Personal information

Other IDs

Scopus Author ID: 6506959389
ResearcherID: P-7871-2019

Activities

Collapse all

Works (50 of 100)

Items per page:
Page 1 of 2

Effect of plasma sprayed flyash based composite coatings on corrosion resistance

Heliyon
2023 | Journal article
DOI: 10.1016/J.HELIYON.2023.E15552
WOSUID: WOS:000999097500001
Contributors: Naveena, B. E.; Keshavamurthy, R.; Muthiya, Solomon Jenoris; Dhanraj, Joshuva Arockia; Sirisamphanwong, Chattariya; Channumsin, Sittiporn; Channumsi, Manun; Chowdhury, Shahariar
Source: check_circle
Web of Science Researcher Profile Sync

Friction and Wear Behavior of Al-Graphene Nanocomposite Synthesized by Powder Metallurgy and Hot Extrusion

Journal of Materials Engineering and Performance
2023 | Journal article
DOI: 10.1007/S11665-023-08758-9
WOSUID: WOS:001073449800013
Contributors: Haseebuddin, M. R.; Keshavamurthy, R.; Kumar, S. J. Niteesh
Source: check_circle
Web of Science Researcher Profile Sync

Review of Development and Characterisation of Shape Memory Polymer Composites Fabricated Using Additive Manufacturing Technology

Engineering Proceedings
2023-12 | Journal article | Author
DOI: 10.3390/engproc2023059079
Contributors: Vijay Tambrallimath; Keshavamurthy R; Abhinandan Badari; Gagan Raj; Pradeepkumar G. S.
Source: check_circle
Multidisciplinary Digital Publishing Institute

Mechanical and Wear Studies of Boron Nitride-Reinforced Polymer Composites Developed via 3D Printing Technology

Polymers
2023-11 | Journal article | Author
DOI: 10.3390/polym15224368
Contributors: Keshavamurthy R; Vijay Tambrallimath; Swetha Patil; Ali A. Rajhi; Alaauldeen A. Duhduh; Mohammad Yunus Khan Tatagar
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎

Influence of heat treatment on microstructure and mechanical behaviour of hot-rolled Al-Mg-Si alloy

Advances in Materials and Processing Technologies
2022 | Journal article
DOI: 10.1080/2374068X.2020.1796463
WOSUID: WOS:000556420200001
Contributors: Kumar, R. Vasanth; Keshavamurthy, R.; Perugu, Chandra S.; Siddaraju, C.
Source: check_circle
Web of Science Researcher Profile Sync

Investigation of Microstructure and Mechanical Properties of Cast Al-10Zn-3.5Mg-2.5Cu Nanocomposite Reinforced with Graphene Nano Sheets Produced by Ultrasonic Assisted Stir Casting

International Journal of Metalcasting
2022 | Journal article
DOI: 10.1007/S40962-022-00826-5
WOSUID: WOS:000810305100002
Contributors: Alipour, Mohammad; Keshavamurthy, R.; Koppad, Praveennath G.; Shakiba, Ali; Reddy, Nagaraja C.
Source: check_circle
Web of Science Researcher Profile Sync

Synthesis and characterization of flyash reinforced polymer composites developed by Fused Filament Fabrication

Journal of Materials Research and Technology
2022 | Journal article
DOI: 10.1016/J.JMRT.2022.09.059
WOSUID: WOS:000908024700006
Contributors: Tambrallimath, Vijay; Keshavamurthy, R.; Davim, Paulo; Kumar, G. S. Pradeep; Pignatta, Gloria; Badari, Abhinandan; Khan, T. M. Yunus; Badruddin, Irfan Anjum
Source: check_circle
Web of Science Researcher Profile Sync

Editorial preface: A special issue on International Conference on Advanced Trends in Mechanical and Aerospace Engineering (ATMA-2019)

Materials Today: Proceedings
2021 | Journal article
DOI: 10.1016/J.MATPR.2021.09.001
WOSUID: WOS:000696733700001
Contributors: Bavan, D. Saravana; Keshavamurthy, R.; Koppad, Praveennath G.
Source: check_circle
Web of Science Researcher Profile Sync

