Personal information

Emails & domains

Verified email domains

Websites & social links

ICB laboratory web site
My Publons page

Other IDs

Scopus Author ID: 35754374500
ResearcherID: I-8642-2019
SciProfiles: 807946

Keywords

Powder metallurgy, HIP, SPS, Oxydation, Characterization of materials

Countries

France

Biography

After a master degree in chemistry at the University of Genoa (Italy), I performed a doctoral thesis (2009 - 2012) and a post-doc (January - June 2013) at the University of Burgundy (ICB Laboratory) on high temperature corrosion of metallic materials.
Between September 2013 and August 2015, I was assistant professor at ENSAM (Campus of Cluny).
In September 2015 I joined the ICB Laboratory (University of Burgundy) as associate professor. My research activities focus on the relationship between the microstructure and the durability of materials elaborated from powders by SPS (spark plasma sintering) and HIP (hot isostatic pressing).

Activities

Collapse all

Employment (2)

Université de Bourgogne: Dijon, Bourgogne-Franche-Comté, FR

2015-09-01 to present | Associate professor (Laboratoire ICB)
Employment
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard

Arts et Métiers ParisTech - Centre de Cluny: Cluny, Bourgogne-Franche-Comté, FR

2013-09-01 to 2015-08-31 | Assistant professor
Employment
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard

Education and qualifications (3)

Université de Bourgogne : Dijon, Bourgogne-Franche-Comté, FR

2009 to 2012 | Ph.D. (Laboratoire ICB)
Education
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard

Università degli Studi di Genova: Genova, Liguria, IT

2006 to 2008 | M.Sc. (Chimica e chimica industriale)
Education
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard

Università degli Studi di Genova: Genova, Liguria, IT

2002 to 2006 | B.Sc. (Chimica e chimica industriale)
Education
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard

Professional activities (4)

ICB laboratory Scientific Committee: Dijon, Bourgogne-Franche-Comté, FR

2022-01 to present | Member
Membership
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard

Chemistry department Council - University of Burgundy: Dijon, Bourgogne-Franche-Comté, FR

2021-09 to present | Member
Service
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard

Selection committee for Chemistry of the University of Burgundy : Dijon, Bourgogne-Franche-Comté, FR

2019 to present | Member
Service
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard

UFR (Unit of Formation and Research) Science and Technology Council: Dijon, Bourgogne-Franche-Comté, FR

2018 to present | Member
Service
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard

Funding (6)

OEDIPUS - Développement de matériaux métalliques performants par couplage SPS-PVD

2024-02 to 2027-08 | Grant
Agence Nationale de la Recherche (Paris, FR)
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard

FASTE - Fabrication Additive de SiGe pour la ThermoElectricité

2022 to 2025 | Grant
Agence Nationale de la Recherche (Paris, FR)
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard

THEMPO 2 - Traitements hybrides de substrats métalliques élaborés par voie classique et par métallurgie des poudres

2022 to 2025 | Grant
Conseil régional de Bourgogne-Franche-Comté (Dijon, FR)
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard

COCASSE - Complex concentrated alloys : sintering and assEmbly

2021-10 to 2024-10 | Grant
EUR-EIPHI (COMUE - Université de Bourgogne, FR)
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard

THEMPO - Traitements hybrides de substrats métalliques élaborés par voie classique et par métallurgie des poudres - Projet en partenariat avec ENSAM Cluny.

2020 to 2022 | Grant
Conseil régional de Bourgogne-Franche-Comté - FEDER (Dijon, Bourgogne-Franche-Comté, FR)
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard

SYNOPSIS : Synthesis of niobium silicide based alloys by powder metallurgy route (atomisation and SPS)

2016 to 2020 | Grant
Agence Nationale de la Recherche (Paris, FR)
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard

Works (27)

CALPHAD-aided synthesis and characterization of an Al–Co–Cr–Fe–Ni–W high-entropy alloy prepared by arc melting and spark plasma sintering

