Personal information

Other IDs

Scopus Author ID: 15042816200
ResearcherID: Q-4147-2017

Countries

Czech Republic

Activities

Collapse all

Employment (1)

Brno University of Technology: Brno, CZ

Employment
Source: check_circle
IS - Brno University of Technology

Education and qualifications (1)

Brno University of Technology: Brno, CZ

2018-01-01 to present (Institute of Solid Mechanics, Mechatronics and Biomechanics)
Education
Source: Self-asserted source
Tomáš Návrat

Works (50 of 61)

Items per page:
Page 1 of 2

Comparison of temperature and mechanical stress-strain distributions of steel billets with sharp and rounded corners

METAL 2020 - 29th International Conference on Metallurgy and Materials, Conference Proceedings
2020 | Conference paper
DOI: 10.37904/metal.2020.3443
EID:

2-s2.0-85096775589
Contributors: Brezina, M.; Návrat, T.; Štetina, J.; Kovár, J.; Klimeš, L.; Mauder, T.; Petruška, J.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier

Efficiency of plasticity correction in the hole-drilling residual stress measurement

Materials
2020 | Journal article
DOI: 10.3390/ma13153396
EID:

2-s2.0-85089755941

Part of ISSN: 19961944
Contributors: Návrat, T.; Halabuk, D.; Vosynek, P.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier
grade
Preferred source (of 2)‎

Percutaneous versus open pedicle screw fixation for treatment of type A thoracolumbar fractures

European Journal of Trauma and Emergency Surgery
2020 | Journal article
DOI: 10.1007/s00068-018-0998-4
EID:

2-s2.0-85052719091
Contributors: Kocis, J.; Kelbl, M.; Kocis, T.; Návrat, T.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier
grade
Preferred source (of 2)‎

Coupled real-time thermo-mechanical solidification model of continuously cast steel

METAL 2019 - 28th International Conference on Metallurgy and Materials, Conference Proceedings
2019 | Conference paper
EID:

2-s2.0-85079414623
Contributors: Březina, M.; Mauder, T.; Klimeš, L.; Štětina, J.; Návrat, T.; Petruška, J.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier

COUPLED REAL-TIME THERMO-MECHANICAL SOLIDIFICATION MODEL OF CONTINUOUSLY CAST STEEL

International Conference on Metallurgy and Materials (Metal)
2019 | Journal article
DOI: 10.37904/METAL.2019.791
WOSUID: WOS:000539487400017
Contributors: Brezina, Michal; Mauder, Tomas; Klimes, Lubomir; Stetina, Josef; Navrat, Tomas; Petruska, Jindrich
Source: check_circle
Web of Science Researcher Profile Sync

Ductile failure predictions for the three-point bending test of a complex geometry made from aluminum alloy

Journal of Engineering Materials and Technology, Transactions of the ASME
2019 | Journal article
DOI: 10.1115/1.4044477
EID:

2-s2.0-85098875482

Part of ISSN: 15288889 00944289
Contributors: Kubık, P.; Šebek, F.; Zapletal, J.; Petruška, J.; Návrat, T.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier
grade
Preferred source (of 2)‎

Experimental FEM validation of the composite recurve bow

EXPERIMENTAL STRESS ANALYSIS (EAN)
2019 | Journal article
WOSUID: WOS:000568113800074
Contributors: Slama, David; Navrat, Tomas; Krejci, Petr
Source: check_circle
Web of Science Researcher Profile Sync

Experimental FEM validation of the composite recurve bow

Experimental Stress Analysis - 57th International Scientific Conference, EAN 2019 - Conference Proceedings
2019 | Conference paper
EID:

2-s2.0-85071246385
Contributors: Slama, D.; Navrat, T.; Krejci, P.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier

Eccentricity effect in the hole-drilling residual stress measurement

Defect and Diffusion Forum
2018 | Journal article
DOI: 10.4028/www.scientific.net/DDF.382.208
EID:

2-s2.0-85042519049
Contributors: Navrat, T.; Halabuk, D.; Vlk, M.; Vosynek, P.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier

Evaluation of mechanical behavior of 3D printed lattice structure by SLM: Experiment and FEA

Experimental Stress Analysis - 56th International Scientific Conference, EAN 2018 - Conference Proceedings
2018 | Conference paper
EID:

2-s2.0-85050961412
Contributors: Vrána, R.; Vosynek, P.; Koutný, D.; Návrat, T.; Paloušek, D.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier

Influence of Process Parameters of Printing on Mechanical Properties of Plastic Parts Produced by FDM 3D Printing Technology

MATEC Web of Conferences
2018 | Conference paper
DOI: 10.1051/matecconf/201823702014
EID:

2-s2.0-85058696476
Contributors: Vosynek, P.; Navrat, T.; Krejbychova, A.; Palousek, D.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier

Residual Stresses in Railway Axles

SHAPE MEMORY ALLOYS, SMA
2018 | Conference paper
DOI: 10.21741/9781945291890-16
WOSUID: WOS:000451793600016
Contributors: Bohuslav, Reha; Jaroslav, Vaclavik; Tomas, Navrat; Halabuk, David
Source: check_circle
Web of Science Researcher Profile Sync

The effect of third principal stress in the measurement of residual stresses by hole-drilling method

MATEC Web of Conferences
2018 | Conference paper
DOI: 10.1051/matecconf/201823701012
EID:

2-s2.0-85058692850
Contributors: Halabuk, D.; Navrat, T.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier

Thermomechanical assessment of fuel rod cladding made of zirconium alloy and silicon carbide material during reactivity-initiated accident

Nuclear Science and Engineering
2018 | Journal article
DOI: 10.1080/00295639.2017.1373518
EID:

2-s2.0-85036618658
Contributors: Halabuk, D.; Navrat, T.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier
grade
Preferred source (of 2)‎

Implementation of American weld connection standards into finite element computations

IOP Conference Series: Materials Science and Engineering
2017 | Conference paper
DOI: 10.1088/1757-899X/179/1/012056
EID:

2-s2.0-85016452677
Contributors: Peč, M.; Vosynek, P.; Šebek, F.; Návrat, T.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier
grade
Preferred source (of 2)‎

The issue of recommended hole diameters in ASTM E837-13a

EAN 2017 - 55th Conference on Experimental Stress Analysis 2017
2017 | Conference paper
EID:

2-s2.0-85026285091
Contributors: Halabuk, D.; Návrat, T.; Vlk, M.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier

VERIFICATION OF FAST ALGORITHM FOR CROSS-ROLL STRAIGHTENING

ENGINEERING MECHANICS PROCEEDINGS, VOL 24
2017 | Journal article
WOSUID: WOS:000411657600023
Contributors: Benesovsky, M.; Navrat, T.; Petruska, J.
Source: check_circle
Web of Science Researcher Profile Sync

MODELING OF THE BLAST LOAD EFFECTS IN EXPLICIT DYNAMICS

Engineering Mechanics
2016 | Conference paper
WOSUID: WOS:000379986700107
Contributors: Pec, M.; Kubik, P.; Sebek, F.; Navrat, T.; Petruska, J.
Source: check_circle
Web of Science Researcher Profile Sync

Novel approach to computational simulation of cross roll straightening of bars

Journal of Materials Processing Technology
2016 | Journal article
DOI: 10.1016/j.jmatprotec.2016.02.004
EID:

2-s2.0-84958950455
Contributors: Petruška, J.; Návrat, T.; Šebek, F.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier
grade
Preferred source (of 2)‎

Optimal intermeshing of multi roller cross roll straightening machine

AIP Conference Proceedings
2016 | Conference paper
DOI: 10.1063/1.4963517
EID:

2-s2.0-84994157373
Contributors: Petruška, J.; Návrat, T.; Šebek, F.; Benešovský, M.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier
grade
Preferred source (of 2)‎

Biomechanical testing of spinal segment fixed by arcofix system on the swine Spine

Asian Spine Journal
2015 | Journal article
DOI: 10.4184/asj.2015.9.4.503
EID:

2-s2.0-84946412836
Contributors: Kelbl, M.; Kocis, J.; Vesely, R.; Florian, Z.; Navrat, T.; Vosynek, P.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier
grade
Preferred source (of 2)‎

Optimization of leveling process by a fast simulation algorithm

INTERNATIONAL CONFERENCE ON MANUFACTURING ENGINEERING AND TECHNOLOGY FOR MANUFACTURING GROWTH (METMG)
2015 | Journal article
WOSUID: WOS:000380581800022
Contributors: Petruska, J.; Navrat, T.
Source: check_circle
Web of Science Researcher Profile Sync

BIOMECHANICAL TESTING OF SPINAL SEGMENT FIXED BY ARCOFIX SYSTEM

ENGINEERING MECHANICS PROCEEDINGS, VOL 24
2014 | Journal article
WOSUID: WOS:000364573900099
Contributors: Navrat, T.; Florian, Z.; Kocis, J.; Vosynek, P.
Source: check_circle
Web of Science Researcher Profile Sync

Effect of contact condition on film thickness formation in artificial joints

Mechatronics 2013: Recent Technological and Scientific Advances
2014 | Conference paper
DOI: 10.1007/978-3-319-02294-9-109
EID:

2-s2.0-84903760109
Contributors: Návrat, T.; Vrbka, M.; Laštuvka, J.; Křupka, I.; Hartl, M.; Gallo, J.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier

Effect of Contact Condition on Film Thickness Formation in Artificial Joints

Mechatronics: Recent Technological and Scientific Advances
2014 | Journal article
DOI: 10.1007/978-3-319-02294-9_109
WOSUID: WOS:000345341700109
Contributors: Navrat, T.; Vrbka, M.; Lastuvka, J.; Krupka, I.; Hartl, M.; Gallo, J.
Source: check_circle
Web of Science Researcher Profile Sync

Eulerian description of rail straightening process

Applied Mechanics and Materials
2014 | Book
DOI: 10.4028/www.scientific.net/AMM.624.213
EID:

2-s2.0-84906987365
Contributors: Navrat, T.; Petruska, J.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier
grade
Preferred source (of 2)‎

In situ measurements of thin films in bovine serum lubricated contacts using optical interferometry

Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine
2014 | Journal article
DOI: 10.1177/0954411913517498
EID:

2-s2.0-84896756899
Contributors: Vrbka, M.; Křupka, I.; Hartl, M.; Návrat, T.; Gallo, J.; Galandáková, A.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier
grade
Preferred source (of 2)‎

Pilot study of the wrist orthosis design process

Rapid Prototyping Journal
2014 | Journal article
DOI: 10.1108/RPJ-03-2012-0027
EID:

2-s2.0-84892375513
Contributors: Palousek, D.; Rosicky, J.; Koutny, D.; Stoklásek, P.; Navrat, T.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier
grade
Preferred source (of 2)‎

Review of pressurized vessel structural design - An assessment of total life

Applied Mechanics and Materials
2014 | Book
DOI: 10.4028/www.scientific.net/AMM.624.218
EID:

2-s2.0-84906968920
Contributors: Vosynek, P.; Vlk, M.; Návrat, T.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier
grade
Preferred source (of 2)‎

Computational simulation of cross roll straightening

ECCOMAS Special Interest Conference - SEECCM 2013: 3rd South-East European Conference on Computational Mechanics, Proceedings - An IACM Special Interest Conference
2013 | Conference paper
EID:

2-s2.0-84899510716
Contributors: Petruska, J.; Navrat, T.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier

Study of film formation in bovine serum lubricated contacts under rolling/sliding conditions

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
2013 | Journal article
DOI: 10.1177/1350650112471000
EID:

2-s2.0-84879203309
Contributors: Vrbka, M.; Navrat, T.; Krupka, I.; Hartl, M.; Sperka, P.; Gallo, J.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier
grade
Preferred source (of 2)‎

What Should an Orthopaedic Surgeon Know about Biotribology of Total Hip Arthroplasty

