Personal information

Websites & social links

University of West Bohemia

Other IDs

ResearcherID: J-3135-2016
Scopus Author ID: 56938580900
ResearcherID: J-3135-2016

Keywords

Composite materials, Numerical simulation, Structural optimization

Countries

Czech Republic

Activities

Collapse all

Employment (1)

University of West Bohemia: Plzen, Czech Republic, CZ

2012-08-01 to present | Researcher/Professor assistant (Faculty of Mechanical engineering)
Employment
Source: Self-asserted source
František Sedláček

Works (39)

Methodology of Using CAx and Digital Twin Methods in the Development of a Multifunctional Portal Centre in Its Pre-Production Phase

Applied Sciences
2025-03 | Journal article | Author
DOI: 10.3390/app15063312
Contributors: Petr Bernardin; Zdenek Hajicek; Petr Janda; Josef Kozák; František Sedláček; Vaclava Lasova; Jiri Kubicek
Source: check_circle
Multidisciplinary Digital Publishing Institute

Determination of Mechanical Properties of Blind Rivet Joints Using Numerical Simulations and Experimental Testing

Materials
2025-01 | Journal article | Author
DOI: 10.3390/ma18020229
Contributors: Martin Beber; Martin Stejskal; František Sedláček
Source: check_circle
Multidisciplinary Digital Publishing Institute

Sensitivity Analysis and Influence Evaluation of Progressive Wall Thickness of Honeycomb Structures as Energy Absorber Produced by Additive Technology Multi-Jet Fusion

Materials
2024-12 | Journal article | Author
DOI: 10.3390/ma18010001
Contributors: Tomas Kalina; Zdenek Chval; František Sedláček; Stanislav Spirk
Source: check_circle
Multidisciplinary Digital Publishing Institute

Identification of the Cohesive Parameters for Modelling of Bonded Joints between Flat Composite Adherends with Thick Layer of Adhesive

Materials
2024-10 | Journal article | Author
DOI: 10.3390/ma17194880
Contributors: Petr Bernardin; František Sedláček; Josef Kozák; Ludmila Kučerová; Vaclava Lasova
Source: check_circle
Multidisciplinary Digital Publishing Institute

Optimization of Components with Topology Optimization for Direct Additive Manufacturing by DLMS

Materials
2023-08 | Journal article | Author
DOI: 10.3390/ma16155422
Contributors: František Sedláček; Tomas Kalina; Martin Štěpánek
Source: check_circle
Multidisciplinary Digital Publishing Institute

Stabilizing legs with possibility of loss of stability to protect glass fibre reinforced tank

Materials Today: Proceedings
2022 | Journal article
DOI: 10.1016/J.MATPR.2022.02.598
WOSUID: WOS:000818797700017
Contributors: Kottner, Radek; Sedlacek, Frantisek; Jahodnik, Ondrej
Source: check_circle
Web of Science Researcher Profile Sync

Design of Composite Disc Spring for Automotive Suspension with using Numerical Simulation

Manufacturing Technology
2021 | Journal article
DOI: 10.21062/MFT.2021.100
WOSUID: WOS:000859948900012
Contributors: Mrazek, Martin; Skovajsa, Michal; Sedlacek, Frantisek
Source: check_circle
Web of Science Researcher Profile Sync

DETERMINATION OF MECHANICAL PROPERTIES OF COMPOSITE SANDWICH PANEL WITH ALUMINIUM HONEYCOMB CORE

MM Science Journal
2021 | Journal article
DOI: 10.17973/MMSJ.2021_12_2021132
WOSUID: WOS:000730809900001
Contributors: Skovajsa, Michal; Sedlacek, Frantisek; Mrazek, Martin
Source: check_circle
Web of Science Researcher Profile Sync

NUMERICAL AND EXPERIMENTAL MODAL ANALYSIS OF A CARBON FIBRE MONOCOQUE

MM Science Journal
2021 | Journal article
DOI: 10.17973/MMSJ.2021_6_2021048
WOSUID: WOS:000658344000006
Contributors: Skovajsa, Michal; Kroft, Roman; Sedlacek, Frantisek
Source: check_circle
Web of Science Researcher Profile Sync

Design of Multi-Part Mould for Production of a Medium-Large Carbon Fibre Component

