Personal information

Biography

I am working, as Assistant Professor, in Mechanical Engineering Department at Lovely Professional University. My focused area of research is 3D printing, metal matrix composites and casting.

Activities

Employment (3)

Lovely Professional University: Phagwara, Punjab, IN

2017-07-22 to present | Assistant Professor (Mechanical)
Employment
Source: Self-asserted source
Sunpreet Singh

GNDEC: Ludhiana, Punjab, IN

2013-08-20 to 2017-07-19 | Senior Research Fellow (Production engineering)
Employment
Source: Self-asserted source
Sunpreet Singh

Gulzar Group of Institutes: Khanna, Punjab, IN

2012-05-16 to 2013-08-07 | Assistant Professor (Mechanical Engineering)
Employment
Source: Self-asserted source
Sunpreet Singh

Education and qualifications (3)

IK Gujral Punjab Technical University: Kapurthala, Punjab, IN

2013-08-15 to 2016-06-15 | PhD (Mechanical)
Education
Source: Self-asserted source
Sunpreet Singh

GNDEC: Ludhiana, Punjab, IN

2010-08-04 to 2012-05-23 | M.Tech (Production Engineering)
Education
Source: Self-asserted source
Sunpreet Singh

LCET: Katani Kalan, Ludhiana, Punjab, IN

2006-07-25 to 2010-05-21 | B.Tech (Mechanical Engineering)
Education
Source: Self-asserted source
Sunpreet Singh

Works (50 of 57)

Items per page:
Page 1 of 2

Lean, green, and smart manufacturing: An ingenious framework for enhancing the sustainability of operations management on the shop floor in industry 4.0

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
2024-08 | Journal article
Contributors: Varun Tripathi; Somnath Chattopadhyaya; A K Mukhopadhyay; Shubham Sharma; Vineet Kumar; Changhe Li; Sunpreet Singh
Source: check_circle
Crossref

Parametric Optimization of Powder-Mixed EDM of AA2014/Si3N4/Mg/Cenosphere Hybrid Composites Using Fuzzy Logic: Analysis of Mechanical, Machining, Microstructural, and Morphological Characterizations

Journal of Composites Science
2023-09-11 | Journal article
Contributors: G. Rajkumar; M. Saravanan; A. Bovas Herbert Bejaxhin; Shubham Sharma; Shashi Prakash Dwivedi; Rajeev Kumar; Sunpreet Singh
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

STUDIES ON PHYSICAL, MICRO-STRUCTURAL, AND SLURRY EROSION BEHAVIOR OF COLD-SPRAYED Ni–20Cr+TiC+Re COATINGS ON SA516 STEEL FOR HIGH-TEMPERATURE APPLICATIONS

Surface Review and Letters
2023-04 | Journal article
Contributors: YADVINDER SINGH; SHUBHAM SHARMA; GURPREET SINGH; GURSHARAN SINGH; JUJHAR SINGH; SHASHI PRAKASH DWIVEDI; SUNPREET SINGH; RANVIJAY KUMAR; S. CHATTOPADHYAYA; CHANGHE LI
Source: check_circle
Crossref

Effect of Pulsation in Microstructure and Mechanical Properties of Titanium Alloy-Annealed Welded Joints at Different Temperatures

Photonics
2023-03-27 | Journal article
Contributors: Uday Kumar; Somnath Chattopadhyaya; Alok Kumar Das; A. H. Seikh; Shubham Sharma; Shashi Prakash Dwivedi; Kaori Nagai; Abhinav Kumar; Ashish Agrawal; Sunpreet Singh
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Mathematical Model Assisted Six-Sigma Approach for Reducing the Logistics Costs of a Pipe Manufacturing Company: A Novel Experimental Approach

Mathematics
2023-01-26 | Journal article
Contributors: Âli Yurdun Orbak; Metin Küçük; Mehmet Akansel; Shubham Sharma; Changhe Li; Raman Kumar; Sunpreet Singh; Gianpaolo Di Bona
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Promising Role of Polylactic Acid as an Ingenious Biomaterial in Scaffolds, Drug Delivery, Tissue Engineering, and Medical Implants: Research Developments, and Prospective Applications