Journal of Materials Research and Technology
2025-01 | Journal article
DOI: 10.1016/j.jmrt.2024.12.140
Contributors: L. Fenocchio; A. Saviot; S. Gambaro; S. Le Gallet; F. Valenza; M.R. Ardigo-Besnard; G. Cacciamani
Source: check_circle
Crossref

316L Stainless-Steel Carburizing Close to Eutectic Transformation Using the Spark Plasma Sintering Process

Journal of Materials Engineering and Performance
2024 | Journal article
DOI: 10.1007/S11665-024-09386-7
WOSUID: WOS:001191071200004
Contributors: Pinot, Yoann; Besnard, Aurelien; Ardigo-Besnard, Maria-Rosa; Bussiere, Florian
Source: check_circle
Web of Science Researcher Profile Sync

Phase transformation mechanisms occurring during spark plasma sintering elaboration of new duplex composite stainless steels

Materials Chemistry and Physics
2024-10 | Journal article
DOI: 10.1016/j.matchemphys.2024.129796
Contributors: R. Mvodo Eba; M.R. Ardigo-Besnard; J.-P. Chateau-Cornu; F. Herbst; N. Geoffroy; A. Besnard; C. Vandenabeele; S. Lucas; A. Descamps-Mandine; C. Josse
Source: check_circle
Crossref

Austenitic-to-austenitic-ferritic stainless steel transformation via PVD powder surface functionalization and spark plasma sintering

Materialia
2024-03 | Journal article
DOI: 10.1016/j.mtla.2023.102002
Part of ISSN: 2589-1529
Contributors: M.R. Ardigo-Besnard; A. Besnard; Y. Pinot; F. Bussière; J.-P. Chateau-Cornu; C. Vandenabeele; S. Lucas; N. Watiez; A. Descamps-Mandine; C. Josse et al.
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard

Comparison of thermal diffusion and interfacial reactions for bulk and sputtered titanium on 316L stainless steel

Materials Chemistry and Physics
2023 | Journal article
DOI: 10.1016/J.MATCHEMPHYS.2023.128013
WOSUID: WOS:001054247600001
Contributors: Auger, J. -m.; Cotton, D.; Nouveau, C.; Besnard, A.; Bernard, F.; Ardigo-Besnard, M. -r.; Monchoux, J. -p.; Cours, R.; Marcelot, C.
Source: check_circle
Web of Science Researcher Profile Sync

New model and adjustment protocol for the viscoplastic stage of densification during load assisted sintering: application to hot isostatic pressing of a 316L steel powder

WORLDPM2022
2022 | Conference paper
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard

Effect of Pre-Oxidation on a Ti PVD Coated Ferritic Steel Substrate during High-Temperature Aging

Crystals
2022-12-01 | Journal article
DOI: 10.3390/cryst12121732
Contributors: Maria-Rosa Ardigo-Besnard; Aurélien Besnard; Galy Nkou Bouala; Pascal Boulet; Yoann Pinot; Quentin Ostorero
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Elaboration de revetêments PVD pour limiter la carburation des poudres métalliques pendant le procédé de frittage SPS

Traitements & Matériaux, volume 476, pages 13-17, mai-juin 2022
2022-06 | Magazine article
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard

Impact of pre-oxidation on the reactivity and conductivity in H2–H2O atmosphere of a ferritic stainless steel for high temperature water vapour electrolysis

International Journal of Hydrogen Energy
2022-06 | Journal article
DOI: 10.1016/j.ijhydene.2022.05.161
Part of ISSN: 0360-3199
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard

Development of Ti PVD Films to Limit the Carburization of Metal Powders during SPS Process

Solids
2021-12 | Journal article | Author
DOI: 10.3390/solids2040025
Contributors: Maria-Rosa Ardigo-Besnard; Aurélien Besnard; Mathias Moser; Florian Bussière
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 3)‎

Effect of the microstructure on the tribological properties of HIPed and PTA-welded Fe-based hardfacing alloy

Surface and Coatings Technology
2021-11 | Journal article
DOI: 10.1016/j.surfcoat.2021.127691
Part of ISSN: 0257-8972
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard

Characterization of the Interfacial Zone Between a HIPed Fe-Based Alloy and a Stainless Steel Container

Journal of Materials Engineering and Performance
2020 | Journal article
DOI: 10.1007/s11665-020-04897-5
EID:

2-s2.0-85086600282

Part of ISBN:

15441024 10599495
Contributors: Tellier, A.; Ardigo-Besnard, M.R.; Chateau-Cornu, J.-P.; Chassagnon, R.; Fioriani, J.-M.
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard via Scopus - Elsevier

Curvature radius measurement by optical profiler and determination of the residual stress in thin films

Applied Surface Science
2019 | Journal article
DOI: 10.1016/j.apsusc.2019.05.104
EID:

2-s2.0-85066099772
Contributors: Besnard, A.; Ardigo, M.R.; Imhoff, L.; Jacquet, P.
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard via Scopus - Elsevier

Influence of the process parameters on the microstructure of a hardfacing coating elaborated by hot isostatic pressing

Archives of Metallurgy and Materials
2019 | Journal article
DOI: 10.24425/amm.2019.126215
EID:

2-s2.0-85063738802
Contributors: Tellier, A.; Ardigo-Besnard, M.R.; Chateau-Cornu, J.-P.
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard via Scopus - Elsevier

Effect of spinel and perovskite coatings on the long term oxidation of a ferritic stainless steel in H2/H2O atmosphere

Corrosion Science
2019-03 | Journal article
DOI: 10.1016/j.corsci.2018.12.034
Contributors: M.R. Ardigo-Besnard; I. Popa; S. Chevalier
Source: check_circle
Crossref

Effect of surface finishing on the oxidation behaviour of a ferritic stainless steel

Applied Surface Science
2017 | Journal article
DOI: 10.1016/j.apsusc.2017.03.280
EID:

2-s2.0-85017115709
Contributors: Ardigo-Besnard, M.R.; Popa, I.; Heintz, O.; Chassagnon, R.; Vilasi, M.; Herbst, F.; Girardon, P.; Chevalier, S.
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard via Scopus - Elsevier

Dual atmosphere study of the K41X stainless steel for interconnect application in high temperature water vapour electrolysis

International Journal of Hydrogen Energy
2014 | Journal article
DOI: 10.1016/j.ijhydene.2015.01.116
EID:

2-s2.0-84925262469
Contributors: Ardigo, M.R.; Popa, I.; Combemale, L.; Chevalier, S.; Herbst, F.; Girardon, P.
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard via Scopus - Elsevier

Effect of coatings on long term behaviour of a commercial stainless steel for solid oxide electrolyser cell interconnect application in H<inf>2</inf>/H<inf>2</inf>O atmosphere

International Journal of Hydrogen Energy
2014 | Journal article
DOI: 10.1016/j.ijhydene.2014.07.058
EID:

2-s2.0-84955254355
Contributors: Ardigo, M.R.; Popa, I.; Chevalier, S.; Girardon, P.; Perry, F.; Laucournet, R.; Brevet, A.; Desgranges, C.
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard via Scopus - Elsevier

Stoney formula: Investigation of curvature measurements by optical profilometer

Advanced Materials Research
2014 | Book
DOI: 10.4028/www.scientific.net/AMR.996.361
EID:

2-s2.0-84906536868
Contributors: Ardigo, M.R.; Ahmed, M.; Besnard, A.
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard via Scopus - Elsevier

Coated interconnects development for high temperature water vapour electrolysis: Study in anode atmosphere

International Journal of Hydrogen Energy
2013 | Journal article
DOI: 10.1016/j.ijhydene.2013.10.026
EID:

2-s2.0-84887992603
Contributors: Ardigo, M.R.; Popa, I.; Chevalier, S.; Parry, V.; Galerie, A.; Girardon, P.; Perry, F.; Laucournet, R.; Brevet, A.; Rigal, E.
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard via Scopus - Elsevier

Effect of coatings on a commercial stainless steel for SOEC interconnect application in anode atmosphere

