Personal information

Verified email domains

Cold Metal Transfer, Welding, Wear, Corrosion, Material Characterization, Additive Manufacturing, Hardfacing, Wire Arc Additive Manufacturing
India, South Korea

Biography

I am a Post-doctoral Research Associate in the Department of Mechanical Engineering at Incheon National University, Incheon, South Korea. My interests include additive manufacturing, material characterization, metal forming, and CMT welding.

Activities

Employment (3)

Incheon National University: Incheon, KR

2024-11-01 to present | Post-doctoral Research Associate (Mechanical Engineering)
Employment
Source: Self-asserted source
A. Rajesh Kannan

Hanyang University - ERICA Campus: Ansan, Gyeonggi-do, KR

2022-08-01 to 2024-07-31 | Post-doctoral Researcher (Mechanical Engineering)
Employment
Source: Self-asserted source
A. Rajesh Kannan

Hayagriva Polytechnic College, Puducherry: Puducherry, Puducherry, IN

2011-07-05 to 2013-05-13 | Lecturer (Mechanical Engineering)
Employment
Source: Self-asserted source
A. Rajesh Kannan

Education and qualifications (3)

National Institute of Technology Tiruchirappalli: Tiruchirappalli, Tamil Nadu, IN

2017-01-20 to 2022-07-21 | PhD (Mechanical Engineering)
Education
Source: Self-asserted source
A. Rajesh Kannan

Adithya Institute of Technology: Coimbatore, Tamil Nadu, IN

2013-08 to 2016-07 | M.E. Engineering Design (Mechanical Engineering)
Education
Source: Self-asserted source
A. Rajesh Kannan

Mailam Engineering College, Mailam, Villupuram: Villupuram, Tamil Nadu, IN

2007-08-29 to 2011-05-06 | B.E. (Mechanical Engineering)
Education
Source: Self-asserted source
A. Rajesh Kannan

Professional activities (3)

Society for Failure Analysis: Hyderabad, Telangana, IN

2018-10-18 to present | Founder Life Member (Mechanical Engineering)
Membership
Source: Self-asserted source
A. Rajesh Kannan

International Association of Engineers: Hong Kong, Hong Kong, CN

2015-05-05 to present | Life Member (Mechanical Engineering)
Membership
Source: Self-asserted source
A. Rajesh Kannan

Indian Society of Mechanical Engineers: Chennai, Tamil Nadu, IN

2014-07-10 to present | Senior Member (Mechanical Engineering)
Membership
Source: Self-asserted source
A. Rajesh Kannan

Works (50 of 63)

Items per page:
Page 1 of 2

Influence of heat treatment on the microstructure and thermal conductivity of duplex stainless steel manufactured via wire arc additive manufacturing

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
2025 | Journal article
Contributors: Sanjeeviprakash, Karunanithi; Sankarapandian, Sankarasabapathi; Kannan, Arasappan Rajesh; Shanmugam, Nallathambi Siva
Source: check_circle
Web of Science Researcher Profile Sync

Microstructure and Hot Oxidation Resistance of Wrought and Wire Arc Additive Manufactured Austenitic Stainless Steel 347

Source: check_circle
Web of Science Researcher Profile Sync

Microstructure and nanomechanical behaviour of wire-arc additive manufactured nickel-based superalloy C276

Progress in Additive Manufacturing
2024 | Journal article
Contributors: Kannan, A. Rajesh; Palguna, Yasam; Rajkumar, V.; Shanmugam, N. Siva; Lee, Wonjoo; Mohan, Dhanesh G.; Yoon, Jonghun; Oliveira, J. P.
Source: check_circle
Web of Science Researcher Profile Sync

Microstructure, hardness, and electrical resistivity of Al-Cu alloy fabricated via wire arc additive manufacturing

Materials Today Communications
2024 | Journal article
Contributors: Kannan, A. Rajesh; Rajkumar, V.; Vasudevan, Srinivasan Vinju; Jerome, Peter; Oh, Tae Hwan
Source: check_circle
Web of Science Researcher Profile Sync

