Personal information

Other IDs

Scopus Author ID: 56113885800
Scopus Author ID: 57223230401

Keywords

Alloy Design, Physical Metallurgy, Bio materials, Molecular Dynamics

Activities

Collapse all

Works (50 of 112)

Items per page:
Page 1 of 3

Effects of alloying and grain boundary on primary irradiation defects in FeNiCrCoCu high entropy alloys: A molecular dynamics study

Materials Today Communications
2025-04 | Journal article
DOI: 10.1016/j.mtcomm.2025.112237
Contributors: Belal Almomani; Mosab Jaser Banisalman; Omarelfarouq Elgack; Junaidi Syarif
Source: check_circle
Crossref

A Representative Volume Element Model for Investigating the Hydride Inclusion Effect on Ductility of Zry-Based Nuclear Fuel Cladding

Arabian Journal for Science and Engineering
2025-03 | Journal article
DOI: 10.1007/s13369-023-08264-z
Contributors: Belal Almomani; Junaidi Syarif; Yoon-Suk Chang
Source: check_circle
Crossref

Microstructure and mechanical properties of selective laser melted 17–4 PH stainless steel; Build direction and heat treatment processes

Materials Today Communications
2023-08 | Journal article
DOI: 10.1016/j.mtcomm.2023.106479
Part of ISSN: 2352-4928
Contributors: MOHAMMAD AZLAN ARIPIN; Zainuddin Sajuri; Nashrah Hani Jamadon; Amir Hossein Baghdadi; Intan Fadhlina Mohamed; Junaidi Syarif; Ahmad Muhammad Aziz; Fathin Iliana Jamhari
Source: Self-asserted source
Junaidi Syarif

Termite as Biomimicry Solution for Enhancing Building Envelope: A Comparative Model Case Study in the UAE

2023-08-30 | Conference paper
DOI: 10.4028/p-sRT4Zz
Contributors: Khalid AlShuhail; Abdelsalam Aldawoud; Syarif Junaidi
Source: check_circle
Crossref

Molecular dynamics simulation and machine learning-based analysis for predicting tensile properties of high-entropy FeNiCrCoCu alloys

Journal of Materials Research and Technology
2023-07 | Journal article
DOI: 10.1016/j.jmrt.2023.07.023
Contributors: Omarelfarouq Elgack; Belal Almomani; Junaidi Syarif; Mohamed Elazab; Mohammad Irshaid; Mohammad Al-Shabi
Source: check_circle
Crossref

Evaluation of decellularization process for developing osteogenic bovine cancellous bone scaffolds in-vitro

PLOS ONE
2023-04-05 | Journal article
DOI: 10.1371/journal.pone.0283922
Contributors: Ali Al Qabbani; JJ Cray; K. G. Aghila Rani; Junaidi Syarif; Sausan AlKawas; Suzina Sheikh Abdul Hamid; A. R. Samsudin; Ahmad Azlina
Source: check_circle
Crossref

A machine learning framework for discovering high entropy alloys phase formation drivers

Heliyon
2023-01 | Journal article
DOI: 10.1016/j.heliyon.2023.e12859
Contributors: Junaidi Syarif; Mahmoud B. Elbeltagy; Ali Bou Nassif
Source: check_circle
Crossref

Deformation behavior of single-crystal magnesium during Nano-ECAP simulation

Heliyon
2022-12 | Journal article
DOI: 10.1016/j.heliyon.2022.e11837
Part of ISSN: 2405-8440
Contributors: Amro Altoyuri; Junaidi Syarif; Zainuddin Sajuri
Source: Self-asserted source
Junaidi Syarif

Effects of Build Orientations on Microstructure Evolution, Porosity Formation, and Mechanical Performance of Selective Laser Melted 17-4 PH Stainless Steel

Metals
2022-11-17 | Journal article
DOI: 10.3390/met12111968
Contributors: Mohammad Azlan Aripin; Zainuddin Sajuri; Nashrah Hani Jamadon; Amir Hossein Baghdadi; Junaidi Syarif; Intan Fadhlina Mohamed; Ahmad Muhammad Aziz
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Prediction of phase and hardness of HEAs based on constituent elements using machine learning models

Materials Today Communications
2022-06 | Journal article
DOI: 10.1016/j.mtcomm.2022.103407
Contributors: Mahmoud Bakr; Junaidi Syarif; Ibrahim Abaker Targio Hashem
Source: check_circle
Crossref

Equal channel angular pressing of single crystal aluminum: a molecular dynamics simulation

Journal of Materials Research and Technology
2022-03 | Journal article
DOI: 10.1016/j.jmrt.2022.01.061
Contributors: Junaidi Syarif; Amro Altoyuri; Intan Fadhlina Mohamed
Source: check_circle
Crossref

