Personal information

Other IDs

ResearcherID: L-1951-2014
Scopus Author ID: 25959105100

Activities

Collapse all

Works (50 of 56)

Items per page:
Page 1 of 2

The Influence of the Gap Phenomenon on the Occurrence of Consecutive Discharges in WEDM Through High-Speed Video Camera Observation

Applied Sciences
2024-10-17 | Journal article
DOI: 10.3390/app14209475
Contributors: Jun Wang; José Antonio Sánchez; Borja Izquierdo; Izaro Ayesta
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

DEVELOPING EDUCATIONAL VIDEOS FOR THE GRINDING INDUSTRY: METHODOLOGICAL APPROACH AND PRACTICAL APPLICATION

2024-07 | Conference paper
DOI: 10.21125/edulearn.2024.0333
Contributors: Leire Godino Fernandez; Iñigo Pombo Rodilla; Jose Antonio Sanchez Galindez; Unai Alonso Pinillos; Borja Izquierdo Aramburu
Source: check_circle
Crossref

Wear of Abrasive Tools during CMC Machining

Machines
2023-11-13 | Journal article
DOI: 10.3390/machines11111021
Contributors: Franck Andrés Girot Mata; Mario Alfredo Renderos Cartagena; Unai Alonso Pinillos; Borja Izquierdo Aramburu
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

PROJECT BASED LEARNING FOR IMPROVING UNIVERSITY ACADEMIC PERFORMANCE IN ENGINEERING: APPLICATION TO PRODUCTION AND MANUFACTURING SYSTEMS

2021-07 | Conference paper
DOI: 10.21125/edulearn.2021.0897
Contributors: Leire Godino Fernández; Iñigo Pombo; Borja Izquierdo; Jose Antonio Sanchez
Source: check_circle
Crossref

Characterization of vitrified alumina grinding wheel topography using 3D roughness parameters: influence of the crystalline structure of abrasive grains

The International Journal of Advanced Manufacturing Technology
2021-03-10 | Journal article
DOI: 10.1007/s00170-021-06721-3
Contributors: Leire Godino; Iñigo Pombo; Jose Antonio Sanchez; Borja Izquierdo
Source: check_circle
Crossref

Experimental and numerical study of crater volume in wire electrical discharge machining

Materials
2020 | Journal article
DOI: 10.3390/ma13030577
OTHER-ID:

UPV/EHU:5072910
Contributors: Wang,J.; Sanchez,J. A.; Izquierdo,B.; Ayesta,I.
Source: check_circle
Universidad del País Vasco

Observations on debris composition and size distribution in WEDM

Procedia CIRP
2020 | Conference paper
DOI: 10.1016/j.procir.2020.02.323
OTHER-ID:

UPV/EHU:5072911
Contributors: Wang,J.; Sánchez,J. A.; Wang,Z.; Izquierdo,B.; Ayesta,I.
Source: check_circle
Universidad del País Vasco

Implicit Subspace Iteration to Improve the Stability Analysis in Grinding Processes

Applied Sciences
2020-11 | Journal article | Author
DOI: 10.3390/app10228203
Contributors: Jorge Alvarez; Mikel Zatarain; David Barrenetxea; Jose Ignacio Marquinez; Borja Izquierdo
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎

Influence of AISI D2 Workpiece Roughness on Heat Partition and Plasma Channel Radius in the WEDM Process

Metals
2020-10 | Journal article | Author
DOI: 10.3390/met10101360
Contributors: Jun Wang; Jose A. Sanchez; Borja Izquierdo; Izaro Ayesta
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎

Experimental Study on the Influence of Electrode Geometry and Electrode Path on Wear Pattern in EDM

Procedia CIRP / 19th CIRP Conference on Electro Physical and Chemical Machining, 23-27 April 2017, Bilbao, Spain
2018 | Conference paper
DOI: 10.1016/j.procir.2017.12.103
Contributors: Flaño, O.; Ayesta, I.; Izquierdo, B.; Sánchez, J.A.; Ramos, J.M.
Source: check_circle
Universidad del País Vasco

Study of Interpolation Strategies to Dress Electrodes by Means of EDM

Procedia CIRP / 19th CIRP Conference on Electro Physical and Chemical Machining, 23-27 April 2017, Bilbao, Spain
2018 | Conference paper
DOI: 10.1016/j.procir.2017.12.101
Contributors: Bravo, H.; Ayesta, I.; Sanchez, J.A.; Zamakona, I.; Izquierdo, B.; Flaño, O.; del Campo, J.
Source: check_circle
Universidad del País Vasco

