Personal information

Activities

Employment (1)

St. Peter's Institute of Higher Education and Research: Chennai, Tamilnadu, IN

2018-07-01 to present | Professor (Mechanical Engineering)
Employment
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN

Works (49)

Combustion, Performance and Emissions Characteristics of CRDI engine Fueled with Biodiesel, Ethanol & Butanol blends at Various Fuel Injection strategies

Journal of Applied Science and Engineering (Taiwan)
2022 | Journal article
EID:

2-s2.0-85128204888

Part of ISSN: 27089975 27089967
Contributors: Yogesh, P.; Chandramohan, D.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Multi-potency of bast fibers (flax, hemp and jute) as composite materials and their mechanical properties: A review

Materials Today: Proceedings
2022 | Conference paper
EID:

2-s2.0-85133237962

Part of ISSN: 22147853
Contributors: Murali, B.; Yogesh, P.; Karthickeyan, N.K.; Chandramohan, D.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

A comparative study on surface strengthening characterisation and residual stresses of dental alloys using laser shock peening

International Journal of Ambient Energy
2021 | Journal article
EID:

2-s2.0-85066071193

Contributors: Gurusami, K.; Shanmuga Sundaram, K.; Chandramohan, D.; Dinesh Kumar, S.; Vasantha Srinivasan, P.; Sathish, T.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Experimental investigation on stacking sequence of Kevlar and natural fibres/epoxy polymer composites

Polímeros
2021 | Journal article
Contributors: Murali Banu; Vijaya Ramnath Bindu Madhavan; Dhanashekar Manickam; Chandramohan Devarajan
Source: check_circle
Crossref

A facile synthesis of Ag/ZnO nanocomposites prepared via novel green mediated route for catalytic activity

Applied Physics A
2021-09 | Journal article
Part of ISSN: 0947-8396
Part of ISSN: 1432-0630
Contributors: T. Sathish; D. Chandramohan; S. Dinesh Kumar; S. Rajkumar; V. Vijayan
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN
grade
Preferred source (of 2)‎

A novel technique to design and production of coil spring in centre lathe

Materials Today: Proceedings
2020 | Conference paper
EID:

2-s2.0-85098577517

Part of ISSN: 22147853
Contributors: Sathish, T.; Sabarirajan, N.; Chandramohan, D.; Karthick, S.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

ANN-AGCS for the prediction of temperature distribution and required energy in hot forging process using finite element analysis

Materials Today: Proceedings
2020 | Conference paper
EID:

2-s2.0-85071173232

Part of ISBN:

22147853

Contributors: Dinesh Kumar, S.; Purushothaman, K.; Chandramohan, D.; Mohinish Dushyantraj, M.; Sathish, T.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Characterization of hybrid aloe vera/bamboo/palm/kevlar fibers for better mechanical properties

Materials Today: Proceedings
2020 | Conference paper
EID:

2-s2.0-85102429929

Part of ISSN: 22147853
Contributors: Chandramohan, D.; Dhanashekar, M.; Sathish, T.; Kumar, S.D.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Computer aided diagnosis of line balancing scheduling algorithm using optimization techniques

Journal of Advanced Research in Dynamical and Control Systems
2020 | Journal article
EID:

2-s2.0-85082855143

Part of ISSN: 1943023X
Contributors: Saravanakumar, R.; Chandra Mohan, D.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Effect of inter-facial coupled contact forces in the multilayered pacemaker lead cable

AIP Conference Proceedings
2020 | Conference paper
EID:

2-s2.0-85096405118

Part of ISBN:

15517616 0094243X

Contributors: Raja, G.; Chandramohan, D.; Gnanavel, B.K.; Sathish, T.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Effect of interfacial contact forces and lay ratio in cardiac lead outer insulation due to internal cable motion

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2020 | Conference paper
EID:

2-s2.0-85101211773

Contributors: Gnanavel, B.K.; Raja, G.; Chandramohan, D.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Machining parameters optimization of surface roughness analysis for AA5083 - Boron carbide (B4C) composites

Materials Today: Proceedings
2020 | Conference paper
EID:

2-s2.0-85098588023

Part of ISSN: 22147853
Contributors: Rajesh, S.; Chandramohan, D.; Sathish, T.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Mechanical and thermal properties of jute/aloevera hybrid natural fiber reinforced composites

AIP Conference Proceedings
2020 | Conference paper
EID:

2-s2.0-85096366739

Part of ISBN:

15517616 0094243X

Contributors: Chandramohan, D.; Sathish, T.; Dinesh Kumar, S.; Sudhakar, M.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Microstructural analysis of Friction stir welded AA 7010 - Titanium Diboride (TiB2) reinforced Composites

Materials Today: Proceedings
2020 | Conference paper
EID:

2-s2.0-85098564689

Part of ISSN: 22147853
Contributors: Logendran, D.; Chandramohan, D.; Sathish, T.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Numerical analysis of cardiac lead due to internal cable motion