Molecular dynamics simulation of the amorphization and alloying of a mechanically milled Fe-Cu system

Journal of Non-Crystalline Solids
2022-03-15 | Journal article
DOI: 10.1016/j.jnoncrysol.2022.121410
Part of ISSN: 0022-3093
Source: Self-asserted source
Junaidi Syarif

Analysis of ultrashort laser pulses on thin metal films using the hyperbolic dual phase lag model

Computational Thermal Sciences
2021 | Journal article
DOI: 10.1615/ComputThermalScien.2021036376
EID:

2-s2.0-85102080028

Part of ISSN: 19402554 19402503
Contributors: Badawy, K.; Hisham, M.; Junaidi, S.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

Computational modelling of cold rolling of ferritic iron containing ε-Cu precipitates

Materials Today Communications
2021 | Journal article
DOI: 10.1016/j.mtcomm.2021.102253
EID:

2-s2.0-85102802276

Part of ISSN: 23524928
Contributors: Syarif, J.; Badawy, K.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

Atomistic simulation of the diffusion behavior in Al-Fe

Nuclear Materials and Energy
2021-12-01 | Journal article
DOI: 10.1016/j.nme.2021.101073
Part of ISSN: 2352-1791
Source: Self-asserted source
Junaidi Syarif

Ball Milling Effect on Corrosion and Biocompatibility Behavior of FeMnC Alloys Produced by Powder Metallurgy in Simulated Body Fluids Environment

Metals
2021-10-09 | Journal article
DOI: 10.3390/met11101597
Contributors: Junaidi Syarif; Yudha Pratesa; Yudi Prasetyo; Sri Harjanto
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Enhancing the performance of compressed soil bricks with natural additives: Wood chips and date palm fibers

Construction and Building Materials
2021-08 | Journal article
DOI: 10.1016/j.conbuildmat.2021.123611
Part of ISSN: 0950-0618
Source: Self-asserted source
Junaidi Syarif
grade
Preferred source (of 2)‎

A multiscale approach for modeling metal laser welding

AIP Advances
2021-03-01 | Journal article
DOI: 10.1063/5.0043764
Contributors: Khaled Badawy; Junaidi Syarif
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Cold-rolling strain hardening effect on the microstructure, serration-flow behaviour and dislocation density of friction stir welded AA5083

Metals
2020 | Journal article
DOI: 10.3390/met10010070
EID:

2-s2.0-85077627947

Part of ISBN:

20754701
Contributors: Sajuri, Z.; Selamat, N.F.M.; Baghdadi, A.H.; Rajabi, A.; Omar, M.Z.; Kokabi, A.H.; Syarif, J.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

Influence of alloying elements on cellular response and in-vitro corrosion behavior of titanium-molybdenum-chromium alloys for implant materials

Journal of Prosthodontic Research
2020 | Journal article
DOI: 10.1016/j.jpor.2020.01.004
EID:

2-s2.0-85079391943

Part of ISBN:

18831958
Contributors: Mat-Baharin, N.H.; Razali, M.; Mohd-Said, S.; Syarif, J.; Muchtar, A.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

Model predictive control approach for the system of multi input single output

Journal of Physics: Conference Series
2020 | Conference paper
DOI: 10.1088/1742-6596/1700/1/012101
EID:

2-s2.0-85099566489

Part of ISSN: 17426596 17426588
Contributors: Khairudin, M.; Herlambang, S.P.; Siswanto, I.; Tirantini, D.; Syarif, J.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

Effect of Partial Solution Treatment Temperature on Microstructure and Tensile Properties of 440C Martensitic Stainless Steel

Metals
2020-05-25 | Journal article
DOI: 10.3390/met10050694
Contributors: Junaidi Syarif; Mohammad H. Yousuf; Zainuddin Sajuri; Amir Hossein Baghdadi; Mahdi Merabtene; Mohd Zaidi Omar
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Alloying behaviour and microstructural changes of a Ti-10%Mo-10%Cr alloy on sintering process

Sains Malaysiana
2018 | Journal article
DOI: 10.17576/jsm-2018-4704-21
EID:

2-s2.0-85047961701
Contributors: Syarif, J.; Kurniawan, E.; Rohmannudin, T.N.; Rasani, M.R.; Sajuri, Z.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

Change in Tensile Properties of Dual-Phase Steels by Cu Addition

Transactions of the Indian Institute of Metals
2018 | Journal article
DOI: 10.1007/s12666-017-1182-y
EID:

2-s2.0-85027107936
Contributors: Syarif, J.; Handra, N.; Sajuri, Z.; Omar, M.Z.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

The influence of machining condition and cutting tool wear on surface roughness of AISI 4340 steel

IOP Conference Series: Materials Science and Engineering
2018 | Conference paper
DOI: 10.1088/1757-899X/290/1/012017
EID:

2-s2.0-85042269047
Contributors: Natasha, A.R.; Ghani, J.A.; Che Haron, C.H.; Syarif, J.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

Effect of tensile strain rates on flow stress for extruded AZ31 and AZ61 magnesium alloys

International Journal of Automotive and Mechanical Engineering
2017 | Journal article
DOI: 10.15282/ijame.14.1.2017.1.0311
EID:

2-s2.0-85028506002
Contributors: Latif, N.A.; Sajuri, Z.; Syarif, J.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

Parameter optimization of sintering Ti-6Al-7Nb powder and palm stearin binder system for the highest sintered density using the Taguchi method

Journal of Mechanical Engineering
2017 | Journal article
EID:

2-s2.0-85041060387
Contributors: Ahmad, R.N.; Muhamad, N.; Wahi, A.; Junaidi, S.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

Effect of loading rate on fracture behaviour of Mg-Al-Zn alloys

Jurnal Teknologi
2016 | Journal article
DOI: 10.11113/jt.v78.9151
EID:

2-s2.0-84975454550
Contributors: Latif, N.A.; Sajuri, Z.; Syarif, J.; Miyashita, Y.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

Effect of sputtering target's grain size on the sputtering yield, particle size and coercivity (Hc) of Ni and Ni20Al thin films

IOP Conference Series: Materials Science and Engineering
2016 | Conference paper
DOI: 10.1088/1757-899X/114/1/012116
EID:

2-s2.0-84973091469
Contributors: Reza, M.; Sajuri, Z.; Yunas, J.; Syarif, J.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

Temperature at the tool-chip interface in cryogenic and dry turning of AISI 4340 using carbide tool

International Journal of Simulation Modelling
2016 | Journal article
DOI: 10.2507/IJSIMM15(2)1.314
EID:

2-s2.0-85016231517
Contributors: Natasha, A.R.; Ghani, J.A.; Che Haron, C.H.; Syarif, J.; Musfirah, A.H.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

TRIZ approach for machining process innovation in cryogenic environment

International Journal of Materials and Product Technology
2016 | Journal article
DOI: 10.1504/IJMPT.2016.079200
EID:

2-s2.0-84989231089
Contributors: Ghani, J.A.; Natasha, A.R.; Che Hassan, C.H.; Syarif, J.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

Characterization of Hydroxyapatite/TI6AL4V composite powder under various sintering temperature

Jurnal Teknologi
2015 | Journal article
DOI: 10.11113/jt.v75.5168
EID:

2-s2.0-84940180315
Contributors: Arifin, A.; Sulong, A.B.; Muhamad, N.; Syarif, J.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

Detection of tube defect using the autoregressive algorithm

Steel and Composite Structures
2015 | Journal article
DOI: 10.12989/scs.2015.19.1.131
EID:

2-s2.0-84935431717
Contributors: Halim, Z.A.; Jamaludin, N.; Junaidi, S.; Yusainee, S.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

Powder injection molding of HA/Ti6Al4V composite using palm stearin as based binder for implant material

Materials and Design
2015 | Journal article
DOI: 10.1016/j.matdes.2014.10.039
EID:

2-s2.0-84918539629
Contributors: Arifin, A.; Sulong, A.B.; Muhamad, N.; Syarif, J.; Ramli, M.I.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

The effects of Mg addition on the microstructure and mechanical properties of thixoformed Al-5%Si-Cu alloys

Journal of Alloys and Compounds
2015 | Journal article
DOI: 10.1016/j.jallcom.2014.09.152
EID:

2-s2.0-84908374926
Contributors: Salleh, M.S.; Omar, M.Z.; Syarif, J.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

Vibration impact acoustic emission technique for identification and analysis of defects in carbon steel tubes: Part A Statistical analysis

Journal of Mechanical Science and Technology
2015 | Journal article
DOI: 10.1007/s12206-015-0327-3
EID:

2-s2.0-84928314504
Contributors: Halim, Z.A.; Jamaludin, N.; Junaidi, S.; Yahya, S.Y.S.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

Vibration impact acoustic emission technique for identification and analysis of defects in carbon steel tubes: Part B Cluster analysis

Journal of Mechanical Science and Technology
2015 | Journal article
DOI: 10.1007/s12206-015-0328-2
EID:

2-s2.0-84928345673
Contributors: Halim, Z.A.; Jamaludin, N.; Junaidi, S.; Yahya, S.Y.S.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

A review of the fatigue failure mechanism of metallic materials under a corroded environment

Engineering Failure Analysis
2014 | Journal article
DOI: 10.1016/j.engfailanal.2014.04.016
EID:

2-s2.0-84899925654
Contributors: Mansor, N.I.I.; Abdullah, S.; Ariffin, A.K.; Syarif, J.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

