Personal information

Emails & domains

Verified email domains

Other IDs

ResearcherID: H-4521-2015
Scopus Author ID: 7102422789
Loop profile: 1241345

Keywords

Mechanics of materials

Activities

Collapse all

Employment (1)

Universidad Rey Juan Carlos: Mostoles , Madrid , ES

Catedrática de Universidad (Tecnología Química, Energética y Mecánica )
Employment
Source: Self-asserted source
Alicia Salazar

Professional activities (1)

Sociedad Española de Integridad Estructural-Grupo Español de Fractura: Madrid, Madrid, ES

Membership
Source: Self-asserted source
Alicia Salazar

Works (50 of 65)

Items per page:
Page 1 of 2

Aging effects on the structural integrity of carboxyl terminated polybutadiene propellants

Theoretical and Applied Fracture Mechanics
2025-04 | Journal article
DOI: 10.1016/j.tafmec.2024.104828
Part of ISSN: 0167-8442
Contributors: Mario Martínez; Raúl López; Jesús Rodríguez; Alicia Salazar
Source: Self-asserted source
Alicia Salazar

Assessment of the viscoelasticity effects on the fracture resistance of polyacrylamide-alginate hydrogels

Engineering Fracture Mechanics
2025-03 | Journal article
DOI: 10.1016/j.engfracmech.2025.111105
Contributors: A. Salazar; M. Martínez; C. Reinhards; A. Rico; J. Rodríguez
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

The Challenges of Thermosetting Polymers Metallisation via Low-Pressure Cold Spray

2024 | Book chapter
DOI: 10.1007/978-981-99-8643-9_42
Contributors: Davide Verdi; David Merino-Millan; Alicia Salazar; Pedro Poza
Source: check_circle
Crossref

Structural integrity of polymers processed by additive manufacturing techniques using residual strength diagrams

Theoretical and Applied Fracture Mechanics
2024-12 | Journal article
DOI: 10.1016/j.tafmec.2024.104727
Contributors: A.J. Cano; A. Salazar; J. Rodríguez
Source: check_circle
Crossref

Metallisation of additive manufactured polyamide 12 by low pressure cold spray

Surface and Coatings Technology
2024-03 | Journal article
DOI: 10.1016/j.surfcoat.2024.130484
Contributors: Davide Verdi; David Merino-Millán; Alicia Salazar
Source: check_circle
Crossref

Fracture resistance of polyacrylamide-alginate hydrogels

Engineering Fracture Mechanics
2023-12-19 | Journal article
DOI: 10.1016/j.engfracmech.2023.109812
Part of ISSN: 0013-7944
Contributors: C. Reinhards-Hervás; A.J. Cano; A. Rico; A. Salazar; J. Rodríguez
Source: Self-asserted source
Alicia Salazar

Mechanical and fatigue behaviour of polyamide 12 processed via injection moulding and selective laser sintering. Analysis based on Kitagawa-Takahashi diagrams

Engineering Fracture Mechanics
2022-11 | Journal article
DOI: 10.1016/j.engfracmech.2022.108825
Part of ISSN: 0013-7944
Contributors: A. Salazar; A.J. Cano; J. Rodríguez
Source: Self-asserted source
Alicia Salazar

Fracture of notched samples of chocolate

Theoretical and Applied Fracture Mechanics
2022-10 | Journal article
DOI: 10.1016/j.tafmec.2022.103477
Part of ISSN: 0167-8442
Contributors: F.J. Gómez; A. Salazar; M. Martínez; S.K. Rana; J. Rodríguez
Source: Self-asserted source
Alicia Salazar

On the failure assessment diagram methodology in polyamide 12

Engineering Fracture Mechanics
2022-06 | Journal article
DOI: 10.1016/j.engfracmech.2022.108558
Part of ISSN: 0013-7944
Source: Self-asserted source
Alicia Salazar

Evaluation of the structural integrity of solid rocket propellant by means of the viscoelastic fracture mechanics approach at low and medium strain rates

Theoretical and Applied Fracture Mechanics
2022-01 | Journal article
DOI: 10.1016/j.tafmec.2021.103237
Part of ISSN: 0167-8442
Source: Self-asserted source
Alicia Salazar

Fatigue life assessment of polyamide 12 processed by selective laser sintering. Damage modelling according to fracture mechanics

