Personal information

Other IDs

Scopus Author ID: 56661452200

Keywords

Friction stir welding, Aluminum alloy, Magnesium alloy, Steel

Countries

Japan

Activities

Collapse all

Employment (2)

Osaka Research Institute of Industrial Science and Technology: Osaka, JP

2017-04-01 to present | Senior Research scientist (Research Division of Metallic Materials )
Employment
Source: Self-asserted source
Tsutomu Tanaka

Technology Research Institute of Osaka Prefecture: Izumi, JP

2005-04-01 to 2017-03-31 | Senior Research scientist (Metals & Machinery Department)
Employment
Source: Self-asserted source
Tsutomu Tanaka

Education and qualifications (1)

Osaka Prefecture University: Sakai, JP

2003-04-01 to 2006-03-31 | PhD degree (Department of Materials Science)
Education
Source: Self-asserted source
Tsutomu Tanaka

Works (28)

Convex structure formation on a Cu substrate by friction stirring using a tool wrapped with Ti foil

Results in Surfaces and Interfaces
2024-10 | Journal article
DOI: 10.1016/j.rsurfi.2024.100282
Contributors: Hirosuke Sonomura; Kazuaki Katagiri; Tomoatsu Ozaki; Yasunori Hasegawa; Tsutomu Tanaka
Source: check_circle
Crossref

Mechanism of intermetallic compound formation during the dissimilar friction stir welding of aluminum and steel

Journal of Materials Science
2020-03-10 | Journal article
DOI: 10.1007/s10853-019-04106-2
Contributors: Tsutomu Tanaka; Masayuki Nezu; Sohei Uchida; Tomotake Hirata
Source: check_circle
Crossref

Interface microstructure observation for welds of an alumina ceramics and an aluminum alloy with friction stir spot welding

Journal of the Ceramic Society of Japan
2019 | Journal article
DOI: 10.2109/jcersj2.18106
EID:

2-s2.0-85061298117
Contributors: Sonomura, H.; Ozaki, T.; Katagiri, K.; Hasegawa, Y.; Tanaka, T.
Source: Self-asserted source
Tsutomu Tanaka via Scopus - Elsevier

Estimation of residual stress distribution under shot-peened surface by using theory of thermal stress analysis

Zairyo/Journal of the Society of Materials Science, Japan
2017 | Journal article
DOI: 10.2472/jsms.66.508
EID:

2-s2.0-85025459611
Contributors: Okano, T.; Murata, K.; Oguri, T.; Tanaka, T.; Kawakami, H.; Sato, Y.
Source: Self-asserted source
Tsutomu Tanaka via Scopus - Elsevier

X-ray stress measurement of the cylindrical surface by the cosα Method

Zairyo/Journal of the Society of Materials Science, Japan
2017 | Journal article
DOI: 10.2472/jsms.66.488
EID:

2-s2.0-85025439642
Contributors: Oguri, T.; Tanaka, T.; Okano, T.; Murata, K.; Kawakami, H.; Sato, Y.
Source: Self-asserted source
Tsutomu Tanaka via Scopus - Elsevier

Analysis of material flow in the sheet forming of friction-stir welds on alloys of mild steel and aluminum

Journal of Materials Processing Technology
2015 | Journal article
DOI: 10.1016/j.jmatprotec.2015.06.030
EID:

2-s2.0-84938094481
Contributors: Tanaka, T.; Hirata, T.; Shinomiya, N.; Shirakawa, N.
Source: Self-asserted source
Tsutomu Tanaka via Scopus - Elsevier

Effect of pre-compressive strain on work-hardening behavior upon two-step loading in a magnesium alloy sheet

Key Engineering Materials
2015 | Book
DOI: 10.4028/www.scientific.net/KEM.639.347
EID:

2-s2.0-84930154243
Contributors: Hama, T.; Tanaka, Y.; Uratani, M.; Tanaka, T.; Fujimoto, H.; Takuda, H.
Source: Self-asserted source
Tsutomu Tanaka via Scopus - Elsevier

X-ray stress measurement of the circumferential residual stress on the inner surface of a hole

Zairyo/Journal of the Society of Materials Science, Japan
2015 | Journal article
DOI: 10.2472/jsms.64.554
EID:

2-s2.0-84939782880
Contributors: Oguri, T.; Tanaka, T.; Okano, T.; Murata, K.
Source: Self-asserted source
Tsutomu Tanaka via Scopus - Elsevier