Progress in the Optimization of Compositional Design and Thermomechanical Processing of Metastable β Ti Alloys for Biomedical Applications

ACS Biomaterials Science & Engineering
2024 | Journal article
Contributors: Raja, C. Pradeep; Babu, N. B. Karthik; Kannan, A. Rajesh; Shanmugam, Vigneshwaran; Balaji, N. S.; Sahani, Rishikant; Behera, Laxmidhar; Pugazhenthi, A.; Thansekhar, M. R.
Source: check_circle
Web of Science Researcher Profile Sync

Single-point incremental formability of Monel 400: Coupled grey relational and principal component analyses

Source: check_circle
Web of Science Researcher Profile Sync

Understanding the microstructural evolution and fatigue behavior of aluminum 2319 fabricated by wire arc additive manufacturing

Archives of Civil and Mechanical Engineering
2024 | Journal article
Contributors: Kannan, A. Rajesh; Pramod, R.; Prakash, K. Sanjeevi; Shanmugam, N. Siva; Yoon, Jonghun; Oliveira, J. P.
Source: check_circle
Web of Science Researcher Profile Sync

Microstructure, Mechanical Properties and Corrosion Performance of Laser-Welded NiTi Shape Memory Alloy in Simulated Body Fluid

Materials
2024-09 | Journal article | Author
Contributors: A. Rajesh Kannan; Nallathambi Siva Shanmugam; V. Rajkumar; Vishnukumar M; Channabasavanna S G; Junho Oh; THAN TRONG KHANH DAT; Jounghun Yoon
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎

High temperature corrosion performance of Inconel 625 hard overlays deposited on stainless steel substrate

Materials and Corrosion
2024-07 | Journal article
Contributors: Pravin Kumar Nachimuthu; Sreedhar Gosipathala; Rajesh Kannan Arasappan; Siva Shanmugam Nallathambi
Source: check_circle
Crossref

Microstructure, mechanical properties, and corrosion behaviour of wire arc additive manufactured martensitic stainless steel 410 for pressure vessel applications

International Journal of Pressure Vessels and Piping
2024-06 | Journal article
Contributors: Rajkumar V; N. Siva Shanmugam; N. Pravin Kumar; K. Krishna Kumar; A. Rajesh Kannan
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Prediction of formability and effects of process parameters on the adhesively bonded composite metallic sheets

Journal of Adhesion Science and Technology
2024-05-02 | Journal article
Contributors: Pradeep Raja C.; T. Ramesh; Karthik Babu N. B.; Balaji N. S.; A. Rajesh Kannan; Dhanesh G. Mohan
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Effect of post weld heat treatment on the microstructure and mechanical properties of gas tungsten arc welded Al0.3CoCrFeNi high entropy alloy

Scripta Materialia
2024-03 | Journal article
Contributors: Yasam Palguna; Kotla Sairam; A. Rajesh Kannan; N. Siva Shanmugam; Rajesh Korla; J.P. Oliveira
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Microstructure and electrochemical evaluation of ER-308L weld overlays on AISI 321 stainless steel for repair applications

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
2024-02 | Journal article
Contributors: N Pravin Kumar; G Sreedhar; S Mohan Kumar; B Girinath; A Rajesh Kannan; R Pramod; N Siva Shanmugam; M Vishnukumar
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Additive manufacturing of metal-based functionally graded materials: overview, recent advancements and challenges

Journal of the Brazilian Society of Mechanical Sciences and Engineering
2023 | Journal article
Contributors: Sanjeeviprakash, K.; Kannan, A. Rajesh; Shanmugam, N. Siva
Source: check_circle
Web of Science Researcher Profile Sync

Effect of double-side welding on the microstructural characteristics and mechanical performance of dissimilar AA6061-AA5052 aluminium alloys

