Personal information

Emails & domains

Verified email domains

Other IDs

Scopus Author ID: 57209822609

Countries

Spain

Activities

Collapse all

Works (28)

Dimensional errors of aeronautical casings caused by machining of thin walls and features

Results in Engineering
2025-06 | Journal article
DOI: 10.1016/j.rineng.2025.104719
Contributors: Felipe Marin; Guillermo González; Luis Norberto López de Lacalle; Naiara Ortega; Gaizka Gómez-Escudero; Pablo Fernández-Lucio; Ander Del Olmo; Haizea González
Source: check_circle
Crossref

Effect of V concentration in TiSiN monolayer coating on chip formation mechanism and chip sliding velocity during dry turning of Ti–6Al–4V alloy

Journal of Materials Research and Technology
2024-09 | Journal article
DOI: 10.1016/j.jmrt.2024.09.007
Contributors: Ch Sateesh Kumar; Gorka Urbikain; Pablo Fernández De Lucio; Cristian Pérez-Salinas; Luis Norberto López De Lacalle; Filipe Fernandes
Source: check_circle
Crossref

Enhancement of ceramic tool behaviour with textured grooves during machining of Inconel® 718

The International Journal of Advanced Manufacturing Technology
2024-09 | Journal article
DOI: 10.1007/s00170-024-14222-2
Contributors: P. Fernández-Lucio; G. Urbikain; S. Plaza; E. Ukar; O. Pereira
Source: check_circle
Crossref

Enhancement of ceramic tool behaviour with textured grooves during machining of Inconel® 718

2024-06-10 | Preprint
DOI: 10.21203/rs.3.rs-4399149/v1
Contributors: Pablo Fernández De Lucio; Gorka Urbikain; Soraya Plaza; Eneko Ukar; Octavio Pereira
Source: check_circle
Crossref

Planetary Dragging Cutting Edge Treatment and Edge Rounding Prediction on Carbide Tools

2023 | Book chapter
DOI: 10.1007/978-3-031-38563-6_43
Contributors: Cristian Pérez-Salinas; L. N. López de Lacalle; Pablo Fernández-Lucio; Octavio Pereira-Neto
Source: check_circle
Crossref

Influence of Grooves Angle of Textured Ceramic Tools on the Final Roughness and Cutting Forces of Cold Work Tool Steel

Key Engineering Materials
2023-09-27 | Journal article
DOI: 10.4028/p-gH0GjS
Contributors: Pablo Fernández-Lucio; Octavio Pereira Neto; Gorka Urbikain; Eneko Ukar; Luis Norberto López de Lacalle
Source: check_circle
Crossref

INFLUENCE OF SIDE CUTTING EDGE ANGLE ON THE DESIGN OF THE CHIPBREAKER: STUDY OF DYNAMIC AND HIGH FEED TURNING TOOLS IN INCONEL® 718

DYNA
2023-07-01 | Journal article
DOI: 10.6036/10876
Contributors: FRANCISCO JAVIER AMIGO; ASIER FERNANDEZ VALDIVIELSO; PABLO FERNANDEZ DE LUCIO; OCTAVIO PEREIRA NETO; GORKA URBICAIN PELAYO; FREDDY CORRALES LACAYO; LUIS NORBERTO LOPEZ DE LA CALLE MARCAIDE
Source: check_circle
Crossref

Threading holder based on axial metal cylinder pins to reduce tap risk during reversion instant

Alexandria Engineering Journal
2023-03 | Journal article
DOI: 10.1016/j.aej.2022.10.060
Contributors: P. Fernández-Lucio; A. Gil Del Val; S. Plaza; O. Pereira; A. Fernández-Valdivielso; L.N. López de Lacalle
Source: check_circle
Crossref

ANALYSIS OF THE SUBJECT STARTING POINT AND ASPECTS FOR IMPROVEMENT BASED ON THE RESULTS OF THE STUDENT SURVEYS

2022-11 | Conference paper
DOI: 10.21125/iceri.2022.1750
Contributors: Gaizka Gómez; Pablo Fernández; Maialen Martinez de Aguirre; Haizea González; Saioa Etxebarria; Octavio Pereira; Amaia Calleja; Luis Norberto López de la Calle
Source: check_circle
Crossref

APPLICATION OF ACTIVE METHODOLOGIES IN THE DESCRIPTIVE SUBJECT OF ‘MECHANICAL TECHNOLOGY’

2022-11 | Conference paper
DOI: 10.21125/iceri.2022.1752
Contributors: Maialen Martinez de Aguirre; Gaizka Gómez; Pablo Fernández; Haizea González; Saioa Etxebarria; Amaia Calleja; Luis Norberto López de la Calle
Source: check_circle
Crossref