Acta Chirurgiae Orthopaedicae et Traumatologiae Cechoslovaca
2013 | Journal article
WOSUID: WOS:000329549900002
Contributors: Gallo, J.; Hartl, M.; Vrbka, M.; Navrat, T.; Krupka, I.
Source: check_circle
Web of Science Researcher Profile Sync

What should an orthopaedic surgeon know about biotribology of total hip arthroplasty,Co by měl vědět ortoped o biotribologii totální endoprotézy kyčelního kloubu

Acta Chirurgiae Orthopaedicae et Traumatologiae Cechoslovaca
2013 | Journal article
EID:

2-s2.0-84892970800
Contributors: Gallo, J.; Hartl, M.; Vrbka, M.; Návrat, T.; Křupka, I.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier

A new model for fast analysis of leveling process

Advanced Materials Research
2012 | Book
DOI: 10.4028/www.scientific.net/AMR.586.389
EID:

2-s2.0-84978116631
Contributors: Petruška, J.; Navrat, T.; Sebek, F.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier
grade
Preferred source (of 2)‎

Effect of proteins on film formation in bovine serum lubricated contacts under rolling/sliding conditions

American Society of Mechanical Engineers, Tribology Division, TRIB
2012 | Conference paper
DOI: 10.1115/IJTC2012-61089
EID:

2-s2.0-84882434860
Contributors: Vrbka, M.; Navrat, T.; Krupka, I.; Hartl, M.; Gallo, J.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier
grade
Preferred source (of 2)‎

Effect of slide-to-roll ratio on film thickness formation in bovine serum lubricated contact

EAN 2012: Proceedings of the 50th Annual Conference on Experimental Stress Analysis
2012 | Conference paper
EID:

2-s2.0-84907342261
Contributors: Laštůvka, J.; Bosák, D.; Návrat, T.; Vrbka, M.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier

Effect of Slide-to-roll Ratio on Film Thickness Formation in Bovine Serum Lubricated Contact

Proceedings of the Annual Conference on Experimental Stress Analysis
2012 | Journal article
WOSUID: WOS:000314083900037
Contributors: Lastuvka, Jan; Bosak, Dalibor; Navrat, Tomas; Vrbka, Martin
Source: check_circle
Web of Science Researcher Profile Sync

Finite element analysis for the evaluation of the structural behaviour, of a prosthesis for trans-tibial amputees

Medical Engineering and Physics
2012 | Journal article
DOI: 10.1016/j.medengphy.2011.06.014
EID:

2-s2.0-84855820996
Contributors: Omasta, M.; Paloušek, D.; Návrat, T.; Rosický, J.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier
grade
Preferred source (of 2)‎

A biomechanical study of a suture between the deltoid muscle and a free tendon graft for reconstruction of the elbow extension

Biomedical Papers
2011 | Journal article
DOI: 10.5507/bp.2011.011
EID:

2-s2.0-79954529929
Contributors: Cizmar, I.; Florian, Z.; Navrat, T.; Palousek, D.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier
grade
Preferred source (of 2)‎

A comparative analysis of socon CS and socon pedicle screws in view of their use for treatment of osteoporotic fractures of the thoracolumbal Spine. a biomechanical study,Srovnávací analýza šroubů socon CS a socon v ošetření osteoporotických zlomenin torakolumbální páteře - biomechanická studie

Acta Chirurgiae Orthopaedicae et Traumatologiae Cechoslovaca
2011 | Journal article
EID:

2-s2.0-80051984843
Contributors: Janů, I.; Kočiš, J.; Návrat, T.; Florian, Z.; Wendsche, P.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier

Accuracy testing of the DIC optical measuring method the ARAMIS system by GOM

EAN 2011: 49th International Scientific Conference on Experimental Stress Analysis
2011 | Conference paper
EID:

2-s2.0-84905505162
Contributors: Janíček, P.; Blažo, M.; Navrátil, P.; Návrat, T.; Vosynek, P.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier

Accuracy Testing of the DIC Optical Measuring Method the ARAMIS System by GOM

Experimentalni Analyza Napeti - Experimental Stress Analysis
2011 | Journal article
WOSUID: WOS:000394059400021
Contributors: Janicek, Premysl; Blazo, Marek; Navratil, Petr; Navrat, Tomas; Vosynek, Petr
Source: check_circle
Web of Science Researcher Profile Sync

Design of experimental device for loading the femur when standing on one leg

EAN 2011: 49th International Scientific Conference on Experimental Stress Analysis
2011 | Conference paper
EID:

2-s2.0-84905460354
Contributors: Vosynek, P.; Návrat, T.; Krejčí, P.; Houfek, L.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier

Design of Experimental Device for Loading the Femur When Standing on One Leg

Experimentalni Analyza Napeti - Experimental Stress Analysis
2011 | Journal article
WOSUID: WOS:000394059400063
Contributors: Vosynek, Petr; Navrat, Tomas; Krejci, Petr; Houfek, Lubomir
Source: check_circle
Web of Science Researcher Profile Sync

Effect of shot peening on rolling contact fatigue and lubricant film thickness within mixed lubricated non-conformal rolling/sliding contacts

Tribology International
2011 | Journal article
DOI: 10.1016/j.triboint.2011.06.019
EID:

2-s2.0-80055074480
Contributors: Vrbka, M.; Křupka, I.; Svoboda, P.; Šperka, P.; Návrat, T.; Hartl, M.; Nohava, J.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier
grade
Preferred source (of 2)‎

Analyses of the shape deviations of the contact cones of the total hip joint endoprostheses

IFMBE Proceedings
2010 | Conference paper
DOI: 10.1007/978-3-642-14515-5_370
EID:

2-s2.0-77957991334
Contributors: Fuis, V.; Návrat, T.; Vosynek, P.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier
grade
Preferred source (of 2)‎

Analysis of the influence of lumbosacral fusion on the adjacent moving segment

IFMBE Proceedings
2010 | Conference paper
DOI: 10.1007/978-3-642-14515-5_206
EID:

2-s2.0-77958002518
Contributors: Návrat, T.; Ženčica, P.; Pánis, V.; Vosynek, P.; Fuis, V.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier
grade
Preferred source (of 2)‎

BIOMECHANICAL TESTING OF SPINAL SEGMENT FIXED BY THORACOLUMBAR SPINE LOCKING PLATE ON THE SWINE LUMBAR SPINE

Biomedical Papers of the Medical Faculty of the University Palacky, Olomouc, Czechoslovakia
2010 | Journal article
DOI: 10.5507/BP.2010.052
WOSUID: WOS:000285643800012
Contributors: Kocis, Jan; Navrat, Tomas; Florian, Zdenek; Wendsche, Peter
Source: check_circle
Web of Science Researcher Profile Sync

Comparison of the resistance to bending forces of the 4.5 LCP plate-rod construct and of 4.5 LCP alone applied to segmental femoral defects in miniature pigs,Srovnání odolnosti proti pusobení sil ohybu 4,5 LCP v konstrukci plate and rod a samotné 4,5 LCP použitých k fixaci segmentálních defektu femuru u miniaturních prasat

Acta Veterinaria Brno
2010 | Journal article
DOI: 10.2754/avb201079040613
EID:

2-s2.0-79952217460
Contributors: Urbanová, L.; Srnec, R.; Proks, P.; Stehlík, L.; Florian, Z.; Návrat, T.; Nečas, A.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier
grade
Preferred source (of 2)‎

Effect of surface texturing on rolling contact fatigue within mixed lubricated non-conformal rolling/sliding contacts

Tribology International
2010 | Journal article
DOI: 10.1016/j.triboint.2010.02.002
EID:

2-s2.0-77953292884
Contributors: Vrbka, M.; Šamánek, O.; Šperka, P.; Návrat, T.; Křupka, I.; Hartl, M.
Source: Self-asserted source
Tomáš Návrat via Scopus - Elsevier
grade
Preferred source (of 2)‎
Items per page:
Page 1 of 2
How many people are using ORCID?