Materials Letters
2023 | Journal article
Contributors: Kannan, A. Rajesh; Shanmugam, N. Siva; Palguna, Yasam; Girinath, B.; Lee, Wonjoo; Yoon, Jonghun
Source: check_circle
Web of Science Researcher Profile Sync

Effect of robotic weaving motion on mechanical and microstructural characteristics of wire arc additively manufactured NiTi shape memory alloy

International Journal of Materials Research (formerly Zeitschrift Fuer Metallkunde)
2023 | Journal article
Contributors: Gonela, Karuna Kumar; Vijayavarman, Chakkravarthy; Palanivel, Manojkumar; Mariappan, Lakshmanan; Ramasubramanian, Lakshmi Narayan; Kannan, Arasappan Rajesh
Source: check_circle
Web of Science Researcher Profile Sync

Hot oxidation and corrosion behaviour of boiler steel fabricated by wire arc additive manufacturing

Materials Characterization
2023 | Journal article
Contributors: Kannan, A.R.; Prasad, C.D.; Rajkumar, V.; Shanmugam, N.S.; Rajkumar, V.; Lee, W.; Yoon, J.
Source: check_circle
Web of Science Researcher Profile Sync

Hot tensile deformation and fracture behavior of wire arc additive manufactured Hastelloy C-276

Welding in the World
2023 | Journal article
Contributors: Kannan, A. Rajesh; Palguna, Yasam; Korla, Rajesh; Kumar, S. Mohan; Pramod, R.; Shanmugam, N. Siva
Source: check_circle
Web of Science Researcher Profile Sync

Investigation on Mechanical and Sliding Wear Behavior of Pongamia-Oil-Cake/Basalt Fiber-Reinforced Epoxy Hybrid Composites

Arabian Journal for Science and Engineering
2023 | Journal article
Contributors: Tavadi, Ashokkumar R.; Nagabhushana, N.; Bhandarkar, V. N. Vivek; Jagadeesha, T.; Kerur, Mohammad Rafi; Rudresha, S.; Prasad, C. Durga; Kannan, A. Rajesh; Mohan, Dhanesh G.
Source: check_circle
Web of Science Researcher Profile Sync

Microstructural features and hot tensile behaviour of tungsten inert gas welded TP321 nuclear tubes at elevated temperatures

Engineering Failure Analysis
2023 | Journal article
Contributors: Alagesan, R.; Kannan, A. Rajesh; Shanmugam, N. Siva; Sankaranarayanasamy, K.
Source: check_circle
Web of Science Researcher Profile Sync

Microstructure and hot corrosion performance of stainless steel 347 produced by wire arc additive manufacturing

Vacuum
2023 | Journal article
Contributors: Kannan, A. Rajesh; Rajkumar, V.; Prasad, C. Durga; Shanmugam, N. Siva; Yoon, Jonghun
Source: check_circle
Web of Science Researcher Profile Sync

Microstructure and Mechanical Properties of Tungsten Inert Gas Welded TP321 Thin-Walled Tubes

Journal of Materials Engineering and Performance
2023 | Journal article
Contributors: Alagesan, R.; Kumar, S. Mohan; Kannan, A. Rajesh; Shanmugam, N. Siva
Source: check_circle
Web of Science Researcher Profile Sync

Microstructure, Mechanical Properties and Fracture Toughness of SS 321 Stainless Steel Manufactured Using Wire Arc Additive Manufacturing

Transactions of the Indian Institute of Metals
2023 | Journal article
Contributors: Prakash, K. Sanjeevi; Kannan, A. Rajesh; Pramod, R.; Kumar, N. Pravin; Shanmugam, N. Siva
Source: check_circle
Web of Science Researcher Profile Sync

Microstructure, Mechanical Properties, and Corrosion Behavior of Co-Based Stellite 6 Multilayer Overlays Deposited on ASTM A36 Steel by Gas Metal Arc Welding Process

