Personal information

Other IDs

Scopus Author ID: 36120594100
SciProfiles: 935103

Activities

Collapse all

Employment (1)

Harbin Institute of Technology: Harbin, Heilongjiang, CN

2017-10-01 to present
Employment
Source: Self-asserted source
Chun Li

Education and qualifications (3)

University of Manchester: Manchester, Greater Manchester, GB

2013-09-10 to 2017-09-10 | PhD
Education
Source: Self-asserted source
Chun Li

Harbin Institute of Technology: Harbin, CN

2011-09-01 to 2013-06-15 | Master (School of Materials)
Education
Source: Self-asserted source
Chun Li

Harbin Institute of Technology: Harbin, CN

2007-09-01 to 2011-06-15 | Bachelor (Honors School)
Education
Source: Self-asserted source
Chun Li

Works (33)

Janus Cu/Ti mesh with asymmetric surface wettability fabricated by diffusion bonding

Surfaces and Interfaces
2025-04 | Journal article
DOI: 10.1016/j.surfin.2025.106133
Contributors: Chenghao Zhang; Changlong Tan; Yang Liu; Chun Li; Xiaoqing Si; Zongjing He; HaiFeng Zhang; Jian Cao
Source: check_circle
Crossref

Understanding the effect of holding time on interfacial microstructure evolution and mechanical properties of Ti3AlC2/Zr-4 brazed joints

Journal of Materials Research and Technology
2024-11 | Journal article
DOI: 10.1016/j.jmrt.2024.09.205
Contributors: Bo Yang; Chun Li; Xiaoqing Si; Mingshen Li; Hao Yuan; Hao Jiang; Runjie Wang; Junlei Qi; Jian Cao
Source: check_circle
Crossref

Achieving SiC joints with outstanding high-temperature property via flash brazing using FeCoCrNiCu high-entropy alloy

Journal of the European Ceramic Society
2024-06 | Journal article
DOI: 10.1016/j.jeurceramsoc.2023.12.101
Contributors: Long Zhou; Chun Li; Chenghao Zhang; Mushi Zheng; Xiaoqing Si; Junlei Qi; Jian Cao
Source: check_circle
Crossref

Ultrashort pulse laser welding of alumina ceramic and titanium

Journal of the European Ceramic Society
2024-05 | Journal article
DOI: 10.1016/j.jeurceramsoc.2023.12.047
Contributors: Hao Yuan; Chun Li; Xiaoqing Si; Bo Yang; Mingshen Li; Wenqi Zhao; Dejun Gao; Jian Cao
Source: check_circle
Crossref

Direct welding of diffuse alumina ceramics by ultrashort pulse laser

Journal of the European Ceramic Society
2024-01 | Journal article
DOI: 10.1016/j.jeurceramsoc.2023.08.034
Contributors: Hao Yuan; Chun Li; Bo Yang; Jianwei Gao; Wenqi Zhao; Mingshen Li; Jian Cao
Source: check_circle
Crossref

Understanding the oxidation behavior of TiAl alloy joints brazed using Ti and Ni based filler

Journal of Materials Research and Technology
2024-01 | Journal article
DOI: 10.1016/j.jmrt.2023.12.040
Contributors: Anran Ming; Chun Li; Yongxu Liu; Lei Chen; Chenghao Zhang; Xiaoqing Si; Xiangyu Dai; Junlei Qi; Jian Cao
Source: check_circle
Crossref

Microstructure and wettability of the micro-laminated Ti6Al4V/304 stainless steel composite fabricated by diffusion bonding

Journal of Materials Research and Technology
2023-11 | Journal article
DOI: 10.1016/j.jmrt.2023.10.219
Contributors: Dejun Gao; Chun Li; Chenghao Zhang; Bo Yang; Tong Lin; Lei Chen; Xiaoqing Si; Junlei Qi; Jian Cao
Source: check_circle
Crossref

Templated Synthesis of Diamond Nanopillar Arrays Using Porous Anodic Aluminium Oxide (AAO) Membranes