Turning of Austempered Ductile Iron with ceramic tools

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
2021 | Journal article
DOI: 10.1177/0954405420957154
EID:

2-s2.0-85091242235

Part of ISSN: 20412975 09544054
Contributors: Fernández-Valdivielso, A.; López de Lacalle, L.N.; Fernández-Lucio, P.; González, H.
Source: Self-asserted source
Pablo Fernández De Lucio via Scopus - Elsevier

Comparative study of finishing techniques for age-hardened Inconel 718 alloy

Journal of Materials Research and Technology
2021-11 | Journal article
DOI: 10.1016/j.jmrt.2021.11.024
Contributors: Sarasua Miranda, Jon Ander; Cristobal, Ander Trinidad; González-Barrio, Haizea; Fernández-Lucio, Pablo; Gómez-Escudero, Gaizka; Madariaga, Aitor; Arrazola, Pedro Jose
Source: check_circle
Universidad del País Vasco

Effects of laser-textured on rake face in turning PCD tools for Ti6Al4V

Journal of Materials Research and Technology
2021-11 | Journal article
DOI: 10.1016/j.jmrt.2021.08.004
Contributors: Fernández-Lucio, P.; Villarón-Osorno, I.; Pereira Neto, O.; Ukar, E.; López de Lacalle, L.N.; Gil del Val, A.
Source: check_circle
Universidad del País Vasco

MACHINE LEARNING IN THE FIELD OF MANUFACTURING

DYNA
2021-11-01 | Journal article
DOI: 10.6036/10197
Contributors: GAIZKA GOMEZ ESCUDERO; PABLO FERNANDEZ DE LUCIO; HAIZEA GONZALEZ BARRIO; AMAIA CALLEJA OCHOA; IZARO AYESTA REMENTERIA; LUIS NORBERTO LOPEZ DE LA CALLE MARCAIDE
Source: check_circle
Crossref

Comparison between milling roughing operations in full slotting manufacturing: trochoidal, plunge and conventional milling

IOP Conference Series: Materials Science and Engineering / 9th Manufacturing Engineering Society International Conference (MESIC 2021) 23rd-25th June 2021, Gijόn, Spain
2021-10 | Conference paper
DOI: 10.1088/1757-899x/1193/1/012003
Contributors: Gómez, G; Fernández De Lucio, P; Del Olmo, A; Martínez De Pissón, G; Jimeno, A; González, H; López De Lacalle, L N
Source: check_circle
Universidad del País Vasco

Deep hole finishing of Inconel 718 SLMed features by endmilling and reaming

IOP Conference Series: Materials Science and Engineering / 9th Manufacturing Engineering Society International Conference (MESIC 2021) 23rd-25th June 2021, Gijόn, Spain
2021-10 | Conference paper
DOI: 10.1088/1757-899x/1193/1/012006
Contributors: Pérez, J D; Fernandez, P; Del Olmo, A; López De Lacalle, L N
Source: check_circle
Universidad del País Vasco

Turning process with ceramic inserts of ADI cast material, surface analysis

IOP Conference Series: Materials Science and Engineering / 9th Manufacturing Engineering Society International Conference (MESIC 2021) 23rd-25th June 2021, Gijόn, Spain
2021-10 | Conference paper
DOI: 10.1088/1757-899x/1193/1/012002
Contributors: Fernández, A; González, H; Fernández, P; Calleja, A; Urbikain, G; López De Lacalle, L N
Source: check_circle
Universidad del País Vasco

Roughing Milling with Ceramic Tools in Comparison with Sintered Carbide on Nickel-Based Alloys

Coatings
2021-06-18 | Journal article
DOI: 10.3390/coatings11060734
Contributors: Pablo Fernández-Lucio; Octavio Pereira Neto; Gaizka Gómez-Escudero; Francisco Javier Amigo Fuertes; Asier Fernández Valdivielso; Luis Norberto López de Lacalle Marcaide
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

A precise milling of integral blade rotors by using different strategies

Proceedings of the 20th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2020
2020 | Conference paper
EID:

2-s2.0-85091569793
Contributors: González-Barrio, H.; Calleja-Ochoa, A.; Gómez-Escudero, G.; Fernández-Lucio, P.; Polvorosa, R.; López de Lacalle, L.N.
Source: Self-asserted source
Pablo Fernández De Lucio via Scopus - Elsevier

Analysis of the influence of the hydrostatic ball burnishing pressure in the surface hardness and roughness of medium carbon steels

IOP Conference Series: Materials Science and Engineering
2020 | Conference paper
DOI: 10.1088/1757-899X/968/1/012021
EID:

2-s2.0-85096465592

Part of ISSN: 1757899X 17578981
Contributors: Fernandez-Lucio, P.; Gonzalez-Barrio, H.; Gomez-Escudero, G.; Pereira, O.; Lopez De Lacalle, L.N.; Rodriguez, A.
Source: Self-asserted source
Pablo Fernández De Lucio via Scopus - Elsevier

Combination of high feed turning with cryogenic cooling on Haynes 263 and Inconel 718 superalloys

Journal of Manufacturing Processes
2020 | Journal article
DOI: 10.1016/j.jmapro.2020.08.029
EID:

2-s2.0-85089495503

Part of ISSN: 15266125
Contributors: Amigo, F.J.; Urbikain, G.; Pereira, O.; Fernández-Lucio, P.; Fernández-Valdivielso, A.; de Lacalle, L.N.L.
Source: Self-asserted source
Pablo Fernández De Lucio via Scopus - Elsevier

Machining of developable ruled surfaces using mathematical algorithms,Mecanizado de superficies regladas desarrollables mediante algoritmos matemáticos

Dyna (Spain)
2020 | Journal article
DOI: 10.6036/9406
EID:

2-s2.0-85087073559

Part of ISSN: 19891490 00127361
Contributors: Calleja-Ochoa, A.; Gonzalez-Barrio, H.; Polvorosa-Teijeiro, R.; Amigo, F.J.; Gómez-Escudero, G.; Fernández-De-Lucio, P.; Barton, M.; Bo, P.; López-De-Lacalle-Marcaide, L.-N.
Source: Self-asserted source
Pablo Fernández De Lucio via Scopus - Elsevier

Ranurado de alto rendimiento: fresado trocoidal

Metalindustria
2020 | Journal article
OTHER-ID:

UPV/EHU:5074601
Contributors: del Olmo Sanz,Ander; Jimeno Beitia,Aner; Martínez de Pissón Caruncho,G.; Gómez Escudero,Gaizka; Fernández de Lucio,Pablo; González Barrio,Haizea; López de Lacalle Marcaide,L. N.
Source: check_circle
Universidad del País Vasco

Ebaketa-erradioaren eragina Inconel®718 fresatzeko erreminten bizitza erabilgarrian

EKAIA Euskal Herriko Unibertsitateko Zientzia eta Teknologia Aldizkaria
2020-12-15 | Journal article
DOI: 10.1387/ekaia.22061
Contributors: Ander Del Olmo-Sanz; Gaizka Gómez-Escudero; Pablo Fernández-Lucio; Ainhoa Celaya; Luis Norberto López de Lacalle
Source: check_circle
Crossref

Definition of tailor made cutting tools for machining of complex surfaces based on final surface shape

2020 International Conference on Mathematics and Computers in Science and Engineering (MACISE)
2020-01 | Conference paper
DOI: 10.1109/macise49704.2020.00031
Contributors: Escudero, Gaizka Gomez; De Lucio, Pablo Fernandez; Barrio, Haizea Gonzalez; de Lacalle Marcaide, Luis Norberto Lopez; Ochoa, Amaia Calleja; Barton, Michael
Source: check_circle
Universidad del País Vasco

Abrasive tool behavior comparing lubri-cooling techniques for Super Abrasive Machining full-slotting in Inconel®718

Procedia Manufacturing
2019 | Conference paper
EID:

2-s2.0-85084324666

Part of ISSN: 23519789
Contributors: González, H.; Fernández-Lucio, P.; Pereira, O.; Calleja, A.; Fernández-Valdivielso, A.; De Lacalle, L.N.L.
Source: Self-asserted source
Pablo Fernández De Lucio via Scopus - Elsevier

Free-form tools design and fabrication for flank super abrasive machining (FSAM) non developable surfaces

MM Science Journal
2019 | Journal article
DOI: 10.17973/MMSJ.2019_11_2019056
EID:

2-s2.0-85074684040

Part of ISSN: 18050476 18031269
Contributors: Gómez-Escudero, G.; González, H.; Bartoň, M.; Bo, P.; Fernández-Lucio, P.; López de Lacalle, L.N.; Calleja, A.
Source: Self-asserted source
Pablo Fernández De Lucio via Scopus - Elsevier

Influence of cutting edge radius on tool life in milling inconel 718

AIP Conference Proceedings
2019 | Conference paper
DOI: 10.1063/1.5112627
EID:

2-s2.0-85068828136

Part of ISSN: 15517616 0094243X
Contributors: Celaya, A.; Pereira, O.; González, H.; Gómez-Escudero, G.; Fernández-Lucio, P.; Fernández-Valdivielso, A.; De Lacalle, L.N.L.
Source: Self-asserted source
Pablo Fernández De Lucio via Scopus - Elsevier
How many people are using ORCID?