Personal information

geotechnics, physical modelling, soil investigation
Poland

Activities

Employment (1)

Gdańsk University of Technology: Gdańsk, PL

1988-11-02 to present | Head (Geotechnics, Geology and Marine Civil Engineering)
Employment
Source: Self-asserted source
Lech Bałachowski

Works (50 of 64)

Items per page:
Page 1 of 2

Prediction of Pile Shaft Capacity in Tension Based on Some Direct CPT Methods—Vistula Marshland Test Site

Materials
2022-03 | Journal article | Author
Contributors: Łukasz Zwara; Lech Bałachowski
Source: check_circle
Multidisciplinary Digital Publishing Institute

Shaft friction from the DMT and direct shear interface tests

IOP Conference Series: Earth and Environmental Science
2021 | Conference paper
EID:

2-s2.0-85105265469

Part of ISSN: 17551315 17551307
Contributors: Mikina, K.; Konkol, J.; Balachowski, L.
Source: Self-asserted source
Lech Bałachowski via Scopus - Elsevier

Statistical evaluation of physical and index properties of Vistula Marshlands deltaic soft soils

IOP Conference Series: Earth and Environmental Science
2021 | Conference paper
EID:

2-s2.0-85105267951

Part of ISSN: 17551315 17551307
Contributors: Konkol, J.; Balachowski, L.
Source: Self-asserted source
Lech Bałachowski via Scopus - Elsevier

Discussion of "axisymmetric Simulations of Cone Penetration in Saturated Clay" by Diane M. Moug, Ross W. Boulanger, Jason T. DeJong, and Robert A. Jaeger

Journal of Geotechnical and Geoenvironmental Engineering
2020 | Journal article
EID:

2-s2.0-85080969991

Part of ISSN: 10900241
Contributors: Konkol, J.; Bałachowski, L.
Source: Self-asserted source
Lech Bałachowski via Scopus - Elsevier

Discussion of "CPT Evaluation of Yield Stress Profiles in Soils" by Shehab S. Agaiby and Paul W. Mayne

Journal of Geotechnical and Geoenvironmental Engineering
2020 | Journal article
EID:

2-s2.0-85092227329

Part of ISSN: 19435606 10900241
Contributors: Bałachowski, L.
Source: Self-asserted source
Lech Bałachowski via Scopus - Elsevier

Discussion: Horizontal stress increase induced by deep vibratory compaction

Proceedings of the Institution of Civil Engineers: Geotechnical Engineering
2020 | Journal article
EID:

2-s2.0-85088464402

Part of ISSN: 17518563 13532618
Contributors: Massarsch, K.R.; Wersäll, C.; Fellenius, B.H.; Bałachowski, L.; Kurek, N.; Konkol, J.
Source: Self-asserted source
Lech Bałachowski via Scopus - Elsevier

Discussion on “Coupled effective stress analysis of insertion problems in geotechnics with the Particle Finite Element Method” by L. Monforte, M. Arroyo, J.M. Carbonell, and A. Gens

Computers and Geotechnics
2019 | Journal article
EID:

2-s2.0-85059478793

Contributors: Konkol, J.; Bałachowski, L.
Source: Self-asserted source
Lech Bałachowski via Scopus - Elsevier

Effective friction angle of deltaic soils in the vistula marshlands

Studia Geotechnica et Mechanica
2019 | Journal article
EID:

2-s2.0-85073767262

Part of ISSN: 2083831X 01376365
Contributors: Miȩdlarz, K.; Konkol, J.; Bałachowski, L.
Source: Self-asserted source
Lech Bałachowski via Scopus - Elsevier

Geotechnical characterization of soft soil deposits in Northern Poland

Engineering Geology
2019 | Journal article
EID:

2-s2.0-85067187145

Contributors: Konkol, J.; Międlarz, K.; Bałachowski, L.
Source: Self-asserted source
Lech Bałachowski via Scopus - Elsevier

Determination of p-y curves for offshore piles based on in-situ soil investigations

MATEC Web of Conferences
2018 | Conference paper
EID:

2-s2.0-85056630983

Contributors: Miedlarz, K.; Bałachowski, L.
Source: Self-asserted source
Lech Bałachowski via Scopus - Elsevier

Large deformation modelling of CPT probing in soft soil—pore water pressure analysis

Cone Penetration Testing 2018 - Proceedings of the 4th International Symposium on Cone Penetration Testing, CPT 2018
2018 | Conference paper
EID:

2-s2.0-85059481584

Contributors: Konkol, J.; Bałachowski, L.
Source: Self-asserted source
Lech Bałachowski via Scopus - Elsevier