Nanomaterials
2023-02-27 | Journal article
DOI: 10.3390/nano13050888
Contributors: Chenghao Zhang; Zhichao Liu; Chun Li; Jian Cao; Josephus G. Buijnsters
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Interfacial Microstructure and Mechanical Properties of 1Cr18Ni9Ti/1Cr21Ni5Ti Stainless Steel Joints Brazed with Mn-Based Brazing Filler

Materials
2022-10 | Journal article | Author
DOI: 10.3390/ma15197021
Contributors: Lei Chen; Huize Chen; Weipeng Yang; Qinlian Zhang; Bo Yang; Yazhen Hu; Xiaoqing Si; Tong Lin; Jian Cao; Junlei Qi et al.
Source: check_circle
Multidisciplinary Digital Publishing Institute

Interfacial reaction and brazing behaviour of SiCf/SiC with Cf/C composites using Si-10Zr alloy at high temperatures

Journal of the European Ceramic Society
2021-02 | Journal article
DOI: 10.1016/j.jeurceramsoc.2020.09.057
Contributors: Zongjing He; Chun Li; Bo Yang; Chenghao Zhang; Junlei Qi; Jian Cao
Source: check_circle
Crossref

Single-crystalline silver nanowire arrays directly synthesized onto substrates by template-assisted chemical wetting

Materialia
2020-03 | Journal article
DOI: 10.1016/j.mtla.2019.100529
Contributors: Chenghao Zhang; Chun Li; Xiaoqing Si; Zongjing He; Junlei Qi; Jicai Feng; Jian Cao
Source: check_circle
Crossref

"One-for-All" strategy to design oxygen-deficient triple-shelled MnO<inf>2</inf> and hollow Fe<inf>2</inf>O<inf>3</inf> microcubes for high energy density asymmetric supercapacitors

Dalton Transactions
2019 | Journal article
DOI: 10.1039/c9dt01682a
EID:

2-s2.0-85067468101
Contributors: Jia, H.; Liang, H.; Wang, Z.; Li, C.; Zheng, X.; Cai, Y.; Qi, J.; Cao, J.; Feng, J.; Fei, W.
Source: Self-asserted source
Chun Li via Scopus - Elsevier

Bifunctional Electrocatalysts Based on Mo-Doped NiCoP Nanosheet Arrays for Overall Water Splitting

Nano-Micro Letters
2019 | Journal article
DOI: 10.1007/s40820-019-0289-6
EID:

2-s2.0-85068875186
Contributors: Lin, J.; Yan, Y.; Li, C.; Si, X.; Wang, H.; Qi, J.; Cao, J.; Zhong, Z.; Fei, W.; Feng, J.
Source: Self-asserted source
Chun Li via Scopus - Elsevier

Characterization of hydrogenated niobium interlayer and its application in TiAl/Ti <inf>2</inf> AlNb diffusion bonding

International Journal of Hydrogen Energy
2019 | Journal article
DOI: 10.1016/j.ijhydene.2019.01.133
EID:

2-s2.0-85060950039
Contributors: Wang, Z.; Li, C.; Qi, J.; Feng, J.; Cao, J.
Source: Self-asserted source
Chun Li via Scopus - Elsevier

Defect-Rich Heterogeneous MoS<inf>2</inf>/NiS<inf>2</inf> Nanosheets Electrocatalysts for Efficient Overall Water Splitting

Advanced Science
2019 | Journal article
DOI: 10.1002/advs.201900246
EID:

2-s2.0-85066075172
Contributors: Lin, J.; Wang, P.; Wang, H.; Li, C.; Si, X.; Qi, J.; Cao, J.; Zhong, Z.; Fei, W.; Feng, J.
Source: Self-asserted source
Chun Li via Scopus - Elsevier

Designing oxygen bonding between reduced graphene oxide and multishelled Mn<inf>3</inf>O<inf>4</inf> hollow spheres for enhanced performance of supercapacitors