AIP Conference Proceedings
2020 | Conference paper
EID:

2-s2.0-85096385282

Part of ISBN:

15517616 0094243X

Contributors: Raja, G.; Chandramohan, D.; Gnanavel, B.K.; Sathish, T.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Teaching learning optimization and neural network for the effective prediction of heat transfer rates in tube heat exchangers

Thermal Science
2020 | Journal article
EID:

2-s2.0-85083265342

Part of ISBN:

03549836

Contributors: Thanikodi, S.; Singaravelu, D.K.; Devarajan, C.; Venkatraman, V.; Rathinavelu, V.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Optimal prediction of process parameters by GWO-KNN in stirring-squeeze casting of AA2219 reinforced metal matrix composites

Materials Today: Proceedings
2020-11 | Journal article
Contributors: T. Adithiyaa; D. Chandramohan; T. Sathish
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Strengthening mechanism of Nd: Yag laser shock peening for commercially pure titanium (CP-TI) on surface integrity and residual stresses

Materials Today: Proceedings
2020-10 | Journal article
Contributors: K. Gurusami; D. Chandramohan; S. Dinesh Kumar; M. Dhanashekar; T. Sathish
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Optimal hydraulic and thermal constrain for plate heat exchanger using multi objective wale optimization

Materials Today: Proceedings
2020-09 | Journal article
Contributors: S. Dinesh Kumar; D. Chandramohan; K. Purushothaman; T. Sathish
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Experimental investigation on single point incremental forming of IS513Cr3 using response surface method

Materials Today: Proceedings
2020-08 | Journal article
Contributors: M.D. Vijayakumar; D Chandramohan; G. Gopalaramasubramaniyan
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Flower Pollination Algorithm for the optimization of stair casting parameter for the preparation of AMC

Materials Today: Proceedings
2020-08 | Journal article
Contributors: T. Adithiyaa; D. Chandramohan; T. Sathish
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Aspergillus flavus (Link) toxins reduces the fitness of dengue vector Aedes aegypti (Linn.) and their non-target toxicity against aquatic predator

Microbial Pathogenesis
2019 | Journal article
EID:

2-s2.0-85060212149

Contributors: Vasantha-Srinivasan, P.; Karthi, S.; Chellappandian, M.; Ponsankar, A.; Thanigaivel, A.; Senthil-Nathan, S.; Chandramohan, D.; Ganesan, R.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Design and analysis of wind box segment in travelling grate stoker boiler using CFD

International Journal of Recent Technology and Engineering
2019 | Journal article
EID:

2-s2.0-85064120042

Contributors: Sathish, T.; Chandramohan, D.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Experimental study and model development for on-line drill wear monitoring system using lab view

International Journal of Recent Technology and Engineering
2019 | Journal article
EID:

2-s2.0-85064136329

Contributors: Sathish, T.; Chandramohan, D.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Free vibrational analysis of cortical / hard cancellous bone by using of FEA

Materials Today: Proceedings
2019 | Conference paper
EID:

2-s2.0-85070853054

Contributors: Chandramohan, D.; Ravikumar, L.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Investigation on microstructural and mechanical properties of Cu reinforced with Sic composites prepared by microwave sintering process

Journal of New Materials for Electrochemical Systems
2019 | Journal article
EID:

2-s2.0-85083579342

Part of ISBN:

14802422

Contributors: Sathish, T.; Chandramohan, D.; Vijayan, V.; Sebastian, P.J.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Larvicidal and enzyme inhibition of essential oil from Spheranthus amaranthroids (Burm.) against lepidopteran pest Spodoptera litura (Fab.) and their impact on non-target earthworms

Biocatalysis and Agricultural Biotechnology
2019 | Journal article
EID:

2-s2.0-85071717320

Contributors: Murfadunnisa, S.; Vasantha-Srinivasan, P.; Ganesan, R.; Senthil-Nathan, S.; Kim, T.-J.; Ponsankar, A.; Dinesh Kumar, S.; Chandramohan, D.; Krutmuang, P.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Machining characteristics of natural fiber particle reinforced polymer composite material using artificial neural network

International Journal of Innovative Technology and Exploring Engineering
2019 | Journal article
EID:

2-s2.0-85069498347

Part of ISBN:

22783075

Contributors: Naresh Kumar, T.; Murali, B.; Arulmani, J.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Mechanical properties of Boehmeria nivea reinforced polymer composite

Materials Today: Proceedings
2019 | Conference paper
EID:

2-s2.0-85070853817

Contributors: Murali, B.; Vijaya Ramnath, B.; Chandramohan, D.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Teaching methods and methodologies used in laboratories

International Journal of Recent Technology and Engineering
2019 | Journal article
EID:

2-s2.0-85064139931

Contributors: Sathish, T.; Chandramohan, D.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Mechanical, Moisture Absorption, and Abrasion Resistance Properties of Bamboo–Jute–Glass Fiber Composites

