Personal information

United States

Activities

Employment (3)

Wright State University: Dayton, Ohio, US

2013-01-01 to present | Professor (Mechanical and Materials Eng.)
Employment
Source: Self-asserted source
Ahsan Mian

Montana State University Bozeman: Bozeman, MT, US

2005-08-15 to 2012-12-31 | Associate/Asst Professor (Mechanical and Industrial Engineering)
Employment
Source: Self-asserted source
Ahsan Mian

Wayne State University: Detroit, MI, US

2002-04 to 2005-08 | Visiting Faculty (Mechanical Engineering)
Employment
Source: Self-asserted source
Ahsan Mian

Education and qualifications (1)

Auburn University: Auburn, AL, US

1996-01-01 to 1999-12 | Ph.D. (Mechanical Engineering)
Education
Source: Self-asserted source
Ahsan Mian

Professional activities (2)

American Society of Mechanical Engineers: NY, NY, US

Member/Division Past Chair
Membership
Source: Self-asserted source
Ahsan Mian

American Society For Engineering Education: Washington D.C., District of Columbia, US

Member
Membership
Source: Self-asserted source
Ahsan Mian

Works (50 of 71)

Items per page:
Page 1 of 2

Developing scaling laws to predict compressive mechanical properties and determine geometrical parameters of modified BCC lattice structures

Engineering Reports
2023-02 | Journal article
Contributors: Hasanain S. Abdulhadi; Abdalsalam Fadeel; Tahseen A. Alwattar; Ahsan Mian
Source: check_circle
Crossref

ABAQUS plug-in finite element tool for designing and analyzing lattice cell structures

Advances in Engineering Software
2022-07 | Journal article
Contributors: Abdalsalam Fadeel; Hasanain Abdulhadi; Raghavan Srinivasan; Ahsan Mian
Source: check_circle
Crossref

Advances in mechanical metamaterials for vibration isolation: A review

Advances in Mechanical Engineering
2022-03 | Journal article
Contributors: Mohammed Al Rifaie; Hasanain Abdulhadi; Ahsan Mian
Source: check_circle
Crossref

Computational investigation of the post-yielding behavior of 3D-printed polymer lattice structures

Journal of Computational Design and Engineering
2022-02-02 | Journal article
Contributors: Abdalsalam Fadeel; Hasanain Abdulhadi; Golam Newaz; Raghavan Srinivasan; Ahsan Mian
Source: check_circle
Crossref

A Computational Approach in Understanding the Low-Velocity Impact Behavior and Damage of 3D-Printed Polymer Lattice Structures

Journal of Materials Engineering and Performance
2021-09 | Journal article
Part of ISSN: 1059-9495
Part of ISSN: 1544-1024
Source: Self-asserted source
Ahsan Mian

Layer-to-layer physical characteristics and compression behavior of 3D printed polymer metastructures fabricated using different process parameters

Journal of Elastomers & Plastics
2021-08 | Journal article
Contributors: Sivani Patibandla; Ahsan Mian
Source: check_circle
Crossref

The effects of printed lattice cell structure superstrates on printed patch antennas

International Journal of RF and Microwave Computer-Aided Engineering
2021-06-30 | Journal article
Contributors: Ahsan Mian; Aamir H. Hamad; Sarah D. Longstreth; Adam Archacki; Roberto S. Aga; Carrie M. Bartsch; Emily M. Heckman
Source: check_circle
Crossref

Characteristics of nanosilver ink (UTDAg) microdroplets and lines on polyimide during inkjet printing at high stage velocity

Materials Advances
2020 | Journal article
Contributors: Aamir Hamad; Adam Archacki; Ahsan Mian
Source: check_circle
Crossref

Direct-Write Inkjet Printing of Nanosilver Ink (UTDAg) on PEEK Substrate

Journal of Manufacturing Processes
2020-07 | Journal article
Contributors: Aamir Hamad; Ahsan Mian; Saiful I. Khondaker
Source: check_circle
Crossref

Developing an Equivalent Solid Material Model for BCC Lattice Cell Structures Involving Vertical and Horizontal Struts

Journal of Composites Science
2020-06-17 | Journal article
Contributors: Tahseen A. Alwattar; Ahsan Mian
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Effect of driving waveform on size and velocity of generated droplets of nanosilver ink (Smartink)

Manufacturing Letters
2020-04 | Journal article
Part of ISSN: 2213-8463
Contributors: Aamir H. Hamad; Mohammed I. Salman; Ahsan Mian
Source: Self-asserted source
Ahsan Mian