Molecules
2023-01-04 | Journal article
Contributors: Lalit Ranakoti; Brijesh Gangil; Prabhakar Bhandari; Tej Singh; Shubham Sharma; Jujhar Singh; Sunpreet Singh
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Tissues and organ printing: An evolution of technology and materials

Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine
2022-12 | Journal article
Contributors: Gurminder Singh; Sunpreet Singh; Raman Kumar; Chander Parkash; Catalin Pruncu; Seeram Ramakrishna
Source: check_circle
Crossref

Nitinol: From historical milestones to functional properties and biomedical applications

Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine
2022-11 | Journal article
Contributors: Saeid Alipour; Farzaneh Taromian; Erfan Rezvani Ghomi; Mina Zare; Sunpreet Singh; Seeram Ramakrishna
Source: check_circle
Crossref

Deformation Measurement of a SS304 Stainless Steel Sheet Using Digital Image Correlation Method

Photonics
2022-11-28 | Journal article
Contributors: Appurva Jain; Abhishek Mishra; Vikrant Tiwari; Gurminder Singh; Ravinder Pal Singh; Sunpreet Singh
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Optimization of Wire-EDM Process Parameters for Al-Mg-0.6Si-0.35Fe/15%RHA/5%Cu Hybrid Metal Matrix Composite Using TOPSIS: Processing and Characterizations

Journal of Manufacturing and Materials Processing
2022-11-22 | Journal article
Contributors: Jatinder Kumar; Shubham Sharma; Jujhar Singh; Sunpreet Singh; Gurminder Singh
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Effect of Ranque-Hilsch Vortex Tube Cooling to Enhance the Surface-Topography and Tool-Wear in Sustainable Turning of Al-5.6Zn-2.5Mg-1.6Cu-0.23Cr-T6 Aerospace Alloy

Materials
2022-08-18 | Journal article
Contributors: Jasjeevan Singh; Simranpreet Singh Gill; Manu Dogra; Shubham Sharma; Mandeep Singh; Shashi Prakash Dwivedi; Changhe Li; Sunpreet Singh; Shoaib Muhammad; Bashir Salah et al.
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Recent Progression Developments on Process Optimization Approach for Inherent Issues in Production Shop Floor Management for Industry 4.0

Processes
2022-08-12 | Journal article
Contributors: Varun Tripathi; Somnath Chattopadhyaya; Alok Kumar Mukhopadhyay; Shubham Sharma; Changhe Li; Sunpreet Singh; Waqas Saleem; Bashir Salah; Abdullah Mohamed
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

A Sustainable Productive Method for Enhancing Operational Excellence in Shop Floor Management for Industry 4.0 Using Hybrid Integration of Lean and Smart Manufacturing: An Ingenious Case Study

Sustainability
2022-06-18 | Journal article
Contributors: Varun Tripathi; Somnath Chattopadhyaya; Alok Kumar Mukhopadhyay; Shubham Sharma; Changhe Li; Sunpreet Singh; Waqas Ul Hussan; Bashir Salah; Waqas Saleem; Abdullah Mohamed
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Characterization of Friction Stir-Welded Polylactic Acid/Aluminum Composite Primed through Fused Filament Fabrication

Journal of Materials Engineering and Performance
2022-03 | Journal article
Contributors: Ranvijay Kumar; Nishant Ranjan; Vinay Kumar; Raman Kumar; Jasgurpreet Singh Chohan; Aniket Yadav; Piyush; Shubham Sharma; Chander Prakash; Sunpreet Singh et al.
Source: check_circle
Crossref

Hand and Abrasive Flow Polished Tungsten Carbide Die: Optimization of Surface Roughness, Polishing Time and Comparative Analysis in Wire Drawing

Materials
2022-02-09 | Journal article
Contributors: Raman Kumar; Sehijpal Singh; Vivek Aggarwal; Sunpreet Singh; Danil Yurievich Pimenov; Khaled Giasin; Krzysztof Nadolny
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

A critical review on damage modeling and failure analysis of pin joints in fiber reinforced composite laminates

Polymers and Polymer Composites
2022-01 | Journal article
Contributors: Akash Gupta; Manjeet Singh; Jaswinder Singh; Sunpreet Singh; Chander Prakash
Source: check_circle
Crossref

Aluminum metal composites primed by fused deposition modeling-assisted investment casting: Hardness, surface, wear, and dimensional properties