Journal of Bio- and Tribo-Corrosion
2019-09 | Journal article
Contributors: D. Chandramohan; B. Murali; P. Vasantha-Srinivasan; S. Dinesh Kumar
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Experimental investigation of mechanical properties of GFRP reinforced with coir and flax

International Journal of Mechanical Engineering and Technology
2018 | Journal article
EID:

2-s2.0-85059269078

Contributors: Pandyaraj, V.; Ravi Kumar, L.; Chandramohan, D.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Microstructure and mechanical properties of MG/WC composites prepared by stir casting method

International Journal of Mechanical Engineering and Technology
2018 | Journal article
EID:

2-s2.0-85058946169

Contributors: Praveenkumar, R.; Periyasamy, P.; Mohanavel, V.; Chandramohan, D.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Modelling K-nearest neighbour technique for the parameter prediction of cryogenic treated tool in surface roughness minimization

International Journal of Mechanical and Production Engineering Research and Development
2018 | Journal article
EID:

2-s2.0-85052581866

Contributors: Sathish, T.; Periyasamy, P.; Chandramohan, D.; Nagabhooshanam, N.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Modelling of cost based optimization system E-O-L disassembly in reverse logistics

International Journal of Mechanical and Production Engineering Research and Development
2018 | Journal article
EID:

2-s2.0-85052585983

Contributors: Sathish, T.; Periyasamy, P.; Chandramohan, D.; Nagabhooshanam, N.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Experimental data on the properties of natural fiber particle reinforced polymer composite material

Data in Brief
2017 | Journal article
EID:

2-s2.0-85021067559

Contributors: Chandramohan, D.; Presin Kumar, A.J.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Chemical treatment on hemp/polymer composites

Journal of Chemical and Pharmaceutical Research
2014 | Journal article
EID:

2-s2.0-84907506291

Contributors: Murali, B.; Chandra Mohan, D.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Effects Of chemical treatment on jute fiber reinforced composites

International Journal of Applied Chemistry
2014 | Journal article
EID:

2-s2.0-84924331959

Contributors: Chandramohan, D.; Senthilathiban, A.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Increasing combusting resistance for Hybrid composites

International Journal of Applied Engineering Research
2014 | Journal article
EID:

2-s2.0-84939154659

Contributors: Chandramohan, D.; Rajesh, S.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Machining of composites - A review

Academic Journal of Manufacturing Engineering
2014 | Journal article
EID:

2-s2.0-84930355107

Contributors: Chandramohan, D.; Murali, B.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Mechanical behavior of chemically treated jute/polymer composites

Carbon - Science and Technology
2014 | Journal article
EID:

2-s2.0-84900028135

Contributors: Murali, B.; Chandra Mohan, D.; Nagoor Vali, S.K.; Muthukumarasamy, S.; Mohan, A.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Natural fiber reinforced polymer composites for automobile accessories

American Journal of Environmental Sciences
2014 | Journal article
EID:

2-s2.0-84897058644

Contributors: Chandramohan, D.; Bharanichandar, J.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Progress of biomaterials in the field of orthopaedics

American Journal of Applied Sciences
2014 | Journal article
EID:

2-s2.0-84896479541

Contributors: Chandramohan, D.; Bharanichandar, J.; Karthikeyan, P.; Vijayan, R.; Murali, B.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Study of machining parameters on natural fiber particle reinforced polymer composite material

Academic Journal of Manufacturing Engineering
2014 | Journal article
EID:

2-s2.0-84930318868

Contributors: Chandramohan, D.; Rajesh, S.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Design and fabrication of construction helmet by using hybrid composite material

2013 International Conference on Energy Efficient Technologies for Sustainability, ICEETS 2013
2013 | Conference paper
EID:

2-s2.0-84881037739

Contributors: Murali, B.; Nagarani, J.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Impact test on natural fiber reinforced polymer composite materials

Carbon - Science and Technology
2013 | Journal article
EID:

2-s2.0-84890832953

Contributors: Chandramohan, D.; Bharanichandar, J.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Applications of natural fiber composites for replacement of orthopaedic alloys

Proceedings of the International Conference on Nanoscience, Engineering and Technology, ICONSET 2011
2011 | Conference paper
EID:

2-s2.0-84862836725

Contributors: Chandramohan, D.; Marimuthu, K.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Characterization of natural fibers and their application in bone grafting substitutes

Acta of Bioengineering and Biomechanics
2011 | Journal article
EID:

2-s2.0-79955518332

Contributors: Chandramohan, D.; Marimuthu, K.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier

Natural fiber particle reinforced composite material for bone implant

European Journal of Scientific Research
2011 | Journal article
EID:

2-s2.0-79959954419

Contributors: Chandramohan, D.; Marimuthu, K.
Source: Self-asserted source
CHANDRAMOHAN DEVARAJAN via Scopus - Elsevier