Personal information

Other IDs

Scopus Author ID: 57191250034

Biography

Paulus Wisnu Anggoro (P.W. Anggoro) obtained a Doctoral degree from Mechanical Engineering Department of the University of Diponegoro, Indonesia, in 2018. His research interest is product design on an ankle foot orthotic and artificial legs based on Reverse Innovative Design Engineering with modern technology of computer aided reverse engineering system (CARESystem) for orthotic and prosthetic patients. His focus area research on industry also focus on ceramic table ware and tile, medical device, manufacturing polymer material and rubber.

Activities

Collapse all

Employment (2)

Universitas Atma Jaya Yogyakarta: Yogyakarta, Daerah Istimewa Yogyakart, ID

1997-01-16 to present | Dr. Tech. (Industrial engineering )
Employment
Source: Self-asserted source
paulus wisnu anggoro

Universitas Diponegoro: Semarang, Jawa Tengah, ID

2015-09-12 to 2018-10-23 | Dr. (Mechanical engineering)
Employment
Source: Self-asserted source
paulus wisnu anggoro

Education and qualifications (4)

Universitas Atma Jaya Yogyakarta: Yogyakarta, Daerah Istimewa Yogyakart, ID

Dr (industrial engineering)
Education
Source: Self-asserted source
paulus wisnu anggoro

Diponegoro University: Semarang, Central Java , ID

2015-09-01 to 2018-10-26 | Doctor of Mechanical Engineering (Mechanical Engineering )
Education
Source: Self-asserted source
paulus wisnu anggoro

Institut Teknologi Sepuluh Nopember Fakultas Teknologi Industri: Surabaya, East Java, ID

2000-07-01 to 2002-08-01 | Master Technique (Industrial Engineering )
Education
Source: Self-asserted source
paulus wisnu anggoro

Diponegoro University: Semarang, Central Java , ID

1991-07-01 to 1996-08-02 | B.Eng (Mechanical Engineering )
Education
Source: Self-asserted source
paulus wisnu anggoro

Professional activities (2)

SIBAD Undip Group Research : Semarang, Central Java, ID

2019-04-01 to present | pilot project (Mechanical Engineering and Industrial Engineering)
Membership
Source: Self-asserted source
paulus wisnu anggoro

CBioM3S: Semarang, Central Java, ID

2018-10-23 to present | member (Mechanical Engineering )
Membership
Source: Self-asserted source
paulus wisnu anggoro

Works (29)

Optimization of the Additive Manufacturing Parameters of Polylactic Acid Interference Screw on Dimensional Accuracy

2025 | Book chapter
DOI: 10.1007/978-981-97-3859-5_27
Contributors: Lusia Permata Sari Hartanti; B. Bawono; T. Yuniarto; J. Mulyono; J. J. Nauolim; R. Ismail; J. Jamari; A. P. Bayuseno; P. W. Anggoro
Source: check_circle
Crossref

Recent progress and perspective in material and manufacturing of interference screw

Cogent Engineering
2024-12-31 | Journal article
DOI: 10.1080/23311916.2024.2364048
Contributors: Lusia Permata Sari Hartanti; Baju Bawono; Tonny Yuniarto; Julius Mulyono; R. Ismail; Jamari J.; Athanasius Priharyoto Bayuseno; Paulus Wisnu Anggoro
Source: check_circle
Crossref

Ergonomic cup handle design analysis at Naruna Ceramic Studio: A literature review

Cogent Engineering
2023-12-31 | Journal article
DOI: 10.1080/23311916.2023.2253035
Contributors: Irrine Carolline Stefani Agung; Teguh Siswantoro; Baju Bawono; Paulus Wisnu Anggoro
Source: check_circle
Crossref

Experimental investigation of SC108 clamping components hardening parameter based on AISI 4140 steel to distortion minimization

Cogent Engineering
2023-12-31 | Journal article
DOI: 10.1080/23311916.2023.2234716
Contributors: Kristian Ismartaya; Roberts Purnomo; Baju Bawono; Paulus Wisnu Anggoro
Source: check_circle
Crossref

Optimization of Parameter for Cutting Condition of Uhmwpe Acetabular Cup Based On Taguchi and Desirability Functions

Cogent Engineering
2023-12-31 | Journal article
DOI: 10.1080/23311916.2023.2233247
Contributors: Y.A.W. Ninggar; P.W. Anggoro; B. Bawono; D.B. Setyohad; M. Tauviqirrahman; J. Jamari
Source: check_circle
Crossref

