Personal information

Websites & social links

Producción Científica UCA

Other IDs

Scopus Author ID: 55814200300
ResearcherID: AAA-1700-2022

Activities

Collapse all

Employment (2)

Universidad de Cádiz: Cadiz, Andalucía, ES

2015-01-19 to present | Lecturer (Department of Mechanical Engineering and Industrial Design)
Employment
Source: Self-asserted source
Severo Raúl Fernández Vidal

Universidad de Cádiz: Cadiz, Andalucía, ES

2013-09-26 to 2015-01-18 | Researcher (Department of Mechanical Engineering and Industrial Design)
Employment
Source: Self-asserted source
Severo Raúl Fernández Vidal

Education and qualifications (1)

Universidad de Cádiz: Cadiz, Andalucía, ES

2013-02-25 to 2016-05-19 | Doctor
Education
Source: Self-asserted source
Severo Raúl Fernández Vidal

Works (47)

Biodegradable materials with FDM technology under the aging effect of solar and saltwater exposure

Advances in Mechanical Engineering
2023-11 | Journal article
DOI: 10.1177/16878132231201297
Part of ISSN: 1687-8132
Part of ISSN: 1687-8140
Contributors: Ana Pilar Valerga Puerta; Gema Fernandez-Sanz; Fermin Bañon; Severo R Fernandez-Vidal
Source: Self-asserted source
Severo Raúl Fernández Vidal

Fatigue behavior of 8 mm thick steel butt joints performed with hybrid laser arc welding

Journal of Laser Applications
2023-11-01 | Journal article
DOI: 10.2351/7.0001084
Contributors: J. M. Sánchez-Amaya; A. Gómez-Parra; C. Churiaque; S. R. Fernández-Vidal; A. J. Gámez
Source: check_circle
Crossref

Impact of In-Soil Ageing Effect on PLA Printed Parts Tensile Properties

Polymers
2023-02-09 | Journal article
DOI: 10.3390/polym15040862
Contributors: Ana P. Valerga; Severo R. Fernandez-Vidal; Franck Girot
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Design and Analysis of CFRP Drilling by Electrical Discharge Machining

Polymers
2022-03-25 | Journal article
DOI: 10.3390/polym14071340
Contributors: Luis Roldan-Jimenez; Fermin Bañon; Ana P. Valerga; Severo R. Fernandez-Vidal
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Mechanical Joining of Stacks

Encyclopedia of Materials: Composites
2021 | Book chapter
DOI: 10.1016/b978-0-12-819724-0.00065-3
Source: Self-asserted source
Severo Raúl Fernández Vidal

On improving the surface finish of 3D printing polylactic acid parts by corundum blasting

Rapid Prototyping Journal
2021 | Journal article
DOI: 10.1108/RPJ-05-2021-0105
EID:

2-s2.0-85111126917

Part of ISSN: 13552546
Contributors: Valerga Puerta, A.P.; Lopez-Castro, J.D.; Ojeda López, A.; Fernández Vidal, S.R.
Source: Self-asserted source
Severo Raúl Fernández Vidal via Scopus - Elsevier

Pulsed laser butt welding of AISI 1005 steel thin plates

Optics and Laser Technology
2021 | Journal article
DOI: 10.1016/j.optlastec.2020.106583
EID:

2-s2.0-85090862787

Part of ISSN: 00303992
Contributors: Chludzinski, M.; dos Santos, R.E.; Churiaque, C.; Fernández-Vidal, S.R.; Ortega-Iguña, M.; Sánchez-Amaya, J.M.
Source: Self-asserted source
Severo Raúl Fernández Vidal via Scopus - Elsevier

DISSEMINATION OF FINAL MASTER'S PROJECTS TO IMPROVE THE GRADUATION RATE AND THE VISIBILITY OF THE MASTER AND ITS GRADUATES

2021-03 | Conference paper
DOI: 10.21125/inted.2021.1687
Contributors: David Sales; Severo Fernández-Vidal
Source: check_circle
Crossref

Fused deposition modelling interfacial and interlayer bonding in PLA post-processed parts

