Personal information

Other IDs

ResearcherID: B-2533-2019
ResearcherID: AAP-2022-2021

Activities

Collapse all

Employment (1)

Lucian Blaga University of Sibiu: Sibiu, RO

2012-11-01 to present | Lecturer (Industrial Machines and Equipment)
Employment
Source: Self-asserted source
Melania Tera

Education and qualifications (3)

Lucian Blaga University of Sibiu: Sibiu, RO

2009-10-01 to 2012-01-10 | PhD (Industrial Machines and Equipment)
Education
Source: Self-asserted source
Melania Tera

Lucian Blaga University of Sibiu: Sibiu, RO

2007-10-01 to 2009-07-01 | Master in Industrial Engineering (Industrial Machines and Equipment)
Education
Source: Self-asserted source
Melania Tera

Lucian Blaga University of Sibiu: Sibiu, RO

1998-10-01 to 2003-07-01 | Bachelor in Industrial Engineering (Industrial Machines and Equipment)
Education
Source: Self-asserted source
Melania Tera

Works (38)

Mobile Robots—AHP-Based Actuation Solution Selection and Comparison between Mecanum Wheel Drive and Differential Drive with Regard to Dynamic Loads

Machines
2022-10 | Journal article | Author
DOI: 10.3390/machines10100886
Contributors: Sever-Gabriel Racz; Mihai Crenganiș; Radu-Eugen Breaz; Adrian Maroșan; Alexandru Bârsan; Claudia-Emilia Girjob; Cristina Biris; Melania Tera
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎

Integrating Trajectory Planning with Kinematic Analysis and Joint Torques Estimation for an Industrial Robot Used in Incremental Forming Operations

Machines
2022-06-30 | Journal article
DOI: 10.3390/machines10070531
Contributors: Sever-Gabriel Racz; Mihai Crenganiș; Radu-Eugen Breaz; Alexandru Bârsan; Claudia-Emilia Gîrjob; Cristina-Maria Biriș; Melania Tera
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

INDUSTRY 4.0 – HOW TO INTRODUCE ITS CONCEPTS INTO THE TRAINING OF MECHATRONICS ENGINEERS

2021-11 | Conference paper
DOI: 10.21125/iceri.2021.2094
Contributors: Claudiu Damian Petru; Melania Tera; Claudia-Emilia Gîrjob; Cristina-Maria Biriș
Source: check_circle
Crossref

ONLINE TEACHING ACTIVITIES DUE TO COVID-19 - CASE STUDY FOR THE MECHATRONICS STUDY PROGRAMME

2021-11 | Conference paper
DOI: 10.21125/iceri.2021.2098
Contributors: Radu-Eugen Breaz; Sever-Gabriel Racz; Melania Tera; Claudia-Emilia Gîrjob; Cristina-Maria Biriș
Source: check_circle
Crossref

Dynamic Analysis of a 7 DOF Robot Using Fuzzy Logic for Inverse Kinematics Problem

Procedia Computer Science
2019 | Journal article
DOI: 10.1016/J.PROCS.2019.11.288
WOSUID: WOS:000514081500038
Contributors: Crenganis, Mihai; Tera, Melania; Biris, Cristina; Girjob, Claudia
Source: check_circle
Web of Science Researcher Profile Sync

Modular fastening system and tool-holder working unit for incremental forming

MATEC Web of Conferences
2019 | Journal article
DOI: 10.1051/MATECCONF/201929905005
WOSUID: WOS:000568128200054
Contributors: Tera, Melania; Girjob, Claudia-Emilia; Biris, Cristina-Maria; Crenganis, Mihai
Source: check_circle
Web of Science Researcher Profile Sync

Using an Adaptive Network-based Fuzzy Inference System to Estimate the Vertical Force in Single Point Incremental Forming