Manufacturing Technology
2020 | Journal article
DOI: 10.21062/MFT.2020.055
WOSUID: WOS:000859944000016
Contributors: Skovajsa, Michal; Sedlacek, Frantisek; Mrazek, Martin
Source: check_circle
Web of Science Researcher Profile Sync

DETERMINATION OF MECHANICAL PROPERTIES OF ADDITIVE MANUFACTURED CONTINUOUS FIBRE REINFORCED THERMOPLASTIC COMPOSITES

INTERNATIONAL CONFERENCE INTEGRITY-RELIABILITY-FAILURE (IRF2020)
2020 | Journal article
WOSUID: WOS:000731040500008
Contributors: Sedlacek, Frantisek; Raz, Karel; Chval, Zdenek
Source: check_circle
Web of Science Researcher Profile Sync

Experimental Testing of Basic Crash Elements Made of CFRP by Additive Technologies

Manufacturing Technology
2020 | Journal article
DOI: 10.21062/MFT.2020.092
WOSUID: WOS:000859944800006
Contributors: Kalina, Tomas; Spirk, Stanislav; Sedlacek, Frantisek
Source: check_circle
Web of Science Researcher Profile Sync

Composite-to-metal tubular lap joint under torsional loading

MM Science Journal
2019 | Journal article
DOI: 10.17973/MMSJ.2019_12_2019003
EID:

2-s2.0-85076604276

Part of ISBN:

18050476 18031269
Contributors: Bernardin, P.; Sedlacek, F.; Lasova, V.; Kottner, R.
Source: Self-asserted source
František Sedláček via Scopus - Elsevier

Design and determination of strength of adhesive bonded joints

Manufacturing Technology
2019 | Journal article
DOI: 10.21062/ujep/305.2019/a/1213-2489/mt/19/3/409
EID:

2-s2.0-85069853049

Part of ISBN:

12132489
Contributors: Kalina, T.; Sedláček, F.
Source: Self-asserted source
František Sedláček via Scopus - Elsevier

Determination of mode II interlaminar fracture toughness of CFRP composites using numerical simulations

Key Engineering Materials
2019 | Book
DOI: 10.4028/www.scientific.net/KEM.801.71
EID:

2-s2.0-85070951290

Part of ISBN:

10139826
Contributors: Sedlacek, F.; Kalina, T.; Raz, K.
Source: Self-asserted source
František Sedláček via Scopus - Elsevier
grade
Preferred source (of 2)‎

Determining the dynamic properties of a cutting machine tool ram

Annals of DAAAM and Proceedings of the International DAAAM Symposium
2019 | Conference paper
DOI: 10.2507/30th.daaam.proceedings.129
EID:

2-s2.0-85077871891

Part of ISBN:

17269679
Contributors: Svagr, M.; Sedlacek, F.; Sika, J.
Source: Self-asserted source
František Sedláček via Scopus - Elsevier

Dimension Stability of Thin-Walled Parts from 3D Printed Composite Materials

Structural Integrity
2019 | Book chapter
DOI: 10.1007/978-3-319-91989-8_16
EID:

2-s2.0-85085208469

Part of ISBN:

25225618 2522560X
Contributors: Chval, Z.; Raz, K.; Sedlacek, F.
Source: Self-asserted source
František Sedláček via Scopus - Elsevier
grade
Preferred source (of 2)‎

Effect of melt temperature on weld line strength

Key Engineering Materials
2019 | Book
DOI: 10.4028/www.scientific.net/KEM.801.264
EID:

2-s2.0-85070972235

Part of ISBN:

10139826
Contributors: Raz, K.; Sedlacek, F.
Source: Self-asserted source
František Sedláček via Scopus - Elsevier
grade
Preferred source (of 2)‎

Optimization of Additive Manufactured Components Using Topology Optimization

Structural Integrity
2019 | Book chapter
DOI: 10.1007/978-3-319-91989-8_22
EID:

2-s2.0-85085174305

Part of ISBN:

25225618 2522560X
Contributors: Sedlacek, F.; Lasova, V.
Source: Self-asserted source
František Sedláček via Scopus - Elsevier
grade
Preferred source (of 2)‎

Optimization of main parts of a heavy duty cnc machine centre using a topological optimization

