Personal information

Other IDs

Scopus Author ID: 7102054991
ResearcherID: C-8548-2018
SciProfiles: 1055949

Activities

Collapse all

Professional activities (1)

Universidad de Las Palmas de Gran Canaria Biblioteca Universitaria: Las Palmas de Gran Canaria, Las Palmas, ES

Membership
Source: Self-asserted source
Luis Suárez

Works (43)

Recyclability Assessment of Lignocellulosic Fiber Composites: Reprocessing of Giant Reed/HDPE Composites by Compression Molding

2024 | Book chapter
DOI: 10.1007/978-3-031-56474-1_15
Contributors: Luis Suárez; Aoife Ní Mhuirí; Bronagh Millar; Mark McCourt; Eoin Cunningham; Zaida Ortega
Source: check_circle
Crossref

Influence of Giant Reed ( Arundo Donax L .) Culms Processing Procedure on Physicochemical, Rheological, and Thermomechanical Properties of Polyethylene Composites

Journal of Natural Fibers
2024-12-31 | Journal article
DOI: 10.1080/15440478.2023.2296909
Contributors: Luis Suárez; Paul R. Hanna; Zaida Ortega; Mateusz Barczewski; Paulina Kosmela; Bronagh Millar; Eoin Cunningham
Source: check_circle
Crossref

Characterization of Microalgae Biomass-Based Composites Obtained through Rotational Molding

Polymers
2024-06-26 | Journal article
DOI: 10.3390/polym16131807
Contributors: Sara Díaz; Francisco Romero; Luis Suárez; Raúl Ríos; Monserrat Alemán; Marianna Venuleo; Zaida Ortega
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

A review of the use of giant reed (Arundo donax L.) in the biorefineries context

Reviews in Chemical Engineering
2024-04-25 | Journal article
DOI: 10.1515/revce-2022-0069
Contributors: Zaida Ortega; Ife Bolaji; Luis Suárez; Eoin Cunningham
Source: check_circle
Crossref

Use of Pressure in Rotational Molding to Reduce Cycle Times: Comparison of the Thermomechanical Behavior of Rotomolded Reed/Polyethylene Composites

Journal of Composites Science
2024-01-04 | Journal article
DOI: 10.3390/jcs8010017
Contributors: Zaida Ortega; Luis Suárez; Jake Kelly-Walley; Paul R. Hanna; Mark McCourt; Bronagh Millar
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Use of Ricinus communis shredded material as filler in rotational molded parts to improve the bio-disintegration behavior

Polymer Bulletin
2023-10 | Journal article
DOI: 10.1007/s00289-022-04593-5
Contributors: Francisco Romero; Zaida Ortega; Jessica Castellano; Antonio N. Benítez; María Dolores Marrero; Luis Suárez
Source: check_circle
Crossref

Mechanical Performance of Rotationally Molded Multilayer mLDPE/Banana-Fiber Composites

Materials
2023-10-18 | Journal article
DOI: 10.3390/ma16206749
Contributors: Jake Kelly-Walley; Zaida Ortega; Mark McCourt; Bronagh Millar; Luis Suárez; Peter Martin
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

A New Image Analysis Assisted Semi-Automatic Geometrical Measurement of Fibers in Thermoplastic Composites: A Case Study on Giant Reed Fibers

Journal of Composites Science
2023-08-09 | Journal article
DOI: 10.3390/jcs7080326
Contributors: Luis Suárez; Mark Billham; Graham Garrett; Eoin Cunningham; María Dolores Marrero; Zaida Ortega
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Characterization of PLA Sheets Prepared by Stretching under Different Conditions: Influence of Reprocessing and Establishing Optimal Conditions

Materials
2023-07-20 | Journal article
DOI: 10.3390/ma16145114
Contributors: Zaida Ortega; Paula Douglas; Paul R. Hanna; Graham Garrett; Alan Clarke; Eoin Cunningham; Luis Suárez
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Use of giant reed (Arundo donax L.) for polymer composites obtaining: a mapping review

