Personal information

Other IDs

Scopus Author ID: 55190147700

Keywords

Automotive Technology, Applied statistics, Optimization, Machinability, DOE

Countries

Türkiye

Biography

Dr. Harun AKKUS was born Bahçe/Osmaniye/Turkey in 1987. He received his BS degree in 2008, MSc degree in 2010, and PhD degree in 2017 from the Selcuk University. He worked as an academician at Amasya University between 2011-2021. He has been working as an academician at Nigde Omer Halisdemir University since 2021. He is working on automotive technology, machining, applied statistics, optimization.

Activities

Collapse all

Employment (4)

Niğde Ömer Halisdemir Üniversitesi: Niğde, TR: Nigde, TR

2022 to present | Assoc. Prof. (Automotive Technology Program)
Employment
Source: Self-asserted source
Harun AKKUŞ

Niğde Ömer Halisdemir Üniversitesi: Niğde, TR

2021-07-26 to 2022 | Assist. Prof. (Automotive Technology Program)
Employment
Source: Self-asserted source
Harun AKKUŞ

Amasya University: Amasya, TR

2017-08-01 to 2021-07-25 | Assist. Prof. (Automotive Technology Program)
Employment
Source: Self-asserted source
Harun AKKUŞ

Amasya University: Amasya, TR

2011-08-25 to 2017-08-01 | Lecturer (Automotive Technology Program)
Employment
Source: Self-asserted source
Harun AKKUŞ

Education and qualifications (5)

Tokat Gaziosmanpaşa Üniversitesi: Tokat, Tokat, TR

2020 to 2021 | Undergraduate Education (Mechanical Engineering)
Education
Source: Self-asserted source
Harun AKKUŞ

Selçuk University: Konya, Konya, TR

2011-02 to 2017-01 | PhD (Automotive Education)
Education
Source: Self-asserted source
Harun AKKUŞ

Selçuk University: Konya, Konya, TR

2008 to 2010 | Master (Automotive Education)
Education
Source: Self-asserted source
Harun AKKUŞ

Selçuk University: Konya, Konya, TR

2006 to 2008 | Undergraduate Education (Automotive Education)
Education
Source: Self-asserted source
Harun AKKUŞ

Fırat University: Elâzığ, TR

2004 to 2006 | undergraduate education (Automotive Education)
Education
Source: Self-asserted source
Harun AKKUŞ

Works (21)

EXAMINATION OF THE WEAR BEHAVIOR OF CU-BASED BRAKE PADS USED IN HIGH-SPEED TRAINS AND PREDICTION THROUGH STATISTICAL AND NEURAL NETWORK MODELS

Surface Review and Letters
2024-08 | Journal article
DOI: 10.1142/S0218625X24500628
Contributors: ŞERAFETTİN EKİNCİ; İLHAN ASILTÜRK; HARUN AKKUŞ; AKSHIN MAHAMMADZADE
Source: check_circle
Crossref

Investigation of the Durability and Performance of Gears Made of Glass Fiber, Carbon and Bronze-Reinforced Polytetrafluoroethylene Matrix Composite Material

Archives of Metallurgy and Materials
2024-04-11 | Journal article
DOI: 10.24425/amm.2024.147824
Contributors: R. Yakut; H. Düzcükoğlu; H. Akkuş
Source: check_circle
Crossref

A Comprehensive Analysis of Surface Roughness, Vibration, and Acoustic Emissions Based on Machine Learning during Hard Turning of AISI 4140 Steel

Metals
2023-02 | Journal article | Author
DOI: 10.3390/met13020437
Contributors: ilhan asilturk; MUSTAFA KUNTOĞLU; Rüstem Binali; Harun AKKUŞ; Emin Salur
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎

Experimental and statistical investigations of surface roughness, vibration, and energy consumption values of titanium alloy during machining using response surface method and grey relational analysis

Scientia Iranica
2022 | Journal article
DOI: 10.24200/sci.2021.57548.5296
EID:

2-s2.0-85126147252

Part of ISSN: 23453605 10263098
Contributors: Akkuş, H.
Source: Self-asserted source
Harun AKKUŞ via Scopus - Elsevier

Optimization of Cutting Parameters in Turning of Titanium Alloy (Grade 5) by Analysing Surface Roughness, Tool Wear and Energy Consumption

Experimental Techniques
2021 | Journal article
DOI: 10.1007/s40799-021-00525-6
EID:

2-s2.0-85120657897

Part of ISSN: 17471567 07328818
Contributors: Akkuş, H.; Yaka, H.
Source: Self-asserted source
Harun AKKUŞ via Scopus - Elsevier
grade
Preferred source (of 2)‎

Experimental and response surface methodology investigation of cast material obtained by melting and recycling of chips

Celal Bayar Üniversitesi Fen Bilimleri Dergisi
2021-09-27 | Journal article
DOI: 10.18466/cbayarfbe.898972
Contributors: Harun AKKUŞ; Harun YAKA
Source: check_circle
Crossref

AISI 1040 ÇELİĞİNİN İŞLENEBİLİRLİĞİ SIRASINDA OLUŞAN YÜZEY PÜRÜZLÜLÜĞÜ DEĞERLERİNİN FARKLI TAHMİN MODELLERİ İLE ARAŞTIRILMASI

Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi
2021-06-02 | Journal article
DOI: 10.17780/ksujes.845344
Contributors: Harun AKKUŞ
Source: check_circle
Crossref