Optimization of Characteristics Polymer Composite Reinforced Kenaf and Jute Fiber Using Taguchi-Response Surface Methodology Approach

Journal of Natural Fibers
2023-11 | Journal article
DOI: 10.1080/15440478.2023.2204453
Contributors: Haniel; B. Bawono; P.W Anggoro
Source: check_circle
Crossref

Optimisation of the machining time required by insole orthotic shoes for patients with clubfoot using the Taguchi and response surface methodology approach

Heliyon
2023-06 | Journal article
DOI: 10.1016/j.heliyon.2023.e16860
Contributors: P.W. Anggoro; B. Bawono; D.B. Setyohadi; L. Ratnasari; P.K. Fergiawan; M. Tauviqirrahman; J. Jamari; A.P. Bayuseno
Source: check_circle
Crossref

The Application of Linear Programming for the Optimal Profit of Pt. Naruna Using the Simplex Method

Management Systems in Production Engineering
2023-06-01 | Journal article
DOI: 10.2478/mspe-2023-0016
Contributors: Eka Auliya Syifa; Tita Nuril Istiqomah; Nikken Prima Puspita; Lucia Ratnasari; Siti Khabibah; Paulus Wisnu Anggoro; Baju Bawono
Source: check_circle
Crossref

Virtual design and machining of core and cavity for fabrication of dining plate tableware with Kawung batik pattern

Cogent Engineering
2022-12-31 | Journal article
DOI: 10.1080/23311916.2022.2084985
Contributors: P.W. Anggoro; M.B. Krishnayuda; T. Yuniarto; B. Bawono; Y. Suharyanti; S. Felasari; D.B. Setyohadi; O.K.W. Widyanarka; A.P. Bayuseno; Zude Zhou
Source: check_circle
Crossref

Application of fused deposition modeling (FDM) on bone scaffold manufacturing process: A review

Heliyon
2022-11 | Journal article
DOI: 10.1016/j.heliyon.2022.e11701
Contributors: Rochmad Winarso; P.W. Anggoro; Rifky Ismail; J. Jamari; A.P. Bayuseno
Source: check_circle
Crossref

Reverse engineering from 3D mesh to ceramic product in the form of miranda kerr tea for one teapot in PT doulton Indonesia

Cogent Engineering
2021-01-01 | Journal article
DOI: 10.1080/23311916.2021.1981522
Contributors: P.W. Anggoro; A.R. Tan Wijaya; T. Yuniarto; A.P. Bayuseno; J. Jamari; M. Tauviqirrahman; D.B. Setyohadi; Zude Zhou
Source: check_circle
Crossref

Ankle Foot Orthotic (AFO) for Deformity Patients: The Design and Manufacturing of Shoes Orthotics

2020 | Book chapter
DOI: 10.1007/978-981-15-4481-1_50
Contributors: P. W. Anggoro; B. Bawono; T. Yuniarto; J. Jamari; A. P. Bayuseno
Source: check_circle
Crossref

Ceramic Jewelry with Texture and Ornament Islamic Pattern and Batik Indonesia—Design, Manufacturing, and Fabrication

2020 | Book chapter
DOI: 10.1007/978-981-15-4481-1_69
Contributors: P. K. Fergiawan; P. W. Anggoro; A. T. Yuniarto; K. B. Purwanto; O. D. W. Widyanarka
Source: check_circle
Crossref

Puzzle Islamic Floral Patterns Product Tiles for Wall and Ceiling to Decorate of Al Huda Mosque Indonesia—Design, Manufacturing, and Fabrication

2020 | Book chapter
DOI: 10.1007/978-981-15-4481-1_51
Contributors: P. W. Anggoro; A. T. Yuniarto; M. Tauviqirrahman; J. Jamari; A. P. Bayuseno; K. B. Purwanto; O. K. W. Widyanarka
Source: check_circle
Crossref

DESIGN AND MANUFACTURING ORTHOTICS SHOE INSOLE WITH OPTIMUM SURFACE ROUGHNESS USING THE CNC MILLING

Journal of Engineering Science and Technology
2019-08-01 | Journal article
Source: Self-asserted source
paulus wisnu anggoro

Milling strategy optimized for orthotics insole to enhance surface roughness and machining time by Taguchi and response surface methodology

Journal of Industrial and Production Engineering
2019-05-19 | Journal article
DOI: 10.1080/21681015.2019.1646327
Contributors: B. Bawono; P.W. Anggoro; A.P. Bayuseno; J. Jamari; M. Tauviqirrahman
Source: check_circle
Crossref