Rapid Prototyping Journal
2020 | Journal article
DOI: 10.1108/RPJ-06-2019-0176
EID:

2-s2.0-85076515242

Part of ISSN: 13552546
Contributors: Valerga Puerta, A.P.; Fernandez-Vidal, S.R.; Batista, M.; Girot, F.
Source: Self-asserted source
Severo Raúl Fernández Vidal via Scopus - Elsevier

Photogrammetry as an Engineering Design Tool

Product Design
2020-10-28 | Book chapter
DOI: 10.5772/intechopen.92998
Source: Self-asserted source
Severo Raúl Fernández Vidal

On the Relationship between Mechanical Properties and Crystallisation of Chemically Post-Processed Additive Manufactured Polylactic Acid Pieces

Polymers
2020-04-18 | Journal article
DOI: 10.3390/polym12040941
Contributors: A.P. Valerga; S.R. Fernandez-Vidal; F. Girot; A.J. Gamez
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

On the Machinability of an Al-63%SiC Metal Matrix Composite

Materials
2020-03-06 | Journal article
DOI: 10.3390/ma13051186
Contributors: David Repeto; Severo Raul Fernández-Vidal; Pedro F. Mayuet; Jorge Salguero; Moisés Batista
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Study of the Influence of Helical Milling Parameters on the Quality of Holes in the UNS R56400 Alloy

Applied Sciences
2020-01-24 | Journal article
DOI: 10.3390/app10030845
Contributors: Francisco Javier Puerta-Morales; Jorge Salguero Gomez; Severo Raul Fernandez-Vidal
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Analysis of the drilling of the UNS A92024 alloy by cooling provided by biodegradable and low-cost vortex tube

Procedia Manufacturing
2019 | Conference paper
EID:

2-s2.0-85084298929

Part of ISSN: 23519789
Contributors: Roldan-Jimenez, L.; De Pando, M.F.; Fernandez-Vidal, S.R.
Source: Self-asserted source
Severo Raúl Fernández Vidal via Scopus - Elsevier

Experimental study of laser texturing processes on the lubricant retention of carbide (WC-Co) surfaces

Key Engineering Materials
2019 | Book
DOI: 10.4028/www.scientific.net/KEM.813.55
EID:

2-s2.0-85071566237
Contributors: Vazquez-Martinez, J.M.; Del-Sol, I.; Batista, M.; Fernandez-Vidal, S.R.; Hernandez, P.M.; Salguero, J.
Source: Self-asserted source
Severo Raúl Fernández Vidal via Scopus - Elsevier

Study of the one-shot drilling of CFRP/Ti6Al4V stacks with a double tip angle cutting-tool geometry

AIP Conference Proceedings
2019 | Conference paper
DOI: 10.1063/1.5112618
EID:

2-s2.0-85068848259
Contributors: Bañon, F.; Sambruno, A.; Batista, M.; Fernandez-Vidal, S.R.; Salguero, J.
Source: Self-asserted source
Severo Raúl Fernández Vidal via Scopus - Elsevier

Study on the use of alternative transmission mechanisms applied to additive manufacturing machines

Procedia Manufacturing
2019 | Conference paper
EID:

2-s2.0-85084299846

Part of ISSN: 23519789
Contributors: Fernández-Vidal, S.R.; Morales, F.J.P.; Parra, Á.G.; Valerga, A.P.
Source: Self-asserted source
Severo Raúl Fernández Vidal via Scopus - Elsevier

2. State of the art of the fused deposition modeling using PLA: improving the performance

Additive and Subtractive Manufacturing
2019-12-16 | Book chapter
DOI: 10.1515/9783110549775-002
Source: Self-asserted source
Severo Raúl Fernández Vidal

Wear Mechanisms and Wear Model of Carbide Tools during Dry Drilling of CFRP/TiAl6V4 Stacks

Materials
2019-09-04 | Journal article
DOI: 10.3390/ma12182843
Contributors: Unai Alonso Pinillos; Severo Raúl Fernández Vidal; Madalina Calamaz; Franck Andrés Girot Mata
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Analysis of the drilling of the UNS A92024 alloy by cooling provided by biodegradable and low-cost vortex tube