Cellulose
2023-05 | Journal article
DOI: 10.1007/s10570-023-05176-x
Contributors: Luis Suárez; Zaida Ortega; Mateusz Barczewski; Eoin Cunningham
Source: check_circle
Crossref

Giant Reed ( Arundo donax L.) Fiber Extraction and Characterization for Its Use in Polymer Composites

Journal of Natural Fibers
2023-04-24 | Journal article
DOI: 10.1080/15440478.2022.2131687
Contributors: Luis Suárez; Mateusz Barczewski; Paulina Kosmela; María D. Marrero; Zaida Ortega
Source: check_circle
Crossref

Recent Developments in Inorganic Composites in Rotational Molding

Polymers
2022-12-02 | Journal article
DOI: 10.3390/polym14235260
Contributors: Zaida Ortega; Mark McCourt; Francisco Romero; Luis Suárez; Eoin Cunningham
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Influence of Giant Reed Fibers on Mechanical, Thermal, and Disintegration Behavior of Rotomolded PLA and PE Composites

Journal of Polymers and the Environment
2022-11 | Journal article
DOI: 10.1007/s10924-022-02542-x
Contributors: Luis Suárez; Zaida Ortega; Francisco Romero; Rubén Paz; María D. Marrero
Source: check_circle
Crossref

Are Natural-Based Composites Sustainable?

Polymers
2021-07-15 | Journal article
DOI: 10.3390/polym13142326
Contributors: Luis Suárez; Jessica Castellano; Sara Díaz; Abbas Tcharkhtchi; Zaida Ortega
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Valorization of Invasive Plants from Macaronesia as Filler Materials in the Production of Natural Fiber Composites by Rotational Molding

Polymers
2021-07-05 | Journal article
DOI: 10.3390/polym13132220
Contributors: Zaida Ortega; Francisco Romero; Rubén Paz; Luis Suárez; Antonio Nizardo Benítez; María Dolores Marrero
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Environmental Hazards of Giant Reed (Arundo donax L.) in the Macaronesia Region and Its Characterisation as a Potential Source for the Production of Natural Fibre Composites

Polymers
2021-06-25 | Journal article
DOI: 10.3390/polym13132101
Contributors: Luis Suárez; Jessica Castellano; Francisco Romero; María Dolores Marrero; Antonio Nizardo Benítez; Zaida Ortega
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Mechanical and fire characterization of composite material made of polyethylene matrix and dry chemical powder obtained from end‐of‐life extinguishers

Fire and Materials
2021-03 | Journal article
DOI: 10.1002/fam.2926
Contributors: Zaida Ortega; Rubén Paz; Alba Montejo; Luis Suárez
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Sistemas de unión de piezas producidas por modelado por deposición de material fundido

DYNA INGENIERIA E INDUSTRIA
2021-01 | Journal article
DOI: 10.6036/9569
Part of ISSN: 1989-1490
Source: Self-asserted source
Luis Suárez

Open Education through Interactive Training Material

Sustainability
2020-09-16 | Journal article
DOI: 10.3390/su12187645
Contributors: Pedro Manuel Hernández-Castellano; María Dolores Martínez-Rivero; María Dolores Marrero-Alemán; Luis Suárez-García; Alejandro Gutiérrez-Barcenilla
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Assessment on the use of additive manufacturing technologies for acoustic applications

The International Journal of Advanced Manufacturing Technology
2020-08-05 | Journal article
DOI: 10.1007/s00170-020-05853-2
Contributors: Luis Suárez; María del Mar Espinosa
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Diseño sostenible en impresión 3D: estado del arte

DYNA INGENIERIA E INDUSTRIA
2020-07 | Journal article
DOI: 10.6036/9447
Part of ISSN: 1989-1490
Source: Self-asserted source
Luis Suárez
grade
Preferred source (of 2)‎

Dispositivo de medición de bajo coste para la determinación de propiedades de aislamiento acústico