An Original Tribometer to Analyze the Behavior of Abrasive Grains in the Grinding Process

Metals
2018-07 | Journal article
DOI: 10.3390/met8070557
Contributors: Godino, Leire; Pombo, Iñigo; Sanchez, Jose; Izquierdo, Borja
Source: check_circle
Universidad del País Vasco

Improvement of EDM performance in high-aspect ratio slot machining using multi-holed electrodes

Precision Engineering
2018-01 | Journal article
DOI: 10.1016/j.precisioneng.2017.08.014
Contributors: Flaño, O.; Ayesta, I.; Izquierdo, B.; Sánchez, J.A.; Zhao, Y.; Kunieda, M.
Source: check_circle
Universidad del País Vasco

Echando chispas, tecnologías con futuro

Metalindustria
2017 | Journal article
OTHER-ID:

https://dialnet.unirioja.es/servlet/extart?codigo=5804894
Contributors: Flaño Alaña, Olatz; Pereira Neto, Octavio Manuel; Ayesta Rementeria, Izaro; Izquierdo Aramburu, Borja; Sánchez Galíndez, José Antonio; López de Lacalle Marcaide, L. N.
Source: check_circle
Universidad del País Vasco

Experimental Study on Debris Evacuation during Slot EDMing

Procedia CIRP
2016 | Conference paper
DOI: 10.1016/j.procir.2016.02.174
EID:

2-s2.0-84966668381
Contributors: Ayesta, I.; Flaño, O.; Izquierdo, B.; Sanchez, J.A.; Plaza, S.
Source: Self-asserted source
Borja Izquierdo via Scopus - Elsevier

Influence of the WEDM process on the fatigue behavior of Inconel® 718

International Journal of Fatigue
2016 | Journal article
DOI: 10.1016/j.ijfatigue.2016.07.011
EID:

2-s2.0-84978946954
Contributors: Ayesta, I.; Izquierdo, B.; Flaño, O.; Sánchez, J.A.; Albizuri, J.; Avilés, R.
Source: Self-asserted source
Borja Izquierdo via Scopus - Elsevier

Modelling of the hardening and finishing stages of grind-hardened workpieces

International Journal of Advanced Manufacturing Technology
2016 | Journal article
DOI: 10.1007/s00170-015-7378-6
EID:

2-s2.0-84953840242
Contributors: Ortega, N.; Alonso, U.; Sánchez, J.A.; Pombo, I.; Plaza, S.; Izquierdo, B.
Source: Self-asserted source
Borja Izquierdo via Scopus - Elsevier

Optimum electrode path generation for EDM manufacturing of aerospace components

Robotics and Computer-Integrated Manufacturing
2016 | Journal article
DOI: 10.1016/j.rcim.2015.04.003
EID:

2-s2.0-84943815563
Contributors: Ayesta, I.; Izquierdo, B.; Sanchez, J.A.; Ramos, J.M.; Plaza, S.; Pombo, I.; Ortega, N.
Source: Self-asserted source
Borja Izquierdo via Scopus - Elsevier

Hardness control of grind-hardening and finishing grinding by means of area-based specific energy

International Journal of Machine Tools and Manufacture
2015 | Journal article
DOI: 10.1016/j.ijmachtools.2014.09.001
EID:

2-s2.0-84907646944
Contributors: Alonso, U.; Ortega, N.; Sanchez, J.A.; Pombo, I.; Izquierdo, B.; Plaza, S.
Source: Self-asserted source
Borja Izquierdo via Scopus - Elsevier

Caracterización del proceso de descarga en electroerosión

IMHE: Información de máquinas-herramienta, equipos y accesorios
2014 | Journal article
OTHER-ID:

https://dialnet.unirioja.es/servlet/extart?codigo=4901589
Contributors: Izquierdo Aramburu, Borja; Sánchez Galíndez, José Antonio; Plaza Pascual, María Soraya; Ortega Rodríguez, Naiara; Pombo Rodilla, Iñigo
Source: check_circle
Universidad del País Vasco

Experimental study on micro EDM-drilling of Ti6Al4V using helical electrode

Precision Engineering
2014 | Journal article
DOI: 10.1016/j.precisioneng.2014.04.010
EID:

2-s2.0-84905118156
Contributors: Plaza, S.; Sanchez, J.A.; Perez, E.; Gil, R.; Izquierdo, B.; Ortega, N.; Pombo, I.
Source: Self-asserted source
Borja Izquierdo via Scopus - Elsevier