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
2021-12-06 | Journal article
Contributors: Sunpreet Singh; Raman Kumar; Ranvijay Kumar; Jasgurpreet Singh Chohan; Nishant Ranjan; Raman Kumar
Source: check_circle
Crossref

An Agile System to Enhance Productivity through a Modified Value Stream Mapping Approach in Industry 4.0: A Novel Approach

Sustainability
2021-10-29 | Journal article
Contributors: Varun Tripathi; Somnath Chattopadhyaya; Alok Bhadauria; Shubham Sharma; Changhe Li; Danil Yurievich Pimenov; Khaled Giasin; Sunpreet Singh; Girish Dutt Gautam
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Investigation of Functionally Graded Adherents on Failure of Socket Joint of FRP Composite Tubes

Materials
2021-10-24 | Journal article
Contributors: Chander Prakash; Vidyapati Kumar; Ankita Mistri; Amrinder Singh Uppal; Atul Babbar; Bhargav Prajwal Pathri; Jonty Mago; Ankit Sharma; Sunpreet Singh; Linda Yongling Wu et al.
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Correction to: Mechanical Reliability and In Vitro Bioactivity of 3D-Printed Porous Polylactic Acid-Hydroxyapatite Scaffold

Journal of Materials Engineering and Performance
2021-07 | Journal article
Contributors: Chander Prakash; Gurminder Singh; Sunpreet Singh; Linda Yongling Wu; H. Y. Zheng; Seeram Ramakrishna; Roger Narayan
Source: check_circle
Crossref

Mechanical Reliability and In Vitro Bioactivity of 3D-Printed Porous Polylactic Acid-Hydroxyapatite Scaffold

Journal of Materials Engineering and Performance
2021-07 | Journal article
Contributors: Chander Prakash; Gurminder Singh; Sunpreet Singh; W. L. Linda; H. Y. Zheng; Seeram Ramakrishna; Roger Narayan
Source: check_circle
Crossref

On briefing the surface modifications of polylactic acid: A scope for betterment of biomedical structures

Journal of Thermoplastic Composite Materials
2021-07 | Journal article
Contributors: Guravtar Singh Mann; Lakhwinder Pal Singh; Parmod Kumar; Sunpreet Singh; Chander Prakash
Source: check_circle
Crossref

A collection of the novel coronavirus (COVID-19) detection assays, issues, and challenges

Heliyon
2021-06 | Journal article
Contributors: Erfan Rezvani Ghomi; Fatemeh Khosravi; Ali Mohseni-M; Nooshin Nourbakhsh; Mahsa Haji Mohammad Hoseini; Sunpreet Singh; Mikael S. Hedenqvist; Seeram Ramakrishna
Source: check_circle
Crossref

Cloud Manufacturing, Internet of Things-Assisted Manufacturing and 3D Printing Technology: Reliable Tools for Sustainable Construction

Sustainability
2021-06-30 | Journal article
Contributors: Rajesh Singh; Anita Gehlot; Shaik Vaseem Akram; Lovi Raj Gupta; Manoj Kumar Jena; Chander Prakash; Sunpreet Singh; Raman Kumar
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Environmental, Economical and Technological Analysis of MQL-Assisted Machining of Al-Mg-Zr Alloy Using PCD Tool

Sustainability
2021-06-30 | Journal article
Contributors: Md. Rezaul Karim; Juairiya Binte Tariq; Shah Murtoza Morshed; Sabbir Hossain Shawon; Abir Hasan; Chander Prakash; Sunpreet Singh; Raman Kumar; Yadaiah Nirsanametla; Catalin I. Pruncu
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Investigations on Melt Flow Rate and Tensile Behaviour of Single, Double and Triple-Sized Copper Reinforced Thermoplastic Composites

Materials
2021-06-23 | Journal article
Contributors: Balwant Singh; Raman Kumar; Jasgurpreet Singh Chohan; Sunpreet Singh; Catalin Iulian Pruncu; Maria Luminita Scutaru; Radu Muntean
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Effect of Different Lubricating Environment on the Tribological Performance of CNT Filled Glass Reinforced Polymer Composite

