Personal information

India

Activities

Employment (6)

JIS College of Engineering, Kalyani: Kalyani, West Bengal, IN

2022-04-01 to present | Associate Professor (Mechanical Engineering)
Employment
Source: Self-asserted source
AnalRanjan Sengupta

JIS College of Engineering: Kalyani, West Bengal, IN

2019-03-08 to 2021-03-31 | Assistant Professor (Mechanical Engineering)
Employment
Source: Self-asserted source
AnalRanjan Sengupta

National Institute of Technology Mizoram: Aizawl, Mizoram, IN

2018-07-31 to 2019-01-23 | Temporary Faculty (Mechanical Engineering)
Employment
Source: Self-asserted source
AnalRanjan Sengupta

National Institute Of Technology Silchar: Silchar, Assam, IN

2017-07-26 to 2018-06-30 | Temporary Faculty (Mechanical Engineering)
Employment
Source: Self-asserted source
AnalRanjan Sengupta

Girijananda Chowdhury Institute of Management and Technology: Guwahati, Assam, IN

2016-09-01 to 2017-07-24 | Assistant Professor (Mechanical Engineering)
Employment
Source: Self-asserted source
AnalRanjan Sengupta

ICFAI University Tripura: Sadar, Tripura, IN

2012-08-08 to 2013-07-11 | Faculty Member (Mechanical Engineering)
Employment
Source: Self-asserted source
AnalRanjan Sengupta

Education and qualifications (3)

National Institute Of Technology Silchar: Silchar, Assam, IN

2013 to 2016 | Ph.D (Mechnical Engineering)
Education
Source: Self-asserted source
AnalRanjan Sengupta

National Institute Of Technology Silchar: Silchar, Assam, IN

2010 to 2012 | M.Tech (Mechanical Engineering)
Qualification
Source: Self-asserted source
AnalRanjan Sengupta

National Institute of Technology Agartala: Agartala, Tripura, IN

2006 to 2010 | B.E (Mechanical Engineering)
Education
Source: Self-asserted source
AnalRanjan Sengupta

Professional activities (3)

Society of Automotive Engineers, India: West Bengal, IN

Annual (Mechanical Engineering)
Membership
Source: Self-asserted source
AnalRanjan Sengupta

International Association of Engineers: West Bengal, IN

Life member (Mechanical Engineering)
Membership
Source: Self-asserted source
AnalRanjan Sengupta

Institution of Engineers India: Kolkata, West Bengal, IN

Associate Member (AM1801719) (Mechanical Engineering)
Membership
Source: Self-asserted source
AnalRanjan Sengupta

Works (30)

Influence of Sustainable Lubrication on the Tribological Behaviour of Phosphorus Bronze

2025 | Book chapter
Contributors: Aman Kumar; Palash Biswas; Anal Ranjan Sengupta; Thia Paul
Source: check_circle
Crossref

Wind tunnel investigation of blade pitch effect for performance improvement of an asymmetric bladed H-Darrieus VAWT under low wind speed condition

International Journal of Ambient Energy
2024-12-31 | Journal article
Contributors: Hussain Mahamed Sahed Mostafa Mazarbhuiya; Anal Ranjan Sengupta; Agnimitra Biswas; Kaushal Kumar Sharma
Source: check_circle
Crossref

Experimental and computational investigations of the influence of elliptical and square-shaped dimples on performance of NACA 6409 blade profile

Journal of the Brazilian Society of Mechanical Sciences and Engineering
2024-11-26 | Journal article
Part of ISSN: 1678-5878
Part of ISSN: 1806-3691
Contributors: Vijaya Raju Kalugotla; Lav Dhar Dubey; Rajat Gupta; Anal Ranjan Sengupta
Source: Self-asserted source
AnalRanjan Sengupta

Blade shape optimization of H-Darrieus wind turbine using CFD analysis

Intelligent Computation and Analytics on Sustainable Energy and Environment
2024-10-03 | Book chapter
Part of ISBN: 9781003540199
Contributors: Sourav Kanthal; Kazi Ganiur Rahman; Prodipta Samanta; Satyaki Birbanshi; Sagar Chemjong; Ashwini Routh; Anal Ranjan Sengupta; Thia Paul; Palash Biswas
Source: Self-asserted source
AnalRanjan Sengupta

A Review on the Effect of Different Performance Parameters of H-Darrieus Turbines