International Journal of Computers Communications & Control
2019 | Journal article
DOI: 10.15837/IJCCC.2019.1.3489
WOSUID: WOS:000458616200005
Contributors: Racz, S. G.; Breaz, R. E.; Bologa, O.; Tera, M.; Oleksik, V. S.
Source: check_circle
Web of Science Researcher Profile Sync
grade
Preferred source (of 2)‎

Processing strategies for single point incremental forming—a CAM approach

The International Journal of Advanced Manufacturing Technology
2019-01 | Journal article
DOI: 10.1007/s00170-018-03275-9
Part of ISSN: 0268-3768
Contributors: Melania Tera; Radu-Eugen Breaz; Sever-Gabriel Racz; Claudia-Emilia Girjob
Source: Self-asserted source
Melania Tera via Crossref Metadata Search
grade
Preferred source (of 3)‎

ANALYSIS OF GEOGRAPHIC ORIGIN OF ENGINEERING STUDENTS AND THEIR CULTURAL AND ADAPTATION ISSUES AT LUCIAN BLAGA UNIVERSITY IN SIBIU

ICERI2018 Proceedings
2018-11 | Conference paper
DOI: 10.21125/iceri.2018.2388
Part of ISBN: 9788409059485
Contributors: Melania Tera
Source: Self-asserted source
Melania Tera via Crossref Metadata Search
grade
Preferred source (of 2)‎

SETTING UP A NEW MASTER PROGRAM IN THE FIELD OF MECHATRONICS AT LUCIAN BLAGA UNIVERSITY OF SIBIU

ICERI2018 Proceedings
2018-11 | Conference paper
DOI: 10.21125/iceri.2018.2387
Part of ISBN: 9788409059485
Contributors: Radu-Eugen Breaz; Melania Tera
Source: Self-asserted source
Melania Tera via Crossref Metadata Search
grade
Preferred source (of 2)‎

Incremental Forming of Titanium Ti6Al4V Alloy for Cranioplasty Plates—Decision-Making Process and Technological Approaches

Metals
2018-08 | Journal article
DOI: 10.3390/met8080626
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 4)‎

RAISING THE INTEREST OF HIGH SCHOOL GRADUATES FOR MECHATRONICS AND ROBOTICS UNIVERSITY STUDY

EDULEARN18 Proceedings
2018-07 | Conference paper
DOI: 10.21125/edulearn.2018.1513
Part of ISBN: 9788409027095
Contributors: Melania Tera; Radu-Eugen Breaz
Source: Self-asserted source
Melania Tera via Crossref Metadata Search
grade
Preferred source (of 2)‎

STUDENT COMPETITIONS, A USEFUL TOOL FOR ENHANCING SKILLS AND COMPETENCES

EDULEARN18 Proceedings
2018-07 | Conference paper
DOI: 10.21125/edulearn.2018.1505
Part of ISBN: 9788409027095
Contributors: Radu-Eugen Breaz; Melania Tera
Source: Self-asserted source
Melania Tera via Crossref Metadata Search
grade
Preferred source (of 2)‎

Considerations regarding the use of technological equipment for indexed and continuous multi-axes machining

MATEC Web of Conferences
2017 | Journal article
DOI: 10.1051/matecconf/201712108003
Part of ISSN: 2261-236X
Contributors: Radu-Eugen Breaz; Melania Tera; I. Bondrea; C. Simion; M. Inţă
Source: Self-asserted source
Melania Tera via Crossref Metadata Search
grade
Preferred source (of 3)‎

BALANCING THEORETICAL KNOWLEDGE AND PRACTICAL SKILLS IN TEACHING CNC PROGRAMMIMG TO MECHANICAL AND MANUFACTURING ENGINEERS

ICERI2017 Proceedings
2017-11 | Conference paper
DOI: 10.21125/iceri.2017.2191
Part of ISBN: 9788469769577
Contributors: Melania Tera
Source: Self-asserted source
Melania Tera via Crossref Metadata Search
grade
Preferred source (of 3)‎

