Personal information

Other IDs

Scopus Author ID: 55373112000
ResearcherID: M-3328-2014

Biography

Prosenjit Das is presently working as an Assistant Professor at Department of Materials Engineering, Indian Institute of Science Bangalore. Earlier he was working as a Principal Scientist with the "Design and Manufacturing Research Centre" at CSIR-Central Mechanical Engineering Research Institute, India. He has written nearly 100 scientific papers till date in different international journals and conferences. He has done his B.Tech from Kalyani Govt. Engg. College, India, M.Tech from IIT Roorkee, India and obtained his PhD from IISc Bangalore, India.

Activities

Collapse all

Employment (2)

Indian Institute of Science Bangalore: Bangalore, Karnataka, IN

2022-06-06 to present | Assistant Professor (Materials Engineering)
Employment
Source: Self-asserted source
Prosenjit Das

Central Mechanical Engineering Research Institute: Durgapur, West Bengal, IN

2010-08-02 to 2022-06-03
Employment
Source: Self-asserted source
Prosenjit Das

Education and qualifications (3)

Indian Institute of Science: Bangalore, KA, IN

2013-08-01 to 2016-12-13 | PhD (Mechanical Engineering)
Education
Source: Self-asserted source
Prosenjit Das

Indian Institute of Technology Roorkee: Roorkee, Uttar Pradesh, IN

2008-07-28 to 2010-07-30 | M.Tech (Metallurgical and Materials Engineering)
Education
Source: Self-asserted source
Prosenjit Das

Kalyani Government Engineering College: Kalyani, West Bengal, IN

2004-07-25 to 2008-07-27 | B.Tech (Mechanical Engineering)
Education
Source: Self-asserted source
Prosenjit Das

Professional activities (2)

Indian Institute of Science Bangalore: Bangalore, Karnataka, IN

Distinction
Source: Self-asserted source
Prosenjit Das

Indian Institute of Science Bangalore: Bangalore, Karnataka, IN

Membership
Source: Self-asserted source
Prosenjit Das

Funding (14)

Design, analysis and development of Rheo gravity die cast Al-15Mg2Si-4.5Si composite brake disc for automobile application

2022-03 to 2024-03 | Award
Science and Engineering Research Board (New Delhi, IN)
Source: Self-asserted source
Prosenjit Das

Design, Analysis and development of Rheo gravity die cast Al-15Mg2Si-4.5Si composite based light weight Bucket links for Mining Excavators

2021-07 to 2023-07 | Grant
Ministry of Mines (New Delhi, IN)
GRANT_NUMBER:

GAP236012
Source: Self-asserted source
Prosenjit Das

Compocasting of A356-MWCNT alloy composite targeting structural application

2021-01 to 2022-05 | Award
Central Mechanical Engineering Research Institute, Council of Scientific and Industrial Research (Durgapur, IN)
GRANT_NUMBER:

GAP233712
Source: Self-asserted source
Prosenjit Das

Design and Development of Tooth colored Ceramic Dental Braces set by Micro-Ceramic Injection Moulding

2020-02 to 2023-02 | Award
Department of Science and Technology (New Delhi, IN)
GRANT_NUMBER:

GAP229612
Source: Self-asserted source
Prosenjit Das

Development of Stirrcast heat sink out of Al-Si-MWCNT alloy composite for Thermal management of high power LEDs

2019-04 to 2022-05 | Grant
Department of Science and Technology (New Delhi, IN)
GRANT_NUMBER:

GAP224712
Source: Self-asserted source
Prosenjit Das

Development of Net shape Alumina Dental Brackets by Ceramic Injection Moulding

2015-08 to 2018-08 | Award
Department of Science and Technology (New Delhi, IN)
GRANT_NUMBER:

GAP121912
Source: Self-asserted source
Prosenjit Das

Rheo-pressure die casting of Al-Mg2Si-Si composites

2014-07 to 2018-07 | Award
Department of Science and Technology, Ministry of Science and Technology (New Delhi, IN)
GRANT_NUMBER:

GAP121612
Source: Self-asserted source
Prosenjit Das

Development of process technology for manufacturing of auto engine components from hypereutectic Al-Si alloy with superior high temperature properties

2012-03 to 2017-03 | Grant
Council of Scientific and Industrial Research (New Delhi, IN)
GRANT_NUMBER:

ESC0101/2
Source: Self-asserted source
Prosenjit Das

Micro-Powder Injection Moulding (µ-PIM)for metals and ceramics

2012-03 to 2017-03 | Grant
Council of Scientific and Industrial Research (New Delhi, IN)
GRANT_NUMBER:

ESC001/RPII/T1.6
Source: Self-asserted source
Prosenjit Das

Rheo Pressure Die Casting of Al-Mg Alloy Composite

2012-03 to 2017-03 | Grant
Council of Scientific and Industrial Research (New Delhi, IN)
GRANT_NUMBER:

ESC0101/1
Source: Self-asserted source
Prosenjit Das

Phase field modelling of Microstructure evolution of Rheo Cast Billets

2011-03 to 2013-03 | Grant
Council of Scientific and Industrial Research (New Delhi, IN)
GRANT_NUMBER:

OLP121212
Source: Self-asserted source
Prosenjit Das

Facility for Rheo-pressure die casting

2010-11 to present | Grant
Department of Science and Technology, Ministry of Science and Technology (New Delhi, IN)
GRANT_NUMBER:

GAP121212
Source: Self-asserted source
Prosenjit Das

Development of porous Nickel wick for space shuttle/satellite applications

2008-07 to 2011-09 | Grant
Indian Space Research Organisation (Bangalore, IN)
GRANT_NUMBER:

SSP120812
Source: Self-asserted source
Prosenjit Das

Investigation for development of porous wick out of nickel base alloy through Metal Injection Moulding (MIM) route

2008-07 to 2011-09 | Grant
Council of Scientific and Industrial Research (New Delhi, IN)
GRANT_NUMBER:

OLP120812
Source: Self-asserted source
Prosenjit Das

Works (49)

Multi‐Phase Field Model of Laser Powder Bed Fusion Based Additive Manufacturing of IN718 Superalloy

Advanced Theory and Simulations
2025-04-18 | Journal article
DOI: 10.1002/adts.202401031
Contributors: Shakti Kumar; Indrani Mukherjee; K. Pavan Chandu; Prosenjit Das
Source: check_circle
Crossref

Three-Dimensional Micromechanical Modelling of Deformation Behaviour of Rheocast A356 Alloy

International Journal of Metalcasting
2025-03 | Journal article
DOI: 10.1007/s40962-024-01342-4
Contributors: Durgesh Kumar Pandey; Prosenjit Das
Source: check_circle
Crossref

Effect of Fluid Flow on Microstructure Evolution During Rheo Gravity Die Casting of Novel Al–15Mg2Si–4.5Si Composite

Transactions of the Indian Institute of Metals
2024-10 | Journal article
DOI: 10.1007/s12666-023-03217-4
Contributors: Indrani Mukherjee; Prosenjit Das
Source: check_circle
Crossref

Effect of Strontium Addition on Semi-Solid Slurry Generation of Novel Al–15Mg2Si–4.5Si Composite During Cooling Slope Rheoprocessing

Transactions of the Indian Institute of Metals
2024-10 | Journal article
DOI: 10.1007/s12666-023-03183-x
Contributors: Prosenjit Das; Mohamed Afraaz Sultan
Source: check_circle
Crossref

Finite element modelling of deformation behaviour and failure analysis of roller and pin assembly in bucket wheel excavators used in opencast coal mines

Engineering Failure Analysis
2024-10 | Journal article
DOI: 10.1016/j.engfailanal.2024.108677
Contributors: Anubhav Singh; C. Sendil Kumar; Prosenjit Das
Source: check_circle
Crossref

Multiphysics Modelling of Laser Powder Bed Fusion Based Additive Manufacturing of Single-Track Build of Ti6Al4V Alloy

Transactions of the Indian Institute of Metals
2024-10 | Journal article
DOI: 10.1007/s12666-023-03189-5
Contributors: Shakti Kumar; Prosenjit Das
Source: check_circle
Crossref

A novel atomistic approach of estimating interfacial free energy and growth kinetics of primary Mg2Si during semi solid slurry formation of the novel Al–15Mg2Si–4.5Si composite

Applied Physics A
2024-05 | Journal article
DOI: 10.1007/s00339-024-07499-3
Contributors: Indrani Mukherjee; Prosenjit Das
Source: check_circle
Crossref

Multiphase Flow Simulation and Experimental Validation of Cooling Slope Rheoprocessing of A380 Alloy

International Journal of Metalcasting
2024-01 | Journal article
DOI: 10.1007/s40962-023-01036-3
Contributors: Prosenjit Das
Source: check_circle
Crossref

Isothermal coarsening of cooling slope processed semi-solid A380 Al alloy slurry

International Journal of Cast Metals Research
2023-11-02 | Journal article
DOI: 10.1080/13640461.2023.2269353
Contributors: Prosenjit Das
Source: check_circle
Crossref