Steel Research International
2023 | Journal article
Contributors: Sankarapandian, Sankarasabapathi; Kumar, Nachimuthu Pravin; Kannan, Arasappan Rajesh; Shanmugam, Nallathambi Siva
Source: check_circle
Web of Science Researcher Profile Sync

Weld Strength and Microstructure Analysis on Resistance Spot Welding of Austenitic AISI 347 Stainless Steel and Duplex AISI 2205 Stainless Steel

Transactions of the Indian Institute of Metals
2023 | Journal article
Contributors: Prabhakaran, M.; Duraisamy, Jeyasimman; Shanmugam, N. Siva; Kannan, A. Rajesh; Varatharajalu, M.
Source: check_circle
Web of Science Researcher Profile Sync

Importance of shielding and mechanical characterization of GTAW on Ti-6AL-4V alloy sheet

Welding International
2023-06-03 | Journal article
Contributors: Karpagaraj Anbalagan; Sarala Ramasubramanian; Charles David; S. Manivannan; A. Rajesh Kannan; Dhanesh G. Mohan
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Influence of Microstructural Characteristics on Wear and Corrosion Behaviour of Si3N4-Reinforced Al2219 Composites

Advances in Materials Science and Engineering
2023-02-20 | Journal article
Contributors: C. J. Manjunatha; C. Durga Prasad; Harish Hanumanthappa; A. Rajesh Kannan; Dhanesh G. Mohan; Bharath Kumar Shanmugam; C. Venkategowda; Tushar Sonar
Source: check_circle
Crossref

Metallurgical aspects and electrical resistivity of hardfaced pure copper layers over AISI 347 with cold metal transfer process

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
2023-01 | Journal article
Contributors: A Rajesh Kannan; S Mohan Kumar; R Pramod; N Pravin Kumar; K Sanjeevi Prakash; N Siva Shanmugam; M Vishnukumar
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Wire arc additive manufacturing of functionally graded material with SS 316L and IN625: Microstructural and mechanical perspectives

CIRP Journal of Manufacturing Science and Technology
2022 | Journal article
Contributors: Sasikumar, R.; Kannan, A. Rajesh; Kumar, S. Mohan; Pramod, R.; Kumar, N. Pravin; Shanmugam, N. Siva; Palguna, Yasam; Sivankalai, Sakthivel
Source: check_circle
Web of Science Researcher Profile Sync

A study on evaluation of stress intensity factor (KI) andJ‐integral for 40Ni2Cr1Mo28 alloy (structural steel): analytical and finite element analysis approach

Materialwissenschaft und Werkstofftechnik
2022-12 | Journal article
Contributors: S. Mohan Kumar; A. Rajesh Kannan; R. Pramod; N. Siva Shanmugam; V. Dhinakaran; A. Krishnaveni
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

The Unprecedented Role of 3D Printing Technology in Fighting the COVID-19 Pandemic: A Comprehensive Review

Materials
2022-10-01 | Journal article
Contributors: Y. C. Niranjan; S. G. Channabasavanna; Shankar Krishnapillai; R. Velmurugan; A. Rajesh Kannan; Dhanesh G. Mohan; Sasan Sattarpanah Karganroudi
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Microstructure, mechanical properties and corrosion behaviour of Incoloy 825 manufactured using wire arc additive manufacturing

Vacuum
2022-09 | Journal article
Contributors: V. Rajkumar; M. Vishnukumar; M. Sowrirajan; A. Rajesh Kannan
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

The Unprecedented Role of 3D Printing Technology in Fighting the Covid-19 Pandemic: A Comprehensive Review

2022-08-25 | Preprint
Contributors: Y.C. Niranjan; S.G. Channabasavanna; Shankar Krishnapillai; Velmurugan R; A. Rajesh Kannan; Dhanesh G. Mohan; Sasan Sattarpanah Karganroudi
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Testing, characterization and numerical prediction (uni-axial tension and bend test) of Double-side TIG welded SS321 plate for pressure vessel application

