

2-s2.0-84930650818
Contributors: Hussein, M.A.; Mohammed, A.S.; Al-Aqeeli, N.
Source: Self-asserted source
M. A. Hussein via Scopus - Elsevier

Fabrication of nano-grained Ti–Nb–Zr biomaterials using spark plasma sintering

Materials & Design
2015-12-01 | Journal article
DOI: 10.1016/j.matdes.2015.08.082
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Effect of Sintering Parameters on Microstructure, Mechanical properties and Electrochemical Behavior of Nb-Zr Alloy for Biomedical Applications

Materials & Design
2015-10-15 | Journal article
DOI: 10.1016/j.matdes.2015.06.003
Source: Self-asserted source
M. A. Hussein
grade
Preferred source (of 2)‎

Electrochemical investigation of the effect of different laser surface treatments on Hastelloy G alloy

International Journal of Materials Research
2013 | Journal article
DOI: 10.3139/146.110947
EID:

2-s2.0-84893572158
Contributors: Toor, I.H.; Yilbas, B.S.; Karatas, C.; Hussein, M.A.; Zafar, M.N.
Source: Self-asserted source
M. A. Hussein via Scopus - Elsevier

Formation of an amorphous phase and its crystallization in the immiscible Nb-Zr system by mechanical alloying

Journal of Applied Physics
2013 | Journal article
DOI: 10.1063/1.4825325
EID:

2-s2.0-84886490494
Contributors: Al-Aqeeli, N.; Suryanarayana, C.; Hussein, M.A.
Source: Self-asserted source
M. A. Hussein via Scopus - Elsevier

Peer review (1 review for 1 publication/grant)

Review activity for Metals and Materials International. (1)
How many people are using ORCID?