Personal information

Activities

Employment (1)

Sharif University of Technology: Tehran, Tehran, IR

2012-09-22 to present | Associate Professor (Department of Materials Science and Engineering)
Employment
Source: Self-asserted source
Mojtaba Movahedi

Education and qualifications (3)

Sharif University of Technology: Tehran, Tehran, IR

2006-09-22 to 2012-09-22 | PhD (Department of Materials Science and Engineering)
Education
Source: Self-asserted source
Mojtaba Movahedi

Sharif University of Technology: Tehran, Tehran, IR

2004-09-22 to 2006-09-22 | MSc (Department of Materials Science and Engineering)
Education
Source: Self-asserted source
Mojtaba Movahedi

Sharif University of Technology: Tehran, Tehran, IR

2000-09-22 to 2004-09-22 | BSc (Department of Materials Science and Engineering)
Education
Source: Self-asserted source
Mojtaba Movahedi

Works (42)

The Role of HAZ Softening on Cross-Tension Mechanical Performance of Martensitic Advanced High Strength Steel Resistance Spot Welds

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2021 | Journal article
EID:

2-s2.0-85098729662

Part of ISSN: 10735623
Contributors: Tamizi, M.; Pouranvari, M.; Movahedi, M.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Effect of liquation on the tensile properties of cast Mg–9Al–1Zn Alloy fusion welds

Science and Technology of Welding and Joining
2020 | Journal article
EID:

2-s2.0-85089459349

Part of ISSN: 17432936 13621718
Contributors: Pouranvari, M.; Sharahi, H.J.; Movahedi, M.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Enhanced resistance to liquation cracking during fusion welding of cast magnesium alloys: Microstructure tailoring via friction stir processing pre-weld treatment

Materials Science and Engineering A
2020 | Journal article
EID:

2-s2.0-85089802137

Part of ISSN: 09215093
Contributors: Sharahi, H.J.; Pouranvari, M.; Movahedi, M.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Resistance Spot Welding of Aluminum to Aluminum Clad Steel Sheet: Experimental and Theoretical Analysis

Journal of Manufacturing Processes
2020 | Journal article
EID:

2-s2.0-85089689727

Part of ISSN: 15266125
Contributors: Rahimi, S.; Movahedi, M.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Strengthening and ductilization mechanisms of friction stir processed cast Mg–Al–Zn alloy

Materials Science and Engineering A
2020 | Journal article
EID:

2-s2.0-85082122935

Part of ISSN: 09215093
Contributors: Sharahi, H.J.; Pouranvari, M.; Movahedi, M.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

An alternative additive manufacturing-based joining method to make Metal/Polymer hybrid structures

Journal of Manufacturing Processes
2019 | Journal article
EID:

2-s2.0-85068539861

Part of ISSN: 15266125
Contributors: Ozlati, A.; Movahedi, M.; Tamizi, M.; Tartifzadeh, Z.; Alipour, S.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Effect of graphene and process parameters on mechanical performance and electrical resistance of aluminum to copper friction stir joint

Materials Research Express
2019 | Journal article
EID:

2-s2.0-85062169793

Part of ISSN: 20531591
Contributors: Montazerian, M.H.; Movahedi, M.; Jondi, M.R.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Effect of solid fraction, grain misorientation and grain boundary energy on solidification cracking in weld of Al-Cu aluminum alloys

Materials Research Express
2019 | Journal article
EID:

2-s2.0-85069605917

Part of ISSN: 20531591
Contributors: Bodaghi, F.; Movahedi, M.; Kokabi, A.H.; Tavakoli, R.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Gas tungsten arc lap welding of aluminum/steel hybrid structures

Marine Structures
2019 | Journal article
EID:

2-s2.0-85057451601

Part of ISSN: 09518339
Contributors: Hasanniah, A.; Movahedi, M.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Microstructural Evaluation and Mechanical Properties of Al1050/TiO <inf>2</inf> -Graphite Hybrid Nanocomposite Produced Via Friction Stir Processing

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2019 | Journal article
EID:

2-s2.0-85062637552

Part of ISSN: 10735623
Contributors: Farshbaf Ahmadipour, M.; Movahedi, M.; Kokabi, A.H.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Pathways to improve the austenite–ferrite phase balance during resistance spot welding of duplex stainless steels

Science and Technology of Welding and Joining
2019 | Journal article
EID:

2-s2.0-85046446376

Contributors: Arabi, S.H.; Pouranvari, M.; Movahedi, M.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Properties–microstructure relationship in Al–Fe in situ composite produced by friction stir processing

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
2019 | Journal article
EID:

2-s2.0-85059620509

Part of ISSN: 20413076 14644207
Contributors: Najafi, A.; Movahedi, M.; Yarandi, A.S.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Effect of interlayers on softening of aluminum friction stir welds

