Personal information

Other IDs

Scopus Author ID: 57210096811

Activities

Collapse all

Employment (1)

Universidad de Las Palmas de Gran Canaria - Campus de Tafira: Las Palmas de Gran Canaria, Islas Canarias, ES

(Department of Process Engineering)
Employment
Source: Self-asserted source
Antonio Nizardo Benítez Vega

Education and qualifications (2)

Universidad de Las Palmas de Gran Canaria - Campus de Tafira: Las Palmas de Gran Canaria, Islas Canarias, ES

Industrial Engineering
Education
Source: Self-asserted source
Antonio Nizardo Benítez Vega

Universidad de Las Palmas de Gran Canaria: Las Palmas de Gran Canaria, Islas Canarias, ES

2005-09-15 to present | Doctor at the Universidad de Las Palmas de Gran Canaria
Education
Source: Self-asserted source
Antonio Nizardo Benítez Vega

Works (50 of 52)

Items per page:
Page 1 of 2

Use of Ricinus communis shredded material as filler in rotational molded parts to improve the bio-disintegration behavior

Polymer Bulletin
2023-10 | Journal article
DOI: 10.1007/s00289-022-04593-5
Contributors: Francisco Romero; Zaida Ortega; Jessica Castellano; Antonio N. Benítez; María Dolores Marrero; Luis Suárez
Source: check_circle
Crossref

Valorization of Pennisetum setaceum: From Invasive Plant to Fiber Reinforcement of Injected Composites

Plants
2023-04-26 | Journal article
DOI: 10.3390/plants12091777
Contributors: Patricia Cabrera-García; María Dolores Marrero; Antonio Nizardo Benítez; Rubén Paz
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Assessment of the effect of autohydrolysis treatment in banana's pseudostem pulp

Waste Management
2021 | Journal article
DOI: 10.1016/j.wasman.2020.09.034
EID:

2-s2.0-85093661294

Part of ISSN: 18792456 0956053X
Contributors: Díaz, S.; Ortega, Z.; Benítez, A.N.; Costa, D.; Carvalheiro, F.; Fernandes, M.C.; Duarte, L.C.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Oligosaccharides production by enzymatic hydrolysis of banana pseudostem pulp

Biomass Conversion and Biorefinery
2021-10-28 | Journal article
DOI: 10.1007/s13399-021-02033-4
Part of ISSN: 2190-6815
Part of ISSN: 2190-6823
Source: Self-asserted source
Antonio Nizardo Benítez Vega

Optimization of banana crop by-products solvent extraction for the production of bioactive compounds

Biomass Conversion and Biorefinery
2021-07-09 | Journal article
DOI: 10.1007/s13399-021-01703-7
Part of ISSN: 2190-6815
Part of ISSN: 2190-6823
Source: Self-asserted source
Antonio Nizardo Benítez Vega

Valorization of Invasive Plants from Macaronesia as Filler Materials in the Production of Natural Fiber Composites by Rotational Molding

Polymers
2021-07-05 | Journal article
DOI: 10.3390/polym13132220
Contributors: Zaida Ortega; Francisco Romero; Rubén Paz; Luis Suárez; Antonio Nizardo Benítez; María Dolores Marrero
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Environmental Hazards of Giant Reed (Arundo donax L.) in the Macaronesia Region and Its Characterisation as a Potential Source for the Production of Natural Fibre Composites

Polymers
2021-06-25 | Journal article
DOI: 10.3390/polym13132101
Part of ISSN: 2073-4360
Source: Self-asserted source
Antonio Nizardo Benítez Vega

Opuntia spp. Fibre Characterisation to Obtain Sustainable Materials in the Composites Field

Polymers
2021-06-24 | Journal article
DOI: 10.3390/polym13132085
Part of ISSN: 2073-4360
Source: Self-asserted source
Antonio Nizardo Benítez Vega

Characterization of Agave americana L. plant as potential source of fibres for composites obtaining

SN Applied Sciences
2019 | Journal article
DOI: 10.1007/s42452-019-1022-2
EID:

2-s2.0-85089032873

Part of ISSN: 25233971
Contributors: Ortega, Z.; Castellano, J.; Suárez, L.; Paz, R.; Díaz, N.; Benítez, A.N.; Marrero, M.D.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Comparison of low-pressure oxygen plasma and chemical treatments for surface modifications of Ti6Al4V

Bio-Design and Manufacturing
2019 | Journal article
DOI: 10.1007/s42242-019-00036-9
EID:

2-s2.0-85062783960

Part of ISSN: 25228552 20965524
Contributors: Alemán-Domínguez, M.E.; Ortega, Z.; Benítez, A.N.; Romero-Pérez, A.; Wang, L.; Santana-Farré, R.; Rodríguez-Esparragón, F.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Three-dimensional printed polycaprolactone-microcrystalline cellulose scaffolds

Journal of Biomedical Materials Research - Part B Applied Biomaterials
2019 | Journal article
DOI: 10.1002/jbm.b.34142
EID:

2-s2.0-85046545465

Part of ISSN: 15524981 15524973
Contributors: Alemán-Domínguez, M.E.; Giusto, E.; Ortega, Z.; Tamaddon, M.; Benítez, A.N.; Liu, C.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Polycaprolactone–carboxymethyl cellulose composites for manufacturing porous scaffolds by material extrusion

Bio-Design and Manufacturing
2018 | Journal article
DOI: 10.1007/s42242-018-0024-z
EID:

2-s2.0-85062724136

Part of ISSN: 25228552 20965524
Contributors: Alemán-Domínguez, M.E.; Ortega, Z.; Benítez, A.N.; Monzón, M.; Garzón, L.V.; Ajami, S.; Liu, C.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Recycling of polymeric fraction of cable waste by rotational moulding

Waste Management
2018 | Journal article
DOI: 10.1016/j.wasman.2018.03.020
EID:

2-s2.0-85043462408

Part of ISSN: 18792456 0956053X
Contributors: Díaz, S.; Ortega, Z.; McCourt, M.; Kearns, M.P.; Benítez, A.N.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Tunability of polycaprolactone hydrophilicity by carboxymethyl cellulose loading

Journal of Applied Polymer Science
2018 | Journal article
DOI: 10.1002/app.46134
EID:

2-s2.0-85039158954

Part of ISSN: 10974628 00218995
Contributors: Alemán-Domínguez, M.E.; Ortega, Z.; Benítez, A.N.; Vilariño-Feltrer, G.; Gómez-Tejedor, J.A.; Vallés-Lluch, A.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Design and manufacture of structured surfaces by electroforming

Procedia Manufacturing
2017 | Journal article
DOI: 10.1016/j.promfg.2017.09.030
EID:

2-s2.0-85030861169

Part of ISSN: 23519789
Contributors: Hernández-Castellano, P.M.; Benítez-Vega, A.N.; Díaz-Padilla, N.; Ortega-García, F.; Socorro-Perdomo, P.; Marrero-Alemán, M.D.; Salguero, J.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Development of interactive learning materials in engineering of manufacturing processes

Materials Science Forum
2017 | Book
DOI: 10.4028/www.scientific.net/MSF.903.63
EID:

2-s2.0-85028998845

Part of ISSN: 16629752 02555476
Contributors: Hernández-Castellano, P.M.; Marrero-Alemán, M.D.; Aranda-Loureiro, A.M.; Ortega-García, F.; Paz-Hernández, R.; Benítez-Vega, A.N.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

New lightweight optimisation method applied in parts made by selective laser sintering and Polyjet technologies

International Journal of Computer Integrated Manufacturing
2016 | Journal article
DOI: 10.1080/0951192X.2015.1066033
EID:

2-s2.0-84958876985

Part of ISSN: 13623052 0951192X
Contributors: Paz, R.; Monzón, M.D.; Benítez, A.N.; González, B.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Nickel-copper electroforming process applied to rotational mould starting from additive manufacturing

Transactions of the Institute of Metal Finishing
2016 | Journal article
DOI: 10.1080/00202967.2016.1161882
EID:

2-s2.0-84966533837

Part of ISSN: 17459192 00202967
Contributors: Monzón, M.D.; Diaz, N.; Ortega, Z.; Paz, R.; Ortega, F.; Benítez, A.N.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Theoretical-experimental evaluation of different biomaterials for parts obtaining by fused deposition modeling

