Personal information

Verified email addresses

materials processing, machining, optimization
India

Activities

Employment (1)

Vellore Institute of Technology University: Vellore, Tamil Nadu, IN

2012-06-07 to 2023-06-30 | Professor (School of Mechanical Engineering)
Employment
Source: Self-asserted source
Ramanujam R

Works (39)

Effect of different laser texture configurations on improving surface wettability and wear characteristics of Ti6Al4V implant material

Journal of the Brazilian Society of Mechanical Sciences and Engineering
2023 | Journal article
EID:

2-s2.0-85161904407

Part of ISSN: 18063691 16785878
Contributors: Velayuthaperumal, S.; Radhakrishnan, R.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier
grade
Preferred source (of 2)‎

A novel use of twisted continuous carbon fibers in additive manufacturing of composites

Materials Today: Proceedings
2021 | Conference paper
EID:

2-s2.0-85114170554

Part of ISSN: 22147853
Contributors: Aravind, A.U.; Bhagat, A.R.; Radhakrishnan, R.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

Characterization and Electrochemical Corrosion Analysis of Heat-Treated Reinforced Ha Coatings Deposited by Vacuum Plasma Spray Technique

Surface Review and Letters
2021 | Journal article
EID:

2-s2.0-85110614364

Part of ISSN: 0218625X
Contributors: Singh Kang, A.; Singh, G.; Chawla, V.; Prakash, C.; Radhakrishnan, R.; Wu, L.Y.; Zheng, H.Y.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

Machinability investigations on aerospace custom 450 alloy using TiAlN/TiCN, TiCN/TiAlN coated and uncoated carbide tools

Journal Europeen des Systemes Automatises
2021 | Journal article
EID:

2-s2.0-85105572983

Part of ISSN: 21167087 12696935
Contributors: Thepperumal, S.K.; Margabandu, V.; Radhakrishnan, R.; Amaladas, J.R.; Ananthakrishnan, S.V.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

Multi Objective Study on Machining Characteristics of AISI H-11 Tool Steel Prepared by Different Processing Techniques

Journal Européen des Systèmes Automatisés​
2021-04-27 | Journal article
Part of ISSN: 1269-6935
Part of ISSN: 2116-7087
Source: Self-asserted source
Ramanujam R
grade
Preferred source (of 2)‎

Machining of Ti–6Al–4V using diffusion annealed zinc-coated brass wire in WEDHT

Journal of the Brazilian Society of Mechanical Sciences and Engineering
2019-09 | Journal article
Contributors: M. Vignesh; R. Ramanujam
Source: check_circle
Crossref

Multi-response optimization of process parameters of green electrical discharge machining on aisi 2507 super duplex stainless steel using grey relational analysis (Gra)

International Journal of Mechanical and Production Engineering Research and Development
2018 | Journal article
EID:

2-s2.0-85050009447

Part of ISSN: 22498001 22496890
Contributors: Viswanthvaleti, S.; Radhakrishnan, R.; Rajyalakshmi, G.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

Effectiveness evaluation of molten salt processing and ultrasonic cavitation techniques during the production of aluminium based hybrid nanocomposites - An experimental investigation

Journal of Alloys and Compounds
2018-06 | Journal article
Contributors: C. Kannan; R. Ramanujam
Source: check_circle
Crossref

Mechanical and tribological behaviour of molten salt processed self-lubricated aluminium composite under different treatments

Materials Research Express
2018-05-25 | Journal article
Contributors: C Kannan; R Ramanujam
Source: check_circle
Crossref

Machinability studies on Al 7075/BN/Al2O3 squeeze cast hybrid nanocomposite under different machining environments

Materials and Manufacturing Processes
2018-04-04 | Journal article
Contributors: C. Kannan; R. Ramanujam; A. S. S. Balan
Source: check_circle
Crossref

Comparative study on the mechanical and microstructural characterisation of AA 7075 nano and hybrid nanocomposites produced by stir and squeeze casting

Journal of Advanced Research
2017 | Journal article
EID:

2-s2.0-85016312580

Contributors: Kannan, C.; Ramanujam, R.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

Investigation of machinability characteristics and chip morphology study in laser-assisted machining of Inconel 718

International Journal of Advanced Manufacturing Technology
2017 | Journal article
EID:

2-s2.0-85010992337

Contributors: Venkatesan, K.; Ramanujam, R.; Kuppan, P.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