Rapid Prototyping Journal
2021-12-30 | Journal article
DOI: 10.1108/rpj-06-2021-0142
Part of ISSN: 1355-2546
Part of ISSN: 1355-2546
Source: Self-asserted source
Alicia Salazar

Fatigue crack propagation behaviour of carboxyl-terminated polybutadiene solid rocket propellants

International Journal of Fracture
2020-05 | Journal article
DOI: 10.1007/s10704-020-00435-5
Contributors: R. López; A. Salazar; J. Rodríguez
Source: check_circle
Crossref

Determination of the Fracture Resistance of Ductile Polymers: The ESIS TC4 Recent Experience

Materials Performance and Characterization
2020-05-01 | Journal article
DOI: 10.1520/mpc20190175
Part of ISSN: 2379-1365
Source: Self-asserted source
Alicia Salazar

Effect of the orientation on the fatigue crack growth of polyamide 12 manufactured by selective laser sintering

Rapid Prototyping Journal
2019 | Journal article
DOI: 10.1108/RPJ-09-2018-0255
EID:

2-s2.0-85070318788
Contributors: Cano, A.J.; Salazar, A.; Rodríguez, J.
Source: Self-asserted source
Alicia Salazar via Scopus - Elsevier

Understanding the failure of epoxy resin U-notched samples using cohesive models

Theoretical and Applied Fracture Mechanics
2019 | Journal article
DOI: 10.1016/j.tafmec.2019.04.002
EID:

2-s2.0-85064078289
Contributors: Serrano, A.; Garrido, M.A.; Salazar, A.; Rodríguez, J.
Source: Self-asserted source
Alicia Salazar via Scopus - Elsevier

Effect of temperature on the fracture behavior of polyamide 12 and glass-filled polyamide 12 processed by selective laser sintering

Engineering Fracture Mechanics
2018 | Journal article
DOI: 10.1016/j.engfracmech.2018.07.035
EID:

2-s2.0-85050410519
Contributors: Cano, A.J.; Salazar, A.; Rodríguez, J.
Source: Self-asserted source
Alicia Salazar via Scopus - Elsevier

Structural integrity of aged hydroxyl-terminated polybutadiene solid rocket propellant

Journal of Propulsion and Power
2018 | Journal article
DOI: 10.2514/1.B36496
EID:

2-s2.0-85038216460
Contributors: López, R.; Ortega De La Rosa, A.; Salazar, A.; Rodríguez, J.
Source: Self-asserted source
Alicia Salazar via Scopus - Elsevier

Optimization of atmospheric low-power plasma spraying process parameters of Al2O3-50wt%Cr2O3 coatings

Surface and Coatings Technology
2018-11 | Journal article
DOI: 10.1016/j.surfcoat.2018.09.032
Contributors: A. Rico; A. Salazar; M.E. Escobar; J. Rodriguez; P. Poza
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Evaluation of different crack driving forces for describing the fatigue crack growth behaviour of PET-G

International Journal of Fatigue
2018-02 | Journal article
DOI: 10.1016/j.ijfatigue.2017.10.013
Contributors: A.J. Cano; A. Salazar; J. Rodríguez
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Fracture behaviour of epoxy nanocomposites modified with triblock copolymers and carbon nanotubes

Composites Part B-Engineering
2016 | Journal article
DOI: 10.1016/j.compositesb.2015.08.085
WOSUID:

WOS:000375816300030
Contributors: Gomez-del Rio, T.; Salazar, A.; Pearson, R. A.; Rodriguez, J.
Source: Self-asserted source
Alicia Salazar via ResearcherID
grade
Preferred source (of 2)‎

Influence of the notch-sharpening technique on styrene-acrylonitrile fracture behavior

Journal of Applied Polymer Science
2016 | Journal article
DOI: 10.1002/app.43775
WOSUID:

WOS:000378429900019
Contributors: Martinez, A. B.; Salazar, A.; Leon, N.; Illescas, S.; Rodriguez, J.
Source: Self-asserted source
Alicia Salazar via ResearcherID
grade
Preferred source (of 2)‎

Application of the load separation criterion in J-testing of ductile polymers: A round-robin testing exercise

Polymer Testing
2015 | Journal article
DOI: 10.1016/j.polymertesting.2015.03.019
WOSUID:

WOS:000357234800011
Contributors: Agnelli, S.; Baldi, F.; Blackman, B. R. K.; Castellani, L.; Frontini, P. M.; Laiarinandrasana, L.; Pegoretti, A.; Rink, M.; Salazar, A.; Visser, H. A.
Source: Self-asserted source
Alicia Salazar via ResearcherID
grade
Preferred source (of 2)‎

Fracture of notched samples in epoxy resin: Experiments and cohesive model

Engineering Fracture Mechanics
2015 | Journal article
DOI: 10.1016/j.engfracmech.2015.06.058
WOSUID:

WOS:000366307500031
Contributors: Rodriguez, J.; Salazar, A.; Gomez, F. J.; Patel, Y.; Williams, J. G.
Source: Self-asserted source
Alicia Salazar via ResearcherID
grade
Preferred source (of 2)‎

Fracture toughness of high density polyethylene: Fatigue pre-cracking versus femtolaser, razor sharpening and broaching

Engineering Fracture Mechanics
2015 | Journal article
DOI: 10.1016/j.engfracmech.2015.07.016
WOSUID:

WOS:000366307500016
Contributors: Salazar, A.; Rodriguez, J.; Arbeiter, F.; Pinter, G.; Martinez, A. B.
Source: Self-asserted source
Alicia Salazar via ResearcherID
grade
Preferred source (of 2)‎

Determination of fracture toughness of propylene polymers at different operating temperatures

Engineering Fracture Mechanics
2014 | Journal article
DOI: 10.1016/j.engfracmech.2014.04.023
WOSUID:

WOS:000340013700007
Contributors: Salazar, A.; Frontini, P. M.; Rodriguez, J.
Source: Self-asserted source
Alicia Salazar via ResearcherID
grade
Preferred source (of 2)‎

Fatigue crack growth of SLS polyamide 12: Effect of reinforcement and temperature

Composites Part B: Engineering
2014 | Journal article
DOI: 10.1016/j.compositesb.2013.12.017
EID:

2-s2.0-84891870012
Contributors: Salazar, A.; Rico, A.; Rodríguez, J.; Segurado Escudero, J.; Seltzer, R.; Martin De La Escalera Cutillas, F.
Source: Self-asserted source
Alicia Salazar via Scopus - Elsevier

Fatigue crack growth of SLS polyamide 12: Effect of reinforcement and temperature

Composites Part B-Engineering
2014 | Journal article
DOI: 10.1016/j.compositesb2013.12.017
WOSUID:

WOS:000331019700031
Contributors: Salazar, A.; Rico, A.; Rodriguez, J.; Segurado Escudero, J.; Seltzer, R.; de la Escalera Cutillas, F. Martin
Source: Self-asserted source
Alicia Salazar via ResearcherID

Influence of the notch sharpening on the impact fracture toughness of ethylene-propylene block copolymers

Polymer Testing
2014 | Journal article
DOI: 10.1016/j.polymertesting.2014.03.018
WOSUID:

WOS:000337553600011
Contributors: Martinez, A. B.; Arencon, D.; Rodriguez, J.; Salazar, A.
Source: Self-asserted source
Alicia Salazar via ResearcherID
grade
Preferred source (of 2)‎

Monotonic loading and fatigue response of a bio-based polyamide PA11 and a petrol-based polyamide PA12 manufactured by selective laser sintering

European Polymer Journal
2014 | Journal article
DOI: 10.1016/j.eurpolymj.2014.07.016
WOSUID:

WOS:000343341100005
Contributors: Salazar, A.; Rico, A.; Rodriguez, J.; Segurado Escudero, J.; Seltzer, R.; Martin de la Escalera Cutillas, F.
Source: Self-asserted source
Alicia Salazar via ResearcherID
grade
Preferred source (of 2)‎

Strain rate and loading modes in DMTA experiments on ethylene/propylene block copolymers

Mechanics of Time-Dependent Materials
2014 | Journal article
DOI: 10.1007/s11043-014-9234-8
WOSUID:

WOS:000335556900005
Contributors: Rico, A.; Outon, P. R.; Salazar, A.; Benavente, R.; Rodriguez, J.
Source: Self-asserted source
Alicia Salazar via ResearcherID
grade
Preferred source (of 2)‎

Influence of crack sharpness on the fracture toughness of epoxy resins

13th International Conference on Fracture 2013, ICF 2013
2013 | Conference paper
EID:

2-s2.0-84898788980
Contributors: Salazar, A.; Patel, Y.; Williams, J.G.
Source: Self-asserted source
Alicia Salazar via Scopus - Elsevier