Procedia Manufacturing
2019-06 | Journal article
DOI: 10.1016/j.promfg.2019.10.003
Part of ISSN: 2351-9789
Source: Self-asserted source
Severo Raúl Fernández Vidal

Study on the use of alternative transmission mechanisms applied to additive manufacturing machines

Procedia Manufacturing
2019-06 | Journal article
DOI: 10.1016/j.promfg.2019.09.015
Part of ISSN: 2351-9789
Source: Self-asserted source
Severo Raúl Fernández Vidal

Impact of Chemical Post-Processing in Fused Deposition Modelling (FDM) on Polylactic Acid (PLA) Surface Quality and Structure

Polymers
2019-03 | Journal article | Author
DOI: 10.3390/polym11030566
Contributors: Ana Pilar Valerga Puerta; Moisés Batista Ponce; Severo Raúl Fernández Vidal; Antonio J. Gamez
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 3)‎

One-Shot Drilling Analysis of Stack CFRP/UNS A92024 Bonding by Adhesive

Materials
2019-01 | Journal article | Author
DOI: 10.3390/ma12010160
Contributors: Fermín Bañón García; ALEJANDRO SAMBRUNO; Sergio Fernandez-Vidal; Severo Raúl Fernández Vidal
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 3)‎

A comparison of macro and microgeometrical properties of specimens made with a fdm commercial printer and its opensource retrofit version

Annals of DAAAM and Proceedings of the International DAAAM Symposium
2018 | Conference paper
DOI: 10.2507/29th.daaam.proceedings.158
EID:

2-s2.0-85060085853
Contributors: Vega, D.P.; Ponce, M.B.; Puerta, A.P.V.; Martinez, J.M.V.; Vidal, S.R.F.
Source: Self-asserted source
Severo Raúl Fernández Vidal via Scopus - Elsevier

Effects of laser microtexturing on the wetting behavior of Ti6Al4V alloy

Coatings
2018 | Journal article
DOI: 10.3390/coatings8040145
EID:

2-s2.0-85051600974
Contributors: Vazquez-Martinez, J.M.; Gomez, J.S.; Ares, P.F.M.; Fernandez-Vidal, S.R.; Ponce, M.B.
Source: Self-asserted source
Severo Raúl Fernández Vidal via Scopus - Elsevier

Post-processing of PLA parts after additive manufacturing by FDM technology,Post-procesado de piezas en PLA tras su fabricación aditiva por deposición fundida (FDM)

Dyna (Spain)
2018 | Journal article
DOI: 10.6036/8859
EID:

2-s2.0-85056334559
Contributors: Valerga-Puerta, A.-P.; Batista-Ponce, M.; Fernández-Vidal, S.-R.; Girot-Mata, F.
Source: Self-asserted source
Severo Raúl Fernández Vidal via Scopus - Elsevier

Experimental Parametric Model for Adhesion Wear Measurements in the Dry Turning of an AA2024 Alloy

Materials
2018-09 | Journal article | Author
DOI: 10.3390/ma11091598
Contributors: Moisés Batista Ponce; I. Del Sol; Severo Raúl Fernández Vidal; J. SALGUERO
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 3)‎

Tool Wear Mechanism in Cutting of Stack CFRP/UNS A97075

Materials
2018-07 | Journal article
DOI: 10.3390/ma11081276
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 3)‎

Preface

Materials Science Forum
2017 | Book
EID:

2-s2.0-85029007039
Contributors: Salguero, J.; Batista, M.; Fernández-Vidal, S.R.
Source: Self-asserted source
Severo Raúl Fernández Vidal via Scopus - Elsevier

Tool-path effect on the geometric deviations in the machining of UNS A92024 aeronautic skins

Procedia Manufacturing
2017 | Journal article
DOI: 10.1016/j.promfg.2017.09.134
EID:

2-s2.0-85030852371
Contributors: Del Sol, I.; Rivero, A.; Salguero, J.; Fernández-Vidal, S.R.; Marcos, M.
Source: Self-asserted source
Severo Raúl Fernández Vidal via Scopus - Elsevier