Materials
2021-05-31 | Journal article
Contributors: Sandeep Agrawal; Nishant K. Singh; Rajeev Kumar Upadhyay; Gurminder Singh; Yashvir Singh; Sunpreet Singh; Catalin I. Pruncu
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Functional grading of surfaces through hybrid ultrasonic, abrasive water jet, and electric discharge machining processing

Journal of the Brazilian Society of Mechanical Sciences and Engineering
2021-04 | Journal article
Contributors: Chander Prakash; Sunpreet Singh; Linda Yongling Wu; H. Y. Zheng; Grzegorz Królczyk
Source: check_circle
Crossref

Precision machining of biopolymers: A brief review of the literature and case study on diamond turning

Journal of Thermoplastic Composite Materials
2021-04 | Journal article
Contributors: Vinod Mishra; Gagandeep Singh; Chandra B Yadav; Vinod Karar; Chander Prakash; Sunpreet Singh
Source: check_circle
Crossref

Revealing the WEDM Process Parameters for the Machining of Pure and Heat-Treated Titanium (Ti-6Al-4V) Alloy

Materials
2021-04-28 | Journal article
Contributors: Nitin Kumar Gupta; Nalin Somani; Chander Prakash; Ranjit Singh; Arminder Singh Walia; Sunpreet Singh; Catalin Iulian Pruncu
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Multiple-Criteria Decision-Making and Sensitivity Analysis for Selection of Materials for Knee Implant Femoral Component

Materials
2021-04-20 | Journal article
Contributors: Raman Kumar; Rohit Dubey; Sehijpal Singh; Sunpreet Singh; Chander Prakash; Yadaiah Nirsanametla; Grzegorz Królczyk; Roman Chudy
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Vibration Exposure and Transmissibility on Dentist’s Anatomy: A Study of Micro Motors and Air-Turbines

International Journal of Environmental Research and Public Health
2021-04-13 | Journal article
Contributors: Harish Kumar Banga; Pankaj Goel; Raman Kumar; Vikas Kumar; Parveen Kalra; Sehijpal Singh; Sunpreet Singh; Chander Prakash; Catalin Pruncu
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Comparative job production based life cycle assessment of conventional and additive manufacturing assisted investment casting of aluminium: A case study

Journal of Cleaner Production
2021-03 | Journal article
Contributors: Chander Prakash; Sunpreet Singh; Harishankar Kopperi; Seeram Ramakrihna; S. Venkata Mohan
Source: check_circle
Crossref

Investigating the Efficacy of Adhesive Tape for Drilling Carbon Fibre Reinforced Polymers

Materials
2021-03-30 | Journal article
Contributors: Chander Prakash; Alokesh Pramanik; Animesh K. Basak; Yu Dong; Sujan Debnath; Subramaniam Shankar; Sunpreet Singh; Linda Yongling Wu; Hongyu Y. Zheng
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

A Comparative Analysis of Laser Additive Manufacturing of High Layer Thickness Pure Ti and Inconel 718 Alloy Materials Using Finite Element Method

Materials
2021-02-12 | Journal article
Contributors: Sapam Ningthemba Singh; Sohini Chowdhury; Yadaiah Nirsanametla; Anil Kumar Deepati; Chander Prakash; Sunpreet Singh; Linda Yongling Wu; Hongyu Y. Zheng; Catalin Pruncu
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Recent Advancements in Customized Investment Castings Through Additive Manufacturing

2020 | Book chapter
Contributors: Sunpreet Singh; Chander Prakash; M. Uthayakumar
Source: check_circle
Crossref

Effect of cryogenic treatment on the microstructure, mechanical properties and finishability of β-TNTZ alloy for orthopedic applications

Materials Letters
2020-11 | Journal article
Contributors: Sunpreet Singh; Chander Prakash
Source: check_circle
Crossref

Magneto-Rheological Fluid Assisted Abrasive Nanofinishing of β-Phase Ti-Nb-Ta-Zr Alloy: Parametric Appraisal and Corrosion Analysis

Materials
2020-11-16 | Journal article
Contributors: Sunpreet Singh; Chander Prakash; Alokesh Pramanik; Animesh Basak; Rajasekhara Shabadi; Grzegorz Królczyk; Marta Bogdan-Chudy; Atul Babbar
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Characterization of indigenously coated biodegradable magnesium alloy primed through novel additive manufacturing assisted investment casting