Lecture Notes in Mechanical Engineering
2024-08-28 | Book chapter
Part of ISBN: 9789819744992
Part of ISBN: 9789819745005
Part of ISSN: 2195-4356
Part of ISSN: 2195-4364
Contributors: Abhik Mukhopadhyay; Ankita Sharma; Ashif Hossain; Shamik Roy; Sandeep Singha; Debargha Modak; Amit Kumar Gupta; Abhishek Shaw; Arnab Sarkar; Nabarun Paul et al.
Source: Self-asserted source
AnalRanjan Sengupta

Investigation on Aerodynamic Performance of Unsymmetrical Blade Profile by Experimental and CFD Analysis

Lecture Notes in Mechanical Engineering
2024-06-11 | Book chapter
Part of ISBN: 9789819708994
Part of ISBN: 9789819709007
Part of ISSN: 2195-4356
Part of ISSN: 2195-4364
Contributors: Lav Dhar Dubey; Vijaya Raju Kalugotla; Rajat Gupta; Anal Ranjan Sengupta
Source: Self-asserted source
AnalRanjan Sengupta
grade
Preferred source (of 2)‎

A review on the effect of different performance parameters of H-darrieus turbines

Challenges and Opportunities in Industrial and Mechanical Engineering: A Progressive Research Outlook
2024-05-31 | Book chapter
Part of ISBN: 9781032713229
Contributors: Amit Kumar Gupta; Abhik Mukhopadhyay; Arnab Sarkar; Abhishek Shaw; Nabarun Paul; Anal Ranjan Sengupta
Source: Self-asserted source
AnalRanjan Sengupta

Performance of compound parabolic collector integrated with organic Rankine cycle under low mass flow rates for clean energy

International Journal of Environmental Science and Technology
2024-04-05 | Journal article
Part of ISSN: 1735-1472
Part of ISSN: 1735-2630
Contributors: A. Bhaumick; A. R. Sengupta; A. Biswas; D. Das
Source: Self-asserted source
AnalRanjan Sengupta
grade
Preferred source (of 2)‎

Experimental investigation of solar evacuated tube collector with multi-walled carbon nanotube-water-based nanofluid

Energy Sources, Part A: Recovery, Utilization and Environmental Effects
2023 | Journal article
Contributors: Thota, Raju; Biswas, Agnimitra; Das, Biplab; Sengupta, Anal Ranjan
Source: check_circle
Web of Science Researcher Profile Sync
grade
Preferred source (of 2)‎

Advancements in solar assisted drying technologies: A comprehensive review post 2017

Journal of Stored Products Research
2023-12 | Journal article
Part of ISSN: 0022-474X
Contributors: Prayag Raj Chanda; Bishal Podder; Agnimitra Biswas; Anal Ranjan Sengupta
Source: Self-asserted source
AnalRanjan Sengupta
grade
Preferred source (of 2)‎

A Comparative Study of the Justifications Provided for Aerodynamic Lift

Advances in Sustainability Science and Technology
2023-09-16 | Book chapter
Part of ISBN: 9789819941742
Part of ISBN: 9789819941759
Part of ISSN: 2662-6829
Part of ISSN: 2662-6837
Contributors: Abhik Mukhopadhyay; Anal Ranjan Sengupta; Gautam Choubey
Source: Self-asserted source
AnalRanjan Sengupta

Performance investigation of cavity shaped blade on H-Darrieus wind turbine in built environmental condition

Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
2022-02-14 | Journal article
Contributors: Anal Ranjan Sengupta; Yogesh Kumar; Agnimitra Biswas; Rajat Gupta
Source: check_circle
Crossref

A Brief Review on the Performances of Two-Bladed and Three-Bladed H-Darrieus Rotors

Lecture Notes in Electrical Engineering
2022-01 | Book chapter
Part of ISBN: 9789811691539
Part of ISBN: 9789811691546
Part of ISSN: 1876-1100
Part of ISSN: 1876-1119
Source: Self-asserted source
AnalRanjan Sengupta
grade
Preferred source (of 2)‎

Performance Study of a Cambered Blade H-Rotor by CFD Analysis

Lecture Notes in Electrical Engineering
2022-01 | Book chapter
Part of ISBN: 9789811691539
Part of ISBN: 9789811691546
Part of ISSN: 1876-1100
Part of ISSN: 1876-1119
Source: Self-asserted source
AnalRanjan Sengupta
grade
Preferred source (of 2)‎

CFD Analysis of the Performance of an H-Darrieus Wind Turbine Having Cavity Blades

Recent Advances in Mechanical Engineering. Select Proceedings of ICRAME. Lecture Notes in Mechanical Engineering (LNME)
2021 | Journal article
Contributors: Kumar, Y.; Sengupta, A.R.; Biswas, A.; Mazarbhuiya, H.M.S.M.; Gupta, R.
Source: check_circle
Web of Science Researcher Profile Sync

