Personal information

Emails & domains

Verified email domains

Other IDs

Scopus Author ID: 8244563600
SciProfiles: 608634

Countries

Czech Republic

Activities

Collapse all

Employment (4)

VSB - Technical University of Ostrava: Ostrava, CZ

Employment
Source: check_circle
VŠB - Technická univerzita Ostrava

Vysoká škola báňská - Technická Univerzita Ostrava: Ostrava, CZ

2016-02-01 to present | associate professor (Department of Physics)
Employment
Source: Self-asserted source
Irena M. Hlavacova

Institute of Technology and Business: České Budějovice, South Bohemia, CZ

2015-09-01 to 2017-02-28 | associate professor (Department of Informatics and Natural Sciences)
Employment
Source: Self-asserted source
Irena M. Hlavacova

Vysoká škola báňská - Technická univerzita Ostrava: Ostrava, CZ

1997-10-01 to 2015-08-31 | associate professor (Institute of Physics)
Employment
Source: Self-asserted source
Irena M. Hlavacova

Education and qualifications (1)

Faculty of Nuclear Sciences and Physical Engineering: Czech Technical University in Prague: Prague, CZ

1982 | Ing.
Education
Source: Self-asserted source
Irena M. Hlavacova

Works (33)

Effect of thermomechanical post-processing of additively manufactured AISI 316L steel on abrasive water jet wear

Wear
2025-02 | Journal article
DOI: 10.1016/j.wear.2025.205952
Contributors: Libor M. Hlaváč; Radim Kocich; Lenka Kunčická; Irena M. Hlaváčová; Jakub Gřunděl
Source: check_circle
Crossref

Temperature Measurement during Abrasive Water Jet Machining (AWJM)

Materials
2022-10-12 | Journal article
DOI: 10.3390/ma15207082
Contributors: Damian Bańkowski; Piotr Młynarczyk; Irena M. Hlaváčová
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Analyses of Vibration Signals Generated in W. Nr. 1.0038 Steel during Abrasive Water Jet Cutting Aimed to Process Control

Materials
2022-01-04 | Journal article
DOI: 10.3390/ma15010345
Contributors: Martin Tyč; Irena M. Hlaváčová; Pavel Barták
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Monitoring of Abrasive Waterjet Cutting and Drilling

2021 | Book chapter
DOI: 10.1007/978-3-030-53491-2_25
Contributors: Martin Tyč; Irena M. Hlaváčová; Jiří Kozelský
Source: check_circle
Crossref

Influence of Local Temperature Changes on the Material Microstructure in Abrasive Water Jet Machining (AWJM)

Materials
2021-09-18 | Journal article
DOI: 10.3390/ma14185399
Contributors: Sławomir Spadło; Damian Bańkowski; Piotr Młynarczyk; Irena M. Hlaváčová
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

A Short Note about the Impact Action of a Water Jet Stabilized by a Coaxial Air Stream in the Air and Underwater

Materials
2021-09-02 | Journal article
DOI: 10.3390/ma14175015
Contributors: Josef Poláček; Irena Marie Hlaváčová; Martin Tyč
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Abrasive Waterjet (AWJ) Forces—Potential Indicators of Machining Quality

Materials
2021-06-15 | Journal article
DOI: 10.3390/ma14123309
Contributors: Libor M. Hlaváč; Massimiliano P.G. Annoni; Irena M. Hlaváčová; Francesco Arleo; Francesco Viganò; Adam Štefek
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Influence of Steel Structure on Machinability by Abrasive Water Jet

Materials
2020-10 | Journal article | Author
DOI: 10.3390/ma13194424
Contributors: Irena M. Hlavacova; Marek Sadílek; Petra Váňová; Štefan Szumilo; Martin Tyč
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎

Deformation of products cut on AWJ x-y tables and its suppression

IOP Conference Series: Materials Science and Engineering
2018 | Conference paper
DOI: 10.1088/1757-899X/307/1/012015
EID:

2-s2.0-85043281558
Contributors: Hlaváč, L.M.; Hlaváčová, I.M.; Plančár, Š.; Krenický, T.; Geryk, V.
Source: Self-asserted source
Irena M. Hlavacova via Scopus - Elsevier

Shape distortion reduction method for abrasive water jet (AWJ) cutting

Precision Engineering
2018 | Journal article
DOI: 10.1016/j.precisioneng.2018.04.003
EID:

2-s2.0-85045119255
Contributors: Hlaváč, L.M.; Hlaváčová, I.M.; Arleo, F.; Viganò, F.; Annoni, M.P.G.; Geryk, V.
Source: Self-asserted source
Irena M. Hlavacova via Scopus - Elsevier

