Personal information

Activities

Works (39)

Comparison of Wear Resistance of Overlay Welded Layers and Thermal Sprayed Coatings in Real Conditions

Materials
2023-11-17 | Journal article
Contributors: Michał Szymura; Grzegorz Gąsiorek; Artur Czupryński; Waldemar Kwaśny; Viktor Kvasnytskyi
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Morphology, Phase and Chemical Analysis of Leachate after Bioleaching Metals from Printed Circuit Boards

Materials
2022-06-21 | Journal article
Contributors: Kamila Hyra; Paweł M. Nuckowski; Joanna Willner; Tomasz Suponik; Dawid Franke; Mirosława Pawlyta; Krzysztof Matus; Waldemar Kwaśny
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Identification of oxidation process of TiALN coatings versus heat resistant aerospace alloys based on diffusion couples and tool wear tests

CIRP Annals
2020-05 | Journal article
Part of ISSN: 0007-8506
Source: Self-asserted source
Waldemar Kwasny
grade
Preferred source (of 2)‎

Influence of Solidification Conditions on the Microstructure of Laser-Surface-Melted Ductile Cast Iron

Materials
2020-03 | Journal article | Author
Contributors: Damian Janicki; Jacek Górka; Waldemar Kwasny; Wojciech Pakieła; Krzysztof Matus
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 3)‎

Comparison of mathematical models with fractional derivative for the heat conduction inverse problem based on the measurements of temperature in porous aluminum

International Journal of Heat and Mass Transfer
2019 | Journal article
EID:

2-s2.0-85070694107

Contributors: Brociek, R.; Słota, D.; Król, M.; Matula, G.; Kwaśny, W.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

Numerical analysis of static tensile test of the sample made of polyethylene reinforced by halloysite nanoparticles

Acta Physica Polonica A
2019 | Journal article
EID:

2-s2.0-85077461673

Part of ISBN:

1898794X 05874246

Contributors: Śliwa, A.; Kwaśny, W.; Nabiałek, M.; Dziwis, R.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

Application of an Ant Colony Optimization Algorithm in Modeling the Heat Transfer in Porous Aluminum

Communications in Computer and Information Science
2018 | Book
EID:

2-s2.0-85053635094

Contributors: Brociek, R.; Słota, D.; Król, M.; Matula, G.; Kwaśny, W.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

Changes in structure of CuCr0.6 alloy after repetitive corrugation process

Archives of Metallurgy and Materials
2017 | Journal article
EID:

2-s2.0-85040366128

Contributors: Jung, T.; Kwaśny, W.; Rdzawski, Z.; Głuchowski, W.; Matus, K.; Pawlyta, M.; Szindler, M.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

Charasteristics of TiCN coating deposited by cathodic arc evaporation

Journal of Achievements in Materials and Manufacturing Engineering
2017 | Journal article
EID:

2-s2.0-85044172753

Contributors: Lukaszkowicz, K.; Paradecka, A.; Kwaśny, W.; Potempa, R.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

Computer simulation of the aluminium extrusion process

Metalurgija
2017 | Journal article
EID:

2-s2.0-85019227835

Contributors: Śliwa, A.; Kwaśny, W.; Sroka, M.; Dziwis, R.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

Diode Laser Surface Alloying of Armor Steel with Tungsten Carbide

Archives of Metallurgy and Materials
2017 | Journal article
EID:

2-s2.0-85026780243

Contributors: Janicki, D.; Górka, J.; Kwaśny, W.; Gołombek, K.; Kondracki, M.; Zuk, M.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

Computer Simulation of the relationship between selected properties of PVD coatings

Archives of Metallurgy and Materials
2016 | Journal article
EID:

2-s2.0-84975106335

Contributors: Śliwa, A.; Kwaśny, W.; Sitek, W.; Bonek, M.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

Diode laser cladding of Co-based composite coatings reinforced by spherical WC particles

Proceedings of SPIE - The International Society for Optical Engineering
2016 | Conference paper
EID:

2-s2.0-85008343710

Contributors: Janicki, D.; Górka, J.; Czupryński, A.; Kwaśny, W.; Zuk, M.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