Chip formation and coefficient of friction in turning S45C medium carbon steel

International Journal of Mechanical and Mechatronics Engineering
2014 | Journal article
EID:

2-s2.0-84920035052
Contributors: Natasha, A.R.; Othman, H.; Ghani, J.A.; Che Haron, C.H.; Syarif, J.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

Comparison of dry and cryogenic machining on chip formation and coefficient of friction in turning AISI 4340 alloy steel

Applied Mechanics and Materials
2014 | Book
DOI: 10.4028/www.scientific.net/AMM.554.7
EID:

2-s2.0-84903537468
Contributors: Raof, N.A.; Ghani, J.A.; Syarif, J.; Haron, C.H.C.; Hadi, M.A.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

Detection and analysis of defect in steel tube using Vibration Impact Acoustic Emission (VIAE) method

International Review of Mechanical Engineering
2014 | Journal article
EID:

2-s2.0-84897839325
Contributors: Zakiah, A.H.; Jamaludin, N.; Syarif, J.; Yahya, S.Y.S.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

Development and application of tool wear: A review of the characterization of TiC-based cermets with different binders

Chemical Engineering Journal
2014 | Journal article
DOI: 10.1016/j.cej.2014.06.078
EID:

2-s2.0-84904131881
Contributors: Rajabi, A.; Ghazali, M.J.; Syarif, J.; Daud, A.R.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

Effect of strain rate on tensile and work hardening properties for Al-Zn magnesium alloys

International Journal of Materials Engineering Innovation
2014 | Journal article
DOI: 10.1504/IJMATEI.2014.059487
EID:

2-s2.0-84894664989
Contributors: Abdul Latif, N.; Sajuri, Z.; Junaidi, S.; Miyashita, Y.; Mutoh, Y.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

Effects of Cu on the microstructures and tensile properties of thixoformed Al-Si alloys

Solid State Phenomena
2014 | Book
DOI: 10.4028/www.scientific.net/SSP.217-218.91
EID:

2-s2.0-84914154756
Contributors: Salleh, M.S.; Omar, M.Z.; Syarif, J.; Alhawari, K.S.; Mohammed, M.N.; Salleh, M.S.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

Evolution of globular microstructures during direct partial re-melting experiment of AISI D2 tool steel

Applied Mechanics and Materials
2014 | Book
DOI: 10.4028/www.scientific.net/AMM.465-466.829
EID:

2-s2.0-84891945874
Contributors: Mohammed, M.N.; Omar, M.Z.; Syarif, J.; Sajuri, Z.; Salleh, M.S.; Alhawari, K.S.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

Fatigue and mechanical properties of aluminium-copper bi-metal tubes

Advanced Materials Research
2014 | Book
DOI: 10.4028/www.scientific.net/AMR.896.626
EID:

2-s2.0-84896286464
Contributors: Sajuri, Z.; Baghdadi, A.; Mahmod, M.F.; Syarif, J.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

HA/Ti6Al4V powder with palm stearin binder system - Feedstock characterization

Applied Mechanics and Materials
2014 | Book
DOI: 10.4028/www.scientific.net/AMM.564.372
EID:

2-s2.0-84903544507
Contributors: Arifin, A.; Sulong, A.B.; Muhamad, N.; Syarif, J.; Ramli, M.I.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

Influence of oxygen on microstructures of Ti-Mo-Cr alloy

Advanced Materials Research
2014 | Book
DOI: 10.4028/www.scientific.net/AMR.896.613
EID:

2-s2.0-84896306450
Contributors: Syarif, J.; Kurniawan, E.; Rasani, M.R.; Sajuri, Z.; Omar, M.Z.; Harjanto, S.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

Material processing of hydroxyapatite and titanium alloy (HA/Ti) composite as implant materials using powder metallurgy: A review

Materials and Design
2014 | Journal article
DOI: 10.1016/j.matdes.2013.09.045
EID:

2-s2.0-84886617556
Contributors: Arifin, A.; Sulong, A.B.; Muhamad, N.; Syarif, J.; Ramli, M.I.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier

Microstructural change of a Ti-10at%Mo-10at%Cr alloy on sintering process

Applied Mechanics and Materials
2014 | Book
DOI: 10.4028/www.scientific.net/AMM.663.266
EID:

2-s2.0-84922023925
Contributors: Kurniawan, E.; Syarif, J.; Sajuri, Z.; Rasani, M.R.
Source: Self-asserted source
Junaidi Syarif via Scopus - Elsevier
Items per page:
Page 1 of 3

Peer review (3 reviews for 3 publications/grants)

Review activity for Construction & building materials. (1)
Review activity for Journal of Materials Research and Technology. (1)
Review activity for Results in physics. (1)
How many people are using ORCID?