A molecular dynamics study of sintering of micro injection moulded alumina nano particles

Philosophical Magazine
2023-09-02 | Journal article
DOI: 10.1080/14786435.2023.2224092
Contributors: Indrani Mukherjee; Prosenjit Das
Source: check_circle
Crossref

Microstructure Evolution During Rheoprocessing of A356 Al Alloy Using Cooling Slope

International Journal of Metalcasting
2023-07 | Journal article
DOI: 10.1007/s40962-022-00908-4
Contributors: Prosenjit Das
Source: check_circle
Crossref

Primary Phase Morphology of Cooling Slope-Processed A356 Al Alloy and Its Effect on Rheological Properties

International Journal of Metalcasting
2023-07 | Journal article
DOI: 10.1007/s40962-022-00930-6
Contributors: Prosenjit Das
Source: check_circle
Crossref

Optimisation of melt pouring temperature and low superheat casting of Al-15Mg2Si-4.5Si composite

International Journal of Cast Metals Research
2023-05-04 | Journal article
DOI: 10.1080/13640461.2023.2211895
Contributors: Prosenjit Das
Source: check_circle
Crossref

Globularization of Primary Phase of Al–7Si–0.3Mg Alloy During Cooling Slope Processing and Isothermal Holding

Transactions of the Indian Institute of Metals
2021 | Journal article
DOI: 10.1007/s12666-020-02177-3
EID:

2-s2.0-85101765829

Part of ISSN: 09751645 09722815
Contributors: Das, P.; Dutta, P.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Three-dimensional phase field simulation of spheroidal grain formation during semi solid processing of Al-7Si-0.3 Mg alloy

Computational Materials Science
2020 | Journal article
DOI: 10.1016/j.commatsci.2020.109856
EID:

2-s2.0-85085965548

Part of ISSN: 09270256
Contributors: Das, P.; Dutta, P.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Studies on die filling of A356 Al alloy and development of a steering knuckle component using rheo pressure die casting system

Journal of Materials Processing Technology
2019 | Journal article
DOI: 10.1016/j.jmatprotec.2019.04.014
EID:

2-s2.0-85064070332

Part of ISSN: 09240136
Contributors: Das, P.; Bhuniya, B.; Samanta, S.K.; Dutta, P.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Multi phase model of semi solid slurry generation during cooling slope processing of melt treated AL- 7SI-0.3 MG alloy

International Conference on Computational Methods for Thermal Problems
2018 | Conference paper
EID:

2-s2.0-85061149139

Part of ISSN: 23056924 23055995
Contributors: Das, P.; Dutta, P.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Multiphase Model of Semisolid Slurry Generation and Isothermal Holding During Cooling Slope Rheoprocessing of A356 Al Alloy

Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science
2018 | Journal article
DOI: 10.1007/s11663-018-1211-1
EID:

2-s2.0-85045453889

Part of ISSN: 10735615
Contributors: Das, P.; Samanta, S.K.; Mondal, B.; Dutta, P.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Modelling of flow behaviour in a LD vessel by an impinging gas jet

Progress in Computational Fluid Dynamics
2017 | Journal article
DOI: 10.1504/PCFD.2017.084347
EID:

2-s2.0-85020462250

Part of ISSN: 17415233 14684349
Contributors: Mondal, M.K.; Das, P.; Karmakar, N.; Banik, N.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Micromechanics based modelling of deformation behaviour of grain refined rheocast Al-7Si-0.3Mg alloy

Materials Science and Technology (United Kingdom)
2016 | Journal article
DOI: 10.1179/1743284715Y.0000000092
EID:

2-s2.0-84987630593

Part of ISSN: 17432847 02670836
Contributors: Das, P.; Islam, S.T.; Das, S.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Microscale deformation behavior of rheocast Al-7Si-0.3 Mg alloy

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
2016 | Journal article
DOI: 10.1177/1464420715595056
EID:

2-s2.0-85004065520

Part of ISSN: 20413076 14644207
Contributors: Das, P.; Islam, S.T.; Samanta, S.K.; Das, S.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Microstructure Evolution and Rheological Behavior of Cooling Slope Processed Al-Si-Cu-Fe Alloy Slurry

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2016 | Journal article
DOI: 10.1007/s11661-016-3356-3
EID:

2-s2.0-84958756437

Part of ISSN: 10735623
Contributors: Das, P.; Samanta, S.K.; Bera, S.; Dutta, P.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Phase field modelling of microstructure evolution and ripening driven grain growth during cooling slope processing of A356 Al alloy

