Personal information

Other IDs

Scopus Author ID: 55178645800

Biography

Assist. Prof. Miloš Madić, PhD

Miloš Madić was born in 1981 in Niš. He completed graduate studies in 2006 at the Faculty of Mechanical Engineering, University of Niš, and in 2013, at the same faculty, he completed doctoral academic studies.
From 2008 to 2011 he was a scholarship holder of the Ministry of Science and Environmental Protection of the Republic of Serbia. Since 2012, he has been employed at the Faculty of Mechanical Engineering in Niš as research associate. In 2016 he was elected to the position of assistant, and in 2019 he was elected to the position of assistant with a doctoral degree. In 2020 he was elected to the position of assistant professor for the scientific field Production systems and technologies.
He is the author of three university textbooks and one monograph. He has published more than 150 papers and 3 technical solutions. He was a member of the committees of several international conferences. He has reviewed more than 30 papers in international journals with impact factor.
He participated in the realization of several domestic and international scientific research projects.
As a professor at the Department for production and information technologies he is engaged in several courses.

Activities

Collapse all

Employment (1)

University of Niš, Faculty of Mechanical Engineering in Niš: Niš, RS

Assistant professor (Department for production and information technologies)
Employment
Source: Self-asserted source
Milos Madic

Education and qualifications (1)

University of Niš, Faculty of Mechanical Engineering in Niš: Niš, Nis, RS

PhD (Department for production and information technologies)
Education
Source: Self-asserted source
Milos Madic

Works (50 of 105)

Items per page:
Page 1 of 3

Analysis of cut radii dimensional accuracy in CO 2 fusion laser cutting

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
2025-03-24 | Journal article
DOI: 10.1177/09544054251326326
Contributors: Miloš Madić; Srđan Mladenović; Dragan Rodić; Marin Gostimirović
Source: check_circle
Crossref

Application of Logistic Regression for Identification of Dross Formation Conditions in CO2 Laser Cutting

2024 | Book chapter
DOI: 10.1007/978-3-031-78635-8_7
Contributors: Miloš Madić; Milan Trifunović; Goran Mladenović; Saša Nikolić; Igor Kocić
Source: check_circle
Crossref

Comparative analysis of cutting force prediction models

44th JUPITER Conference
2024 | Conference paper
Part of ISBN: 978-86-6060-204-8
Contributors: Jelena Stanojkovic; Milos Madic; Dragan Lazarevic
Source: Self-asserted source
Milos Madic

Deep Learning Models for Metal Surface Defect Detection

2024 | Book chapter
DOI: 10.1007/978-3-031-71419-1_8
Contributors: Nikola Despenić; Milan Zdravković; Miloš Madić
Source: check_circle
Crossref

DEVELOPMENT AND ANALYSIS OF ANN MODEL FOR TOOL LIFE PREDICTION IN DRY TURNING OF S355JR UNALLOYED STEEL

2024 | Conference paper
DOI: 10.24867/MMA-2024-01-002
Contributors: Milos Madic; Milan Trifunović; Predrag Jankovic
Source: check_circle
Crossref

Development and Solving of Constrained Laser Cutting Optimization Model

2024 | Conference paper
DOI: 10.46793/SAUM24.138M
Contributors: Miloš Madić; Milan Trifunović; Saša S. Nikolić; Nikola Danković
Source: check_circle
Crossref

DEVELOPMENT OF SUPPORT VECTOR MACHINE MODEL FOR CHIP FORM CLASSIFICATION IN TURNING OF POM-C

2024 | Conference paper
DOI: 10.46793/IIZS24.171M
Contributors: Miloš Madić; Milan Trifunović; Marko Kovačević
Source: check_circle
Crossref

Material selection of wave energy turbine blade by using MCDM Solver

2024 | Conference paper
DOI: 10.5937/SimTerm24394P
Contributors: Dušan Petković; Miloš Madić
Source: check_circle
Crossref

Multi-objective optimization of roundness and positional errors in CO2 laser cutting of holes in AISI 316l stainless steel

UPB Scientific Bulletin, Series D: Mechanical Engineering
2024 | Journal article
Contributors: Milos Madic; Srdjan Mladenovic
Source: Self-asserted source
Milos Madic

Selection of cutting insert for longitudinal turning of unalloyed steel using robust decision making

2024 | Conference paper
DOI: 10.5937/IMCSM24034M
Contributors: Miloš Madić; Milan Trifunović; Goran Petrović
Source: check_circle
Crossref