A single students’ experience for visualizing completely a semester subject

Materials Science Forum
2016 | Book
DOI: 10.4028/www.scientific.net/MSF.853.1
EID:

2-s2.0-84958767788
Contributors: Gómez-Parra, A.; Salguero, J.; Batista, M.; Mayuet, P.; Álvarez, M.; Fernández-Vidal, S.R.; Puerta, F.; Del Sol, I.; Marcos, M.
Source: Self-asserted source
Severo Raúl Fernández Vidal via Scopus - Elsevier

Methodology for the Study of the Quality of CFRP Dry Drilling Based on Macrogeometrical and Dimensional Deviations

World Journal of Engineering and Technology
2016 | Journal article
DOI: 10.4236/wjet.2016.43d024
Part of ISSN: 2331-4222
Part of ISSN: 2331-4249
Source: Self-asserted source
Severo Raúl Fernández Vidal

Preliminary Study of the Influence of Manufacturing Parameters in Fused Deposition Modeling

DAAAM Proceedings
2016 | Book chapter
DOI: 10.2507/26th.daaam.proceedings.141
Part of ISSN: 1726-9679
Source: Self-asserted source
Severo Raúl Fernández Vidal
grade
Preferred source (of 2)‎

Processing and Quality Evaluation of Additive Manufacturing Monolayer Specimens

Advances in Materials Science and Engineering
2016 | Journal article
DOI: 10.1155/2016/5780693
EID:

2-s2.0-84973102832
Contributors: Wendt, C.; Fernández-Vidal, S.R.; Gómez-Parra, Á.; Batista, M.; Marcos, M.
Source: Self-asserted source
Severo Raúl Fernández Vidal via Scopus - Elsevier

Analysis of the Effects of Tool Wear on Dry Helical Milling of Ti6Al4V Alloy

Procedia Engineering
2015 | Conference paper
DOI: 10.1016/j.proeng.2015.12.536
EID:

2-s2.0-84962903652
Contributors: Fernández-Vidal, S.R.; Mayuet, P.; Rivero, A.; Salguero, J.; Del Sola, I.; Marcos, M.
Source: Self-asserted source
Severo Raúl Fernández Vidal via Scopus - Elsevier

Microgeometrical Deviations based Study of CFRP Drilled-holes

Procedia Engineering
2015 | Conference paper
DOI: 10.1016/j.proeng.2015.12.540
EID:

2-s2.0-84962921749
Contributors: Álvarez-Alcón, M.; Fernández-Vidal, S.R.; Clares, J.M.; Mayuet, P.F.; Batista, M.; Marcos, M.
Source: Self-asserted source
Severo Raúl Fernández Vidal via Scopus - Elsevier

Preliminary Design and Analysis of Tensile Test Samples Developed by Additive Manufacturing

Procedia Engineering
2015 | Conference paper
DOI: 10.1016/j.proeng.2015.12.489
EID:

2-s2.0-84962787124
Contributors: Wendt, C.; Batista, M.; Moreno, E.; Valerga, A.P.; Fernández-Vidal, S.R.; Droste, O.; Marcos, M.
Source: Self-asserted source
Severo Raúl Fernández Vidal via Scopus - Elsevier

Reverse Engineering Based Methodology for Modelling Cutting Tools

Procedia Engineering
2015 | Conference paper
DOI: 10.1016/j.proeng.2015.12.607
EID:

2-s2.0-84962921168
Contributors: Valerga, A.P.; Batista, M.; Bienvenido, R.; Fernández-Vidal, S.R.; Wendt, C.; Marcos, M.
Source: Self-asserted source
Severo Raúl Fernández Vidal via Scopus - Elsevier

SOM/SEM based Characterization of Internal Delaminations of CFRP Samples Machined by AWJM

Procedia Engineering
2015 | Conference paper
DOI: 10.1016/j.proeng.2015.12.549
EID:

2-s2.0-84962838984
Contributors: Mayuet, P.F.; Girot, F.; Lamíkiz, A.; Fernández-Vidal, S.R.; Salguero, J.; Marcos, M.
Source: Self-asserted source
Severo Raúl Fernández Vidal via Scopus - Elsevier