EXPERIMENTAL INVESTIGATION OF WEAR BEHAVIOR OF BORAX-ADDED MINERAL OIL AT VARIOUS TEMPERATURES

Surface Review and Letters
2021-04 | Journal article
DOI: 10.1142/s0218625x21500104
Part of ISSN: 0218-625X
Part of ISSN: 1793-6667
Source: Self-asserted source
Harun AKKUŞ
grade
Preferred source (of 2)‎

MULTIPLE OPTIMIZATION ANALYSIS OF MRR, SURFACE ROUGHNESS, SOUND İNTENSITY, ENERGY CONSUMPTION, AND VIBRATION VALUES IN MACHINABILITY OF TC4 TITANIUM ALLOY

Surface Review and Letters
2021-04-30 | Journal article
DOI: 10.1142/s0218625x21500724
Part of ISSN: 0218-625X
Part of ISSN: 1793-6667
Source: Self-asserted source
Harun AKKUŞ
grade
Preferred source (of 2)‎

Experimental and statistical investigation of the effect of cutting parameters on surface roughness, vibration and energy consumption in machining of titanium 6Al-4V ELI (grade 5) alloy

Measurement
2021-01 | Journal article
DOI: 10.1016/j.measurement.2020.108465
Part of ISSN: 0263-2241
Source: Self-asserted source
Harun AKKUŞ
grade
Preferred source (of 2)‎

Ti-6Al-4V ve AISI 316 L biyomalzemelerin aşınma davranışlarının bilye disk deney düzeneği ile araştırılması

DÜMF Mühendislik Dergisi
2020-06-15 | Journal article
DOI: 10.24012/dumf.630224
Part of ISSN: 1309-8640
Source: Self-asserted source
Harun AKKUŞ

AISI 1040 çeliğinin tornalanması sonucu oluşan yüzey pürüzlülük değerlerinin RSM ve YSA ile araştırılması

Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi
2020-03-25 | Journal article
DOI: 10.35193/bseufbd.635997
Part of ISSN: 2458-7575
Source: Self-asserted source
Harun AKKUŞ
grade
Preferred source (of 2)‎

Investigation of impact force on aluminium honeycomb structures by finite element analysis

Journal of Sandwich Structures & Materials
2020-01-01 | Journal article
DOI: 10.1177/1099636217733235
Part of ISSN: 1099-6362
Part of ISSN: 1530-7972
Source: Self-asserted source
Harun AKKUŞ
grade
Preferred source (of 2)‎

Experimental and Statistical Investigation of Surface Roughness in Turning of AISI 4140 Steel

Sakarya University Journal of Science
2019-10-01 | Journal article
DOI: 10.16984/saufenbilder.490668
Part of ISSN: 1301-4048
Source: Self-asserted source
Harun AKKUŞ
grade
Preferred source (of 2)‎

Optimising the effect of cutting parameters on the average surface roughness in a turning process with the Taguchi method

Materiali in tehnologije
2018-12-20 | Journal article
DOI: 10.17222/mit.2018.110
Part of ISSN: 1580-2949
Part of ISSN: 1580-3414
Source: Self-asserted source
Harun AKKUŞ
grade
Preferred source (of 2)‎

Statistical analysis of surface roughness in turning process

Pamukkale University Journal of Engineering Sciences
2017 | Journal article
DOI: 10.5505/pajes.2016.01212
Part of ISSN: 1300-7009
Part of ISSN: 2147-5881
Source: Self-asserted source
Harun AKKUŞ

Experimental research and use of finite elements method on mechanical behaviors of honeycomb structures assembled with epoxy-based adhesives reinforced with nanoparticles

Journal of Mechanical Science and Technology
2017-01 | Journal article
DOI: 10.1007/s12206-016-1216-0
Part of ISSN: 1738-494X
Part of ISSN: 1976-3824
Source: Self-asserted source
Harun AKKUŞ
grade
Preferred source (of 2)‎

Alüminyum Bal Peteği Yapılarda Oluşan Eğilme Kuvvetlerinin Çoklu Regresyon İle İncelenmesi - Investigation Of Bending Strength With Multiple Regression In Aluminum Honeycomb Structures

Celal Bayar Üniversitesi Fen Bilimleri Dergisi
2015-12-19 | Journal article
DOI: 10.18466/cbujos.36340
Part of ISSN: 1305-1385
Part of ISSN: 1305-130X
Source: Self-asserted source
Harun AKKUŞ

Prediction Model for Compressive Strength Value of Aluminum Honeycomb Materials Joined with %1 MWCNT Reinforced Epoxy Adhesive

The Journal of Engineering and Fundamentals
2015-06-01 | Journal article
DOI: 10.17530/jef.15.04.2.1
Part of ISSN: 2149-0325
Source: Self-asserted source
Harun AKKUŞ

Predicting surface roughness of AISI 4140 steel in hard turning process through artificial neural network, fuzzy logic and regression models

Scientific Research and Essays
2011 | Journal article
EID:

2-s2.0-79960859825

Part of ISSN: 19922248
Contributors: Akkuş, H.; Asilturk, I.
Source: Self-asserted source
Harun AKKUŞ via Scopus - Elsevier

Determining the effect of cutting parameters on surface roughness in hard turning using the Taguchi method

Measurement
2011-07 | Journal article
DOI: 10.1016/j.measurement.2011.07.003
Part of ISSN: 0263-2241
Source: Self-asserted source
Harun AKKUŞ
grade
Preferred source (of 2)‎

Peer review (8 reviews for 2 publications/grants)

Review activity for Journal of mechanical science and technology. (7)
Review activity for Measurement. (1)
How many people are using ORCID?