Materials Letters
2020-09 | Journal article
Contributors: Chander Prakash; Sunpreet Singh; Seeram Ramakrishna
Source: check_circle
Crossref

Characterization of three‐dimensional printed thermal‐stimulus polylactic acid‐hydroxyapatite‐based shape memory scaffolds

Polymer Composites
2020-09 | Journal article
Contributors: Gurminder Singh; Sunpreet Singh; Chander Prakash; Raman Kumar; Ranvijay Kumar; Seeram Ramakrishna
Source: check_circle
Crossref

Deposition of HA-TiO2 by plasma spray on β-phase Ti-35Nb-7Ta-5Zr alloy for hip stem: Characterization, mechanical properties, corrosion, and in-vitro bioactivity

Surface and Coatings Technology
2020-09 | Journal article
Contributors: Sunpreet Singh; Chander Prakash; Harjit Singh
Source: check_circle
Crossref

3D printed biodegradable functional temperature-stimuli shape memory polymer for customized scaffoldings

Journal of the Mechanical Behavior of Biomedical Materials
2020-08 | Journal article
Contributors: Akash Pandey; Gurminder Singh; Sunpreet Singh; Kanishak Jha; Chander Prakash
Source: check_circle
Crossref

Green composites: A review of processing technologies and recent applications

Journal of Thermoplastic Composite Materials
2020-08 | Journal article
Contributors: Guravtar Singh Mann; Lakhwinder Pal Singh; Pramod Kumar; Sunpreet Singh
Source: check_circle
Crossref

Selection of portable hard disk drive based upon weighted aggregated sum product assessment method: A case of Indian market

Measurement and Control
2020-08 | Journal article
Contributors: Raman Kumar; Abhishek Bhattacherjee; Angad Deep Singh; Sunpreet Singh; Catalin I Pruncu
Source: check_circle
Crossref

Current status and future directions of fused filament fabrication

Journal of Manufacturing Processes
2020-07 | Journal article
Contributors: Sunpreet Singh; Gurminder Singh; Chander Prakash; Seeram Ramakrishna
Source: check_circle
Crossref

Surface Characteristics of Machined Polystyrene with 3D Printed Thermoplastic Tool

Materials
2020-06-16 | Journal article
Contributors: Kamalpreet Sandhu; Gurminder Singh; Sunpreet Singh; Raman Kumar; Chander Prakash; Seeram Ramakrishna; Grzegorz Królczyk; Catalin I. Pruncu
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Microwave sintering of porous Ti–Nb-HA composite with high strength and enhanced bioactivity for implant applications

Journal of Alloys and Compounds
2020-05 | Journal article
Contributors: Chander Prakash; Sunpreet Singh; Seeram Ramakrishna; Grzegorz Królczyk; Chi H. Le
Source: check_circle
Crossref

Investigating the optimum parametric setting for MRR of expandable polystyrene machined with 3D printed end mill tool

Materials Today: Proceedings
2020-04 | Journal article
Contributors: Sunpreet Singh; Gurminder Singh; Kamalpreet Sandhu; Chander Prakash; Rupinder Singh
Source: check_circle
Crossref

On the mechanical characteristics of friction stir welded dissimilar polymers: statistical analysis of the processing parameters and morphological investigations of the weld joint

Journal of the Brazilian Society of Mechanical Sciences and Engineering
2020-04 | Journal article
Contributors: Sunpreet Singh; Gurminder Singh; Chander Prakash; Ranvijay Kumar
Source: check_circle
Crossref

3D Printing of polymer composites: A short review

Material Design & Processing Communications
2020-04-26 | Journal article
Contributors: Sunpreet Singh; Seeram Ramakrishna; Filippo Berto
Source: check_circle
Crossref
Items per page:
Page 1 of 2

Peer review (11 reviews for 8 publications/grants)

Review activity for Acta materialia. (1)
Review activity for Additive manufacturing. (1)
Review activity for Archives of computational methods in engineering. (1)
Review activity for Circular Economy and Sustainability. (1)
Review activity for Fibers And Polymers. (1)
Review activity for Journal of materials processing technology. (1)
Review activity for Progress in additive manufacturing. (4)
Review activity for Trends in food science & technology. (1)