Computational Materials Science
2016 | Journal article
DOI: 10.1016/j.commatsci.2016.08.022
EID:

2-s2.0-84984655375

Part of ISSN: 09270256
Contributors: Das, P.; Dutta, P.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Deformation behaviour of Rheocast A356 Al alloy at microlevel considering approximated RVEs

Metals and Materials International
2015 | Journal article
DOI: 10.1007/s12540-015-4234-z
EID:

2-s2.0-84924757511

Part of ISSN: 20054149 15989623
Contributors: Islam, S.T.; Das, P.; Das, S.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Die Filling Behaviour of Semi Solid A356 Al Alloy Slurry During Rheo Pressure Die Casting

Transactions of the Indian Institute of Metals
2015 | Journal article
DOI: 10.1007/s12666-015-0706-6
EID:

2-s2.0-84946477141

Part of ISSN: 09751645 09722815
Contributors: Das, P.; Samanta, S.K.; Tiwari, S.; Dutta, P.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Rheological Behavior of Al-7Si-0.3Mg Alloy at Mushy State

Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science
2015 | Journal article
DOI: 10.1007/s11663-015-0290-5
EID:

2-s2.0-84929705608

Part of ISSN: 10735615
Contributors: Das, P.; Samanta, S.K.; Dutta, P.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Rheological behavior of semi-solid TiB<sub>2</sub> reinforced Al composite

Transactions of Nonferrous Metals Society of China (English Edition)
2015 | Journal article
DOI: 10.1016/S1003-6326(15)63908-5
EID:

2-s2.0-84943407875

Part of ISSN: 22103384 10036326
Contributors: Thadela, S.; Mandal, B.; Das, P.; Roy, H.; Lohar, A.K.; Samanta, S.K.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Study of microstructure evolution during semi-solid processing of an in-situ Al alloy composite

Materials and Manufacturing Processes
2015 | Journal article
DOI: 10.1080/10426914.2014.952040
EID:

2-s2.0-84923018590

Part of ISSN: 15322475 10426914
Contributors: Kumar, S.; Das, P.; Tiwari, S.K.; Mondal, M.K.; Bera, S.; Roy, H.; Samanta, S.K.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Wear Behavior of Cooling Slope Rheocast A356 Al Alloy

Tribology Transactions
2015 | Journal article
DOI: 10.1080/10402004.2015.1040905
EID:

2-s2.0-84940734901

Part of ISSN: 1547397X 10402004
Contributors: Das, P.; Show, B.K.; Rathore, A.; Samanta, S.K.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Fracture property correlation of rheocast (EMS) and thixocast 6061 aluminium alloy

Solid State Phenomena
2014 | Book
DOI: 10.4028/www.scientific.net/SSP.217-218.405
EID:

2-s2.0-84914178983

Part of ISSN: 16629779 10120394
Contributors: Singh, S.K.; Das, P.; Chattopadhyay, K.; Dutta, P.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Optimization of degree of sphericity of primary phase during cooling slope casting of A356 Al alloy: Taguchi method and regression analysis

2014 | Journal article
DOI:

10.1016/j.measurement.2014.05.022

EID:

2-s2.0-84903987818
Contributors: Das, P.; Samanta, S.K.; Das, R.; Dutta, P.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Phase field simulation of equiaxed microstructure formation during semi-solid processing of A380 Al alloy

2014 | Journal article
DOI:

10.2355/isijinternational.54.1601

EID:

2-s2.0-84906727643
Contributors: Das, P.; Samanta, S.K.; Kumar, P.; Dutta, P.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Semisolid processing of A380 al alloy using cooling slope

2014 | Journal article
DOI:

10.1080/10426914.2013.852212

EID:

2-s2.0-84897477474
Contributors: Das, P.; Kumar, M.; Samanta, S.K.; Dutta, P.; Ghosh, D.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

A novel approach of manufacturing Nickel Wicks for loop heat pipes using Metal Injection Moulding (MIM)

2013 | Journal article
DOI:

10.1007/s12046-013-0135-3

EID:

2-s2.0-84877919565
Contributors: Samanta, S.K.; Das, P.; Lohar, A.K.; Roy, H.; Kumar, S.; Chowdhury, A.K.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Eulerian two-phase flow simulation and experimental validation of semisolid slurry generation process using cooling slope

2013 | Journal article
DOI:

10.1179/1743284712Y.0000000075

EID:

2-s2.0-84873841519
Contributors: Das, P.; Samanta, S.K.; Chattopadhyay, H.; Sharma, B.B.; Dutta, P.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Evaluation of primary phase morphology of cooling slope cast Al-Si-Mg alloy samples using image texture analysis