Improvement of Machinability using Laser-Aided Hybrid Machining for Inconel 718 Alloy

Materials and Manufacturing Processes
2016 | Journal article
EID:

2-s2.0-84978543427

Contributors: Venkatesan, K.; Ramanujam, R.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

Optimisation of machining parameters in laser aided hybrid machining of Inconel 718

International Journal of Machining and Machinability of Materials
2016 | Journal article
EID:

2-s2.0-84969265063

Contributors: Venkatesan, K.; Ramanujam, R.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

Parametric modeling and optimization of laser scanning parameters during laser assisted machining of Inconel 718

Optics and Laser Technology
2016 | Journal article
EID:

2-s2.0-84944789868

Contributors: Venkatesan, K.; Ramanujam, R.; Kuppan, P.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

Statistical approach for optimization of influencing parameters in laser assisted machining (LAM) of Inconel alloy

Measurement: Journal of the International Measurement Confederation
2016 | Journal article
EID:

2-s2.0-84963677660

Contributors: Venkatesan, K.; Ramanujam, R.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

Use of new multi-layered coated carbide insert for machining aluminium metal matrix composites reinforced with alumina particles – experimental approach

International Journal of Applied Engineering Research
2015 | Journal article
EID:

2-s2.0-84926442448

Contributors: Ramanujam, R.; Rahul, A.; Antony, M.; Ram Praful, C.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

A review on conventional and laser assisted machining of aluminium based metal matrix composites

Engineering Review
2014 | Journal article
EID:

2-s2.0-84902129921

Contributors: Venkatesan, K.; Ramanujam, R.; Kuppan, P.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

Analysis of cutting forces and temperature in laser assisted machining of inconel 718 using taguchi method

Procedia Engineering
2014 | Conference paper
EID:

2-s2.0-84922309329

Contributors: Venkatesan, K.; Ramanujam, R.; Kuppan, P.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

Comparative study of composites reinforced with SiC and TiB<inf>2</inf>

Procedia Engineering
2014 | Conference paper
EID:

2-s2.0-84922334041

Contributors: Johny James, S.; Venkatesan, K.; Kuppan, P.; Ramanujam, R.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

Fabrication, surface morphology and corrosion investigation of Al 7075-Al<inf>2</inf>O<inf>3</inf> matrix composite in sea water and industrial environment

Procedia Engineering
2014 | Conference paper
EID:

2-s2.0-84922327504

Contributors: Shanbhag, V.V.; Yalamoori, N.N.; Karthikeyan, S.; Ramanujam, R.; Venkatesan, K.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

Hybrid aluminium metal matrix composite reinforced with SiC and TiB<inf>2</inf>

Procedia Engineering
2014 | Conference paper
EID:

2-s2.0-84922294221

Contributors: Johny James, S.; Venkatesan, K.; Kuppan, P.; Ramanujam, R.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

Influence of cutting parameters on dry machining of inconel 625 alloy with coated carbide insert - a statistical approach

ARPN Journal of Engineering and Applied Sciences
2014 | Journal article
EID:

2-s2.0-84897008379

Contributors: Venkatesan, K.; Ramanujam, R.; Saxena, V.; Chawdhury, N.; Choudhary, V.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

Influence of cutting parameters on machinability of inconel 718 alloy with coated carbide insert-a taguchi based fuzzy logic approach (TFLA)

ARPN Journal of Engineering and Applied Sciences
2014 | Journal article
EID:

2-s2.0-84901193386

Contributors: Ramanujam, R.; Venkatesan, K.; Saxena, V.; Chawdhury, N.; Choudhary, V.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

Laser assisted machining of difficult to cut materials: Research opportunities and future directions - A comprehensive review

Procedia Engineering
2014 | Conference paper
EID:

2-s2.0-84922323163

Contributors: Venkatesan, K.; Ramanujam, R.; Kuppan, P.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

Multi-response optimization using anova and desirability function analysis: A case study in end milling of inconel alloy

ARPN Journal of Engineering and Applied Sciences
2014 | Journal article
EID:

2-s2.0-84898974741

Contributors: Ramanujam, R.; Maiyar, L.M.; Venkatesan, K.; Vasan, M.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

Optimization of machining parameters using fuzzy based principal component analysis during dry turning operation of inconel 625 - A hybrid approach

Procedia Engineering
2014 | Conference paper
EID:

2-s2.0-84922270708

Contributors: Ramanujam, R.; Venkatesan, K.; Saxena, V.; Pandey, R.; Harsha, T.; Kumar, G.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

Optimization of the Pulsed Current Gas Tungsten Arc welding process parameters for alloy C-276 using the Taguchi method

Procedia Engineering
2014 | Conference paper
EID:

2-s2.0-84922333133

Contributors: Manikandan, M.; Nageswara Rao, M.; Ramanujam, R.; Ramkumar, D.; Arivazhagan, N.; Reddy, G.M.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

Performance evaluation of coated carbide inserts on dry machining of Al-B4C metal matrix composites using Taguchi's Robust design and weighted grey analysis

ARPN Journal of Engineering and Applied Sciences
2014 | Journal article
EID:

2-s2.0-84898944510

Contributors: Venkatesan, K.; Ramanujam, R.; Kumar, M.R.; Reddy, S.J.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

Study of cutting force and surface roughness in machining of Al alloy hybrid composite and optimized using response surface methodology

Procedia Engineering
2014 | Conference paper
EID:

2-s2.0-84922271667

Contributors: Venkatesan, K.; Ramanujam, R.; Joel, J.; Jeyapandiarajan, P.; Vignesh, M.; Tolia, D.J.; Krishna, R.V.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

A precursor experimental study on corrosion resistant AA6061-SiCp MMC prepared through PM process using ANOVA and grey relational analysis - A novel approach

Journal of Corrosion Science and Engineering
2013 | Journal article
EID:

2-s2.0-84879827622

Contributors: Uma Sankar, V.; Ramanujam, R.; Karthikeyan, S.; Anthony Xavior, M.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

Multi-response optimization of machining parameters in turning hybrid metal matrix composites reinforced with graphite particles for tribological applications

International Journal of Applied Engineering Research
2013 | Journal article
EID:

2-s2.0-84886674448

Contributors: Ramanujam, R.; Venkatesan, K.; Vijayan, S.; Raju, R.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

Optimization of machining parameters for end milling of Inconel 718 super alloy using Taguchi based grey relational analysis

Procedia Engineering
2013 | Conference paper
EID:

2-s2.0-84891798587

Contributors: Maiyar, L.M.; Ramanujam, R.; Venkatesan, K.; Jerald, J.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

Fabrication and turning of Al/SiC/B<inf>4</inf>C hybrid metal matrix composites optimization using desirability analysis

Journal of the Chinese Institute of Industrial Engineers
2012 | Journal article
EID:

2-s2.0-84870595781

Contributors: Muthukrishnan, N.; Babu, T.S.M.; Ramanujam, R.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

Optimization of UV crosslinked SBS block copolymers with the help of statistical test planning | Optimierung UV-vernetzter SBS-blockcopolymere mit hilfe statistischer versuchsplanung

Gummi, Fasern, Kunststoffe
2012 | Other
EID:

2-s2.0-84871181635

Contributors: Datta, S.; Ramanujam, R.; Bhardwaj, Y.K.; Sabharwal, S.; Naskar, K.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

Application of Taguchi's orthogonal array in reducing the NO <inf>x</inf> emission of a stationary diesel engine

International Journal of Oil, Gas and Coal Technology
2011 | Journal article
EID:

2-s2.0-84255169244

Contributors: Saravanan, S.; Nagarajan, G.; Ramanujam, R.; Sampath, S.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

Controlling NOx Emission of Crude Rice Bran Oil Blend for Sustainable Environment

Clean - Soil, Air, Water
2011 | Journal article
EID:

2-s2.0-79959343886

Contributors: Saravanan, S.; Nagarajan, G.; Ramanujam, R.; Sampath, S.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

Optimization of cutting parameters for turning Al-SiC(10p) MMC using ANOVA and Grey relational analysis

International Journal of Precision Engineering and Manufacturing
2011 | Journal article
EID:

2-s2.0-79961042353

Contributors: Ramanujam, R.; Muthukrishnan, N.; Raju, R.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

Optimization of machining parameters for turning Al-Sic (10p) MMC using Taguchi grey relational analysis

International Journal of Industrial Engineering : Theory Applications and Practice
2011 | Journal article
EID:

2-s2.0-84859742008

Contributors: Ramanujam, R.; Raju, R.; Muthukrishnan, N.
Source: Self-asserted source
Ramanujam R via Scopus - Elsevier

Peer review (1 review for 1 publication/grant)

Review activity for Experimental techniques. (1)