Abrasives for water-jet cutting of high-strength and thick hard materials

International Journal of Advanced Manufacturing Technology
2017 | Journal article
DOI: 10.1007/s00170-016-9462-y
EID:

2-s2.0-84988602969
Contributors: Hlavacova, I.M.; Geryk, V.
Source: Self-asserted source
Irena M. Hlavacova via Scopus - Elsevier

Derivatives in physics in novel appearance-Several applications for math lectures

16th Conference on Applied Mathematics, APLIMAT 2017 - Proceedings
2017 | Conference paper
EID:

2-s2.0-85035328594
Contributors: Hlaváčová, I.M.
Source: Self-asserted source
Irena M. Hlavacova via Scopus - Elsevier

Precision comparison of analytical and statistical-regression models for AWJ cutting

Precision Engineering
2017 | Journal article
DOI: 10.1016/j.precisioneng.2017.05.002
EID:

2-s2.0-85019122644
Contributors: Hlaváč, L.M.; Krajcarz, D.; Hlaváčová, I.M.; Spadło, S.
Source: Self-asserted source
Irena M. Hlavacova via Scopus - Elsevier

Taper of kerfs made in rocks by abrasive water jet (AWJ)

International Journal of Advanced Manufacturing Technology
2017 | Journal article
DOI: 10.1007/s00170-016-8782-2
EID:

2-s2.0-84964533627
Contributors: Hlaváč, L.M.; Hlaváčová, I.M.; Geryk, V.
Source: Self-asserted source
Irena M. Hlavacova via Scopus - Elsevier

AWJ cutting of copper processed by ECAP

International Journal of Advanced Manufacturing Technology
2016 | Journal article
DOI: 10.1007/s00170-015-8236-2
EID:

2-s2.0-84952055799
Contributors: Hlaváč, L.M.; Kocich, R.; Gembalová, L.; Jonšta, P.; Hlaváčová, I.M.
Source: Self-asserted source
Irena M. Hlavacova via Scopus - Elsevier

Future in marine fire-fighting: High pressure water mist extinguisher with abrasive water jet cutting,Budućnost gašenja požara na brodu: Vatrogasni aparati s pjenom pod visokim pritiskom i s abrazivnim oštrim mlazom

Nase More
2016 | Journal article
DOI: 10.17818/NM/2016/SI5
EID:

2-s2.0-84979671155
Contributors: Hlaváčová, I.M.; Vondra, A.
Source: Self-asserted source
Irena M. Hlavacova via Scopus - Elsevier

Abrasive water-jet technology waste and its processing possibilities

Inzynieria Mineralna
2015 | Journal article
EID:

2-s2.0-85026667989
Contributors: Šupolíková, G.; Černý, J.; Gembalová, L.; Hlaváčová, I.M.
Source: Self-asserted source
Irena M. Hlavacova via Scopus - Elsevier

Improvement of abrasive water jet machining accuracy for titanium and TiNb alloy

International Journal of Advanced Manufacturing Technology
2015 | Journal article
DOI: 10.1007/s00170-015-7132-0
EID:

2-s2.0-84942366665
Contributors: Hlaváč, L.M.; Gembalová, L.; Štěpán, P.; Hlaváčová, I.M.
Source: Self-asserted source
Irena M. Hlavacova via Scopus - Elsevier

Influence traverse speed on surface quality after water-jet cutting for hardox steel

METAL 2015 - 24th International Conference on Metallurgy and Materials, Conference Proceedings
2015 | Conference paper
EID:

2-s2.0-85016485907
Contributors: Hlavac, L.M.; Spadło, S.; Krajcarz, D.; Hlavacova, I.M.
Source: Self-asserted source
Irena M. Hlavacova via Scopus - Elsevier

Investigation of the taper of kerfs cut in steels by AWJ

International Journal of Advanced Manufacturing Technology
2015 | Journal article
DOI: 10.1007/s00170-014-6578-9
EID:

2-s2.0-84939953258
Contributors: Hlaváč, L.M.; Hlaváčová, I.M.; Geryk, V.; Plančár, Š.
Source: Self-asserted source
Irena M. Hlavacova via Scopus - Elsevier

Shutdown pressure drop propagation along the hose-line

International Journal of Heat and Mass Transfer
2014 | Journal article
DOI: 10.1016/j.ijheatmasstransfer.2014.05.026
EID:

2-s2.0-84903435446
Contributors: Hlaváčová, I.M.; Čikovová, M.; Wicher, K.
Source: Self-asserted source
Irena M. Hlavacova via Scopus - Elsevier

High-energy liquid jet technology - Risk assessment in practice

International Journal of Occupational Medicine and Environmental Health
2012 | Journal article
DOI: 10.2478/S13382-012-0053-3
EID:

2-s2.0-84874384045
Contributors: Hlaváčová, I.M.; Mulicka, I.
Source: Self-asserted source
Irena M. Hlavacova via Scopus - Elsevier