Using of satellite data for railway infrastructure monitoring

2024 | Conference paper
DOI: 10.5937/RAILCON24009D
Contributors: Danijela Ristić-Durrant; Milan Banić; Miloš Madić; Alina Klapper; Milan Trifunović; Miloš Simonović
Source: check_circle
Crossref

Analysis of Kerf Width and its Variation in CO2 Laser Cutting of Straight and Curved Cut Profiles

Tehnicki vjesnik - Technical Gazette
2024-12-15 | Journal article
DOI: 10.17559/tv-20240717001856
Part of ISSN: 1330-3651
Part of ISSN: 1848-6339
Contributors: Milos Madic; Constantin Cristinel Girdu; Dragan Marinkovic; Predrag Jankovic; Milan Trifunovic
Source: Self-asserted source
Milos Madic

CONTROL SYSTEM OF CATENARY CONTINOUS VULCANIZATION LINE FOR RUBBER CABLES

Facta Universitatis, Series: Automatic Control and Robotics
2024-10-13 | Journal article
DOI: 10.22190/FUACR240717005K
Contributors: Igor Kocić; Saša S. Nikolić; Staniša Perić; Miloš Madić; Milan Trifunović; Nikola Danković
Source: check_circle
Crossref

Traditional and Integrated MCDM Approaches for Assessment and Ranking of Laser Cutting Conditions

Spectrum of Mechanical Engineering and Operational Research
2024-09-24 | Journal article
DOI: 10.31181/smeor11202422
Part of ISSN: 3042-0288
Contributors: Milos Madic; Goran Petrović; Dušan Petković; Predrag Janković
Source: Self-asserted source
Milos Madic

Multi-response optimization in laser processing technologies by applying desirability function approach and response surface methodology based on grey relation analysis

Advances in Mechanical Engineering
2024-07 | Journal article
DOI: 10.1177/16878132241259029
Contributors: Miloš Madić; Velibor Marinković
Source: check_circle
Crossref

AN INVESTIGATION ON MEAN ROUGHNESS DEPTH AND MATERIAL EROSION SPEED DURING MANUFACTURING OF STAINLESS-STEEL MINIATURE RATCHET GEARS BY WIRE-EDM

Facta Universitatis, Series: Mechanical Engineering
2023 | Journal article
DOI: 10.22190/FUME221220012C
EID:

2-s2.0-85167836728

Part of ISSN: 23350164 03542025
Contributors: Chaubey, S.K.; Gupta, K.; Madić, M.
Source: Self-asserted source
Milos Madic via Scopus - Elsevier

Comparison of Aggregation Operators in the Group Decision-Making Process: A Real Case Study of Location Selection Problem

Sustainability (Switzerland)
2023 | Journal article
DOI: 10.3390/su15108229
EID:

2-s2.0-85160736451

Part of ISSN: 20711050
Contributors: Petrović, G.; Mihajlović, J.; Marković, D.; Hashemkhani Zolfani, S.; Madić, M.
Source: Self-asserted source
Milos Madic via Scopus - Elsevier

Cutting Parameters Optimization for Minimal Total Operation Time in Turning POM-C Cylindrical Stocks into Parts with Continuous Profile Using a PCD Cutting Tool

Metals
2023 | Journal article
DOI: 10.3390/met13020359
EID:

2-s2.0-85149211374

Part of ISSN: 20754701
Contributors: Trifunović, M.; Madić, M.; Marinković, D.; Marinković, V.
Source: Self-asserted source
Milos Madic via Scopus - Elsevier

Machining and Finishing Processes for Metals

Metals
2023 | Journal issue or edition
Part of ISSN: 2075-4701
Contributors: Milos Madic
Source: Self-asserted source
Milos Madic

Application of control charts in the analysis of measurement systems

39th INTERNATIONAL CONFERENCE ON PRODUCTION ENGINEERING OF SERBIA - ICPES 2023
2023-10 | Conference paper
Part of ISBN: 978-86-6022-610-7
Contributors: Predrag Janković; Milos Madic; Miodrag Hadžistević; Branko Štrbac
Source: Self-asserted source
Milos Madic

Application of dimensional analysis for modeling manufacturing processes: a review

Nonconventional Technologies Review
2023-06 | Journal article
Part of ISSN: 2359-8646
Contributors: Jelena Stanojković; Milos Madic
Source: Self-asserted source
Milos Madic

Optimization of surface roughness and its variance in CO2 laser cutting using desirability function approach

