Personal information

No personal information available

Activities

Collapse all

Employment (1)

Tallinn University of Technology: Tallinn, EE

2019-03 to present | Researcher (Department of Electrical Power Engineering and Mechatronics)
Employment
Source: Self-asserted source
Hans Tiismus

Works (20)

State-of-the-Art Review of Emerging Trends in Renewable Energy Generation Technologies

IEEE Access
2025 | Journal article
DOI: 10.1109/ACCESS.2025.3528640
Contributors: Hans Tiismus; Vahur Maask; Victor Astapov; Tarmo Korõtko; Argo Rosin
Source: check_circle
Crossref

Design of an additively manufactured thermal solution for an axial flux switched reluctance motor

Case Studies in Thermal Engineering
2025-02 | Journal article
DOI: 10.1016/j.csite.2025.105805
Contributors: Martin Sarap; Shalini Singh; Ants Kallaste; Ahmed Qureshi; Hans Tiismus; Toomas Vaimann; Payam Shams Ghahfarokhi
Source: check_circle
Crossref

Electrical and Thermal Anisotropy in Additively Manufactured AlSi10Mg and Fe-Si Samples

Machines
2024-12-24 | Journal article
DOI: 10.3390/machines13010001
Contributors: Martin Sarap; Hans Tiismus; Ants Kallaste; Mart Saarna; Märt Kolnes; Payam Shams Ghahfarokhi; Toomas Vaimann
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Experimental measurements and numerical modelling of additively manufactured Fe-Si cores

Journal of Magnetism and Magnetic Materials
2024-02 | Journal article
DOI: 10.1016/j.jmmm.2024.171752
Contributors: M. Stella; A. Faba; F. Riganti Fulginei; M. Quercio; R. Scorretti; V. Bertolini; L. Sabino; H. Tiismus; A. Kallaste; E. Cardelli
Source: check_circle
Crossref

Design and Performance of Laser Additively Manufactured Core Induction Motor

IEEE Access
2022 | Journal article
DOI: 10.1109/ACCESS.2022.3173317
Contributors: Hans Tiismus; Ants Kallaste; Muhammad Usman Naseer; Toomas Vaimann; Anton Rassolkin
Source: check_circle
Crossref

State of the art of additively manufactured electromagnetic materials for topology optimized electrical machines

Additive Manufacturing
2022-07 | Journal article
DOI: 10.1016/j.addma.2022.102778
Part of ISSN: 2214-8604
Contributors: Hans Tiismus; Ants Kallaste; Toomas Vaimann; Anton Rassõlkin
Source: Self-asserted source
Hans Tiismus

Laser Additively Manufactured Magnetic Core Design and Process for Electrical Machine Applications

Energies
2022-05-17 | Journal article
DOI: 10.3390/en15103665
Contributors: Hans Tiismus; Ants Kallaste; Toomas Vaimann; Liina Lind; Indrek Virro; Anton Rassõlkin; Tatjana Dedova
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Utilization of Additive Manufacturing in the Thermal Design of Electrical Machines: A Review

Machines
2022-03-31 | Journal article
DOI: 10.3390/machines10040251
Contributors: Martin Sarap; Ants Kallaste; Payam Shams Ghahfarokhi; Hans Tiismus; Toomas Vaimann
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Opportunities and Challenges of Utilizing Additive Manufacturing Approaches in Thermal Management of Electrical Machines

IEEE Access
2021 | Journal article
DOI: 10.1109/access.2021.3062618
Part of ISSN: 2169-3536
Contributors: Hans Tiismus
Source: Self-asserted source
Hans Tiismus

Determination of Heat Transfer Coefficient from Housing Surface of a Totally Enclosed Fan-Cooled Machine during Passive Cooling

Machines
2021-06-18 | Journal article
DOI: 10.3390/machines9060120
Contributors: Payam Shams Ghahfarokhi; Andrejs Podgornovs; Ants Kallaste; Antonio J. Marques Cardoso; Anouar Belahcen; Toomas Vaimann; Bilal Asad; Hans Tiismus
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Additive Manufacturing and Performance of E-Type Transformer Core