ECS Transactions
2013 | Conference paper
DOI: 10.1149/05701.2301ecst
EID:

2-s2.0-84904967296
Contributors: Ardigo, M.R.; Popa, I.; Chevalier, S.; Parry, V.; Galerie, A.; Girardon, P.; Perry, F.; Laucournet, R.; Brevet, A.
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard via Scopus - Elsevier

Effect of coatings on long term behaviour of a commercial stainless steel for high temperature steam electrolysis interconnect application in H2/H2O atmosphere

EFC 2013 - Proceedings of the 5th European Fuel Cell Piero Lunghi Conference
2013 | Conference paper
EID:

2-s2.0-84926289432
Contributors: Ardigo, M.R.; Popa, I.; Chevalier, S.; Girardon, P.; Perry, F.; Laucournet, R.; Brevet, A.; Desgranges, C.
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard via Scopus - Elsevier

Effect of water vapor on the oxidation mechanisms of a commercial stainless steel for interconnect application in high temperature water vapor electrolysis

Oxidation of Metals
2013 | Journal article
DOI: 10.1007/s11085-012-9338-y
EID:

2-s2.0-84882452542
Contributors: Ardigo, M.R.; Popa, I.; Chevalier, S.; Weber, S.; Heintz, O.; Vilasi, M.
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard via Scopus - Elsevier

Evaluation of a new Cr-free alloy as interconnect material for hydrogen production by high temperature water vapour electrolysis: Study in cathode atmosphere

International Journal of Hydrogen Energy
2012 | Journal article
DOI: 10.1016/j.ijhydene.2012.02.069
EID:

2-s2.0-84860366303
Contributors: Ardigò, M.R.; Popa, I.; Chevalier, S.; Desgranges, C.; Bousquet, R.
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard via Scopus - Elsevier

Optimisation of metallic interconnects for hydrogen production by high temperature water vapour electrolysis

Defect and Diffusion Forum
2012 | Journal article
DOI: 10.4028/www.scientific.net/DDF.323-325.239
EID:

2-s2.0-84860803297
Contributors: Ardigo, M.R.; Parry, V.; Popa, I.; Chevalier, S.; Chandra-Ambhorn, W.; Phakpeetinan, P.; Wouters, Y.
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard via Scopus - Elsevier

Interface reactivity study between La<inf>0.6</inf>Sr<inf>0.4</inf>Co <inf>0.2</inf>Fe<inf>0.8</inf>O<inf>3-δ</inf> (LSCF) cathode material and metallic interconnect for fuel cell

Journal of Power Sources
2011 | Journal article
DOI: 10.1016/j.jpowsour.2010.09.063
EID:

2-s2.0-78649633666
Contributors: Ardigò, M.R.; Perron, A.; Combemale, L.; Heintz, O.; Caboche, G.; Chevalier, S.
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard via Scopus - Elsevier

Compatibility and reactivity between materials in an innovative dual membrane fuel-cell (IDEAL-Cell) design

ECS Transactions
2009 | Conference paper
DOI: 10.1149/1.3205593
EID:

2-s2.0-77649247227
Contributors: Cabochea, G.; Hochepied, J.-F.; Piccardo, P.; Rzybylski, K.P.; Ruckdäschel, R.; Ardigó, M.-R.; Fatome, E.; Chevalier, S.; Perron, A.; Combemale, L. et al.
Source: Self-asserted source
Maria-Rosa Ardigo-Besnard via Scopus - Elsevier

Peer review (74 reviews for 12 publications/grants)

Review activity for Engineering failure analysis. (1)
Review activity for Industrial lubrication and tribology. (2)
Review activity for International journal of hydrogen energy. (6)
Review activity for International journal of hydrogen energy. (28)
Review activity for Journal of materials science. (2)
Review activity for Journal of materials science. (6)
Review activity for Materials & design. (14)
Review activity for Materials letters. (3)
Review activity for Materials letters. (5)
Review activity for Steel research international (2)
Review activity for Surface and coatings technology. (1)
Review activity for Surfaces and interfaces. (4)
How many people are using ORCID?