Formation mechanism of intermetallic compound at the weld interface of dissimilar friction stir welded joint of pure aluminum and mild steel

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society
2011 | Journal article
DOI: 10.2207/qjjws.29.101
EID:

2-s2.0-79960825611
Contributors: Tsutomu, T.; Taiki, M.; Tomotake, H.
Source: Self-asserted source
Tsutomu Tanaka via Scopus - Elsevier

Comprehensive analysis of joint strength for dissimilar friction stir welds of mild steel to aluminum alloys

Scripta Materialia
2009 | Journal article
DOI: 10.1016/j.scriptamat.2009.06.022
EID:

2-s2.0-67651095832
Contributors: Tanaka, T.; Morishige, T.; Hirata, T.
Source: Self-asserted source
Tsutomu Tanaka via Scopus - Elsevier

Effect of temperature on the cavity nucleation rate for fine-grained Zn-22 wt.% Al alloy

Scripta Materialia
2008 | Journal article
DOI: 10.1016/j.scriptamat.2007.11.028
EID:

2-s2.0-39149093972
Contributors: Tanaka, T.; Takigawa, Y.; Higashi, K.
Source: Self-asserted source
Tsutomu Tanaka via Scopus - Elsevier

Low cycle fatigue behavior of Zn-22Al alloy in superplastic region and non-superplastic region

International Journal of Modern Physics B
2008 | Journal article
EID:

2-s2.0-62249084649
Contributors: Kushibe, A.; Tanaka, T.; Takigawa, Y.; Higashi, K.
Source: Self-asserted source
Tsutomu Tanaka via Scopus - Elsevier

Low-cycle fatigue properties of ultrafine-grained zinc-22 wt.% aluminum alloy during room-temperature superplastic flow

Scripta Materialia
2008 | Journal article
DOI: 10.1016/j.scriptamat.2008.03.005
EID:

2-s2.0-43449133254
Contributors: Tanaka, T.; Kushibe, A.; Kohzu, M.; Takigawa, Y.; Higashi, K.
Source: Self-asserted source
Tsutomu Tanaka via Scopus - Elsevier

Development of practical friction stir welding technique for small and medium enterprises

Keikinzoku/Journal of Japan Institute of Light Metals
2007 | Journal article
DOI: 10.2464/jilm.57.549
EID:

2-s2.0-38149008193
Contributors: Tanaka, T.; Oki, S.; Taniguchi, M.; Shimonishi, I.; Nakata, H.; Higashi, K.
Source: Self-asserted source
Tsutomu Tanaka via Scopus - Elsevier

Influence of friction stir welding parameters on grain size and formability in 5083 aluminum alloy

Materials Science and Engineering A
2007 | Journal article
DOI: 10.1016/j.msea.2006.12.079
EID:

2-s2.0-33947407703
Contributors: Hirata, T.; Oguri, T.; Hagino, H.; Tanaka, T.; Chung, S.W.; Takigawa, Y.; Higashi, K.
Source: Self-asserted source
Tsutomu Tanaka via Scopus - Elsevier

Relationship between deformation behavior and microstructural evolution of friction stir processed Zn-22 wt.% Al alloy

Scripta Materialia
2007 | Journal article
DOI: 10.1016/j.scriptamat.2006.11.022
EID:

2-s2.0-33846230455
Contributors: Hirata, T.; Tanaka, T.; Chung, S.W.; Takigawa, Y.; Higashi, K.
Source: Self-asserted source
Tsutomu Tanaka via Scopus - Elsevier

Low cycle fatigue behavior of Zn-22mass%Al alloy exhibiting high-strain-rate superplasticity at room temperature

Scripta Materialia
2005 | Journal article
DOI: 10.1016/j.scriptamat.2004.09.023
EID:

2-s2.0-9744241096
Contributors: Tanaka, T.; Kohzu, M.; Takigawa, Y.; Higashi, K.
Source: Self-asserted source
Tsutomu Tanaka via Scopus - Elsevier

On applying superplastic Zn-22 wt.% Al alloy with nanocrystalline grains to general residential seismic dampers

Materials Science and Engineering A
2005 | Journal article
DOI: 10.1016/j.msea.2005.08.115
EID:

2-s2.0-28944449725
Contributors: Tanaka, T.; Chung, S.W.; Chaing, L.-F.; Makii, K.; Kushibe, A.; Kohzu, M.; Higashi, K.
Source: Self-asserted source
Tsutomu Tanaka via Scopus - Elsevier

Cavitation behavior in superplastically deformed Zn-22mass%Al alloy at room temperature

Materials Transactions
2004 | Journal article
DOI: 10.2320/matertrans.45.2547
EID:

2-s2.0-6444237196
Contributors: Tanaka, T.; Higashi, K.
Source: Self-asserted source
Tsutomu Tanaka via Scopus - Elsevier

Diffusion bonding in ultra fine-grained Al-Fe alloy indicating high-strain-rate superplasticity

Acta Materialia
2004 | Journal article
DOI: 10.1016/j.actamat.2003.10.036
EID:

2-s2.0-0742324876
Contributors: Somekawa, H.; Tanaka, T.; Sasaki, H.; Kita, K.; Inoue, A.; Higashi, K.
Source: Self-asserted source
Tsutomu Tanaka via Scopus - Elsevier

Microstructure and superplastic properties at room temperature in Zn-22Al alloy after equal-channel-angular extrusion

Materials Science Forum
2004 | Book
EID:

2-s2.0-3142672978
Contributors: Tanaka, T.; Watanabe, H.; Kohzu, M.; Higashi, K.
Source: Self-asserted source
Tsutomu Tanaka via Scopus - Elsevier

Post-characteristics of formed Zn-22mass%Al alloy to seismic damper for general residence

Materials Transactions
2004 | Journal article
DOI: 10.2320/matertrans.45.2542
EID:

2-s2.0-6444237197
Contributors: Tanaka, T.; Chung, S.W.; Chaing, L.-F.; Makii, K.; Kushibe, A.; Kohzu, M.; Higashi, K.
Source: Self-asserted source
Tsutomu Tanaka via Scopus - Elsevier

Post-mechanical properties of superplastically-forged Zn-22wt%Al alloy

Key Engineering Materials
2004 | Book
EID:

2-s2.0-33646257550
Contributors: Tanaka, T.; Chung, S.W.; Chaing, L.-F.; Makii, K.; Kushibe, A.; Kohzu, M.; Higashi, K.
Source: Self-asserted source
Tsutomu Tanaka via Scopus - Elsevier

Superplasticity at room temperature in Zn-22Al alloy processed by equal-channel-angular extrusion

Materials Transactions
2004 | Journal article
DOI: 10.2320/matertrans.45.1261
EID:

2-s2.0-2942754152
Contributors: Tanaka, T.; Higashi, K.
Source: Self-asserted source
Tsutomu Tanaka via Scopus - Elsevier

Capability of superplastic forming in the seismic device using Zn-22Al eutectoid alloy

Scripta Materialia
2003 | Journal article
DOI: 10.1016/S1359-6462(03)00328-2
EID:

2-s2.0-0038409837
Contributors: Tanaka, T.; Makii, K.; Kushide, A.; Kohzu, M.; Higashi, K.
Source: Self-asserted source
Tsutomu Tanaka via Scopus - Elsevier

Microstructure in Zn-Al Alloys after Equal-Channel-Angular Extrusion

Materials Transactions
2003 | Journal article
DOI: 10.2320/matertrans.44.1891
EID:

2-s2.0-0242413080
Contributors: Tanaka, T.; Watanabe, H.; Higashi, K.
Source: Self-asserted source
Tsutomu Tanaka via Scopus - Elsevier

Study on practical application of a new seismic damper using a Zn-Al alloy with a nanocrystalline microstructure

International Journal of Mechanical Sciences
2003 | Journal article
DOI: 10.1016/j.ijmecsci.2003.12.001
EID:

2-s2.0-1342347361
Contributors: Tanaka, T.; Makii, K.; Ueda, H.; Kushibe, A.; Kohzu, M.; Higashi, K.
Source: Self-asserted source
Tsutomu Tanaka via Scopus - Elsevier

Room temperature deformation behavior of Zn-22 mass% Al alloy with nanocrystalline structure

Materials Transactions
2002 | Journal article
DOI: 10.2320/matertrans.43.2449
EID:

2-s2.0-0036819120
Contributors: Tanaka, T.; Makii, K.; Kushibe, A.; Higashi, K.
Source: Self-asserted source
Tsutomu Tanaka via Scopus - Elsevier
How many people are using ORCID?