Annals of DAAAM and Proceedings of the International DAAAM Symposium
2019 | Conference paper
DOI: 10.2507/30th.daaam.proceedings.071
EID:

2-s2.0-85077859548

Part of ISBN:

17269679
Contributors: Sedlacek, F.; Lasova, V.; Bernardin, P.; Janda, P.; Svagr, M.
Source: Self-asserted source
František Sedláček via Scopus - Elsevier

Additive manufacturing of PA6 with short carbon fibre reinforcement using fused deposition modelling

Materials Science Forum
2018 | Book
DOI: 10.4028/www.scientific.net/MSF.928.26
EID:

2-s2.0-85053165022

Part of ISBN:

02555476
Contributors: Sedlacek, F.; Lasova, V.
Source: Self-asserted source
František Sedláček via Scopus - Elsevier
grade
Preferred source (of 2)‎

Determination of cohesive parameters for mode I of epoxy adhesive

Annals of DAAAM and Proceedings of the International DAAAM Symposium
2018 | Conference paper
DOI: 10.2507/29th.daaam.proceedings.108
EID:

2-s2.0-85060112072

Part of ISBN:

17269679
Contributors: Kalina, T.; Sedlacek, F.; Kroupa, T.
Source: Self-asserted source
František Sedláček via Scopus - Elsevier

Determination of the influence of adherent surface on the adhesive bond strength

MATEC Web of Conferences
2018 | Conference paper
DOI: 10.1051/matecconf/201815705012
EID:

2-s2.0-85044771208

Part of ISBN:

2261236X
Contributors: Kalina, T.; Sedlacek, F.; Krystek, J.
Source: Self-asserted source
František Sedláček via Scopus - Elsevier
grade
Preferred source (of 2)‎

Determining the strength of composite cylindrical bonded joints using numerical simulation with cohesive elements

Annals of DAAAM and Proceedings of the International DAAAM Symposium
2018 | Conference paper
DOI: 10.2507/29th.daaam.proceedings.090
EID:

2-s2.0-85060073833

Part of ISBN:

17269679
Contributors: Sedlacek, F.; Kalina, T.; Raab, Z.
Source: Self-asserted source
František Sedláček via Scopus - Elsevier

Numerical simulation and experimental testing of two-axle chassis of low-floor trams

Manufacturing Technology
2018 | Journal article
DOI: 10.21062/ujep/86.2018/a/1213-2489/MT/18/2/248
EID:

2-s2.0-85046966510

Part of ISBN:

12132489
Contributors: Kalina, T.; Heller, P.; Chval, Z.; Sedláček, F.; Křížek, M.; Bartoň, L.
Source: Self-asserted source
František Sedláček via Scopus - Elsevier
grade
Preferred source (of 2)‎

Analytic determination and numerical simulation of torsional stiffness of a racing car frame

Annals of DAAAM and Proceedings of the International DAAAM Symposium
2017 | Conference paper
DOI: 10.2507/28th.daaam.proceedings.094
EID:

2-s2.0-85040718281

Part of ISBN:

17269679
Contributors: Skovajsa, M.; Sedlacek, F.
Source: Self-asserted source
František Sedláček via Scopus - Elsevier

Design and optimization of composite parts using numerical simulations

2017 International Conference on Mechanical, System and Control Engineering, ICMSC 2017
2017 | Conference paper
DOI: 10.1109/ICMSC.2017.7959434
EID:

2-s2.0-85025839873
Contributors: Sedlacek, F.; Lasova, V.
Source: Self-asserted source
František Sedláček via Scopus - Elsevier
grade
Preferred source (of 3)‎

Determination of fdmprinter settings with regard to geometrical accuracy

Annals of DAAAM and Proceedings of the International DAAAM Symposium
2017 | Conference paper
DOI: 10.2507/28th.daaam.proceedings.079
EID:

2-s2.0-85040723024

Part of ISBN:

17269679
Contributors: Polak, R.; Sedlacek, F.; Raz, K.
Source: Self-asserted source
František Sedláček via Scopus - Elsevier

Determining the strength of composite integrated joints using numerical simulations

Annals of DAAAM and Proceedings of the International DAAAM Symposium
2017 | Conference paper
DOI: 10.2507/28th.daaam.proceedings.077
EID:

2-s2.0-85040718084

Part of ISBN:

17269679
Contributors: Sedlacek, F.; Lasova, V.
Source: Self-asserted source
František Sedláček via Scopus - Elsevier

Optimal design of a composite bellows coupling using a structural optimization

2017 | Conference paper
DOI: 10.1063/1.4983606
Contributors: Frantisek Sedlacek; Petr Bernardin; Vaclava Lasova
Source: Self-asserted source
František Sedláček via Crossref Metadata Search
grade
Preferred source (of 3)‎

Optimisation of metal-to-composite bonded joints with various adhesive layer configurations using finite element method,Usporedba izmeču veznih spojeva od metala i kompozita povezanih razliđitim konfiguracijama veznog spoja primjenom metode konačnih elemenata

Tehnicki Vjesnik
2017 | Journal article
DOI: 10.17559/TV-20160122124303
EID:

2-s2.0-85032497461

Part of ISBN:

13303651
Contributors: Lašová, V.; Bernardin, P.; Sedláček, F.
Source: Self-asserted source
František Sedláček via Scopus - Elsevier
grade
Preferred source (of 2)‎

Usage of FEM simulations in design of piping systems

Manufacturing Technology
2017 | Journal article
EID:

2-s2.0-85029568966

Part of ISBN:

12132489
Contributors: Chval, Z.; Sedlacek, F.; Kemka, V.
Source: Self-asserted source
František Sedláček via Scopus - Elsevier

STRENGTH ANALYSIS OF PIN CONNECTIONS USING COMPUTER AIDED SYSTEMS

MM Science Journal
2017-03-08 | Journal article
DOI: 10.17973/mmsj.2017_03_2016103
Contributors: Petr Bernardin; Vaclava Lasova; Frantisek Sedlacek
Source: Self-asserted source
František Sedláček via Crossref Metadata Search
grade
Preferred source (of 3)‎

Design of a Composite Leaf Spring for Railway Vehicles

Proceedings of the 27th International DAAAM Symposium 2016
2016 | Other
DOI: 10.2507/27th.daaam.proceedings.074
Contributors: Frantisek Sedlacek; Petr Bernardin; Vaclava Lasova
Source: Self-asserted source
František Sedláček via Crossref Metadata Search
grade
Preferred source (of 3)‎

Design of Flexible Composite Bellows Coupling

Proceedings of the 26th International DAAAM Symposium 2016
2016 | Other
DOI: 10.2507/26th.daaam.proceedings.130
Contributors: Frantisek Sedlacek; Vaclava Lasova; Radek Kottner
Source: Self-asserted source
František Sedláček via Crossref Metadata Search
grade
Preferred source (of 3)‎

Numerical Simulation of Delamination in Laminated Composite Plates Using Cohesive Elements

Proceedings of the 27th International DAAAM Symposium 2016
2016 | Other
DOI: 10.2507/27th.daaam.proceedings.098
Contributors: Michal Skovajsa; Frantisek Sedlacek
Source: Self-asserted source
František Sedláček via Crossref Metadata Search
grade
Preferred source (of 3)‎

Strength Determination of Composite Flexible Joint

Applied Mechanics and Materials
2016-02 | Journal article
DOI: 10.4028/www.scientific.net/amm.827.149
Contributors: František Sedláček; Václava Lašová; Radek Kottner
Source: Self-asserted source
František Sedláček via Crossref Metadata Search
grade
Preferred source (of 2)‎

Comparison of numerical simulation and experiment of a flexible composite connecting rod

Proceedings of the International Conference of DAAAM Baltic "Industrial Engineering"
2015 | Conference paper
EID:

2-s2.0-84979581152

Part of ISBN:

23466138 2346612X
Contributors: Sedláček, F.; Lašová, V.; Kottner, R.; Bernardin, P.
Source: Self-asserted source
František Sedláček via Scopus - Elsevier

Determination of strength of composite flexible join

EAN 2015 - 53rd Conference on Experimental Stress Analysis
2015 | Conference paper
EID:

2-s2.0-84945979867
Contributors: Sedláček, F.; Lašová, V.; Kottner, R.
Source: Self-asserted source
František Sedláček via Scopus - Elsevier
How many people are using ORCID?