Measurement: Journal of the International Measurement Confederation
2016 | Journal article
DOI: 10.1016/j.measurement.2016.03.061
EID:

2-s2.0-84962920635

Part of ISSN: 02632241
Contributors: Ortega, Z.; Alemán, M.E.; Benítez, A.N.; Monzón, M.D.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Combination of electroforming and cold gas dynamic spray for fabrication of rotational moulds: feasibility study

International Journal of Advanced Manufacturing Technology
2015 | Journal article
DOI: 10.1007/s00170-014-6331-4
EID:

2-s2.0-84921951629

Part of ISSN: 14333015 02683768
Contributors: Ortega, F.; Sova, A.; Monzón, M.D.; Marrero, M.D.; Benítez, A.N.; Bertrand, P.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Computer cathodic orientation device: Functional properties of electroformed nickel shells

Materials and Manufacturing Processes
2015 | Journal article
DOI: 10.1080/10426914.2014.994773
EID:

2-s2.0-84928108005

Part of ISSN: 15322475 10426914
Contributors: Ortega, F.; Monzón, M.D.; Marrero, M.D.; Benítez, A.N.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Electroforming Applied to Manufacturing of Microcomponents

Procedia Engineering
2015 | Conference paper
DOI: 10.1016/j.proeng.2015.12.544
EID:

2-s2.0-84962910371

Part of ISSN: 18777058
Contributors: Hernández, P.; Campos, D.; Socorro, P.; Benítez, A.; Ortega, F.; Díaz, N.; Marrero, Ma.D.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Interactive Learning Tool in Product Development for Injection Moulding

Procedia Engineering
2015 | Conference paper
DOI: 10.1016/j.proeng.2015.12.470
EID:

2-s2.0-84962890438

Part of ISSN: 18777058
Contributors: Hernández, P.; Taboada, S.; Suárez, L.; Marrero, M.D.; Ortega, F.; Benítez, A.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Banana and abaca reinforced polyethylene composites microtensile video tests

16th European Conference on Composite Materials, ECCM 2014
2014 | Conference paper
EID:

2-s2.0-84915757901
Contributors: Ortega, Z.; Monzón, M.D.; Benítez, A.N.; Tcharkhtchi, A.; Farzaneh, S.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Boundary element method applied to electroforming process

Materials Science Forum
2014 | Book
DOI: 10.4028/www.scientific.net/MSF.797.125
EID:

2-s2.0-84904330187

Part of ISSN: 16629752 02555476
Contributors: Hernández, P.; Socas, A.; Benítez, A.; Ortega, F.; Diaz, N.; Marrero, M.D.; Monzón, M.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Microtensile video tester for observation of banana and abaca reinforced composites failure

Key Engineering Materials
2014 | Book
DOI: 10.4028/www.scientific.net/KEM.577-578.365
EID:

2-s2.0-84888587700

Part of ISSN: 16629795 10139826
Contributors: Ortega, Z.; Monzón, M.D.; Benítez, A.N.; Tcharkhtchi, A.; Farzaneh, S.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Rotational molding applied to the manufacturing of blades of small wind turbine

ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2014
2014 | Conference paper
DOI: 10.1115/ESDA2014-20539
EID:

2-s2.0-84916887069
Contributors: Marrero, M.D.; Hernández, P.; Suárez, L.; Pestana, D.; Benítez, A.; Martín, J.; Rivero, S.; Calero, E.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Banana and abaca fiber-reinforced plastic composites obtained by rotational molding process

Materials and Manufacturing Processes
2013 | Journal article
DOI: 10.1080/10426914.2013.792431
EID:

2-s2.0-84881280379

Part of ISSN: 10426914 15322475
Contributors: Ortega, Z.; Monzón, M.D.; Benítez, A.N.; Kearns, M.; McCourt, M.; Hornsby, P.R.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Computer aided electroforming. Elecform 3D™

Procedia Engineering
2013 | Conference paper
DOI: 10.1016/j.proeng.2013.08.198
EID:

2-s2.0-84891720752

Part of ISSN: 18777058
Contributors: Hernández, P.; Socas, A.; Benítez, A.; Díaz, N.; Marrero, M.; Ortega, F.; Monzón, M.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Process and material behavior modeling for a new design of micro-additive fused deposition