In-process prediction of the hardened layer in cylindrical traverse grind-hardening

International Journal of Advanced Manufacturing Technology
2014 | Journal article
DOI: 10.1007/s00170-013-5395-x
Contributors: Alonso, Unai; Ortega, Naiara; Antonio Sanchez, Jose; Pombo, Inigo; Plaza, Soraya; Izquierdo, Borja
Source: Self-asserted source
Borja Izquierdo via ResearcherID
grade
Preferred source (of 2)‎

Modeling recast layer and surface finish in the manufacturing of high-aspect ratio micro-tools using the inverse slab electrical discharge milling process

Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture
2014 | Journal article
DOI: 10.1177/0954405413502024
Contributors: Gil, R.; Sanchez, Jose A.; Plaza, S.; Ortega, N.; Izquierdo, B.; Pombo, I.
Source: Self-asserted source
Borja Izquierdo via ResearcherID
grade
Preferred source (of 2)‎

Por un rectificado ecológico

IMHE: Información de máquinas-herramienta, equipos y accesorios
2014 | Journal article
OTHER-ID:

https://dialnet.unirioja.es/servlet/extart?codigo=4914422
Contributors: Pombo Rodilla, Iñigo; Alberdi, Raúl; Sánchez Galíndez, José Antonio; Izquierdo Aramburu, Borja; Ortega Rodríguez, Naiara
Source: check_circle
Universidad del País Vasco

Electrode set-up for EDM-drilling of large aspect-ratio microholes

Proceedings of the Seventeenth Cirp Conference on Electro Physical and Chemical Machining
2013 | Book chapter
DOI: 10.1016/j.procir.2013.03.009
Contributors: Sanchez, J. A.; Plaza, S.; Gil, R.; Ramos, J. M.; Izquierdo, B.; Ortega, N.; Pombo, I.
Source: Self-asserted source
Borja Izquierdo via ResearcherID
grade
Preferred source (of 2)‎

Evaluation of friction and wear effects during the abrasive contact between Al2O3-hardened steel

Proceedings of the 5th Manufacturing Engineering Society International Conference – Zaragoza – June 2013
2013 | Conference paper
OTHER-ID:

UPV/EHU:5040121
Contributors: Garcia,E.; Sánchez,J. A:; Pombo,I.; Dubar,L.; Dubar,M.; Dubois,A.; Ortega,N.; Izquierdo,B.; Plaza,S.; Meresse,D. et al.
Source: check_circle
Universidad del País Vasco

High-aspect ratio micro-pin manufacturing using inverse slab electrical discharge milling (ISEDM) process

International Journal of Advanced Manufacturing Technology
2013 | Journal article
DOI: 10.1007/s00170-012-4270-5
Contributors: Gil, R.; Sanchez, J. A.; Ortega, N.; Plaza, S.; Izquierdo, B.; Pombo, I.
Source: Self-asserted source
Borja Izquierdo via ResearcherID
grade
Preferred source (of 2)‎

Influence of EDM parameters on slot machining in C1023 aeronautical alloy

Proceedings of the Seventeenth Cirp Conference on Electro Physical and Chemical Machining
2013 | Book chapter
DOI: 10.1016/j.procir.2013.03.059
Contributors: Ayesta, I.; Izquierdo, B.; Sanchez, J. A.; Ramos, J. M.; Plaza, S.; Pombo, I.; Ortega, N.; Bravo, H.; Fradejas, R.; Zamakona, I.
Source: Self-asserted source
Borja Izquierdo via ResearcherID
grade
Preferred source (of 2)‎

Reduction of oil and gas consumption in grinding technology using high pour-point lubricants

Journal of Cleaner Production
2013 | Journal article
DOI: 10.1016/j.jclepro.2013.01.037
Contributors: Garcia, Eduardo; Pombo, Inigo; Antonio Sanchez, Jose; Ortega, Naiara; Izquierdo, Borja; Plaza, Soraya; Ignacio Marquinez, Jose; Heinzel, Carsten; Mourek, Daniel
Source: Self-asserted source
Borja Izquierdo via ResearcherID
grade
Preferred source (of 2)‎

Analysis of micro-pin manufacturing using Inverse Slab Electrical Discharge Milling (ISEDM) process

Precision Machining Vi
2012 | Book chapter
DOI: 10.4028/www.scientific.net/KEM.496.247
Contributors: Gil, R.; Sanchez, J. A.; Ortega, N.; Plaza, S.; Izquierdo, B.; Pombo, I.
Source: Self-asserted source
Borja Izquierdo via ResearcherID
grade
Preferred source (of 2)‎