Strength parameters of deltaic soils determined with CPTU, DMT and FVT

Cone Penetration Testing 2018 - Proceedings of the 4th International Symposium on Cone Penetration Testing, CPT 2018
2018 | Conference paper
EID:

2-s2.0-85061329724

Contributors: Bałachowski, L.; Międlarz, K.; Konkol, J.
Source: Self-asserted source
Lech Bałachowski via Scopus - Elsevier

Influence of Installation Effects on Pile Bearing Capacity in Cohesive Soils - Large Deformation Analysis Via Finite Element Method

Studia Geotechnica et Mechanica
2017 | Journal article
EID:

2-s2.0-85020451192

Contributors: Konkol, J.; Bałachowski, L.
Source: Self-asserted source
Lech Bałachowski via Scopus - Elsevier

Influence of installation effects on pile bearing capacity in cohesive soils–large deformation analysis via Finite Element Method

Studia Geotechnica et Mechanica
2017 | Journal article
Source: Self-asserted source
Lech Bałachowski

Numerical modeling of cone penetration test in slightly overconsolidated clay with arbitrary Lagrangian-Eulerian formulation

Procedia Engineering
2017 | Journal article
EID:

2-s2.0-85014622713

Source: Self-asserted source
Lech Bałachowski
grade
Preferred source (of 2)‎

Physical Modelling of Geotechnical Structures in Ports and Offshore

Polish Maritime Research 24 (s1)
2017 | Journal article
EID:

2-s2.0-85020724870

Source: Self-asserted source
Lech Bałachowski
grade
Preferred source (of 2)‎

Large deformation finite element analysis of undrained pile installation

Studia Geotechnica et Mechanica
2016 | Journal article
EID:

2-s2.0-85014706220

Source: Self-asserted source
Lech Bałachowski
grade
Preferred source (of 2)‎

Parametry mechaniczne platformy roboczej na podstawie badań DMT

Acta Scientiarum Polonorum. Architectura
2016 | Journal article
Source: Self-asserted source
Lech Bałachowski

Bearing capacity of the working platform with kinematic method

Studia Geotechnica et Mechanica
2015 | Journal article
Source: Self-asserted source
Lech Bałachowski

Bearing Capacity of Working Platforms using Distinct Layout Opitimization Method

Geotechnical Safety and Risk V
2015 | Journal article
Source: Self-asserted source
Lech Bałachowski

Interpretacja sondowania statycznego w pełnym zakresie głębokości

Inżynieria Morska i Geotechnika, 727-
2015 | Journal article
Source: Self-asserted source
Lech Bałachowski

Kryteria kontroli jakości zagęszczania wgłębnego gruntów niespoistych

Inżynieria Morska i Geotechnika, 423-
2015 | Journal article
Source: Self-asserted source
Lech Bałachowski

Vibroflotation control of sandy soils using DMT and CPTU

The 3rd International Conference on the Flat Dilatometer. Rome
2015 | Journal article
Source: Self-asserted source
Lech Bałachowski

Badania modelowe w komorze kalibracyjnej

Inżynieria Morska i Geotechnika
2014 | Journal article
Source: Self-asserted source
Lech Bałachowski

Deep compaction control of sandy soils

Studia Geotechnica et Mechanica
2014 | Journal article
Source: Self-asserted source
Lech Bałachowski

Stability of the Inner Slope of the Polish DredgDikes Research Dike at Stationary Flow

Proceedings of the South Baltic Conference on Dredged Materials in Dike …
2014 | Journal article
Source: Self-asserted source
Lech Bałachowski

Mechanical properties of bottom ash–dredged material mixtures in laboratory tests

Studia Geotechnica et Mechanica
2013 | Journal article
Source: Self-asserted source
Lech Bałachowski

Pale rurowe otwarte–formowanie się korka gruntowego

Inżynieria Morska i Geotechnika
2012 | Journal article
Source: Self-asserted source
Lech Bałachowski

Influence of boundary conditions in calibration chamber

Archives of Civil Engineering
2008 | Journal article
EID:

2-s2.0-79955014689

Source: Self-asserted source
Lech Bałachowski
grade
Preferred source (of 2)‎

Intercorrelation between CPTU-DMT test for sands on the Baltic coast

Proc. of 11th Baltic Sea Geotech. Conf., Gdańsk
2008 | Journal article
Source: Self-asserted source
Lech Bałachowski

Physical modeling in sands in a wide range of stress level: Application to the calibration of CPTU and DMT tests

Wydawnictwo Politechniki Gdańskiej
2008 | Journal article
Source: Self-asserted source
Lech Bałachowski

USE OF CPTU AND DMT IN REHABILITATION OF FLOOD EMBANKMENTS.