International Journal of Advanced Manufacturing Technology
2013 | Journal article
DOI: 10.1007/s00170-012-4686-y
EID:

2-s2.0-84888644452

Part of ISSN: 14333015 02683768
Contributors: Monzón, M.D.; Gibson, I.; Benítez, A.N.; Lorenzo, L.; Hernández, P.M.; Marrero, M.D.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Rapid manufacturing experience in training

Materials Science Forum
2013 | Book
DOI: 10.4028/www.scientific.net/MSF.759.47
EID:

2-s2.0-84880745123

Part of ISSN: 16629752 02555476
Contributors: Hernández, P.; Monzón, M.; Benítez, A.; Marrero, M.; Ortega, Z.; Díaz, N.; Ortega, F.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Treatment of banana fiber for use in the reinforcement of polymeric matrices

Measurement: Journal of the International Measurement Confederation
2013 | Journal article
DOI: 10.1016/j.measurement.2012.11.021
EID:

2-s2.0-84871597703

Part of ISSN: 02632241
Contributors: Benítez, A.N.; Monzón, M.D.; Angulo, I.; Ortega, Z.; Hernández, P.M.; Marrero, M.D.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

COMPUTER AIDED ELECTROFORMING FOR RAPID MANUFACTURING APPLICATIONS

Proceedings of the Asme 11th Biennial Conference on Engineering Systems Design and Analysis, Vol 4
2012 | Journal article
Source: Self-asserted source
Antonio Nizardo Benítez Vega

DESIGN AND TESTING OF INNOVATIVE ROTATIONAL MOULD HEATED BY THERMAL FLUID

Proceedings of the Asme International Mechanical Engineering Congress and Exposition 2010, Vol 3, Pts a and B
2012 | Journal article
Source: Self-asserted source
Antonio Nizardo Benítez Vega

Developments towards a more sustainable rotational moulding process

ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials
2012 | Conference paper
EID:

2-s2.0-84903957217
Contributors: Monzón, M.D.; Ortega, Z.; Benítez, A.N.; Ortega, F.; Díaz, N.; Marrero, M.D.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Global efficiency of innovative rotational mold directly heated by thermal fluid

Polymer Engineering and Science
2012 | Journal article
DOI: 10.1002/pen.23139
EID:

2-s2.0-84864851238

Part of ISSN: 00323888 15482634
Contributors: Monzo̊n, M.D.; Bordo̊n, P.; Benítez, A.N.; Kearns, M.; Hernández, P.M.; Marrero, M.D.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Metalized ABS prototypes used in electroplating,TS tratamiento de superficies: Metalizado de prototipos da AiS empleados en electrodeposicidri

Ingenieria Quimica (Spain)
2011 | Other
EID:

2-s2.0-84870007475

Part of ISSN: 02102064
Contributors: Díaz, N.; Marrero, M.D.; Monzón, M.D.; Hernández, P.M.; Benítez, A.N.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Advantages of Fused Deposition Modeling for making electrically conductive plastic patterns

Proceedings - 2010 International Conference on Manufacturing Automation, ICMA 2010
2010 | Conference paper
DOI: 10.1109/ICMA.2010.18
EID:

2-s2.0-79951821265
Contributors: Monzon, M.D.; Diaz, N.; Benitez, A.N.; Marrero, M.D.; Hernandez, P.M.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Behaviour of vacuum casting plastic composites under different treatments of banana fibres

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2010 | Conference paper
DOI: 10.1115/IMECE2010-39782
EID:

2-s2.0-84881438521
Contributors: Monzón, M.D.; Ortega, Z.; Benítez, A.N.; Hernández, P.M.; Marrero, M.D.; Angulo, I.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Design and testing of innovative rotational mould heated by thermal fluid

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2010 | Conference paper
DOI: 10.1115/IMECE2010-39781
EID:

2-s2.0-84881471919
Contributors: Monzón, M.D.; Benítez, A.N.; Bordón, P.; Hernández, P.M.; Marrero, M.D.; Ortega, F.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Study of banana fiber as reinforcement of polyethylene samples made by compression and injection molding