16th International Conference on Accomplishments in Mechanical and Industrial Engineering - DEMI 2023
2023-06 | Conference paper
Part of ISBN: 978-99976-11-04-8
Contributors: Velibor Marinković; Milos Madic; Predrag Janković
Source: Self-asserted source
Milos Madic

Empirical modeling methods of turning process: a review

Journal of Materials and Engineering
2023-04 | Journal article
Part of ISSN: 3009-3961
Contributors: Jelena Stanojković; Milos Madic; Dragan Lazarević
Source: Self-asserted source
Milos Madic

A gradient-based optimal control problem in creep-feed grinding

International Journal of Advanced Manufacturing Technology
2022 | Journal article
DOI: 10.1007/s00170-022-09609-y
EID:

2-s2.0-85134210247

Part of ISSN: 14333015 02683768
Contributors: Gostimirovic, M.; Madic, M.; Sekulic, M.; Rodic, D.; Aleksic, A.
Source: Self-asserted source
Milos Madic via Scopus - Elsevier
grade
Preferred source (of 2)‎

Analysis of process efficiency in laser fusion cutting and some single- and multi-objective optimization aspects

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
2022 | Journal article
DOI: 10.1177/09544089211062784
EID:

2-s2.0-85120678313

Part of ISSN: 20413009 09544089
Contributors: Madić, M.; Gadallah, M.H.; Petković, D.
Source: Self-asserted source
Milos Madic via Scopus - Elsevier
grade
Preferred source (of 3)‎

Application of a Robust Decision-Making Rule for Comprehensive Assessment of Laser Cutting Conditions and Performance

Machines
2022 | Journal article
DOI: 10.3390/machines10020153
EID:

2-s2.0-85125049894

Part of ISSN: 20751702
Contributors: Madić, M.; Petrović, G.; Petković, D.; Antucheviciene, J.; Marinković, D.
Source: Self-asserted source
Milos Madic via Scopus - Elsevier
grade
Preferred source (of 2)‎

Determining the Optimal Cutting Parameters for Required Productivity for the Case of Rough External Turning of AISI 1045 Steel with Minimal Energy Consumption

Metals
2022 | Journal article
DOI: 10.3390/met12111793
EID:

2-s2.0-85141718171

Part of ISSN: 20754701
Contributors: Stojković, M.; Madić, M.; Trifunović, M.; Turudija, R.
Source: Self-asserted source
Milos Madic via Scopus - Elsevier

MATHEMATICAL MODELLING OF THE CO2 LASER CUTTING PROCESS USING GENETIC PROGRAMMING

Facta Universitatis, Series: Mechanical Engineering
2022 | Journal article
DOI: 10.22190/FUME210810003M
EID:

2-s2.0-85134635714

Part of ISSN: 23350164 03542025
Contributors: Madić, M.; Gostimirović, M.; Rodić, D.; Radovanović, M.; Coteaţă, M.
Source: Self-asserted source
Milos Madic via Scopus - Elsevier
grade
Preferred source (of 2)‎

Optimal Synthesis of Loader Drive Mechanisms: A Group Robust Decision-Making Rule Generation Approach

Machines
2022 | Journal article
DOI: 10.3390/machines10050329
EID:

2-s2.0-85131689777

Part of ISSN: 20751702
Contributors: Petrović, G.; Pavlović, J.; Madić, M.; Marinković, D.
Source: Self-asserted source
Milos Madic via Scopus - Elsevier

Prediction of Friction Torque and Temperature on Axial Angular Contact Ball Bearings for Threaded Spindle Using Artificial Neural Network

Journal of Vibration Engineering and Technologies
2022 | Journal article
DOI: 10.1007/s42417-022-00461-8
EID:

2-s2.0-85126760672

Part of ISSN: 25233939 25233920
Contributors: Krstić, V.; Milčić, D.; Madić, M.; Milčić, M.; Milovančević, M.
Source: Self-asserted source
Milos Madic via Scopus - Elsevier

Application of software solution for solving engineering design optimization problems

IOP Conference Series: Materials Science and Engineering
2021 | Conference paper
DOI: 10.1088/1757-899X/1018/1/012025
EID:

2-s2.0-85100400314

Part of ISSN: 1757899X 17578981
Contributors: Madic, M.; Janković, P.; Trifunović, M.; Kovačević, M.
Source: Self-asserted source
Milos Madic via Scopus - Elsevier

Investigation of cutting and specific cutting energy in turning of POM-C using a PCD tool: Analysis and some optimization aspects

Journal of Cleaner Production
2021 | Journal article
DOI: 10.1016/j.jclepro.2021.127043
EID:

2-s2.0-85104469884

Part of ISSN: 09596526
Contributors: Trifunović, M.; Madić, M.; Janković, P.; Rodić, D.; Gostimirović, M.
Source: Self-asserted source
Milos Madic via Scopus - Elsevier
grade
Preferred source (of 2)‎

Predictions of friction coefficient in hydrodynamic journal bearing using artificial neural networks

Strojniski Vestnik/Journal of Mechanical Engineering
2021 | Journal article
DOI: 10.5545/sv-jme.2021.7230
EID:

2-s2.0-85115805337

Part of ISSN: 00392480
Contributors: Milčić, D.; Alsammarraie, A.; Madić, M.; Krstić, V.; Milčić, M.
Source: Self-asserted source
Milos Madic via Scopus - Elsevier

Stability analysis of the inverse heat transfer problem in the optimization of the machining process

Applied Thermal Engineering
2021 | Journal article
DOI: 10.1016/j.applthermaleng.2021.117174
EID:

2-s2.0-85108104386

Part of ISSN: 13594311
Contributors: Gostimirovic, M.; Sekulic, M.; Trifunovic, M.; Madic, M.; Rodic, D.
Source: Self-asserted source
Milos Madic via Scopus - Elsevier
grade
Preferred source (of 2)‎

Knee Prosthesis Biomaterial Selection by Using MCDM Solver

Advanced Technologies & Materials
2021-12-20 | Journal article
DOI: 10.24867/ATM-2021-2-006
Contributors: Dušan Petković; Miloš Madić; Goran Radenković
Source: check_circle
Crossref

The material selection of the heating plates used in the vulcanization process obtained using different MCDM methods

Advanced Technologies & Materials
2021-08-20 | Journal article
DOI: 10.24867/ATM-2021-1-004
Contributors: Jelena Mihajlović; Goran Petrović; Dušan Ćirić; Miloš Madić
Source: check_circle
Crossref

Application of ANFIS for modeling and predicting the EDM surface roughness

2020 19th International Symposium INFOTEH-JAHORINA, INFOTEH 2020 - Proceedings
2020 | Conference paper
DOI: 10.1109/INFOTEH48170.2020.9066284
EID:

2-s2.0-85085019879
Contributors: Rodic, D.; Gostimirovic, M.; Sekulic, M.; Aleksic, A.; Madic, M.
Source: Self-asserted source
Milos Madic via Scopus - Elsevier

Fuzzy model-based optimal energy control during the electrical discharge machining

Neural Computing and Applications
2020 | Journal article
DOI: 10.1007/s00521-020-04909-4
EID:

2-s2.0-85083740165

Part of ISSN: 14333058 09410643
Contributors: Rodic, D.; Gostimirovic, M.; Madic, M.; Sekulic, M.; Aleksic, A.
Source: Self-asserted source
Milos Madic via Scopus - Elsevier
grade
Preferred source (of 2)‎

Laser cutting optimization model with constraints: Maximization of material removal rate in CO<sub>2</sub> laser cutting of mild steel

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
2020 | Journal article
DOI: 10.1177/0954405420911529
EID:

2-s2.0-85083384823
Contributors: Madić, M.; Mladenović, S.; Gostimirović, M.; Radovanović, M.; Janković, P.
Source: Self-asserted source
Milos Madic via Scopus - Elsevier
grade
Preferred source (of 3)‎

Pareto optimization of multi-pass turning of grey cast iron with practical constraints using a deterministic approach

International Journal of Advanced Manufacturing Technology
2020 | Journal article
DOI: 10.1007/s00170-020-05994-4
EID:

2-s2.0-85089979251

Part of ISSN: 14333015 02683768
Contributors: Trifunović, M.; Madić, M.; Radovanović, M.
Source: Self-asserted source
Milos Madic via Scopus - Elsevier
grade
Preferred source (of 2)‎

ANALYSIS AND OPTIMIZATION OF SURFACE ROUGHNESS IN CO<sub>2</sub> LASER CUTTING OF P265GH STEEL

Proceedings on Engineering Sciences
2019 | Journal article
DOI: 10.24874/PES01.01.057
EID:

2-s2.0-85130309339
Contributors: Madić, M.; Janković, P.; Radovanović, M.; Petković, D.
Source: Self-asserted source
Milos Madic via Scopus - Elsevier

Comparison of three fuzzy MCDM methods for solving the supplier selection problem

Facta Universitatis, Series: Mechanical Engineering
2019 | Journal article
DOI: 10.22190/FUME190420039P
EID:

2-s2.0-85078420119

Part of ISSN: 23350164 03542025
Contributors: Petrović, G.; Mihajlović, J.; Ćojbašić, Ž.; Madić, M.; Marinković, D.
Source: Self-asserted source
Milos Madic via Scopus - Elsevier
grade
Preferred source (of 2)‎

Optimization of Surface Roughness from Different Aspects in High-Power CO<sub>2</sub> Laser Cutting of AA5754 Aluminum Alloy

Arabian Journal for Science and Engineering
2019 | Journal article
DOI: 10.1007/s13369-019-04037-9
EID:

2-s2.0-85069905863
Contributors: Janković, P.; Madić, M.; Radovanović, M.; Petković, D.; Mladenović, S.
Source: Self-asserted source
Milos Madic via Scopus - Elsevier
grade
Preferred source (of 2)‎

An approach for robust decision making rule generation: Solving transport and logistics decision making problems

Expert Systems with Applications
2018 | Journal article
DOI: 10.1016/j.eswa.2018.03.065
EID:

2-s2.0-85045567438

Part of ISSN: 09574174
Contributors: Petrović, G.S.; Madić, M.; Antucheviciene, J.
Source: Self-asserted source
Milos Madic via Scopus - Elsevier
grade
Preferred source (of 2)‎

Analysis and modeling of the effects of process parameters on specific cutting energy in abrasive water jet cutting

Thermal Science
2018 | Journal article
DOI: 10.2298/TSCI18S5459J
EID:

2-s2.0-85060109659

Part of ISSN: 03549836
Contributors: Janković, P.L.; Madić, M.J.; Petković, D.L.; Radovanović, M.R.
Source: Self-asserted source
Milos Madic via Scopus - Elsevier
grade
Preferred source (of 3)‎

Evolutionary multi-objective optimization of energy efficiency in electrical discharge machining

Journal of Mechanical Science and Technology
2018 | Journal article
DOI: 10.1007/s12206-018-0925-y
EID:

2-s2.0-85055349397

Part of ISSN: 1738494X
Contributors: Gostimirovic, M.; Pucovsky, V.; Sekulic, M.; Radovanovic, M.; Madic, M.
Source: Self-asserted source
Milos Madic via Scopus - Elsevier
grade
Preferred source (of 2)‎

Implementation of computationally efficient taguchi robust design procedure for development of ann fuel consumption prediction models

Transport
2018 | Journal article
DOI: 10.3846/transport.2018.5174
EID:

2-s2.0-85064006990

Part of ISSN: 16483480 16484142
Contributors: Predić, B.; Madić, M.; Roganović, M.; Karabašević, D.; Stanujkić, D.
Source: Self-asserted source
Milos Madic via Scopus - Elsevier
grade
Preferred source (of 2)‎

Inverse electro-thermal analysis of the material removal mechanism in electrical discharge machining

International Journal of Advanced Manufacturing Technology
2018 | Journal article
DOI: 10.1007/s00170-018-2074-y
EID:

2-s2.0-85046472453

Part of ISSN: 14333015 02683768
Contributors: Gostimirovic, M.; Radovanovic, M.; Madic, M.; Rodic, D.; Kulundzic, N.
Source: Self-asserted source
Milos Madic via Scopus - Elsevier
grade
Preferred source (of 2)‎

Minimization of production time in turning process considering tool life and other non-linear constraints using pareto technique

UPB Scientific Bulletin, Series D: Mechanical Engineering
2018 | Journal article
EID:

2-s2.0-85051207882

Part of ISSN: 14542358
Contributors: Madić, M.; Radovanović, M.; Kovačević, M.
Source: Self-asserted source
Milos Madic via Scopus - Elsevier

Application of the performance selection index method for solving machining MCDM problems

Facta Universitatis, Series: Mechanical Engineering
2017 | Journal article
DOI: 10.22190/FUME151120001P
EID:

2-s2.0-85017262022

Part of ISSN: 23350164 03542025
Contributors: Petković, D.; Madić, M.; Radovanović, M.; Gečevska, V.
Source: Self-asserted source
Milos Madic via Scopus - Elsevier
grade
Preferred source (of 2)‎
Items per page:
Page 1 of 3

Peer review (12 reviews for 5 publications/grants)

Review activity for Experimental techniques. (1)
Review activity for International journal, advanced manufacturing technology. (7)
Review activity for Journal of the Brazilian Society of Mechanical Sciences and Engineering. (1)
Review activity for Optics and Laser Technology. (2)
Review activity for Process integration and optimization for sustainability. (1)
How many people are using ORCID?