Personal information

Biography

Assistant Professor, Mechanical Engineering Department., Arab Academy for Science and Technology (AASTMT), Egypt.

Activities

Employment (2)

Arab Academy for Science Technology and Maritime Transport: Aswan, EG

2021-09-01 to present | Assistant Professor (Mechanical Engineering)
Employment
Source: Self-asserted source
Mohamed Taha

Aswan University: Aswan, Aswan, EG

2014-07-01 to 2021-11-01 (Mechanical Engineering)
Employment
Source: Self-asserted source
Mohamed Taha

Works (23)

Comparative Performance Analysis of Gear Oil Enhanced With Biomass‐Derived Cellulose Nanocrystals and Al2O3 Nanoparticles

International Journal of Polymer Science
2025-01 | Journal article
Contributors: Ahmed Nabhan; Hamouda M. Mousa; Husain Alfadhel; Mohamed R. El-Sharkawy; Hossa F. Al-Shareef; Fatimah A. M. Al-Zahrani; Mohamed Taha; Antonio Caggiano
Source: check_circle
Crossref

Developing Artificial Intelligence Models for Predicting the Tribo-Mechanical Properties of HDPE Nanocomposite Used in Artificial Hip Joints

IEEE Access
2024 | Journal article
Contributors: Ahmed Fouly; Mohamed Taha; Thamer Albahkali; Muhammad Ali Shar; Hany S. Abdo; Ahmed Nabhan
Source: check_circle
Crossref

Utilizing cellulose nanofibers to enhance spent engine oil performance: A sustainable environmental solution

Results in Engineering
2024-09 | Journal article
Contributors: Mohamed Taha; Hamouda M. Mousa; Husain Alfadhel; Emad Abouel Nasr; A.H. Abdelbaky Elbatran; Ahmed Nabhan; Mohamed R. El-Sharkawy
Source: check_circle
Crossref

Fabrication and Characterization of Functionally Graded Nanocomposites: Impact of Graphene and Vanadium Carbide on Aluminum Matrix

ECS Journal of Solid State Science and Technology
2024-05-01 | Journal article
Contributors: Essam B. Moustafa; Mohamed Said; Abdulrahman Aljabri; Mohammed A. Taha; Rasha A. Youness; Hossameldin Hussein
Source: check_circle
Crossref

KGK KAUTSCHUK GUMMI KUNSTSTOFFE 4/23 (KGK Caoutchouc Rubber Plastics 4/23),KGK KAUTSCHUK GUMMI KUNSTSTOFFE 4/23

KGK Kautschuk Gummi Kunststoffe
2023 | Journal article
EID:

2-s2.0-85164524522

Part of ISSN: 09483276
Contributors: Taha, M.; Viktorova, M.; Hentschke, R.; Guo, Y.; Isayev, A.I.
Source: Self-asserted source
Mohamed Taha via Scopus - Elsevier

TEMPO-oxidized Cellulose Nanofibers/ Alginate Nanocomposite as a Promising nanocomposite Material for the Adsorption of Cationic Dyes

Chemistry Africa
2023 | Journal article
EID:

2-s2.0-85151657631

Part of ISSN: 25225766 25225758
Contributors: Abouzeid, R.; Taha, M.; Khiari, R.; Wu, Q.
Source: Self-asserted source
Mohamed Taha via Scopus - Elsevier

Casting light on the tribological properties of paraffin-based HDPE enriched with graphene nano-additives: an experimental investigation

Materials Research Express
2023-12-01 | Journal article
Contributors: Ahmed Nabhan; Ahmed Fouly; Thamer Albahkali; Muhammad Ali Shar; Hany S Abdo; Mohamed Taha
Source: check_circle
Crossref

Engineering of Multifunctional Nanocomposite Membranes for Wastewater Treatment: Oil/Water Separation and Dye Degradation

Membranes
2023-09-25 | Journal article
Contributors: Hamouda M Mousa; Mostafa M. Sayed; Ibrahim M. A. Mohamed; M. S. Abd El-sadek; Emad Abouel Nasr; Mohamed A. Mohamed; Mohamed Taha
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Magnetic and Dielectric Properties of Hybrid Nanocomposites of Biologically Extracted Hydroxyapatite/Hematite/Silicon Dioxide for Potential Use in Bone Replacement Applications

ECS Journal of Solid State Science and Technology
2023-08-01 | Journal article
Contributors: Asma M. Alturki; Ayshah S. Alatawi; Dalia E. Abulyazied; H. M. Abomostafa; G. M. El komy; R. Alamlah; Mohammed A. Taha; Rasha A. Youness
Source: check_circle
Crossref

Role of hybrid nanofiller GNPs/Al2O3 on enhancing the mechanical and tribological performance of HDPE composite

Scientific Reports
2023-08-01 | Journal article
Part of ISSN: 2045-2322
Contributors: Nabhan A.; Mohamed Taha; Ahmed Mohamed Mahmoud Ibrahim; Ameer A. K.
Source: Self-asserted source
Mohamed Taha
grade
Preferred source (of 2)‎

Unveiling the Potential of Rice Straw Nanofiber-Reinforced HDPE for Biomedical Applications: Investigating Mechanical and Tribological Characteristics