International Journal of Pressure Vessels and Piping
2022-06 | Journal article
Part of ISSN: 0308-0161
Source: Self-asserted source
A. Rajesh Kannan
grade
Preferred source (of 3)‎

Microstructure and high temperature performance of 321 SS wall manufactured through wire + arc additive manufacturing

Materials Letters
2022-05 | Journal article
Part of ISSN: 0167-577X
Source: Self-asserted source
A. Rajesh Kannan
grade
Preferred source (of 3)‎

Microstructure and Mechanical Properties of wrought Al0.2CoCrFeNiMo0.5 High Entropy Alloy Using Gas Tungsten Arc Welding Process

Materials Letters
2022-03 | Journal article
Part of ISSN: 0167-577X
Source: Self-asserted source
A. Rajesh Kannan
grade
Preferred source (of 3)‎

Microstructure and corrosion resistance of Ni-Cu alloy fabricated through wire arc additive manufacturing

Materials Letters
2022-02 | Journal article
Part of ISSN: 0167-577X
Source: Self-asserted source
A. Rajesh Kannan
grade
Preferred source (of 3)‎

Fabrication of Gas Metal Arc Welding Based Wire Plus Arc Additive Manufactured 347 Stainless Steel Structure: Behavioral Analysis Through Experimentation and Finite Element Method

Metals and Materials International
2022-01 | Journal article
Part of ISSN: 1598-9623
Part of ISSN: 2005-4149
Source: Self-asserted source
A. Rajesh Kannan
grade
Preferred source (of 3)‎

Resistance Spot-Welded Dissimilar Sheets—Parametric Behavioral Analysis using Experimentation and Simulation

Transactions of the Indian Institute of Metals
2022-01-27 | Journal article
Part of ISSN: 0972-2815
Part of ISSN: 0975-1645
Source: Self-asserted source
A. Rajesh Kannan
grade
Preferred source (of 3)‎

Fatigue Behavior of Austenitic Stainless Steel 347 Fabricated via Wire Arc Additive Manufacturing

Journal of Materials Engineering and Performance
2021 | Journal article
EID:

2-s2.0-85110898845

Part of ISSN: 15441024 10599495
Contributors: Duraisamy, R.; Kumar, S.M.; Kannan, A.R.; Shanmugam, N.S.; Sankaranarayanasamy, K.
Source: Self-asserted source
A. Rajesh Kannan via Scopus - Elsevier
grade
Preferred source (of 2)‎

Microstructural characterization and mechanical integrity of stainless steel 316L clad layers deposited via wire arc additive manufacturing for nuclear applications,Gefügecharakterisierung und mechanisches Widerstandsvermögen von additiv gefertigten Auftragschweißlagen aus rostfreiem Stahl X2CrNiMo17-12-2 (1.4404) mit Draht-Lichtbogentechnik für nukleare Anwendungen

Materialwissenschaft und Werkstofftechnik
2021 | Journal article
EID:

2-s2.0-85108146933

Part of ISSN: 15214052 09335137
Contributors: Kannan, A.R.; Kumar, S.M.; Pramod, R.; Shanmugam, N.S.; Vishnukumar, M.; Naveenkumar, S.
Source: Self-asserted source
A. Rajesh Kannan via Scopus - Elsevier
grade
Preferred source (of 2)‎

Microstructure and mechanical properties of dissimilar aluminum alloys AA5052-H32 and AA2219-T31 welded using cold metal transfer process

Materials Performance and Characterization
2021 | Journal article
EID:

2-s2.0-85116981670

Part of ISSN: 21653992
Contributors: Rajesh Kannan, A.; Mohan Kumar, S.; Pramod, R.; Siva Shanmugam, N.; Palguna, Y.; Vishnukumar, M.
Source: Self-asserted source
A. Rajesh Kannan via Scopus - Elsevier
grade
Preferred source (of 2)‎