Comminution of material particles by water jets - Influence of the inner shape of the mixing chamber

International Journal of Mineral Processing
2010 | Journal article
DOI: 10.1016/j.minpro.2010.03.003
EID:

2-s2.0-77955230335
Contributors: Hlaváč, L.M.; Hlaváčová, I.M.; Jandačka, P.; Zegzulka, J.; Viliamsová, J.; Vašek, J.; Mádr, V.
Source: Self-asserted source
Irena M. Hlavacova via Scopus - Elsevier

Experimental investigation of depth dependent kerf width in abrasive water jet cutting

BHR Group - 20th International Conference on Water Jetting
2010 | Conference paper
EID:

2-s2.0-80051690951
Contributors: Hlaváč, L.M.; Hlaváčová, I.M.; Gembalová, L.; Jonšta, P.
Source: Self-asserted source
Irena M. Hlavacova via Scopus - Elsevier

Investigation of samples from the high-velocity water jet driven micro/nano particle collider

American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP
2010 | Conference paper
DOI: 10.1115/PVP2009-77751
EID:

2-s2.0-77953189973
Contributors: Hlaváč, L.M.; Hlaváčová, I.M.; Vašek, J.; Jandačka, P.; Zegzulka, J.; Viliamsová, J.; Mádr, V.; Uhlář, R.
Source: Self-asserted source
Irena M. Hlavacova via Scopus - Elsevier

Testing of the high-velocity water jetting on concrete samples inside the overpressure vessel

American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP
2010 | Conference paper
DOI: 10.1115/PVP2009-77712
EID:

2-s2.0-77953203053
Contributors: Hlaváč, L.M.; Bodnárová, L.; Mádr, V.; Hela, R.; Kaličinský, J.; Janurová, E.; Pustelník, J.; Hlaváčová, I.M.
Source: Self-asserted source
Irena M. Hlavacova via Scopus - Elsevier

Experimental method for the investigation of the abrasive water jet cutting quality

Journal of Materials Processing Technology
2009 | Journal article
DOI: 10.1016/j.jmatprotec.2009.04.011
EID:

2-s2.0-71749090602
Contributors: Hlaváč, L.M.; Hlaváčová, I.M.; Gembalová, L.; Kaličinský, J.; Fabian, S.; Měšťánek, J.; Kmec, J.; Mádr, V.
Source: Self-asserted source
Irena M. Hlavacova via Scopus - Elsevier

Fracturing of brittle materials in a mixing process with waterjet

17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures
2008 | Conference paper
EID:

2-s2.0-84866127347
Contributors: Hlavac, L.; Vasek, J.; Hlavacova, I.; Jandacka, P.; Madr, V.
Source: Self-asserted source
Irena M. Hlavacova via Scopus - Elsevier

Potential of liquid jets for preparation of micro and nano particles

Green Chemistry and Engineering International Conference on Process Intensification and Nanotechnology
2008 | Conference paper
EID:

2-s2.0-58849147988
Contributors: Hlaváč, L.M.; Vašek, J.; Hlaváčová, I.M.; Jandačka, P.
Source: Self-asserted source
Irena M. Hlavacova via Scopus - Elsevier

Propagation of the abrasive water jet in free air and through material

19th International Conference on Water Jetting
2008 | Conference paper
EID:

2-s2.0-58849101361
Contributors: Hlaváčová, I.M.; Hlaváč, L.M.; Gembalová, L.; Matýsek, D.
Source: Self-asserted source
Irena M. Hlavacova via Scopus - Elsevier

Quality evaluation of the AWJ cutting through the declination angle

19th International Conference on Water Jetting
2008 | Conference paper
EID:

2-s2.0-58849155658
Contributors: Hlaváč, L.M.; Gembalová, L.; Hlaváčová, I.M.; Mádr, V.; Měšt'ánek, J.
Source: Self-asserted source
Irena M. Hlavacova via Scopus - Elsevier

Testing of induced frequencies during submerged use of water jets

18th International Conference on Water Jetting
2006 | Conference paper
EID:

2-s2.0-33750284368
Contributors: Hlaváč, L.M.; Kaličinský, J.; Hlaváčová, I.M.; Mádr, V.
Source: Self-asserted source
Irena M. Hlavacova via Scopus - Elsevier

Testing of self-resonating chambers - Experimental results

17th International Conference on Water Jetting: Advances and Future Needs
2004 | Conference paper
EID:

2-s2.0-15344349808
Contributors: Hlaváč, L.M.; Kušnerová, M.; Mádr, V.; Hlaváčová, I.M.
Source: Self-asserted source
Irena M. Hlavacova via Scopus - Elsevier
How many people are using ORCID?