Revista de Acústica
2020-04 | Journal article
Part of ISSN: 2254-2396
Source: Self-asserted source
Luis Suárez

Sustainability and environmental impact of fused deposition modelling (FDM) technologies

The International Journal of Advanced Manufacturing Technology
2020-01-10 | Journal article
DOI: 10.1007/s00170-019-04676-0
Contributors: Luis Suárez; Manuel Domínguez
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Adaptive Learning Using Interactive Training Material

Innovative Trends in Flipped Teaching and Adaptive Learning
2019 | Book chapter
DOI: 10.4018/978-1-5225-8142-0.ch008
Part of ISBN: 9781522581420
Part of ISBN: 9781522581437
Part of ISSN: 2326-8905
Part of ISSN: 2326-8913
Source: Self-asserted source
Luis Suárez

Manufacturing Process Selection Integrated in the Design Process: Test and Results

Procedia Manufacturing
2019 | Journal article
DOI: 10.1016/j.promfg.2019.09.075
Part of ISSN: 2351-9789
Source: Self-asserted source
Luis Suárez
grade
Preferred source (of 2)‎

Manufacturing Process Selection Integrated in the Design Process: University and Industry

Procedia Manufacturing
2019 | Journal article
DOI: 10.1016/j.promfg.2019.10.036
Part of ISSN: 2351-9789
Source: Self-asserted source
Luis Suárez
grade
Preferred source (of 2)‎

Fabricación Aditiva: material didáctico interactivo

Aprendizaje, Innovación y Cooperación como impulsores del cambio metodológico
2019-10 | Conference paper
DOI: 10.26754/cinaic.2019.0057
Source: Self-asserted source
Luis Suárez

Characterization of Agave americana L. plant as potential source of fibres for composites obtaining

SN Applied Sciences
2019-09 | Journal article
DOI: 10.1007/s42452-019-1022-2
Part of ISSN: 2523-3963
Part of ISSN: 2523-3971
Source: Self-asserted source
Luis Suárez

Experimental Analysis and Simulation of Novel Technical Textile Reinforced Composite of Banana Fibre

Materials
2019-04 | Journal article | Author
DOI: 10.3390/ma12071134
Contributors: Mario D. Monzón; Rubén Paz; Martí Verdaguer; Luis Suárez; P. Badalló; Zaida Ortega; Noelia Diaz
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎

Adaptive Learning Using Interactive Training Material

2019-01-01 | Book chapter | Author
SOURCE-WORK-ID: 91521
HANDLE: 10553/114213
Contributors: Pedro Manuel Hernández Castellano; María Dolores Marrero Alemán; Rubén Paz; Pablo Rubén Bordón Pérez ; Luis Suárez; Antonio Nizardo Benítez Vega
Source: check_circle
accedaCRIS

Material didáctico sobre la Selección de Procesos de Fabricación: experiencia en el curso 2018/19

2019-01-01 | Other | Author
SOURCE-WORK-ID: 33621
HANDLE: 10553/58072
Contributors: Martínez-Rivero, María Dolores; Pedro Manuel Hernández Castellano; Luis Suárez; Alemán Calcines, Natalia; María Dolores Marrero Alemán
Source: check_circle
accedaCRIS

Interactive training material about additive manufacturing technologies

2018-01-01 | Other | Author
SOURCE-WORK-ID: 13171
HANDLE: 10553/41442
Contributors: Pedro Manuel Hernández Castellano; Gutierrez-Barcenilla, Alejandro; Martínez-Rivero, María Dolores; María Dolores Marrero Alemán; Rubén Paz; Antonio Nizardo Benítez Vega; Luis Suárez
Source: check_circle
accedaCRIS

Tecnologías de fabricación aditiva

2018-01-01 | Book | Author
SOURCE-WORK-ID: 24616
HANDLE: 10553/52521
Contributors: Pedro Manuel Hernández Castellano; Gutiérrez Barcenilla, Alejandro; Martínez Rivero, María Dolores; María Dolores Marrero Alemán; Rubén Paz; Luis Suárez; Ortega García,Fernando
Source: check_circle
accedaCRIS