Review of the Hybrid H-Savonius Rotor's Design and Performance

Recent Advances in Mechanical Engineering. Select Proceedings of ICRAME. Lecture Notes in Mechanical Engineering (LNME)
2021 | Journal article
Contributors: Sarkar, D.; Sengupta, A.R.; Bhadra, P.; Alam, S.; Debnath, B.
Source: check_circle
Web of Science Researcher Profile Sync

Aerodynamic analysis of cambered blade H-Darrieus rotor in low wind velocity using CFD

Wind and Structures
2021-12-25 | Journal article
Source: Self-asserted source
AnalRanjan Sengupta
grade
Preferred source (of 2)‎

Performance analysis of a two bladed Savonius water turbine cluster for perennial river-stream application at low water speeds

Journal of the Brazilian Society of Mechanical Sciences and Engineering
2021-05 | Journal article
Part of ISSN: 1678-5878
Part of ISSN: 1806-3691
Source: Self-asserted source
AnalRanjan Sengupta
grade
Preferred source (of 2)‎

CFD analysis of the performance of an H-Darrieus wind turbine having cavity blades

Recent Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering
2021-01-11 | Book chapter
Source: Self-asserted source
AnalRanjan Sengupta

Review of the Hybrid H-Savonius Rotor’s Design and Performance

Recent Advances in Mechanical Engineering, Lecture Notes in Mechanical Engineering
2021-01-11 | Book chapter
Source: Self-asserted source
AnalRanjan Sengupta

Comparison of low wind speed aerodynamics of unsymmetrical blade H-Darrieus rotors-blade camber and curvature signatures for performance improvement

Renewable Energy
2019 | Journal article
Contributors: Sengupta, A. R.; Biswas, A.; Gupta, R.
Source: check_circle
Web of Science Researcher Profile Sync
grade
Preferred source (of 2)‎

Computational Fluid Dynamics Analysis of Stove Systems for Cooking and Drying of Muga Silk

Emerging Science Journal
2019-10-01 | Journal article
Part of ISSN: 2610-9182
Source: Self-asserted source
AnalRanjan Sengupta
grade
Preferred source (of 2)‎

Review of Experimental and Computational Analysis of Coaxial H-Savonius Vertical Axis Wind Rotor

SSRN Electronic Journal
2019-01-04 | Journal article
Part of ISSN: 1556-5068
Source: Self-asserted source
AnalRanjan Sengupta
grade
Preferred source (of 2)‎

Investigations of H-Darrieus rotors for different blade parameters at low wind speeds

Wind and Structures
2017 | Journal article
Contributors: Sengupta, Anal R.; Biswas, Agnimitra; Gupta, Rajat
Source: check_circle
Web of Science Researcher Profile Sync
grade
Preferred source (of 2)‎

The aerodynamics of high solidity unsymmetrical and symmetrical blade H-Darrieus rotors in low wind speed conditions

Journal of Renewable and Sustainable Energy
2017 | Journal article
Contributors: Sengupta, A. R.; Biswas, A.; Gupta, R.
Source: check_circle
Web of Science Researcher Profile Sync
grade
Preferred source (of 2)‎

An analysis of Wind energy potential of Silchar (Assam, India) by using different models

International Journal of Engineering and Management Sciences
2016 | Journal article
Source: Self-asserted source
AnalRanjan Sengupta

Studies of some high solidity symmetrical and unsymmetrical blade H-Darrieus rotors with respect to starting characteristics, dynamic performances and flow physics in low wind streams

Renewable Energy
2016 | Journal article
Contributors: Sengupta, A. R.; Biswas, A.; Gupta, R.
Source: check_circle
Web of Science Researcher Profile Sync
grade
Preferred source (of 2)‎

Vertical Axis Wind Turbines in the Built Environment ‒ A Review

ISESCO Journal of Science and Technology
2016 | Journal article
Source: Self-asserted source
AnalRanjan Sengupta

Experimental Analysis of a High Solidity Cambered Blade H-Rotor in Low Wind Streams

6th International and 43rd National Conference on Fluid Mechanics and Fluid Power
2016-12-15 | Conference paper
Source: Self-asserted source
AnalRanjan Sengupta

A statistical analysis of Wind energy potential of Agartala (Tripura, India) based on different models- a case study

International Journal of Advanced Information Science and Technology
2015 | Journal article
Source: Self-asserted source
AnalRanjan Sengupta

Peer review (4 reviews for 3 publications/grants)

Review activity for Energy conversion and management. (1)
Review activity for Ocean engineering. (1)
Review activity for Renewable energy. (2)