Journal of Functional Biomaterials
2023-07-12 | Journal article
Contributors: Mohamed Taha; Ahmed Fouly; Hany S. Abdo; Ibrahim A. Alnaser; Ragab Abouzeid; Ahmed Nabhan
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Effects of hole-inlet velocity on the adiabatic film cooling effectiveness behind crossflow-fed shaped holes

Applied Thermal Engineering
2023-03 | Journal article | Author
Part of ISSN: 1359-4311
Contributors: Mohamed Qenawy; Mohamed Taha; Junfeng Wang; A.H. Abdelbaky Elbatran
Source: Self-asserted source
Mohamed Taha
grade
Preferred source (of 3)‎

Mechanical and Tribological Performance of HDPE Matrix Reinforced by Hybrid Gr/TiO2 NPs for Hip Joint Replacement

Journal of Functional Biomaterials
2023-03-02 | Journal article | Author
Part of ISSN: 2079-4983
Contributors: Ahmed Nabhan; Galal Sherif; Ragab Abouzeid; Mohamed Taha
Source: Self-asserted source
Mohamed Taha
grade
Preferred source (of 4)‎

Influence of Nano-Hybrid Reinforcements on the Improvement Strength, Thermal Expansion and Wear Properties of Cu–SiC–Fly Ash Nanocomposites Prepared by Powder Metallurgy

ECS Journal of Solid State Science and Technology
2023-03-01 | Journal article
Contributors: Mohammed A. Taha; M. M. El-zaidia; Mai Z. Zaki; H. M. Abomostafa
Source: check_circle
Crossref

Filler loading effect of Al2O3/TiO2 nanoparticles on physical and mechanical characteristics of dental base composite (PMMA)

Polymer Testing
2023-01 | Journal article
Part of ISSN: 0142-9418
Contributors: A. Nabhan; Mohamed Taha; Nouby Ghazaly
Source: Self-asserted source
Mohamed Taha
grade
Preferred source (of 2)‎

Dissolution and regeneration of cellulose from N-methylmorpholine N-oxide and fabrication of nanofibrillated cellulose

Biomass Conversion and Biorefinery
2022 | Journal article
EID:

2-s2.0-85131526580

Part of ISSN: 21906823 21906815
Contributors: El-Wakil, N.; Taha, M.; Abouzeid, R.; dufresne, A.
Source: Self-asserted source
Mohamed Taha via Scopus - Elsevier

Effect of Low Content of Al2O3 Nanoparticles on the Mechanical and Tribological Properties of Polymethyl Methacrylate as a Denture Base Material

Egyptian Journal of Chemistry
2022 | Journal article
EID:

2-s2.0-85130534468

Part of ISSN: 23570245 04492285
Contributors: Gallab, M.; Taha, M.; Rashed, A.; Nabhan, A.
Source: Self-asserted source
Mohamed Taha via Scopus - Elsevier

Unsteady adiabatic film cooling effectiveness behind shaped holes

Case Studies in Thermal Engineering
2022 | Journal article
EID:

2-s2.0-85130213778

Part of ISSN: 2214157X
Contributors: Qenawy, M.; Taha, M.; Abdelbaky Elbatran, A.H.
Source: Self-asserted source
Mohamed Taha via Scopus - Elsevier

Tribological Performance for Steel–Steel Contact Interfaces Using Hybrid MWCNTs/Al2O3 Nanoparticles as Oil-Based Additives in Engines

Fluids
2022-11-24 | Journal article
Part of ISSN: 2311-5521
Contributors: Ahmed Nabhan; A. rashed; Mohamed Taha; Ragab Abouzeid; Ahmed Barhoum
Source: Self-asserted source
Mohamed Taha
grade
Preferred source (of 2)‎

Effect of Cross-linking and Compaction on The Different Thermal Parameters of Sodium Meta Phosphate Glass System

Egyptian Journal of Chemistry
2022-09-14 | Journal article
Part of ISSN: 2357-0245
Contributors: Mohamed Taha; Ahmed Nabhan; Asmaa Mahmoud
Source: Self-asserted source
Mohamed Taha

Evaluation of eco-friendly cellulose and lignocellulose nanofibers from rice straw using multiple quality index

Egyptian Journal of Chemistry
2021 | Journal article
EID:

2-s2.0-85112285580

Part of ISSN: 23570245 04492285
Contributors: Taha, M.; Hassan, M.L.; Dewidare, M.; Kamel, M.A.; Ali, W.Y.; Dufresne, A.
Source: Self-asserted source
Mohamed Taha via Scopus - Elsevier

TRIBOLOGICAL BEHAVIOR OF ULTRA-HIGH MOLECULAR WEIGHT POLYETHYLENE NANOCOMPOSITES

Journal of the Egyptian Society of Tribology
2021-04-01 | Journal article
Part of ISSN: 2090-5955
Source: Self-asserted source
Mohamed Taha

Engineering of electrically-conductive poly(ε-caprolactone)/ multi-walled carbon nanotubes composite nanofibers for tissue engineering applications

Ceramics International
2019 | Journal article
EID:

2-s2.0-85065099397

Part of ISSN: 02728842
Contributors: Abdal-hay, A.; Taha, M.; Mousa, H.M.; Bartnikowski, M.; Hassan, M.L.; Dewidar, M.; Ivanovski, S.
Source: Self-asserted source
Mohamed Taha via Scopus - Elsevier

Peer review (5 reviews for 2 publications/grants)

Review activity for Chemistry Africa. (4)
Review activity for Egyptian Journal of Chemistry (1)