Editorial preface: A special issue on International Conference on Advances in Materials, Ceramics & Engineering Sciences (AMCES-2020)

Materials Today: Proceedings
2021 | Journal article
DOI: 10.1016/J.MATPR.2021.08.014
WOSUID: WOS:000689243000001
Contributors: Raju, K. S. Anantha; Keshavamurthy, R.; Koppad, Praveennath G.; Prashantha, S. C.
Source: check_circle
Web of Science Researcher Profile Sync

Effect of salt spray parameters on TiC reinforced aluminium based in-situ metal matrix composites

Materials Today: Proceedings
2021 | Journal article
DOI: 10.1016/J.MATPR.2020.09.710
WOSUID: WOS:000686127400006
Contributors: Kumar, G. S. Pradeep; Keshavamurthy, R.; Akhil, Minumula Prabhu; Kumar, M. Harish; George, Vivin Chackalayil; Kavya, J. T.
Source: check_circle
Web of Science Researcher Profile Sync

Emergence of additive manufacturing in global scale during the crisis of 2019-nCoV (novel corona virus)

Materials Today: Proceedings
2021 | Journal article
DOI: 10.1016/J.MATPR.2020.12.999
WOSUID: WOS:000660296200012
Contributors: Tambrallimath, Vijay; Keshavamurthy, R.; Badari, Abhinandan; Ramesh, Lohith; Raj, Gagan
Source: check_circle
Web of Science Researcher Profile Sync

Influence of carbon nanofiber reinforcement on mechanical properties of polymer composites developed by FDM

Materials Today: Proceedings
2021 | Journal article
DOI: 10.1016/J.MATPR.2020.09.707
WOSUID: WOS:000686127400003
Contributors: Bilkar, Digamba; Keshavamurthy, R.; Tambrallimath, Vijay
Source: check_circle
Web of Science Researcher Profile Sync

Influence of hot rolling on friction and wear behaviour of Al6061-ZrB<sub>2</sub> in-situ metal matrix composites

Journal of Manufacturing Processes
2021 | Journal article
DOI: 10.1016/J.JMAPRO.2021.07.058
WOSUID: WOS:000694706800002
Contributors: Kumar, R. Vasanth; Keshavamurthy, R.; Perugu, Chandra S.; Alipour, M.; Siddaraju, C.
Source: check_circle
Web of Science Researcher Profile Sync

Investigations on mechanical behavior of hot rolled Al7075/TiO2/Gr hybrid composites

Ceramics International
2021 | Journal article
DOI: 10.1016/J.CERAMINT.2020.10.236
WOSUID: WOS:000635574200002
Contributors: Gajakosh, Amith Kumar; Keshavamurthy, R.; Jagadeesha, T.; Kumar, R. Suresh
Source: check_circle
Web of Science Researcher Profile Sync

Mechanical and wear behaviour of graphite nano filler reinforced Al 6061 composites

Materials Today: Proceedings
2021 | Journal article
DOI: 10.1016/J.MATPR.2020.09.690
WOSUID: WOS:000686130500026
Contributors: Gowda, B. N. Yuyuths; Haseebuddin, M. R.; Pal, Bhaskar; Keshavamurthy, R.
Source: check_circle
Web of Science Researcher Profile Sync

Numerical and experimental analysis of thermal conductivity of PC-ABS nanocomposite reinforced with graphene developed by fused deposition modeling

Materials Today: Proceedings
2021 | Journal article
DOI: 10.1016/J.MATPR.2021.05.369
WOSUID: WOS:000697052700013
Contributors: Tambrallimath, Vijay; Keshavamurthy, R.; Saravanabavan, D.; Badari, Abhinandan; Jeevan, M. C.
Source: check_circle
Web of Science Researcher Profile Sync

The Influence of Silicon Addition on Microstructure and Mechanical Properties of Manganese Bronze Alloys

Iranian Journal of Materials Science and Engineering
2021 | Journal article
DOI: 10.22068/IJMSE.2063
WOSUID: WOS:000663014300006
Contributors: Kuppahalli, Prabhakar; Keshavamurthy, Ramaiah; Sriram, Padmanathan; Narayana, Ahobal
Source: check_circle
Web of Science Researcher Profile Sync