Journal of Biobased Materials and Bioenergy
2010 | Journal article
DOI: 10.1166/jbmb.2010.1075
EID:

2-s2.0-77955382114

Part of ISSN: 15566560 15566579
Contributors: Ortega, Z.; Benítez, A.N.; Monzón, M.D.; Hernández, P.M.; Angulo, I.; Marrero, M.D.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

An innovative electroforming process for oil heated rotational moulding tools

2008 Proceedings of the 9th Biennial Conference on Engineering Systems Design and Analysis
2009 | Conference paper
EID:

2-s2.0-70349178043
Contributors: Monzón, M.; Hernández, P.M.; Benítez, A.N.; Marrero, M.D.; Álvarez, M.A.; Kearns, M.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

New development in computer aided electroforming for rapid prototyping applications

2008 Proceedings of the 9th Biennial Conference on Engineering Systems Design and Analysis
2009 | Conference paper
EID:

2-s2.0-70349102158
Contributors: Monzón, M.; Hernández, P.M.; Marrero, M.D.; Benítez, A.N.; Ortega, F.; Socas, A.O.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Predictability of Plastic Parts Behaviour Made from Rapid Manufacturing

Tsinghua Science and Technology
2009 | Journal article
DOI: 10.1016/S1007-0214(09)70075-6
EID:

2-s2.0-67650725378

Part of ISSN: 10070214
Contributors: Monzón, M.; Hernández, P.M.; Benítez, A.N.; Marrero, M.D.; Fernández, A.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Rapid prototyping applied to a new development in moulds for rotational moulding

Proceedings of the 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping: Virtual and Rapid Manufacturing Advanced Research Virtual and Rapid Prototyping
2008 | Conference paper
EID:

2-s2.0-75049084452
Contributors: Monzón, M.; Marrero, M.D.; Benítez, A.N.; Hernández, P.M.; Kearns, M.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Validation of electrical discharge machining electrodes made with rapid tooling technologies

Journal of Materials Processing Technology
2008 | Journal article
DOI: 10.1016/j.jmatprotec.2007.05.025
EID:

2-s2.0-36649017891

Part of ISSN: 09240136
Contributors: Monzón, M.; Benítez, A.N.; Marrero, M.D.; Hernández, N.; Hernández, P.; Aisa, J.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Rapid prototyping applied to a new development in moulds for rotational moulding

Virtual and Physical Prototyping
2007 | Journal article
DOI: 10.1080/17452750701744341
EID:

2-s2.0-36549024856

Part of ISSN: 17452759 17452767
Contributors: Monzón, M.; Marrero, M.D.; Benítez, A.N.; Hernández, P.M.; Kearns, M.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

A technical note on the characterization of electroformed nickel shells for their application to injection molds

Journal of Materials Processing Technology
2006 | Journal article
DOI: 10.1016/j.jmatprotec.2006.04.003
EID:

2-s2.0-33744517082

Part of ISSN: 09240136
Contributors: Monzon, M.D.; Marrero, M.D.; Benitez, A.N.; Hernandez, P.M.; Cardenes, J.F.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Internal stresses analysis in electroformed nikel shells for thermoplastics inyection mold core (rapid tooling),Análisis de las tensiones internas en las cáscaras de níquel electroconformadas que se utilizan como inserto de un molde de inyección de termoplásticos (rapid tooling)

Revista de Metalurgia (Madrid)
2005 | Journal article
DOI: 10.3989/revmetalm.2005.v41.i1.186
EID:

2-s2.0-18944376138

Part of ISSN: 00348570
Contributors: Monzón, M.D.; Marrero, M.D.; Benítez, A.N.; Hernández, P.M.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier

Combustión de los gases de escape de un motor diesel

Ingenieria Quimica
2001 | Other
EID:

2-s2.0-0035327815

Part of ISSN: 02102064
Contributors: Henríquez Concepción, V.; Benítez Vega, A.N.; Marrero Alemán, M.D.; Jiménez Vega, H.V.
Source: Self-asserted source
Antonio Nizardo Benítez Vega via Scopus - Elsevier
Items per page:
Page 1 of 2
How many people are using ORCID?