Finite element prediction for the internal stresses of (Ti,Al)N coatings

Archives of Metallurgy and Materials
2016 | Journal article
EID:

2-s2.0-84960497304

Contributors: Zukowska, L.W.; Śliwa, A.; Mikuła, J.; Bonek, M.; Kwas̈ny, W.; Sroka, M.; Pakuła, D.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

Prediction of the properties of PVD/CVD coatings with the use of FEM analysis

Applied Surface Science
2016 | Journal article
EID:

2-s2.0-84955247709

Contributors: Śliwa, A.; Mikuła, J.; Gołombek, K.; Tański, T.; Kwaśny, W.; Bonek, M.; Brytan, Z.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

Microstructure-property relationships in TRIP aided medium-C bainitic steel with lamellar retained austenite

Materials Science and Technology (United Kingdom)
2015 | Journal article
EID:

2-s2.0-84938824682

Contributors: Grajcar, A.; Kwas̈ny, W.; Zalecki, W.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

Komputerowa symulacja wpływu międzywarstwy Ti na właściwości powłok

INŻYNIERIA MATERIAŁOWA
2015-04-05 | Journal article
Part of ISSN: 0208-6247
Contributors: Waldemar Kwaśny
Source: Self-asserted source
Waldemar Kwasny via Crossref Metadata Search

The effect of PVD and CVD coating structures on the durability of sintered cutting edges

Archives of Metallurgy and Materials
2014 | Journal article
EID:

2-s2.0-84898665718

Contributors: Staszuk, M.; Dobrzański, L.A.; Tański, T.; Kwaśny, W.; Musztyfaga-Staszuk, M.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

Influence of RCS process on the structure and mechanical properties of CuSn6 alloy

Archives of Materials Science and Engineering
2013 | Journal article
EID:

2-s2.0-84884754478

Contributors: Kwaśny, W.; Nuckowski, P.; Rdzawski, Z.; Głuchowski, W.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

Properties determination of two-layer coatings deposited by PVD techniques using computer simulation

Archives of Materials Science and Engineering
2013 | Journal article
EID:

2-s2.0-84894046222

Contributors: Śliwa, A.; Kwaśny, W.; Dobrzański, L.A.; Dziwis, R.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

Simulation of internal stresses coatings deposited onto magnesium alloys by use of FEM

Archives of Materials Science and Engineering
2013 | Journal article
EID:

2-s2.0-84897786953

Contributors: Śliwa, A.; Tański, T.; Dziwis, R.; Kwaśny, W.; Pancielejko, M.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

Fractal and multifractal characteristics of the PVD and CVD coatings deposited onto compound tool ceramics

Archives of Materials Science and Engineering
2012 | Journal article
EID:

2-s2.0-84866541102

Contributors: Kwaśny, W.; Mikuła, J.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

Structure and mechanical properties of PVD coatings deposited onto the X40CrMoV5-1 hot work tool steel substrate

Vacuum
2012 | Journal article
EID:

2-s2.0-84858157346

Contributors: Lukaszkowicz, K.; Czyzniewski, A.; Kwaśny, W.; Pancielejko, M.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

The computer simulation of internal stresses of tool gradient materials reinforced with the WC-Co

Archives of Materials Science and Engineering
2012 | Journal article
EID:

2-s2.0-84866548371

Contributors: Dobrzański, L.A.; Kwaśny, W.; Dołzańska, B.; Śliwa, A.; Gołombek, K.; Nowak, G.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

Development of ordered structures in the high-temperature (HT) cokes from binary and ternary coal blends studied by means of x-ray diffraction and Raman spectroscopy

Energy and Fuels
2011 | Journal article
EID:

2-s2.0-79960612565

Contributors: Smȩdowski, L.; Krzesińska, M.; Kwaśny, W.; Kozanecki, M.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

Synthesis and characterization of carbon nanotubes decoratedrwith gold nanoparticles

Acta Physica Polonica A
2010 | Journal article
EID:

2-s2.0-77956576341

Contributors: Dobrzanski, L.A.; Pawlyta, M.; Krzton, A.; LlSZKA, B.; Tai, C.W.; Kwasny, W.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

Ti(C,N) and (ti,Al)N hard wear resistant coatings

Archives of Materials Science and Engineering
2010 | Journal article
EID:

2-s2.0-77953999850

Contributors: Dobrzański, L.A.; Zukowska, L.W.; Kwaśny, W.; Mikuła, J.; Gołombek, K.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

Structure changes and mechanical properties of laser alloyed magnesium cast alloys

Archives of Materials Science and Engineering
2009 | Journal article
EID:

2-s2.0-77952487472

Contributors: Dobrzański, L.A.; Domagała, J.; Malara, S.; Tański, T.; Kwaśny, W.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

Structure of TiBN coatings deposited onto cemented carbides and sialon tool ceramics

Archives of Materials Science and Engineering
2009 | Journal article
EID:

2-s2.0-77952467300

Contributors: Dobrzański, L.A.; Staszuk, M.; Konieczny, J.; Kwaśny, W.; Pawlyta, M.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

Structure, physical properties and multifractal characteristics of the PVD and CVD coatings deposition onto the Al<inf>2</inf>O<inf>3</inf>+TiC ceramics

International Journal of Computational Materials Science and Surface Engineering
2007 | Journal article
EID:

2-s2.0-84948647462

Contributors: Kwaśny, W.; Wožniak, M.J.; Mikuła, J.; Dobrzaήski, L.A.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

The computer simulation of critical compressive stresses on the PVD coatings

International Journal of Computational Materials Science and Surface Engineering
2007 | Journal article
EID:

2-s2.0-84948645001

Contributors: Dobrzański, L.A.; Śliwa, A.; Sitek, W.; Kwaśny, W.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

Multifractal characteristic of surface topography of the coatings on cemented carbides

"Proceedings - 15th IFHTSE - International Federation for Heat Treatment and Surface Engineering Congress 2006"
2006 | Conference paper
EID:

2-s2.0-52349111624

Contributors: Kwaśny, W.; Gołombek, K.; Dobrzański, L.A.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

Employment of the finite element method for determining stresses in coatings obtained on high-speed steel with the PVD process

Journal of Materials Processing Technology
2005 | Journal article
EID:

2-s2.0-17844396672

Contributors: Dobrzański, L.A.; Śliwa, A.; Kwaśny, W.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

Structure, physical properties and fractal character of surface topography of the Ti + TiC coatings on sintered high speed steel

Journal of Materials Processing Technology
2005 | Journal article
EID:

2-s2.0-17844386843

Contributors: Kwaśny, W.; Dobrzański, L.A.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

(Cr, Me)N coatings deposited in a vacuum furnace by magnetron sputtering of a ferrochromium alloy

Journal of Materials Processing Technology
2004 | Journal article
EID:

2-s2.0-10444241892

Contributors: Shishkov, R.; Dermendjiev, I.; Peev, M.; Kwaśny, W.; Križ, A.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

Fractal nature of surface topography and physical properties of the coatings obtained using magnetron sputtering

Journal of Materials Processing Technology
2004 | Journal article
EID:

2-s2.0-10444251063

Contributors: Kwaśny, W.; Dobrzański, L.A.; Pawlyta, M.; Gulbiński, W.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

Structure and properties of the Ti + Ti(C,N) coatings obtained in the PVD process on sintered high speed steel

Journal of Materials Processing Technology
2004 | Journal article
EID:

2-s2.0-10444232754

Contributors: Dobrzański, L.A.; Kwaśny, W.; Brytan, Z.; Shishkov, R.; Tomov, B.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

Structure and properties of X150CrMo12 steel after PVDM-R by magnetron deposition of chromium nitride coatings with next heat treatment

Journal of Materials Processing Technology
2004 | Journal article
EID:

2-s2.0-10444268248

Contributors: Shishkov, R.; Jordanov, M.; Kwaśny, W.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier

Ti + TiN, Ti + Ti(C<inf>x</inf>N<inf>1-x</inf>), Ti + TiC PVD coatings on the ASP 30 sintered high-speed steel

Journal of Materials Processing Technology
2004 | Journal article
EID:

2-s2.0-10444275285

Contributors: Kwaśny, W.; Dobrzański, L.A.; Bugliosi, S.
Source: Self-asserted source
Waldemar Kwasny via Scopus - Elsevier