Personal information

Emails & domains

Verified email domains

Other IDs

SciProfiles: 1830532
Scopus Author ID: 57323955700

Activities

Collapse all

Employment (1)

Universidad Rey Juan Carlos: Móstoles, Comunidad de Madrid, ES

2018-09-01 to present | Profesor Visitante (Matemática Aplicada, Ciencias e Ingeniería de los Materiales y Tecnología Electrónica)
Employment
Source: Self-asserted source
Javier Bedmar Sanz

Education and qualifications (4)

Universidad Rey Juan Carlos: Móstoles, Comunidad de Madrid, ES

2018 to present | PhD in Industrial Technology
Qualification
Source: Self-asserted source
Javier Bedmar Sanz

Danmarks Tekniske Universitet: Lyngby, DK

2021-04-19 to 2021-07-23 | Guest PhD Student (DTU Mekanik)
Qualification
Source: Self-asserted source
Javier Bedmar Sanz

Universidad Rey Juan Carlos: Móstoles, Comunidad de Madrid, ES

2017 to 2018 | Master in Materials Processing Technologies
Qualification
Source: Self-asserted source
Javier Bedmar Sanz

Universidad Rey Juan Carlos: Móstoles, Comunidad de Madrid, ES

2012 to 2017 | Degree in Materials Engineering
Qualification
Source: Self-asserted source
Javier Bedmar Sanz

Works (16)

Investigation of coating weight and steel substrate on the properties of hot-dip galvanized coatings

Surface and Coatings Technology
2025-02 | Journal article
DOI: 10.1016/j.surfcoat.2025.131804
Part of ISSN: 0257-8972
Contributors: A. Chaouki; S.C. Cifuentes; Javier Bedmar Sanz; J. Rams; K. El Maalam; K. Aouadi; S. Naamane; I. Benabdallah; A. El Fatimy; M. Ben Ali
Source: Self-asserted source
Javier Bedmar Sanz

A Review of Additive Manufacturing of Biodegradable Fe and Zn Alloys for Medical Implants Using Laser Powder Bed Fusion (LPBF)

Materials
2024-12-19 | Journal article
DOI: 10.3390/ma17246220
Contributors: Irene Limón; Javier Bedmar; Juan Pablo Fernández-Hernán; Marta Multigner; Belén Torres; Joaquín Rams; Sandra C. Cifuentes
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Microstructure and corrosion behavior of 316L stainless steel lattice and bulk parts manufactured by LPBF using fiber and CO2 lasers

Materials & Design
2024-08 | Journal article
DOI: 10.1016/j.matdes.2024.113214
Contributors: S. García-Rodríguez; J. Bedmar; N. Abu-warda; B. Torres; J. Rams
Source: check_circle
Crossref

LIFELINE ACTIVITY: THE USE OF STUDENT-PREPARED MOCK EXAMS FOR CONCEPT REINFORCEMENT

2024-07 | Conference paper
DOI: 10.21125/edulearn.2024.1031
Contributors: Antonio Vázquez-López; Rocío Calderón-Villajos; Marta Muñoz; Javier Bedmar; Joaquin Artigas-Arnaudas
Source: check_circle
Crossref

USING TECHNOLOGICAL TOOLS TO TEACH ARTS AND DESIGN STUDENTS ABOUT MATERIALS SCIENCE AND MANUFACTURING

2024-07 | Conference paper
DOI: 10.21125/edulearn.2024.1040
Contributors: Javier Bedmar; Joaquin Artigas-Arnaudas; Antonio Vázquez-López; Sandra Carolina Cifuentes; Rocío Calderón-Villajos; Marta Muñoz
Source: check_circle
Crossref

Impact of molten salts composition on the corrosion behavior of NiMoCr and CoNiCrAl coatings on L-PBF 316L stainless steel for CSP plants

Surface and Coatings Technology
2024-04 | Journal article
DOI: 10.1016/j.surfcoat.2024.130744
Part of ISSN: 0257-8972
Contributors: N. Abu-warda; J. Bedmar; S. García-Rodriguez; M.V. Utrilla; B. Torres; J. Rams
Source: Self-asserted source
Javier Bedmar Sanz