MAKING MECHATRONICS STUDY PROGRAMME AT "LUCIAN BLAGA" UNIVERSITY OF SIBIU AVAILABLE FOR INTERNATIONAL STUDENTS

Inted2016: 10th International Technology, Education and Development Conference
2016 | Book chapter
WOSUID:

WOS:000402738401086
Contributors: Breaz, R. E.; Racz, G. S.; Tera, M.; Bologa, O.; Biris, C.
Source: Self-asserted source
Melania Tera via ResearcherID
grade
Preferred source (of 2)‎

Model of a CNC Feed Drive for On-Site Tuning of the Controllers for Single Axis Motion

Applied Mechanics and Materials
2016-06 | Journal article
DOI: 10.4028/www.scientific.net/amm.841.133
Part of ISSN: 1662-7482
Contributors: Radu Eugen Breaz; Sever Gabriel Racz; Octavian Bologa; Melania Tera
Source: Self-asserted source
Melania Tera via Crossref Metadata Search

IS ENGINEERING A MALE SPECIFIC PROFESSION AND HOW THIS ISSUE IS ADDRESSED AT LUCIAN BLAGA UNIVERSITY OF SIBIU

INTED2016 Proceedings
2016-03 | Conference paper
DOI: 10.21125/inted.2016.1397
Part of ISBN: 9788460856177
Contributors: Melania Tera; Radu-Eugen Breaz; Gabriel Sever Racz; Claudia Girjob; Anca Lucia Chicea
Source: Self-asserted source
Melania Tera via Crossref Metadata Search
grade
Preferred source (of 3)‎

MAKING MECHATRONICS STUDY PROGRAMME AT “LUCIAN BLAGA” UNIVERSITY OF SIBIU AVAILABLE FOR INTERNATIONAL STUDENTS

INTED2016 Proceedings
2016-03 | Conference paper
DOI: 10.21125/inted.2016.1330
Part of ISBN: 9788460856177
Contributors: Radu-Eugen Breaz; Gabriel Sever Racz; Melania Tera; Octavian Constantin Bologa; Cristina Biriș
Source: Self-asserted source
Melania Tera via Crossref Metadata Search

INCREASING THE QUALITY OF MECHATRONICS STUDY PROGRAMME AT "LUCIAN BLAGA" UNIVERSITY OF SIBIU

Edulearn15: 7th International Conference on Education and New Learning Technologies
2015 | Book chapter
WOSUID:

WOS:000376685705018
Contributors: Chicea, A. L.; Breaz, R. E.; Bologa, O.; Tera, M.
Source: Self-asserted source
Melania Tera via ResearcherID
grade
Preferred source (of 2)‎

THE COMPETENCES REQUIRED FOR MANUFACTURING ENGINEERS TO MANAGE THE INDUSTRIAL IMPLEMENTATION OF THE INCREMENTAL FORMING PROCESS

Inted2015: 9th International Technology, Education and Development Conference
2015 | Book chapter
WOSUID:

WOS:000398586305007
Contributors: Tera, M.
Source: Self-asserted source
Melania Tera via ResearcherID
grade
Preferred source (of 2)‎

THE METAL FORMING RESEARCH CENTRE OF "LUCIAN BLAGA" UNIVERSITY OF SIBIU - CLOSING THE GAP BETWEEN THE HIGHER EDUCATION RESEARCH AND THE INDUSTRY

Inted2015: 9th International Technology, Education and Development Conference
2015 | Book chapter
WOSUID:

WOS:000398586307051
Contributors: Tera, M.; Bologa, O.
Source: Self-asserted source
Melania Tera via ResearcherID
grade
Preferred source (of 2)‎

Environmental Aspects Regarding The Incremental Forming Process

ACTA Universitatis Cibiniensis
2015-09-01 | Journal article
DOI: 10.1515/aucts-2015-0064
Part of ISSN: 1583-7149
Contributors: Melania Tera
Source: Self-asserted source
Melania Tera via Crossref Metadata Search