Contact length estimation in grinding using thermocouple measurement and numerical simulation

International Journal of Advanced Manufacturing Technology
2012 | Journal article
DOI: 10.1007/s00170-011-3474-4
Contributors: Pombo, Inigo; Antonio Sanchez, Jose; Ortega, Naiara; Ignacio Marquinez, Jose; Izquierdo, Borja; Plaza, Soraya
Source: Self-asserted source
Borja Izquierdo via ResearcherID
grade
Preferred source (of 2)‎

Estudio de la forma de la fuente de calor en un modelo FEM 3D para rectificado cilíndrico

Anales de ingeniería mecánica
2012 | Journal article
OTHER-ID:

UPV/EHU:5040120
Contributors: Alonso,U.; Ortega,N.; Sánchez,J. A.; Pombo,I.; Plaza,S.; Izquierdo,B.
Source: check_circle
Universidad del País Vasco

Industrial application of the MCG (Minimum Coolant Grinding) technology

Advances in Abrasive Technology Xv
2012 | Book chapter
DOI: 10.4028/www.scientific.net/AMR.565.117
Contributors: Pombo, I.; Sanchez, J. A.; Garcia, E.; Ortega, N.; Izquierdo, B.; Plaza, S.
Source: Self-asserted source
Borja Izquierdo via ResearcherID
grade
Preferred source (of 2)‎

New Technologies for Increasing the Capacities of WEDM Machines

Advances in Non Conventional Materials Processing Technologies
2012 | Book chapter
DOI: 10.4028/www.scientific.net/MSF.713.97
Contributors: Sanchez, J. A.; Plaza, S.; Ramos, J. M.; Izquierdo, B.; Ortega, N.; Pombo, I.
Source: Self-asserted source
Borja Izquierdo via ResearcherID
grade
Preferred source (of 2)‎

Numerical prediction of heat affected layer in the EDM of aeronautical alloys

Applied Surface Science
2012 | Journal article
DOI: 10.1016/j.apsusc.2012.07.124
Contributors: Izquierdo, B.; Plaza, S.; Sanchez, J. A.; Pombo, I.; Ortega, N.
Source: Self-asserted source
Borja Izquierdo via ResearcherID
grade
Preferred source (of 2)‎

Two FEM Thermal Models for Shallow and Deep Grinding

Advances in Non Conventional Materials Processing Technologies
2012 | Book chapter
DOI: 10.4028/www.scientific.net/MSF.713.145
Contributors: Ortega, N.; Pombo, I.; Alonso, U.; Sanchez, J. A.; Izquierdo, B.; Plaza, S.
Source: Self-asserted source
Borja Izquierdo via ResearcherID
grade
Preferred source (of 2)‎

About the importance of simulation tools in the learning process of metal forming and moulding

New Frontiers in Materials Processing Training and Learning Ii
2011 | Book chapter
DOI: 10.4028/www.scientific.net/MSF.692.1
Contributors: Plaza, S.; Ortega, M.; Celaya, A.; Sanchez, J. A.; Lopez de Lacalle, L. N.; Izquierdo, B.
Source: Self-asserted source
Borja Izquierdo via ResearcherID
grade
Preferred source (of 2)‎

Analysis of EDD accuracy for profiling metal-bonded grinding wheels

Advances in Abrasive Technology Xiv
2011 | Book chapter
DOI: 10.4028/www.scientific.net/AMR.325.195
Contributors: Ortega, N.; Pombo, I.; Sanchez, J. A.; Plaza, S.; Izquierdo, B.
Source: Self-asserted source
Borja Izquierdo via ResearcherID
grade
Preferred source (of 2)‎

Characterization of the Response of Embedded Thermocouples in Grinding

Advances in Abrasive Technology Xiv
2011 | Book chapter
DOI: 10.4028/www.scientific.net/AMR.325.12
Contributors: Pombo, I.; Sanchez, J. A.; Ortega, N.; Izquierdo, B.; Plaza, S.
Source: Self-asserted source
Borja Izquierdo via ResearcherID
grade
Preferred source (of 2)‎

Fabricación de alto rendimiento rectificado

2011 | Book
OTHER-ID:

UPV/EHU:5053940
Contributors: Pombo Rodilla,I.; Izquierdo Aranburu,Borja; Ortega Rodríguez,Naiara; Plaza,S.; Sánchez Galíndez,José Antonio
Source: check_circle
Universidad del País Vasco