Journal of Materials Chemistry A
2019 | Journal article
DOI: 10.1039/c8ta11482j
EID:

2-s2.0-85062907330
Contributors: Jia, H.; Wang, Z.; Li, C.; Si, X.; Zheng, X.; Cai, Y.; Lin, J.; Liang, H.; Qi, J.; Cao, J. et al.
Source: Self-asserted source
Chun Li via Scopus - Elsevier

Determination of local residual stress in an air plasma spray thermal barrier coating (APS-TBC) by microscale ring coring using a picosecond laser

Scripta Materialia
2019 | Journal article
DOI: 10.1016/j.scriptamat.2019.03.036
EID:

2-s2.0-85064181710
Contributors: Zhang, X.; Li, C.; Withers, P.J.; Markocsan, N.; Xiao, P.
Source: Self-asserted source
Chun Li via Scopus - Elsevier

Microstructure and mechanical properties of the SiC/Nb joint brazed using AgCuTi+B<inf>4</inf>C composite filler metal

International Journal of Refractory Metals and Hard Materials
2019 | Journal article
DOI: 10.1016/j.ijrmhm.2019.105049
EID:

2-s2.0-85070405652
Contributors: Li, C.; Huang, C.; Chen, L.; Si, X.; Chen, Z.; Qi, J.; Huang, Y.; Feng, J.; Cao, J.
Source: Self-asserted source
Chun Li via Scopus - Elsevier

Mn and S dual-doping of MOF-derived Co<inf>3</inf>O<inf>4</inf> electrode array increases the efficiency of electrocatalytic generation of oxygen

Journal of Colloid and Interface Science
2019 | Journal article
DOI: 10.1016/j.jcis.2019.09.009
EID:

2-s2.0-85071864665
Contributors: Qi, J.; Wang, H.; Lin, J.; Li, C.; Si, X.; Cao, J.; Zhong, Z.; Feng, J.
Source: Self-asserted source
Chun Li via Scopus - Elsevier

Non-destructive measurement of residual stress distribution as a function of depth in sapphire/Ti6Al4V brazing joint via Raman spectra

Ceramics International
2019 | Journal article
DOI: 10.1016/j.ceramint.2018.10.237
EID:

2-s2.0-85055896101
Contributors: Li, C.; Si, X.; Chen, L.; Qi, J.; Liu, Z.; Huang, Y.; Dong, Z.; Feng, J.; Cao, J.
Source: Self-asserted source
Chun Li via Scopus - Elsevier

Oxygen-vacancy-rich nickel-cobalt layered double hydroxide electrode for high-performance supercapacitors

Journal of Colloid and Interface Science
2019 | Journal article
DOI: 10.1016/j.jcis.2019.06.095
EID:

2-s2.0-85068236099
Contributors: Liang, H.; Jia, H.; Lin, T.; Wang, Z.; Li, C.; Chen, S.; Qi, J.; Cao, J.; Fei, W.; Feng, J.
Source: Self-asserted source
Chun Li via Scopus - Elsevier

Residual stress distribution as a function of depth in graphite/copper brazing joints via X-ray diffraction

Journal of Materials Science and Technology
2019 | Journal article
DOI: 10.1016/j.jmst.2019.07.023
EID:

2-s2.0-85070390746
Contributors: Li, C.; Si, X.; Cao, J.; Qi, J.; Dong, Z.; Feng, J.
Source: Self-asserted source
Chun Li via Scopus - Elsevier

Joining of yttria stabilised zirconia to Ti6Al4V alloy using novel CuO nanostructure reinforced Cu foam interlayer

Materials Letters
2019-10 | Journal article
DOI: 10.1016/j.matlet.2019.06.029
Contributors: Chun Li; Lei Chen; Xiaoyang Wang; Xiangyu Dai; Xiaoqing Si; Junlei Qi; Yongxian Huang; Jicai Feng; Jian Cao
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Understanding the Effect of Surface Machining on the YSZ/Ti6Al4V Joint via Image Based Modelling