Cutting speed and feedrate based analysis of cutting forces in the One Shot Drilling (OSD) of CFRC/Al hybrid stacks

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2014 | Conference paper
DOI: 10.1115/IMECE2014-38027
EID:

2-s2.0-84926306881
Contributors: Salguero, J.; Mayuet, P.; Ponce, M.B.; Rosales, E.I.; Fernandez-Vidal, S.R.; Marcos, M.
Source: Self-asserted source
Severo Raúl Fernández Vidal via Scopus - Elsevier

Experimental study of the axial cutting forces in the dry drilling of CFRP

16th European Conference on Composite Materials, ECCM 2014
2014 | Conference paper
EID:

2-s2.0-84915749370
Contributors: Portal, A.; Fernández-Vidal, S.R.; Mayuet, P.; Arroyo, P.; Salguero, J.; Marcos, M.
Source: Self-asserted source
Severo Raúl Fernández Vidal via Scopus - Elsevier

Tribological wear analysis of laser surface treated Ti6Al4V based on volume lost evaluation

Key Engineering Materials
2014 | Book
DOI: 10.4028/www.scientific.net/KEM.615.82
EID:

2-s2.0-84904118710
Contributors: Vázquez-Martínez, J.M.; Salguero, J.; Botana, F.J.; Gómez-Parra, A.; Fernandez-Vidal, S.R.; Marcos, M.
Source: Self-asserted source
Severo Raúl Fernández Vidal via Scopus - Elsevier

Comparison of Diameter and Area Change Based Methods for Evaluating Break-IN and Break-OUT Damages in Dry Drilled Holes of Aeronautical Carbon Fiber Composites

Materials Science Forum
2014-06 | Journal article
DOI: 10.4028/www.scientific.net/msf.797.35
Part of ISSN: 1662-9752
Source: Self-asserted source
Severo Raúl Fernández Vidal
grade
Preferred source (of 2)‎

Preface, Scientific Committee and Sponsors

Key Engineering Materials
2014-06 | Journal issue or edition
DOI: 10.4028/www.scientific.net/kem.615
Part of ISSN: 1662-9795
Source: Self-asserted source
Severo Raúl Fernández Vidal

Design and development of integrated lab-practical class in manufacturing engineering

Materials Science Forum
2013 | Book
DOI: 10.4028/www.scientific.net/MSF.759.27
EID:

2-s2.0-84880716761
Contributors: Batista, M.; Salguero, J.; Álvarez, M.; Gómez, A.; González, J.M.; Mayuet, P.F.; Fernández, S.R.; Marcos, M.
Source: Self-asserted source
Severo Raúl Fernández Vidal via Scopus - Elsevier

Metrological evaluation of the tribological behavior of laser surface treated Ti6Al4V alloy

Procedia Engineering
2013 | Conference paper
DOI: 10.1016/j.proeng.2013.08.265
EID:

2-s2.0-84891697271
Contributors: Vázquez-Martínez, J.M.; Salguero, J.; Botana, F.J.; Contreras, J.P.; Fernández-Vidal, S.R.; Marcos, M.
Source: Self-asserted source
Severo Raúl Fernández Vidal via Scopus - Elsevier

SOM based methodology for evaluating shrinkage parameter of the chip developed in titanium dry turning process

Procedia CIRP
2013 | Conference paper
DOI: 10.1016/j.procir.2013.06.146
EID:

2-s2.0-84881147272
Contributors: Batista, M.; Salguero, J.; Gomez-Parra, A.; Fernández-Vidal, S.; Marcos, M.
Source: Self-asserted source
Severo Raúl Fernández Vidal via Scopus - Elsevier

Peer review (35 reviews for 10 publications/grants)

Review activity for Applied sciences. (2)
Review activity for Coatings. (2)
Review activity for Energies. (6)
Review activity for Journal of manufacturing and materials processing. (1)
Review activity for Journal of Zhejiang University. (1)
Review activity for Machines. (1)
Review activity for Materials. (11)
Review activity for Metals. (8)
Review activity for Processes. (2)
Review activity for Sensors. (1)
How many people are using ORCID?