Materials Science and Engineering A
2018 | Journal article
EID:

2-s2.0-85046669694

Contributors: Mokabberi, S.R.; Movahedi, M.; Kokabi, A.H.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Effect of welding heat-input on tensile strength and fracture location in upset resistance weld of martensitic stainless steel to duplex stainless steel rods

Journal of Manufacturing Processes
2018 | Journal article
EID:

2-s2.0-85053202241

Part of ISSN: 15266125
Contributors: Ozlati, A.; Movahedi, M.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Ultrahigh-strength friction stir spot welds of aluminium alloy obtained by Fe<inf>3</inf>O<inf>4</inf> nanoparticles

Science and Technology of Welding and Joining
2018 | Journal article
EID:

2-s2.0-85026207154

Contributors: Fereiduni, E.; Movahedi, M.; Baghdadchi, A.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Upset-resistance welding of aluminium to copper rods: effect of interface on performance

Materials Science and Technology (United Kingdom)
2018 | Journal article
EID:

2-s2.0-85048180033

Contributors: Shamsian, M.; Movahedi, M.; Kokabi, A.H.; Ozlati, A.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Welding of Al-Mg aluminum alloy to aluminum clad steel sheet using pulsed gas tungsten arc process

Journal of Manufacturing Processes
2018 | Journal article
EID:

2-s2.0-85038862956

Contributors: Hasanniah, A.; Movahedi, M.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

A new refill friction spot welding process for aluminum/polymer composite hybrid structures

Composite Structures
2017 | Journal article
EID:

2-s2.0-85018787149

Contributors: Karami Pabandi, H.; Movahedi, M.; Kokabi, A.H.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Effect of Dwell Time on Joint Interface Microstructure and Strength of Dissimilar Friction Stir Spot-Welded Al-5083 and St-12 Alloy Sheets

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2017 | Journal article
EID:

2-s2.0-85010805012

Contributors: Fereiduni, E.; Movahedi, M.; Kokabi, A.H.; Najafi, H.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Effect of plasma electrolytic oxidation on joining of AA 5052 aluminium alloy to polypropylene using friction stir spot welding

Surface and Coatings Technology
2017 | Journal article
EID:

2-s2.0-85012249151

Contributors: Aliasghari, S.; Ghorbani, M.; Skeldon, P.; Karami, H.; Movahedi, M.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Friction stir lap joining of aluminium alloy to polypropylene sheets

Science and Technology of Welding and Joining
2017 | Journal article
EID:

2-s2.0-84978511502

Contributors: Shahmiri, H.; Movahedi, M.; Kokabi, A.H.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Microstructure, Strength, and Wear Behavior Relationship in Al-Fe<inf>3</inf>O<inf>4</inf> Nanocomposite Produced by Multi-pass Friction Stir Processing

Journal of Materials Engineering and Performance
2017 | Journal article
EID:

2-s2.0-85020075837

Contributors: Eftekhari, M.; Movahedi, M.; Kokabi, A.H.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Resistance spot welding of martensitic stainless steel: Effect of initial base metal microstructure on weld microstructure and mechanical performance

Materials Science and Engineering A
2017 | Journal article
EID:

2-s2.0-85025598601

Contributors: Shirmohammadi, D.; Movahedi, M.; Pouranvari, M.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Welding metallurgy of duplex stainless steel during resistance spot welding

Welding Journal
2017 | Journal article
EID:

2-s2.0-85030665251

Contributors: Arabi, S.H.; Pouranvari, M.; Movahedi, M.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Welding metallurgy of martensitic advanced high strength steels during resistance spot welding

Science and Technology of Welding and Joining
2017 | Journal article
EID:

2-s2.0-84995460889

Contributors: Tamizi, M.; Pouranvari, M.; Movahedi, M.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Dissimilar Al/steel friction stir spot welding: To penetrate into the lower steel sheet or not?

Science and Technology of Welding and Joining
2016 | Journal article
EID:

2-s2.0-84981229260

Contributors: Fereiduni, E.; Movahedi, M.; Kokabi, A.H.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Role of zinc layer in resistance spot welding of aluminium to steel

Materials and Design
2016 | Journal article
EID:

2-s2.0-84963767016

Contributors: Arghavani, M.R.; Movahedi, M.; Kokabi, A.H.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Upset Resistance Welding of Carbon Steel to Austenitic Stainless Steel Narrow Rods

Journal of Materials Engineering and Performance
2016 | Journal article
EID:

2-s2.0-84986317441

Contributors: Ozlati, A.; Movahedi, M.; Mohammadkamal, H.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Aluminum/steel joints made by an alternative friction stir spot welding process

Journal of Materials Processing Technology
2015 | Journal article
EID:

2-s2.0-84929172761

Contributors: Fereiduni, E.; Movahedi, M.; Kokabi, A.H.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

In-situ aluminum matrix composite produced by friction stir processing using FE particles

Materials Science and Engineering A
2015 | Journal article
EID:

2-s2.0-84934288151

Contributors: Sarkari Khorrami, M.; Samadi, S.; Janghorban, Z.; Movahedi, M.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Microstructure evolutions and mechanical properties of tubular aluminum produced by friction stir back extrusion

Materials and Design
2015 | Journal article
EID:

2-s2.0-84918572943

Contributors: Sarkari Khorrami, M.; Movahedi, M.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Study on Joint Interface and Mechanical Properties of Cu/Pb-Sn/Cu Lap Joint Produced by Friction Stir Soldering Process

Journal of Materials Engineering and Performance
2015 | Journal article
EID:

2-s2.0-84937760902

Contributors: Sarkari Khorrami, M.; Kokabi, A.H.; Movahedi, M.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Growth kinetics of Al-Fe intermetallic compounds during annealing treatment of friction stir lap welds

Materials Characterization
2014 | Journal article
EID:

2-s2.0-84894084131

Contributors: Movahedi, M.; Kokabi, A.H.; Seyed Reihani, S.M.; Najafi, H.; Farzadfar, S.A.; Cheng, W.J.; Wang, C.J.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Effect of annealing treatment on joint strength of aluminum/steel friction stir lap weld

Materials and Design
2013 | Journal article
EID:

2-s2.0-84866275987

Contributors: Movahedi, M.; Kokabi, A.H.; Seyed Reihani, S.M.; Cheng, W.J.; Wang, C.J.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Effect of tool travel and rotation speeds on weld zone defects and joint strength of aluminium steel lap joints made by friction stir welding

Science and Technology of Welding and Joining
2012 | Journal article
EID:

2-s2.0-84856044068

Contributors: Movahedi, M.; Kokabi, A.H.; Seyed Reihani, S.M.; Najafi, H.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Investigation on friction stir lap welding of aluminium to aluminium clad steel sheets

Science and Technology of Welding and Joining
2012 | Journal article
EID:

2-s2.0-84857549574

Contributors: Movahedi, M.; Kokabi, A.H.; Seyed Reihani, S.M.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Investigation on the bond strength of Al-1100/St-12 roll bonded sheets, optimization and characterization

Materials and Design
2011 | Journal article
EID:

2-s2.0-79953162112

Contributors: Movahedi, M.; Kokabi, A.H.; Seyed Reihani, S.M.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Mechanical and microstructural characterization of A1-5083/St-12 lap joints made by friction stir welding

Procedia Engineering
2011 | Conference paper
EID:

2-s2.0-80052917496

Contributors: Movahedi, M.; Kokabi, A.H.; Seyed Reihani, S.M.; Najafi, H.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Roll bonding behaviour of Al-3003/Al-4043 and Al-3003/Zn sheets

Metals and Materials International
2011 | Journal article
EID:

2-s2.0-80053206459

Contributors: Movahedi, M.; Kokabi, A.-H.; Madaah-Hosseini, H.-R.; Kiani, M.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

An investigation on the soldering of Al 3003/Zn sheets

Materials Characterization
2009 | Journal article
EID:

2-s2.0-61349170150

Contributors: Movahedi, M.; Kokabi, A.H.; Madaah Hosseini, H.R.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

The influence of roll bonding parameters on the bond strength of Al-3003/Zn soldering sheets

Materials Science and Engineering A
2008 | Journal article
EID:

2-s2.0-43549091375

Contributors: Movahedi, M.; Madaah-Hosseini, H.R.; Kokabi, A.H.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Combined effect of cooling slope angle and mould vibration on semisolid microstructures of wrought aluminium alloy 7075

International Journal of Cast Metals Research
2007 | Journal article
EID:

2-s2.0-38149002931

Contributors: Movahedi, M.; Taheri, A.K.; Niamanesh, H.
Source: Self-asserted source
Mojtaba Movahedi via Scopus - Elsevier

Peer review (31 reviews for 13 publications/grants)

Review activity for Advanced engineering materials (1)
Review activity for Composite structures (1)
Review activity for International journal, advanced manufacturing technology. (2)
Review activity for JOM. (1)
Review activity for Journal of alloys and compounds. (1)
Review activity for Journal of materials processing technology. (2)
Review activity for Journal of Materials Research and Technology. (11)
Review activity for Materials and design. (2)
Review activity for Materials letters. (1)
Review activity for Materials science & engineering. (2)
Review activity for Materials today communications. (3)
Review activity for Metals and Materials International. (1)
Review activity for Tribology international. (3)