Scientific Reports
2019-08-19 | Journal article
DOI: 10.1038/s41598-019-48547-w
Contributors: Chun Li; Xiaoqing Si; Xiangyu Dai; Xun Zhang; Ying Chen; Junlei Qi; Zhibo Dong; Jicai Feng; Jian Cao
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Interfacial microstructure and mechanical properties of SiC joints achieved by reactive air brazing using Ag-V2O5 filler

Journal of the European Ceramic Society
2019-07 | Journal article
DOI: 10.1016/j.jeurceramsoc.2019.03.013
Contributors: Zhiquan Wang; Chun Li; Xiaoqing Si; Chenghao Wu; Junlei Qi; Jicai Feng; Jian Cao
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Brazing ZTA ceramic to TC4 alloy using the Cu foam as interlayer

Vacuum
2018 | Journal article
DOI: 10.1016/j.vacuum.2018.05.038
EID:

2-s2.0-85047631327
Contributors: Wang, X.; Li, C.; Si, X.; Qi, J.; Feng, J.; Cao, J.
Source: Self-asserted source
Chun Li via Scopus - Elsevier

Comparison of the oxidation behavior of a zirconium nitride coating in water vapor and air at high temperature

Corrosion Science
2018 | Journal article
DOI: 10.1016/j.corsci.2018.04.015
EID:

2-s2.0-85045713572
Contributors: Gao, Z.; Chen, Y.; Kulczyk-Malecka, J.; Kelly, P.; Zeng, Y.; Zhang, X.; Li, C.; Liu, H.; Rohbeck, N.; Xiao, P.
Source: Self-asserted source
Chun Li via Scopus - Elsevier

Pre-infiltration and brazing behaviors of C<inf>f</inf>/C composites with high temperature Ti–Si eutectic alloy

Carbon
2018 | Journal article
DOI: 10.1016/j.carbon.2018.08.021
EID:

2-s2.0-85053222791
Contributors: He, Z.; Li, C.; Qi, J.; Huang, Y.; Feng, J.; Cao, J.
Source: Self-asserted source
Chun Li via Scopus - Elsevier

Residual stress distribution analysis of heat treated APS TBC using image based modelling

Data in Brief
2017 | Journal article
DOI: https://doi.org/10.1016/j.dib.2017.06.016
Source: Self-asserted source
Chun Li
grade
Preferred source (of 2)‎

Understanding the residual stress distribution through the thickness of atmosphere plasma sprayed (APS) thermal barrier coatings (TBCs) by high energy synchrotron XRD; digital image correlation (DIC) and image based modelling

Acta Materialia
2017 | Journal article
DOI: https://doi.org/10.1016/j.actamat.2017.03.044
Source: Self-asserted source
Chun Li
grade
Preferred source (of 3)‎

Precise strain profile measurement as a function of depth in thermal barrier coatings using high energy synchrotron X-rays

Scripta Materialia
2016 | Journal article
DOI: https://doi.org/10.1016/j.scriptamat.2015.10.032
Source: Self-asserted source
Chun Li

Combustion joining of carbon-carbon composites to TiAl intermetallics using a Ti-Al-C powder composite interlayer

Composites Science and Technology
2015 | Journal article
DOI: 10.1016/j.compscitech.2015.05.001
EID:

2-s2.0-84929331251
Contributors: Cao, J.; Li, C.; Qi, J.; Shi, Y.; Feng, J.
Source: Self-asserted source
Chun Li via Scopus - Elsevier

Microstructure evolution of alumina/alumina joint bonded by boron oxide-alumina nonmetal powder interlayer

International Journal of Applied Ceramic Technology
2015 | Journal article
DOI: 10.1111/ijac.12185
EID:

2-s2.0-84928374577
Contributors: Cao, J.; Li, C.; Song, X.; Feng, J.; Lin, X.
Source: Self-asserted source
Chun Li via Scopus - Elsevier
How many people are using ORCID?