Developing a Knowledge Base about the Technological Forces within the Asymmetric Incremental Forming Process

Key Engineering Materials
2015-07 | Journal article
DOI: 10.4028/www.scientific.net/kem.651-653.1115
Part of ISSN: 1662-9795
Contributors: Melania Tera; Radu Eugen Breaz; Octavian Bologa; Sever Gabriel Racz
Source: Self-asserted source
Melania Tera via Crossref Metadata Search

TEACHING CAD/CAE/CAM TECHNIQUES FOR CNC PROFILING AND PUNCHING MACHINES AT MASTER LEVEL

Iceri2014: 7th International Conference of Education, Research and Innovation
2014 | Book chapter
WOSUID:

WOS:000367082900068
Contributors: Tirnovean, S.; Breaz, R. E.; Tera, M.; Bologa, O.; Racz, S. G.
Source: Self-asserted source
Melania Tera via ResearcherID
grade
Preferred source (of 2)‎

TRAINING SPECIALISTS ABLE TO IMPLEMENT THE INCREMENTAL FORMING PROCESS AT INDUSTRY LEVEL

Iceri2014: 7th International Conference of Education, Research and Innovation
2014 | Book chapter
WOSUID:

WOS:000367082900070
Contributors: Tera, M.; Racz, G. S.; Tirnovean, S.; Biris, C.; Girjob, C.
Source: Self-asserted source
Melania Tera via ResearcherID
grade
Preferred source (of 2)‎

Contributions Regarding Incremental Forming Process of Bimetallic Sheets

Applied Mechanics and Materials
2014-10 | Journal article
DOI: 10.4028/www.scientific.net/amm.657.178
Part of ISSN: 1662-7482
Contributors: Melania Tera; Octavian Bologa; Radu Eugen Breaz; Sever Gabriel Racz
Source: Self-asserted source
Melania Tera via Crossref Metadata Search
grade
Preferred source (of 3)‎

Theoretical and Experimental Researches Regarding Multilayer Materials Used for Incremental Forming

Applied Mechanics and Materials
2014-06 | Journal article
DOI: 10.4028/www.scientific.net/amm.555.413
Part of ISSN: 1662-7482
Contributors: Melania Tera; Octavian Bologa; Radu Eugen Breaz; Sever Gabriel Racz
Source: Self-asserted source
Melania Tera via Crossref Metadata Search

Computer assisted techniques for the incremental forming technology

2013 IEEE 18th Conference on Emerging Technologies & Factory Automation (ETFA)
2013-09 | Conference paper
DOI: 10.1109/etfa.2013.6648014
Part of ISBN: 9781479908646
Contributors: Radu E. Breaz; Octavian C. Bologa; Melania Tera; Sever G. Racz
Source: Self-asserted source
Melania Tera via Crossref Metadata Search

Determination of Technological Forces in the Incremental Forming Process

Applied Mechanics and Materials
2013-08 | Journal article
DOI: 10.4028/www.scientific.net/amm.371.133
Part of ISSN: 1662-7482
Contributors: Radu Eugen Breaz; Melania Tera; Octavian Bologa; Sever Gabriel Racz
Source: Self-asserted source
Melania Tera via Crossref Metadata Search
grade
Preferred source (of 3)‎

Comparative Study by Numerical Analysis on the Formability of Deep-Drawn Tailor-Welded Blanks

Advanced Materials Research
2012-02 | Journal article
DOI: 10.4028/www.scientific.net/amr.463-464.582
Part of ISSN: 1662-8985
Contributors: Melania Tera; Cristian Deac; Valentin Oleksik; Octavian Bologa; Radu Breaz; Cristina Biris
Source: Self-asserted source
Melania Tera via Crossref Metadata Search
grade
Preferred source (of 3)‎