Insight into fundamental aspects of the EDM process using multidischarge numerical simulation

International Journal of Advanced Manufacturing Technology
2011 | Journal article
DOI: 10.1007/s00170-010-2709-0
Contributors: Izquierdo, Borja; Antonio Sanchez, Jose; Ortega, Naiara; Plaza, Soraya; Pombo, Inigo
Source: Self-asserted source
Borja Izquierdo via ResearcherID
grade
Preferred source (of 2)‎

Strategies for optimal use of fluids in grinding

International Journal of Machine Tools & Manufacture
2011 | Journal article
DOI: 10.1016/j.ijmachtools.2011.02.007
Contributors: Alberdi, R.; Sanchez, J. A.; Pombo, I.; Ortega, N.; Izquierdo, B.; Plaza, S.; Barrenetxea, D.
Source: Self-asserted source
Borja Izquierdo via ResearcherID
grade
Preferred source (of 2)‎

An integrated approach to teach manufacturing engineering as per new european higher education area framework

EDULEARN10 Proceedings / 2nd International Conference on Education and New Learning Technologie, Barcelona, Spain, 5-7 July, 2010
2010 | Conference paper
OTHER-ID:

UPV/EHU:5040127
Contributors: Sanchez,J. A.; Plaza,S.; Ortega,N.; Pombo,I.; Izquierdo,B.; Lopez de Lacalle,L. N.
Source: check_circle
Universidad del País Vasco

Análisis del proceso de Electro Discharge Milling Inverso para la fabricación de microejes

XVIII Congreso Nacional de Ingeniería Mecánica CNIM 2010, Ciudad Real, 3-5 noviembre 2010
2010 | Conference paper
OTHER-ID:

UPV/EHU:5040122
Contributors: Gil,R.; Sánchez,J. A.; Ortega,N.; Plaza,S.; Izquierdo,B.; Pombo,I.; Herrero,J. A.
Source: check_circle
Universidad del País Vasco

Electrodischarge dressing (EDD) applied to contour grinding

International Journal of Mechatronics and Manufacturing Systems
2010 | Journal article
DOI: 10.1504/IJMMS.2010.036061
EID:

2-s2.0-77958460560
Contributors: Ortega, N.; Pombo, I.; Sanchez, J.A.; Izquierdo, B.; Plaza, S.; Alberdi, R.
Source: Self-asserted source
Borja Izquierdo via Scopus - Elsevier

Instrumentos de apoyo internacional a la I+D. VII Programa Marco de I+D 2007-2013

Hidrógeno y pilas de combustible: estado actual y perspectiva inmediata
2010 | Book chapter
OTHER-ID:

https://dialnet.unirioja.es/servlet/extart?codigo=3625315
Contributors: Serrano, Joaquín; Izquierdo Aramburu, Borja
Source: check_circle
Universidad del País Vasco

Machining evaluation of a hybrid MQL-CO2 grinding technology

Journal of Cleaner Production
2010 | Journal article
DOI: 10.1016/j.jclepro.2010.07.002
Contributors: Sanchez, J. A.; Pombo, I.; Alberdi, R.; Izquierdo, B.; Ortega, N.; Plaza, S.; Martinez-Toledano, J.
Source: Self-asserted source
Borja Izquierdo via ResearcherID
grade
Preferred source (of 2)‎

Modelización numérica del problema térmico en micro-WEDM

Anales de ingeniería mecánica
2010 | Journal article
OTHER-ID:

UPV/EHU:5040123
Contributors: Herrero,A.; Aranzabe,E.; Cascón,I.; Sánchez,J. A.; Izquierdo,B.; Ortega,N.
Source: check_circle
Universidad del País Vasco

On the characterization of the heat input for thermal modelling of the EDM process

16th International Symposium on Electromachining, ISEM 2010
2010 | Conference paper
EID:

2-s2.0-84907336454
Contributors: Izquierdo, B.; Sánchez, J.A.; Plaza, S.; Ortega, N.; Pombo, I.
Source: Self-asserted source
Borja Izquierdo via Scopus - Elsevier

A numerical model of the EDM process considering the effect of multiple discharges

International Journal of Machine Tools & Manufacture
2009 | Journal article
DOI: 10.1016/j.ijmachtools.2008.11.003
Contributors: Izquierdo, B.; Sanchez, J. A.; Plaza, S.; Pombo, I.; Ortega, N.
Source: Self-asserted source
Borja Izquierdo via ResearcherID
grade
Preferred source (of 2)‎
Items per page:
Page 1 of 2
How many people are using ORCID?