4D printing: processability and measurement of recovery force in shape memory polymers

International Journal of Advanced Manufacturing Technology
2017 | Journal article
DOI: 10.1007/s00170-016-9233-9
EID:

2-s2.0-84982803668
Contributors: Monzón, M.D.; Paz, R.; Pei, E.; Ortega, F.; Suárez, L.A.; Ortega, Z.; Alemán, M.E.; Plucinski, T.; Clow, N.
Source: Self-asserted source
Luis Suárez via Scopus - Elsevier

Banana fiber processing for the production of technical textiles to reinforce polymeric matrices

Smart Innovation, Systems and Technologies
2017 | Conference paper
DOI: 10.1007/978-3-319-57078-5_43
EID:

2-s2.0-85018438805
Source: Self-asserted source
Luis Suárez
grade
Preferred source (of 2)‎

Lightweight parametric design optimization for 4D printed parts

Integrated Computer-Aided Engineering
2017 | Journal article
DOI: 10.3233/ICA-170543
EID:

2-s2.0-85022213958
Contributors: Paz, R.; Pei, E.; Monzón, M.; Ortega, F.; Suárez, L.
Source: Self-asserted source
Luis Suárez via Scopus - Elsevier

Impacto de la introducción de un material didáctico interactivo en los resultados de aprendizaje en asignaturas de grado de ingenierías - [Impact of the introduction of an interactive didactic material on the learning results of subjects in engineering degrees]

La innovación docente como misión del profesorado : Congreso Internacional Sobre Aprendizaje, Innovación y Competitividad
2017-10 | Conference paper
DOI: 10.26754/cinaic.2017.000001_025
ISBN: 9788416723416
Source: Self-asserted source
Luis Suárez

Designing the Future: Lightweight Optimisation of 4D Printed Parts

2016-01-01 | Other | Author
SOURCE-WORK-ID: 91527
HANDLE: 10553/114215
Contributors: Pei, Eujin; Rubén Paz; Mario D. Monzón; Ortega García,Fernando; Luis Suárez
Source: check_circle
accedaCRIS

Interactive Learning Tool in Product Development for Injection Moulding

Procedia Engineering
2015 | Conference paper
DOI: 10.1016/j.proeng.2015.12.470
EID:

2-s2.0-84962890438
Contributors: Hernández, P.; Taboada, S.; Suárez, L.; Marrero, M.D.; Ortega, F.; Benítez, A.
Source: Self-asserted source
Luis Suárez via Scopus - Elsevier

Rotational molding applied to the manufacturing of blades of small wind turbine

ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2014
2014 | Conference paper
DOI: 10.1115/ESDA2014-20539
EID:

2-s2.0-84916887069
Contributors: Marrero, M.D.; Hernández, P.; Suárez, L.; Pestana, D.; Benítez, A.; Martín, J.; Rivero, S.; Calero, E.
Source: Self-asserted source
Luis Suárez via Scopus - Elsevier

Method and machine for obtaining fiber from leaves

2014-10 | Patent
PAT:

WO/2014/174115
Source: Self-asserted source
Luis Suárez

Procedimiento y máquina para la obtención de fibra a partir de hojas

2014-10 | Patent
PAT:

ES 2514215 B1
Source: Self-asserted source
Luis Suárez

Use of banana fiber in injection - Moulded parts for the automotive sector

ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials
2012 | Conference paper
EID:

2-s2.0-84904016045
Contributors: Ortega, Z.; Monzón, M.D.; Soto, P.; Guinea, I.; Suárez, L.; Hernández, P.M.
Source: Self-asserted source
Luis Suárez via Scopus - Elsevier

Peer review (2 reviews for 1 publication/grant)

Review activity for Industrial crops and products. (2)
How many people are using ORCID?