Low-cost Motion Control Solution for Industrial Manufacturing Systems

2011 9th Ieee International Conference on Industrial Informatics
2011 | Book chapter
WOSUID:

WOS:000298743300044
Contributors: Breaz, R. E.; Bologa, O. C.; Tera, M.; Deac, C.; Ieee,
Source: Self-asserted source
Melania Tera via ResearcherID
grade
Preferred source (of 2)‎

Aspects of Improving the Cost-Performance Ratio for the Manufacturing of Small-Size Cast Parts

IFAC Proceedings Volumes
2010 | Journal article
DOI: 10.3182/20100908-3-pt-3007.00080
Part of ISSN: 1474-6670
Contributors: Cristian Deac; Melania Tera; Cristina Biris; Marius Bibu; Valentin Oleksik
Source: Self-asserted source
Melania Tera via Crossref Metadata Search

Improving the Manufacturing Accuracy of the Profiling Machines

IFAC Proceedings Volumes
2010 | Journal article
DOI: 10.3182/20100908-3-pt-3007.00077
Part of ISSN: 1474-6670
Contributors: Cristina Biriş; Vasile Marinescu; Octavian Bologa; Radu-Eugen Breaz; Cristian Deac; Melania Tera
Source: Self-asserted source
Melania Tera via Crossref Metadata Search

ANALYTICAL APPROACH TO DETERMINING THE OPTIMAL SHAPE OF THE CASTING SPRUE FOR SMALL-SIZE METALLIC PARTS

Annals of Daaam for 2009 & Proceedings of the 20th International Daaam Symposium
2009 | Book chapter
WOSUID:

WOS:000282335600498
Contributors: Deac, C.; Tera, M.; Bibu, M.; Biris, C.
Source: Self-asserted source
Melania Tera via ResearcherID
grade
Preferred source (of 2)‎

STUDY REGARDING THE NUMERICAL SIMULATION OF THE DEEP DRAWING PROCESS FOR TAILOR WELDED BLANKS

Annals of Daaam for 2009 & Proceedings of the 20th International Daaam Symposium
2009 | Book chapter
WOSUID:

WOS:000282335600032
Contributors: Tera, M.; Bologa, O.; Oleksik, V.; Biris, C.
Source: Self-asserted source
Melania Tera via ResearcherID
grade
Preferred source (of 2)‎

ASPECTS OF OPTIMISING THE POSITIONING AND CONTOURING PRECISION OF CNC LASER CUTTING MACHINES

Annals of Daaam for 2008 & Proceedings of the 19th International Daaam Symposium
2008 | Book chapter
WOSUID:

WOS:000262860100050
Contributors: Biris, C.; Deac, C.; Tera, M.
Source: Self-asserted source
Melania Tera via ResearcherID
grade
Preferred source (of 2)‎

ON THE ASSESSMENT OF THE QUALITY OF CASTING NONFERROUS SMALL-SIZE PARTS BY NUMERICAL SIMULATION

Annals of Daaam for 2008 & Proceedings of the 19th International Daaam Symposium
2008 | Book chapter
WOSUID:

WOS:000262860100180
Contributors: Deac, C.; Bibu, M.; Petrescu, V.; Tera, M.; Biris, C.
Source: Self-asserted source
Melania Tera via ResearcherID
grade
Preferred source (of 2)‎

Peer review (42 reviews for 13 publications/grants)

Review activity for Agronomy. (2)
Review activity for Applied sciences. (8)
Review activity for Applied system innovation. (1)
Review activity for Automation. (1)
Review activity for Biomimetics. (1)
Review activity for Crystals. (2)
Review activity for Electronics. (1)
Review activity for Information. (1)
Review activity for Machines. (6)
Review activity for Materials. (2)
Review activity for Micromachines. (2)
Review activity for Processes. (6)
Review activity for Sensors. (9)
How many people are using ORCID?