Drop-Weight Impact Behavior of Three-Dimensional Printed Polymer Lattice Structures with Spatially Distributed Vertical Struts

Journal of Dynamic Behavior of Materials
2019-12-04 | Journal article
Contributors: M. Al Rifaie; A. Mian; P. Katiyar; P. Majumdar; R. Srinivasan
Source: check_circle
Crossref

Effect of strut length and orientation on elastic mechanical response of modified body-centered cubic lattice structures

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
2019-11 | Journal article
Contributors: Hasanain S Abdulhadi; Ahsan Mian
Source: check_circle
Crossref

Compression behavior of three-dimensional printed polymer lattice structures

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
2019-08 | Journal article
Contributors: Mohammed Al Rifaie; Ahsan Mian; Raghavan Srinivasan
Source: check_circle
Crossref

Influence of Material Property Variation on Computationally Calculated Melt Pool Temperature during Laser Melting Process

Metals
2019-04-18 | Journal article
Contributors: Sazzad H. Ahmed; Ahsan Mian
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Development of an Elastic Material Model for BCC Lattice Cell Structures Using Finite Element Analysis and Neural Networks Approaches

Journal of Composites Science
2019-04-01 | Journal article
Contributors: Tahseen A. Alwattar; Ahsan Mian
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Radio frequency response of flexible microstrip patch antennas under compressive and bending loads using multiphysics modeling approach

International Journal of RF and Microwave Computer-Aided Engineering
2019-03-28 | Journal article
Contributors: Aamir H. Hamad; Ahsan Mian
Source: check_circle
Crossref

Effect of Vertical Strut Arrangements on Compression Characteristics of 3D Printed Polymer Lattice Structures: Experimental and Computational Study

Journal of Materials Engineering and Performance
2019-02 | Journal article
Part of ISSN: 1059-9495
Part of ISSN: 1544-1024
Contributors: Abdalsalam Fadeel; Ahsan Mian; Mohammed Al Rifaie; Raghavan Srinivasan
Source: Self-asserted source
Ahsan Mian

A Numerical Study of Diffusion of Nanoparticles in a Viscous Medium During Solidification

Journal of Thermal Science and Engineering Applications
2019-02-01 | Journal article
Part of ISSN: 1948-5085
Part of ISSN: 1948-5093
Contributors: Kazi M. Rahman; M. Ruhul Amin; Ahsan Mian
Source: Self-asserted source
Ahsan Mian

Board 118: Lessons Learned from a Collaborative NSF RET Program involving Three Regional Universities

2018-06 | Conference paper
Contributors: Ahsan Mian; Margaret Pinnell; M. Suzanne Franco; Leanne Petry; Brett Doudican; Raghavan Srinivasan
Source: check_circle
Crossref

Low-Velocity Impact Behavior of Sandwich Structures with Additively Manufactured Polymer Lattice Cores

Journal of Materials Engineering and Performance
2018-05 | Journal article
Part of ISSN: 1059-9495
Part of ISSN: 1544-1024
Contributors: Andrew J. Turner; Mohammed Al Rifaie; Ahsan Mian; Raghavan Srinivasan
Source: Self-asserted source
Ahsan Mian

Effect of heterogeneity in additively manufactured dielectric structures on RF response of microstrip patch antennas

International Journal of RF and Microwave Computer-Aided Engineering
2018-05-27 | Journal article
Contributors: Sandeep Keerthi; Aamir H. Hamad; Ahsan Mian; Jallisa J. Clifford; Prasun K. Majumdar; Nowrin Chamok; Mohammod Ali
Source: check_circle
Crossref

Four-Terminal Square Piezoresistive Sensors for MEMS Pressure Sensing

Journal of Sensors
2017 | Journal article
Contributors: Awlad Hossain; Ahsan Mian
Source: check_circle
Crossref

Effect of Laser Power and Scan Speed on Melt Pool Characteristics of Commercially Pure Titanium (CP-Ti)

Journal of Materials Engineering and Performance
2017-07 | Journal article
Part of ISSN: 1059-9495
Part of ISSN: 1544-1024
Contributors: Chandrakanth Kusuma; Sazzad H. Ahmed; Ahsan Mian; Raghavan Srinivasan
Source: Self-asserted source
Ahsan Mian

Board # 105 :Collaborative Community-based Research Experiences in Materials and Manufacturing (Work in Progress)