Studies on the Fatigue Performance of Wire and Arc Additive Manufactured SS 904L

Proceedings of the Eleventh International Conference on Management Science and Engineering Management
2021 | Journal article
Contributors: Sharath Rajendran; A. Rajesh Kannan; B. Suresha; N. Siva Shanmugam
Source: check_circle
Web of Science Researcher Profile Sync

Microstructural administered mechanical properties and corrosion behaviour of wire plus arc additive manufactured SS 321 plate

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
2021-12 | Journal article
Part of ISSN: 0954-4062
Part of ISSN: 2041-2983
Source: Self-asserted source
A. Rajesh Kannan
grade
Preferred source (of 4)‎

Microstructure and fatigue behaviour of spin-arc welded AISI C1018 low carbon steel

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
2021-12 | Journal article
Contributors: K Parthiban; S Mohan Kumar; A Rajesh Kannan; N Siva Shanmugam; K Sankaranarayanasamy
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Experimental studies on friction stir welding of aluminium alloy 5083 and prediction of temperature distribution using arbitrary Lagrangian–Eulerian-based finite element method

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
2021-12-21 | Journal article
Part of ISSN: 1464-4207
Part of ISSN: 2041-3076
Source: Self-asserted source
A. Rajesh Kannan
grade
Preferred source (of 4)‎

Wire arc additive manufacturing for repairing aluminium structures in marine applications

Materials Letters
2021-09 | Journal article
Part of ISSN: 0167-577X
Source: Self-asserted source
A. Rajesh Kannan
grade
Preferred source (of 3)‎

Evaluation of High Cycle Fatigue Properties of Double Side Welded AISI 321 Plates Using GTAW Process for Pressure Vessels

Journal of Pressure Vessel Technology
2021-06-11 | Journal article
Part of ISSN: 0094-9930
Part of ISSN: 1528-8978
Source: Self-asserted source
A. Rajesh Kannan
grade
Preferred source (of 4)‎

Studies on Super Duplex Stainless Steel Manufactured by Wire Arc Additive Manufacturing

Transactions of the Indian Institute of Metals
2021-04-29 | Journal article
Part of ISSN: 0972-2815
Part of ISSN: 0975-1645
Source: Self-asserted source
A. Rajesh Kannan
grade
Preferred source (of 3)‎

Experimental and numerical studies on the influence of formability of AISI 316L tailor-welded blanks at different weld line orientations

Journal of the Brazilian Society of Mechanical Sciences and Engineering
2021-03 | Journal article
Part of ISSN: 1678-5878
Part of ISSN: 1806-3691
Source: Self-asserted source
A. Rajesh Kannan
grade
Preferred source (of 3)‎
Items per page:
Page 1 of 2

Peer review (83 reviews for 23 publications/grants)

Review activity for 3D printing and additive manufacturing. (1)
Review activity for Advances in materials and processing technologies. (1)
Review activity for Anti-corrosion methods and materials. (1)
Review activity for Applied physics. (3)
Review activity for Engineering research express. (10)
Review activity for Environmental science and pollution research international (2)
Review activity for IJIDEM. (2)
Review activity for Journal of alloys and compounds. (1)
Review activity for Journal of the Brazilian Society of Mechanical Sciences and Engineering. (1)
Review activity for Materials research express. (10)
Review activity for Materials science & engineering. (2)
Review activity for Materials. (4)
Review activity for Metals and materials international (1)
Review activity for Metals. (2)
Review activity for Physica scripta. (1)
Review activity for Proceedings of the Institution of Mechanical Engineers. (9)
Review activity for Proceedings of the Institution of Mechanical Engineers. (6)
Review activity for Progress in additive manufacturing. (1)
Review activity for Science of the total environment. (2)
Review activity for Scripta materialia. (2)
Review activity for Surface & coatings technology. (9)
Review activity for Transactions of the Indian Institute of Metals (5)
Review activity for Vacuum. (7)