Effect of post-processing heat treatments on the high-temperature oxidation of additively manufactured 316L stainless steel

Journal of Materials Research and Technology
2024-03 | Journal article
DOI: 10.1016/j.jmrt.2024.01.270
Contributors: N. Abu-warda; J. Bedmar; S. García-Rodriguez; B. Torres; M.V. Utrilla; J. Rams
Source: check_circle
Crossref

Teaching Design, Arts, and Fashion Students about Plastics and Recycling: The Use of Online and Offline Escape Room Scenarios

Journal of Chemical Education
2024-03-06 | Journal article
DOI: 10.1021/acs.jchemed.3c01283
Part of ISSN: 0021-9584
Part of ISSN: 1938-1328
Contributors: Antonio Vázquez-López; Joaquín Artigas-Arnaudas; Javier Bedmar Sanz
Source: Self-asserted source
Javier Bedmar Sanz

A One-Step Novel Method to Fabricate Multigrade Ti6Al4V/TiN Composites Using Laser Powder Bed Fusion

Coatings
2024-01-09 | Journal article
DOI: 10.3390/coatings14010090
Contributors: Carmen Sánchez de Rojas Candela; Ainhoa Riquelme; Pilar Rodrigo; Victoria Bonache; Javier Bedmar; Belén Torres; Joaquín Rams
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Effects of the heat treatment on the microstructure and corrosion behavior of 316 L stainless steel manufactured by Laser Powder Bed Fusion

Corrosion Science
2022-10 | Journal article
DOI: 10.1016/j.corsci.2022.110777
Part of ISSN: 0010-938X
Contributors: Javier Bedmar Sanz; Sonia García Rodríguez; Marcelo Roldán Blanco; Belén Torres Barreiro; Joaquín Rams Ramos
Source: Self-asserted source
Javier Bedmar Sanz

Influence of the surface state on the corrosion behavior of the 316 L stainless steel manufactured by Laser Powder Bed Fusion

Corrosion Science
2022-07 | Journal article
DOI: 10.1016/j.corsci.2022.110550
Part of ISSN: 0010-938X
Contributors: Javier Bedmar Sanz; Najib Abu-warda Pérez; Sonia García Rodríguez; Belén Torres Barreiro; Joaquín Rams Ramos
Source: Self-asserted source
Javier Bedmar Sanz

Manufacturing of Aluminum Matrix Composites Reinforced with Carbon Fiber Fabrics by High Pressure Die Casting

Materials
2022-05 | Journal article | Author
DOI: 10.3390/ma15093400
Contributors: Javier Bedmar Sanz; Belén Torres; Joaquin Rams
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎

Impact of Remelting in the Microstructure and Corrosion Properties of the Ti6Al4V Fabricated by Selective Laser Melting

Coatings
2022-02-21 | Journal article
DOI: 10.3390/coatings12020284
Part of ISSN: 2079-6412
Source: Self-asserted source
Javier Bedmar Sanz
grade
Preferred source (of 3)‎

Comparison of Different Additive Manufacturing Methods for 316L Stainless Steel

Materials
2021-10 | Journal article | Author
DOI: 10.3390/ma14216504
Contributors: Javier Bedmar Sanz; Ainhoa; P. Rodrigo; Belen Torres; Joaquin Rams
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎

Fabricación de materiales compuestos de aluminio reforzados con fibras de carbono

MATCOMP 2019
2019-07-04 | Conference paper
Source: Self-asserted source
Javier Bedmar Sanz

Fabricación de materiales compuestos reforzados con fibra de carbono mediante inyección de una aleación de aluminio de alta presión

Patent
Source: Self-asserted source
Javier Bedmar Sanz

Peer review (3 reviews for 2 publications/grants)

Review activity for Journal of alloys and compounds. (2)
Review activity for Journal of the Brazilian Society of Mechanical Sciences and Engineering. (1)
How many people are using ORCID?