2013 | Journal article
DOI:

10.1177/0954405413490162

EID:

2-s2.0-84888986805
Contributors: Das, P.; Dutta, S.; Samanta, S.K.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Experimental finding of initiation fracture toughness and fem simulation of fracture behaviour of UFG 7075 al alloy

2013 | Journal article
DOI:

10.5185/amlett.2012.12490

EID:

2-s2.0-84883684486
Contributors: Das, P.; Jayaganthan, R.; Singh, I.V.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Failure analysis of a head gear pulley used in coal mines

2013 | Journal article
DOI:

10.1016/j.engfailanal.2013.01.046

EID:

2-s2.0-84874409507
Contributors: Shukla, A.K.; Das, P.; Dutta, S.; Ray, S.; Roy, H.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Rheological characterization of semi-solid A356 aluminium alloy

2013 | Book
DOI:

10.4028/www.scientific.net/SSP.192-193.329

EID:

2-s2.0-84870804630
Contributors: Das, P.; Samanta, S.K.; Chattopadhyay, H.; Dutta, P.; Barman, N.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Studies on rheocasting using cooling slope

2013 | Book
DOI:

10.4028/www.scientific.net/SSP.192-193.341

EID:

2-s2.0-84870838858
Contributors: Das, P.; Samanta, S.K.; Chattopadhyay, H.; Dutta, P.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Study of physical characteristics of nickel wicks developed by metal injection moulding

2013 | Journal article
DOI:

10.1179/1743290112Y.0000000049

EID:

2-s2.0-84877922785
Contributors: Samanta, S.K.; Das, P.; Lohar, A.K.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

An experimental evaluation of material properties and fracture simulation of cryorolled 7075 Al alloy

2012 | Journal article
DOI:

10.1007/s11665-011-0062-6

EID:

2-s2.0-84865318607
Contributors: Das, P.; Singh, I.V.; Jayaganthan, R.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Crack growth simulation of bulk and ultrafine grained 7075 Al alloy by XFEM

2012 | Journal article
DOI:

10.1504/IJMPT.2012.050192

EID:

2-s2.0-84868518492
Contributors: Das, P.; Singh, I.V.; Jayaganthan, R.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Effect of pouring temperature on cooling slope casting of semi-solid Al-Si-Mg alloy

2012 | Journal article
EID:

2-s2.0-84872354767
Contributors: Das, P.; Samanta, S.K.; Chattopadhyay, H.; Dutta, P.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Mechanical properties and tensile fracture mechanism of rheocast A356 Al alloy using cooling slope

2012 | Book
DOI:

10.4028/www.scientific.net/AMR.585.354

EID:

2-s2.0-84870608812
Contributors: Das, P.; Samanta, S.K.; Ray, T.; Venkatpathi, B.R.K.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Microstructural evolution of A356 Al alloy during flow along a cooling slope

2012 | Journal article
DOI:

10.1007/s12666-012-0208-8

EID:

2-s2.0-84889001421
Contributors: Das, P.; Samanta, S.K.; Venkatpathi, B.R.K.; Chattopadhyay, H.; Dutta, P.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Fatigue behaviour and crack growth rate of cryorolled Al 7075 alloy

2011 | Journal article
DOI:

10.1016/j.msea.2011.05.021

EID:

2-s2.0-79960618925
Contributors: Das, P.; Jayaganthan, R.; Chowdhury, T.; Singh, I.V.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Improvement of fracture toughness (K<sub>1c</sub>) of 7075 Al alloy by cryorolling process

Materials Science Forum
2011 | Book
DOI: 10.4028/www.scientific.net/MSF.683.81
EID:

2-s2.0-79957709057
Contributors: Das, P.; Jayaganthan, R.; Chowdhury, T.; Singh, I.V.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Tensile and impact-toughness behaviour of cryorolled Al 7075 alloy

2011 | Journal article
DOI:

10.1016/j.matdes.2010.09.026

EID:

2-s2.0-78649873608
Contributors: Das, P.; Jayaganthan, R.; Singh, I.V.
Source: Self-asserted source
Prosenjit Das via Scopus - Elsevier

Peer review (8 reviews for 7 publications/grants)

Review activity for Additive manufacturing. (1)
Review activity for Journal of materials science. (1)
Review activity for Materials today communications. (2)
Review activity for Nature communications (1)
Review activity for Steel research international (1)
Review activity for Transactions of the Indian Institute of Metals (1)
Review activity for Transactions of the Indian National Academy of Engineering (1)
How many people are using ORCID?