Optimal Design and Fabrication of Shoe Lasts for Ankle Foot Orthotics for Patients With Diabetes

International Journal of Manufacturing, Materials, and Mechanical Engineering
2019-04-01 | Journal article
Source: Self-asserted source
paulus wisnu anggoro

OPTIMIZATION OF CNC MILLING PARAMETERS THROUGH THE TAGUCHI AND RSM METHODS FOR SURFACE ROUGHNESS OF UHMWPE ACETABULAR CUP

International Journal of Mechanical Engineering and Technology (IJMET)
2019-02-03 | Journal article
Source: Self-asserted source
paulus wisnu anggoro

Reverse innovative design of insole shoes orthotic for diabetci patients

Journal of Engineering Applied Sciences
2019-01-17 | Journal article
Source: Self-asserted source
paulus wisnu anggoro

The Evaluation of the Use of AFO (Ankle Foot Orthotics) with the MOXFQ (Manchester-Oxford Foot Questionnaire) Method

Atlantis Highlights in Engineering (AHE)
2018-09-06 | Conference paper
Source: Self-asserted source
paulus wisnu anggoro

The influence of Tool Path Strategies on surface roughness and machining time in the CNC milling of UHMWPE

Journal of Engineering and Applied Sciences
2018-06-01 | Journal article
Source: Self-asserted source
paulus wisnu anggoro

Computer-aided reverse engineering system in the design and production of orthotic insole shoes for patients with diabetes

Cogent Engineering
2018-01-01 | Journal article
DOI: 10.1080/23311916.2018.1470916
Contributors: Paulus Wisnu Anggoro; M. Tauviqirrahman; J. Jamari; A. P. Bayuseno; B. Bawono; M. M. Avelina; Zhongmin Jin
Source: check_circle
Crossref

A 3-dimensional finite element analysis of the insole shoe orthotic for foot deformities

International Journal of Applied Engineering Research
2017 | Journal article
EID:

2-s2.0-85028296911
Contributors: Anggoro, P.W.; Saputra, E.; Tauviqirrahman, M.; Jamari, J.; Bayuseno, A.P.
Source: Self-asserted source
paulus wisnu anggoro via Scopus - Elsevier

Investigation of optimal proses parameters in CNC milling of insole shoe orthotic using taguchi- fuzzy approach

International Journal of Applied Engineering Research
2017 | Journal article
EID:

2-s2.0-85039773673
Contributors: Bawono, B.; Anggoro, P.W.; Tauviqirrahman, M.; Jamari, J.; Bayuseno, A.P.
Source: Self-asserted source
paulus wisnu anggoro via Scopus - Elsevier

Determining Optimal Toolpath Strategy in the Manufacture of Insole Shoe Orthotic Made from Eva Foam Rubber for Diabetes Patients

Advanced Science Letters
2017-12-01 | Journal article
Source: Self-asserted source
paulus wisnu anggoro

Optimization of Manufacturing Process Parameters for the Product of ISO-Diabetes Patients with High Risk Classes

Advanced Science Letters Vol. 23, 11910–11917, 2017
2017-12-01 | Journal article
Source: Self-asserted source
paulus wisnu anggoro

Parameter optimization of strategies at CNC end milling machine Roland modela MDX - 40R Cam against surface roughness made insoles shoe orthotic EVA rubber foam

International Journal of Mechanical and Mechatronics Engineering
2016 | Journal article
EID:

2-s2.0-84988352973
Contributors: Anggoro, P.W.; Bawono, B.; Andreyas, W.; Jamari, J.; Bayuseno, A.P.
Source: Self-asserted source
paulus wisnu anggoro via Scopus - Elsevier

Reverse Engineering Technology in Redesign Process Ceramics: Application for CNN Plate

Procedia Manufacturing
2015 | Journal article
DOI: 10.1016/j.promfg.2015.11.071
EID:

2-s2.0-85019362597
Contributors: Anggoro, P.W.; Bawono, B.; Sujatmiko, I.
Source: Self-asserted source
paulus wisnu anggoro via Scopus - Elsevier

Optimization Parameters Tooling Design to Increase the Surface Quality of Orthotic Insole Shoes using the Taguchi Approach and Surface Response Methods

Materials Today: Proceedings
Conference paper
Source: Self-asserted source
paulus wisnu anggoro
How many people are using ORCID?