Energies
2021-06-03 | Journal article
DOI: 10.3390/en14113278
Contributors: Hans Tiismus; Ants Kallaste; Anouar Belahcen; Anton Rassolkin; Toomas Vaimann; Payam Shams Ghahfarokhi
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

AC Magnetic Loss Reduction of SLM Processed Fe-Si for Additive Manufacturing of Electrical Machines

Energies
2021-02-24 | Journal article
DOI: 10.3390/en14051241
Contributors: Hans Tiismus; Ants Kallaste; Anouar Belahcen; Marek Tarraste; Toomas Vaimann; Anton Rassõlkin; Bilal Asad; Payam Shams Ghahfarokhi
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Optimization of a 3D-Printed Permanent Magnet Coupling Using Genetic Algorithm and Taguchi Method

Electronics
2021-02-20 | Journal article
DOI: 10.3390/electronics10040494
Contributors: Ekaterina Andriushchenko; Ants Kallaste; Anouar Belahcen; Toomas Vaimann; Anton Rassõlkin; Hamidreza Heidari; Hans Tiismus
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Sliding Mean Value Subtraction-Based DC Drift Correction of B-H Curve for 3D-Printed Magnetic Materials

Energies
2021-01-06 | Journal article
DOI: 10.3390/en14020284
Contributors: Bilal Asad; Hans Tiismus; Toomas Vaimann; Anouar Belahcen; Ants Kallaste; Anton Rassõlkin; Payam Shams Ghafarokhi
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Hysteresis Measurements and Numerical Losses Segregation of Additively Manufactured Silicon Steel for 3D Printing Electrical Machines

Applied Sciences
2020-09-18 | Journal article
DOI: 10.3390/app10186515
Contributors: Hans Tiismus; Ants Kallaste; Anouar Belahcen; Toomas Vaimann; Anton Rassõlkin; Dmitry Lukichev
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Challenges of Additive Manufacturing of Electrical Machines

2019 IEEE 12th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED)
2019-08 | Other
DOI: 10.1109/demped.2019.8864850
Contributors: Hans Tiismus; Ants Kallaste; Anouar Belahcen; Anton Rassolkin; Toomas Vaimann
Source: Self-asserted source
Hans Tiismus via Crossref Metadata Search

Electrical Resistivity of Additively Manufactured Silicon Steel for Electrical Machine Fabrication

2019 Electric Power Quality and Supply Reliability Conference (PQ) & 2019 Symposium on Electrical Engineering and Mechatronics (SEEM)
2019-06 | Other
DOI: 10.1109/pq.2019.8818252
Contributors: Hans Tiismus; Ants Kallaste; Toomas Vaimann; Anton Rassolkin; Anouar Belahcen
Source: Self-asserted source
Hans Tiismus via Crossref Metadata Search

Technologies for Additive Manufacturing of Electrical Machines

2019 20th International Conference of Young Specialists on Micro/Nanotechnologies and Electron Devices (EDM)
2019-06 | Other
DOI: 10.1109/edm.2019.8823462
Contributors: Hans Tiismus; Ants Kallaste; Toomas Vaimann; Anton Rassolkin; Anouar Belahcen
Source: Self-asserted source
Hans Tiismus via Crossref Metadata Search

Preliminary Analysis of Soft Magnetic Material Properties for Additive Manufacturing of Electrical Machines

Key Engineering Materials
2019-04 | Journal article
DOI: 10.4028/www.scientific.net/kem.799.270
Part of ISSN: 1662-9795
Contributors: Hans Tiismus; Ants Kallaste; Anton Rassõlkin; Toomas Vaimann
Source: Self-asserted source
Hans Tiismus via Crossref Metadata Search
grade
Preferred source (of 2)‎

Control Challenges of 3D Printed Switched Reluctance Motor

2019 26th International Workshop on Electric Drives: Improvement in Efficiency of Electric Drives (IWED)
2019-01 | Other
DOI: 10.1109/iwed.2019.8664282
Contributors: Anton Rassolkin; Ants Kallaste; Toomas Vaimann; Hans Tiismus
Source: Self-asserted source
Hans Tiismus via Crossref Metadata Search

Peer review (5 reviews for 2 publications/grants)

Review activity for Additive manufacturing. (2)
Review activity for Journal of magnetism and magnetic materials. (3)
How many people are using ORCID?