Studia Geotechnica et Mechanica
2008 | Journal article
Source: Self-asserted source
Lech Bałachowski

Characteristics of tyre chips-sand mixtures from triaxial tests

Archives of Hydro-Engineering and Environmental Mechanics
2007 | Journal article
Source: Self-asserted source
Lech Bałachowski

Charactersties of tyre chips-sand mixtures from triaxial tests

Archives of Hydroengineering and Environmental Mechanics
2007 | Journal article
EID:

2-s2.0-61349171354

Contributors: BałAchowski, L.; Gotteland, P.
Source: Self-asserted source
Lech Bałachowski via Scopus - Elsevier

Interpretacja badań CPT w komorze kalibracyjnej

Prace Naukowe Instytutu Geotechniki i Hydrotechniki Politechniki …
2007 | Journal article
Source: Self-asserted source
Lech Bałachowski

Kontrola zagęszczenia wgłębnego piasku na podstawie badania dylatometrycznego DMT

2007 | Other
Source: Self-asserted source
Lech Bałachowski

Size effect in centrifuge cone penetration tests

Archives of Hydro-Engineering and Environmental Mechanics
2007 | Journal article
EID:

2-s2.0-61349200263

Source: Self-asserted source
Lech Bałachowski
grade
Preferred source (of 2)‎

Use of CPTU and DMT tests in rehabilitation of flood embankment

18ème Congrès Français de Mécanique (Grenoble 2007)
2007 | Journal article
Source: Self-asserted source
Lech Bałachowski

Use of CPTU and DMT tests in rehabilitation of flood embankment

18ème Congrès Français de Mécanique (Grenoble 2007)
2007 | Journal article
Source: Self-asserted source
Lech Bałachowski

Analysis of dilatometer test in calibration chamber

Proc. 2nd Int. Conference on the Fiat Dilatometer. Washington
2006 | Journal article
Source: Self-asserted source
Lech Bałachowski

Compaction control at Gdynia Port with CPTU and DMT

Proc. of International Symposium of vibratory pile driving and deep soil …
2006 | Journal article
Source: Self-asserted source
Lech Bałachowski

Interpretacja badania dysypacji w gruntach normalnie skonsolidowanych w metodzie CPTU

Inżynieria Morska i Geotechnika
2006 | Journal article
Source: Self-asserted source
Lech Bałachowski

Numerical modelling of DMT test in calibration chamber

Studia Geotechnica et Mechanica 28 (2-4)
2006 | Journal article
Source: Self-asserted source
Lech Bałachowski

Penetration resistance of Lubiatowo sand in calibration chamber tests

Archives of Hydro-Engineering and Environmental Mechanics
2006 | Journal article
Source: Self-asserted source
Lech Bałachowski

Scale effect in shaft friction from the direct shear interface tests

Archives of Civil and mechanical engineering
2006 | Journal article
Source: Self-asserted source
Lech Bałachowski

Scale effect in shaft friction from the direct shear interface tests,Efekt skali dla tarcia na podstawie badań bezpośredniego ścinania w kontakcie

Archives of Civil and Mechanical Engineering
2006 | Journal article
EID:

2-s2.0-61349202821

Part of ISSN: 16449665
Contributors: Bałachowski, L.
Source: Self-asserted source
Lech Bałachowski via Scopus - Elsevier

Seashore sand parameters with DMT and CPTU tests

Proc. 2 nd International Conference on the Flat Dilatometer
2006 | Journal article
Source: Self-asserted source
Lech Bałachowski

Soft soil overconsolidation and CPTU dissipation test

Archives of Hydroengineering and Environmental Mechanics
2006 | Journal article
EID:

2-s2.0-61349140057

Source: Self-asserted source
Lech Bałachowski
grade
Preferred source (of 2)‎

Use of calibration chamber as a large triaxial apparatus

Archives of Civil and Mechanical Engineering
2006 | Journal article
Source: Self-asserted source
Lech Bałachowski

Use of calibration chamber as a large triaxial apparatus,Komora kalibracyjna jako wielkowymiarowy aparat trójosiowego ńciskania

Archives of Civil and Mechanical Engineering
2006 | Journal article
EID:

2-s2.0-85083433871

Part of ISSN: 16449665
Contributors: Bałachowski, L.
Source: Self-asserted source
Lech Bałachowski via Scopus - Elsevier
Items per page:
Page 1 of 2