On the effect of the different notching techniques on the fracture toughness of PETG

Polymer Testing
2013 | Journal article
DOI: 10.1016/j.polymertesting.2013.07.016
WOSUID:

WOS:000325509300012
Contributors: Martinez, A. B.; Leon, N.; Arencon, D.; Rodriguez, J.; Salazar, A.
Source: Self-asserted source
Alicia Salazar via ResearcherID
grade
Preferred source (of 2)‎

The role of notch sharpening on the J-fracture toughness of thermoplastic polymers

Engineering Fracture Mechanics
2013 | Journal article
DOI: 10.1016/j.engfracmech.2012.07.006
WOSUID:

WOS:000330851400003
Contributors: Salazar, A.; Rodriguez, J.; Martinez, A. B.
Source: Self-asserted source
Alicia Salazar via ResearcherID
grade
Preferred source (of 2)‎

Effect of strain rate and temperature on tensile properties of ethylene-propylene block copolymers

Materials & Design
2012 | Journal article
DOI: 10.1016/j.matdes.2012.05.042
WOSUID:

WOS:000308077400038
Contributors: Gomez-del Rio, T.; Salazar, A.; Rodriguez, J.
Source: Self-asserted source
Alicia Salazar via ResearcherID
grade
Preferred source (of 2)‎

Influence of the injection moulding parameters on the cellular structure and thermo- mechanical properties of ethylene-propylene block copolymer and PETG foams

Society of Plastics Engineers - 10th International Conference on Foam Materials and Technology, FOAMS 2012
2012 | Conference paper
EID:

2-s2.0-84962069929
Contributors: Areneon, D.; Sdnchez-Soto, M.; Martinez, A.B.; Gómez, J.F.; Rodriguez, J.; Salazar, A.
Source: Self-asserted source
Alicia Salazar via Scopus - Elsevier

Relating Fracture Behavior to Spherulite Size in Conrolled-Rheology Polypropylenes

Polymer Engineering and Science
2012 | Journal article
DOI: 10.1002/pen.22145
WOSUID:

WOS:000301539300012
Contributors: Salazar, A.; Rico, A.; Rodriguez, S.; Navarro, J. M.; Rodriguez, J.
Source: Self-asserted source
Alicia Salazar via ResearcherID
grade
Preferred source (of 2)‎

Fracture behaviour of controlled-rheology ethylene-propylene block copolymers

Polymer International
2011 | Journal article
DOI: 10.1002/pi.3012
WOSUID:

WOS:000289516300008
Contributors: Salazar, Alicia; Martin, Tamara; Navarro, Jose M.; Rodriguez, Jesus
Source: Self-asserted source
Alicia Salazar via ResearcherID
grade
Preferred source (of 2)‎

Mechanical Analysis of Carbon Nanofiber/Epoxy Resin Composites

Polymer Composites
2011 | Journal article
DOI: 10.1002/pc.21187
WOSUID:

WOS:000295453700019
Contributors: Chaos-Moran, R.; Salazar, A.; Urena, A.
Source: Self-asserted source
Alicia Salazar via ResearcherID
grade
Preferred source (of 2)‎

Influence of the notch sharpening technique on the fracture toughness of bulk ethylene-propylene block copolymers

Polymer Testing
2010 | Journal article
DOI: 10.1016/j.polymertesting.2009.09.004
WOSUID:

WOS:000274562800009
Contributors: Salazar, A.; Rodriguez, J.; Segovia, A.; Martinez, A. B.
Source: Self-asserted source
Alicia Salazar via ResearcherID
grade
Preferred source (of 2)‎

Relevance of the femtolaser notch sharpening to the fracture of ethylene-propylene block copolymers

European Polymer Journal
2010 | Journal article
DOI: 10.1016/j.eurpolymj.2010.06.012
WOSUID:

WOS:000282357000010
Contributors: Salazar, A.; Rodriguez, J.; Segovia, A.; Martinez, A. B.
Source: Self-asserted source
Alicia Salazar via ResearcherID
grade
Preferred source (of 2)‎

The effect of hygrothermal conditions on the fracture toughness of epoxy/poly (styrene-co-allylalcohol) blends

Materials Letters
2010 | Journal article
DOI: 10.1016/j.matlet.2009.10.034
WOSUID:

WOS:000272875700019
Contributors: Salazar, A.; Prolongo, S. G.; Rodriguez, J.
Source: Self-asserted source
Alicia Salazar via ResearcherID
grade
Preferred source (of 2)‎

The role of notching damage on the fracture parameters of ethylene-propylene block copolymers

Polymer Testing
2010 | Journal article
DOI: 10.1016/j.polymertesting.2010.07.003
WOSUID:

WOS:000282456400008
Contributors: Salazar, A.; Segovia, A.; Martinez, A. B.; Rodriguez, J.
Source: Self-asserted source
Alicia Salazar via ResearcherID
grade
Preferred source (of 2)‎

On the determination of elastic modulus in very stiff materials by depth sensing indentation

Journal of Materials Science
2009 | Journal article
DOI: 10.1007/s10853-009-3813-0
WOSUID:

WOS:000269956600013
Contributors: Rico, A.; Garrido Maneiro, M. A.; Gomez Del Rio, M. T.; Salazar, A.; Rodriguez, J.
Source: Self-asserted source
Alicia Salazar via ResearcherID
grade
Preferred source (of 2)‎

On the determination of fracture toughness of PP polymers

12th International Conference on Fracture 2009, ICF-12
2009 | Conference paper
EID:

2-s2.0-84869747442
Contributors: Frontini, P.M.; Fasce, L.A.; Salazar, A.; Rodríguez, J.
Source: Self-asserted source
Alicia Salazar via Scopus - Elsevier

Hardness and Young's Modulus Determination of Nanostructured Alumina-titania Coatings

Advanced Materials Forum Iv
2008 | Book chapter
WOSUID:

WOS:000259898200095
Contributors: Rico, A.; Garrido, M. A.; Salazar, A.; Otero, E.; Rodriguez, J.; Marques, AT; Silva, AF; Baptista, APM; Sa, C; Alves, FJLA et al.
Source: Self-asserted source
Alicia Salazar via ResearcherID

The use of the load separation parameter S(pb) method to determine the J-R curves of polypropylenes

Polymer Testing
2008 | Journal article
DOI: 10.1016/j.polymertesting.2008.08.013
WOSUID:

WOS:000261370900012
Contributors: Salazar, A.; Rodriguez, J.
Source: Self-asserted source
Alicia Salazar via ResearcherID
grade
Preferred source (of 2)‎

Effect of hydroxyl content on the morphology and properties of epoxy/poly(styrene-co-allylalcohol) blends

Polymer Engineering and Science
2007 | Journal article
DOI: 10.1002/pen.20686
WOSUID:

WOS:000249905800011
Contributors: Prolongo, Silvia G.; Salazar, Alicia; Urena, Alejandro; Rodriguez, Jesus
Source: Self-asserted source
Alicia Salazar via ResearcherID
grade
Preferred source (of 2)‎

Electrochemical impedance spectroscopy analysis of thermal barrier coatings after isothermal oxidation

Boletin De La Sociedad Espanola De Ceramica Y Vidrio
2007 | Journal article
WOSUID:

WOS:000250960700003
Contributors: Gomez-Gacia, J.; Salazar, A.; Munez, C. J.; Poza, V. Utrilla Y. P.
Source: Self-asserted source
Alicia Salazar via ResearcherID

Fracture properties of epoxy/poly(styrene-co-allylalcohol) blends

Journal of Applied Polymer Science
2007 | Journal article
DOI: 10.1002/app.26811
WOSUID:

WOS:000250410500048
Contributors: Salazar, A.; Prolongo, S. G.; Rodriguez, J.
Source: Self-asserted source
Alicia Salazar via ResearcherID
grade
Preferred source (of 2)‎

Fracture toughness of controlled-rheology polypropylenes

E-Polymers
2007 | Journal article
EID:

2-s2.0-33847274269
Contributors: Salazar, A.; Rodríguez, S.; Navarro, J.M.; Ureña, A.; Rodríguez, J.
Source: Self-asserted source
Alicia Salazar via Scopus - Elsevier
Items per page:
Page 1 of 2

Peer review (17 reviews for 6 publications/grants)

Review activity for Composite structures (2)
Review activity for Composites. (1)
Review activity for Engineering fracture mechanics. (6)
Review activity for International journal of mechanical sciences. (1)
Review activity for Mechanics of materials. (1)
Review activity for Theoretical and applied fracture mechanics. (6)
How many people are using ORCID?