2017-06 | Conference paper
Contributors: Leanne Petry; Margaret Pinnell; M. Suzanne Franco; Brett Doudican; Ahsan Mian; Raghavan Srinivasan
Source: check_circle
Crossref

Finite Element Analysis of System-Level Electronic Packages for Space Applications

Journal of Computational Engineering
2015-03 | Journal article
DOI:

10.1155/2015/428073

Source: Self-asserted source
Ahsan Mian

Microstructural analysis of laser micro-welds between copper and aluminum

2014 | Journal article
DOI:

10.1007/s00542-014-2385-3

EID:

2-s2.0-84916898921

Contributors: Mian, A.; Taylor, C.; Vijwani, H.
Source: Self-asserted source
Ahsan Mian via Scopus - Elsevier

Microstructural analysis of laser micro-welds between electrode materials for Li-Ion battery applications

2013 | Conference paper
DOI:

10.1115/IMECE2013-64689

EID:

2-s2.0-84903463897

Contributors: Mian, A.; Taylor, C.; Vijwani, H.; Hartke, K.; Mukhopadhyay, S.; Dosser, L.
Source: Self-asserted source
Ahsan Mian via Scopus - Elsevier

Nano-indentation for characterizing mechanical properties of soft materials

2013 | Conference paper
DOI:

10.1115/IMECE2013-62056

EID:

2-s2.0-84903488065

Contributors: Hossain, A.; Mian, A.
Source: Self-asserted source
Ahsan Mian via Scopus - Elsevier

Numerical analysis for design optimization of microcantilever beams for measuring rheological properties of viscous fluid

2013 | Journal article
DOI:

10.1016/j.finel.2013.01.002

EID:

2-s2.0-84873697450

Contributors: Hossain, A.; Mishty, A.; Mian, A.
Source: Self-asserted source
Ahsan Mian via Scopus - Elsevier

Characterize dynamic response of cantilevers submerged in viscous fluids

2012 | Conference paper
DOI:

10.1115/IMECE2012-85096

EID:

2-s2.0-84887314606

Contributors: Hossain, A.; Mian, A.
Source: Self-asserted source
Ahsan Mian via Scopus - Elsevier

Laser micro-welding of aluminum and copper with and without tin foil alloy

2012 | Journal article
DOI:

10.1007/s00542-011-1378-8

EID:

2-s2.0-84855986368

Contributors: Hailat, M.M.; Mian, A.; Chaudhury, Z.A.; Newaz, G.; Patwa, R.; Herfurth, H.J.
Source: Self-asserted source
Ahsan Mian via Scopus - Elsevier

Model development and analysis of a cricket filiform hair socket under low velocity air currents

2012 | Conference paper
DOI:

10.1115/IMECE2012-85436

EID:

2-s2.0-84887311513

Contributors: Joshi, K.; Mian, A.; Miller, J.
Source: Self-asserted source
Ahsan Mian via Scopus - Elsevier

Prediction of the dynamic response of a mini-cantilever beam partially submerged in viscous media using finite element method

2012 | Journal article
DOI:

10.1016/j.finel.2011.08.004

EID:

2-s2.0-80052134272

Contributors: Hossain, A.; Humphrey, L.; Mian, A.
Source: Self-asserted source
Ahsan Mian via Scopus - Elsevier

Analysis of laser fabricated microjoint performance in cerebrospinal fluid using a computational approach

2011 | Journal article
DOI:

10.1016/j.jmbbm.2010.09.013

EID:

2-s2.0-78649317880

Contributors: Mian, A.; Law, J.; Newaz, G.
Source: Self-asserted source
Ahsan Mian via Scopus - Elsevier

Design, fabrication, and testing of VDP MEMS pressure sensors

2011 | Journal article
DOI:

10.1007/s00542-011-1307-x

EID:

2-s2.0-80052612985

Contributors: Cassel, R.; Mian, A.; Kaiser, T.
Source: Self-asserted source
Ahsan Mian via Scopus - Elsevier

Numerical analysis to predict dynamic response of mini cantilever beam submerged in viscous fluids

2011 | Conference paper
EID:

2-s2.0-84869157607

Contributors: Hossain, A.; Mian, A.
Source: Self-asserted source
Ahsan Mian via Scopus - Elsevier

The Montana MULE: A case study in interdisciplinary capstone design

2011 | Conference paper
EID:

2-s2.0-80051890604

Contributors: LaMeres, B.J.; Mian, A.; Lloyd, H.; Larson, R.
Source: Self-asserted source
Ahsan Mian via Scopus - Elsevier

Aerodynamic performance analysis of three bladed savonius wind turbine with different overlap ratios and at various reynolds number

2010 | Conference paper
DOI:

10.1115/IMECE2010-40272

EID:

2-s2.0-84881392307

Contributors: Rahman, M.; Morshed, K.N.; Mian, A.
Source: Self-asserted source
Ahsan Mian via Scopus - Elsevier

Characterization of laser processed sub-millimeter lap joints between copper and aluminum under tensile load

2010 | Conference paper
DOI:

10.1115/IMECE2010-40590

EID:

2-s2.0-84881400180

Contributors: Mian, A.; Hailat, M.; Newaz, G.; Patwa, R.; Herfurth, H.
Source: Self-asserted source
Ahsan Mian via Scopus - Elsevier

Computational investigation of van der Pauw structures for MEMS pressure sensors

2010 | Journal article
DOI:

10.1016/j.commatsci.2010.06.008

EID:

2-s2.0-77955467507

Contributors: Mian, A.; Law, J.
Source: Self-asserted source
Ahsan Mian via Scopus - Elsevier

Dynamic response of small cantilever beams in viscous media

2010 | Conference paper
DOI:

10.1115/IMECE2010-39836

EID:

2-s2.0-84881470486

Contributors: Mishty, A.; Stewart, P.; Mian, A.
Source: Self-asserted source
Ahsan Mian via Scopus - Elsevier

Geometric optimization of van der Pauw structure based MEMS pressure sensor

2010 | Journal article
DOI:

10.1007/s00542-010-1124-7

EID:

2-s2.0-79551588165

Contributors: Mian, A.; Law, J.
Source: Self-asserted source
Ahsan Mian via Scopus - Elsevier

High sensitivity pressure measurement using van der Pauw structure as a sensing element

2010 | Conference paper
DOI:

10.1115/IMECE2009-11649

EID:

2-s2.0-77954279988

Contributors: Cassel, R.; Mishty, A.; Mian, A.
Source: Self-asserted source
Ahsan Mian via Scopus - Elsevier

Design, fabrication, and testing of the Van Der Pauw piezoresistive structure for pressure sensing

2009 | Conference paper
DOI:

10.1115/IMECE2008-66813

EID:

2-s2.0-70349138438

Contributors: Cassel, R.; Mian, A.
Source: Self-asserted source
Ahsan Mian via Scopus - Elsevier

Performance of laser microjoints in rat brain

2009 | Conference paper
DOI:

10.1115/IMECE2008-66819

EID:

2-s2.0-70149116313

Contributors: Mian, A.; Sultana, T.; Newaz, G.
Source: Self-asserted source
Ahsan Mian via Scopus - Elsevier

Postimplantation pressure testing and characterization of laser bonded glass/polyimide microjoints

2009 | Journal article
DOI:

10.1002/jbm.b.31325

EID:

2-s2.0-67749108637

Contributors: Mian, A.; Sultana, T.; Georgiev, D.; Witte, R.; Herfurth, H.; Auner, G.; Newaz, G.
Source: Self-asserted source
Ahsan Mian via Scopus - Elsevier

Geometric optimization of Van Der Pauw structure based MEMS pressure sensor

2008 | Conference paper
DOI:

10.1115/IMECE2007-42307

EID:

2-s2.0-44349142740

Contributors: Law, J.; Cassei, R.; Mian, A.
Source: Self-asserted source
Ahsan Mian via Scopus - Elsevier

A high sensitivity MEMS pressure sensor

2007 | Conference paper
DOI:

10.1109/WMED.2007.368060

EID:

2-s2.0-36949029804

Contributors: Law, J.; Mian, A.
Source: Self-asserted source
Ahsan Mian via Scopus - Elsevier

A high sensitivity piezoresistive pressure sensor

2007 | Conference paper
DOI:

10.1115/MNC2007-21300

EID:

2-s2.0-34547935361

Contributors: Mian, A.; Law, J.
Source: Self-asserted source
Ahsan Mian via Scopus - Elsevier
Items per page:
Page 1 of 2

Peer review (3 reviews for 3 publications/grants)

Review activity for Composite structures (1)
Review activity for Macromolecular rapid communications. (1)
Review activity for Review of scientific instruments online. (1)