Analysis of the Effect of Parameters on Fracture Toughness of Hemp Fiber Reinforced Hybrid Composites Using the ANOVA Method

Polymers
2021-09 | Journal article | Author
DOI: 10.3390/polym13173013
Contributors: Madhusudhana H K; M. Prasanna Kumar; Arun Y. Patil; Keshavamurthy R; Mohammad Yunus Khan Tatagar; Irfan Anjum Badruddin; Sarfaraz Kamangar
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎

Influence of Solid Lubricant Addition on Friction and Wear Response of 3D Printed Polymer Composites

Polymers
2021-08 | Journal article | Author
DOI: 10.3390/polym13172905
Contributors: Keshavamurthy R; Vijay Tambrallimath; Ali A. Rajhi; Shabbir Ahmed R. M; ARUN PATIL; Mohammad Yunus Khan Tatagar; R. Makannavar
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎

Mechanical Properties of PC-ABS-Based Graphene-Reinforced Polymer Nanocomposites Fabricated by FDM Process

Polymers
2021-08 | Journal article | Author
DOI: 10.3390/polym13172951
Contributors: Vijay Tambrallimath; Keshavamurthy R; Saravana D. Bavan; ARUN PATIL; Mohammad Yunus Khan Tatagar; Irfan Anjum Badruddin; Sarfaraz Kamangar
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎

An Improved Compocasting Technique for Uniformly Dispersed Multi-walled Carbon Nanotube in AA2219 Alloy Melt

FME Transactions
2020 | Journal article
DOI: 10.5937/FME2003581T
WOSUID: WOS:000540703200012
Contributors: Thomas, Shijo; Keshavamurthy, R.; Kumar, Pradeep G. S.; Tambrallimath, Vijay; Prasanna, G. D.
Source: check_circle
Web of Science Researcher Profile Sync

Design Optimization of Innovative Foldable Iron Box

Lecture Notes in Mechanical Engineering
2020 | Book
DOI: 10.1007/978-981-15-2696-1_5
EID:

2-s2.0-85081901017
Contributors: Shivappagoudar, A.R.; Gali, A.S.; Kuber, A.V.; Giraddi, S.I.; Havaldar, A.N.; Patil, A.Y.; Kotturshettar, B.B.; Keshavamurthy, R.
Source: Self-asserted source
Keshavamurthy R via Scopus - Elsevier

Friction and Wear Behaviour of Copper Reinforced Acrylonitrile Butadiene Styrene based Polymer Composite Developed by Fused Deposition Modelling Process

FME Transactions
2020 | Journal article
DOI: 10.5937/FME2003543K
WOSUID: WOS:000540703200007
Contributors: Keshavamurthy, R.; Tambrallimath, Vijay; Badari, Abhinandan; Krishna, Anand R.; Kumar, Pradeep G. S.; Jeevan, M. C.
Source: check_circle
Web of Science Researcher Profile Sync

Prediction of machining characteristics of Abrasive Water Jet Machined Al7075-TiB<sub>2</sub> In-situ composite

Materials Today: Proceedings
2020 | Journal article
DOI: 10.1016/J.MATPR.2020.04.395
WOSUID: WOS:000581118700076
Contributors: Kavya, J. T.; Keshavamurthy, R.; Kumar, G. S. Pradeep; Ugrasen, G.; Manjoth, S.
Source: check_circle
Web of Science Researcher Profile Sync

Additive Manufacturing Process and Their Applications for Green Technology

Soft Computing Techniques and Applications in Mechanical Engineering
2019 | Journal article
DOI: 10.4018/978-1-5225-5445-5.CH014
WOSUID: WOS:000488754300016
Contributors: Keshavamurthy, R.; Tambrallimath, Vijay; Kuppahalli, Prabhakar; Sekhar, N.
Source: check_circle
Web of Science Researcher Profile Sync

Comparative study on effects of slurry erosive parameters on plasma sprayed flyash-Al<inf>2</inf>O<inf>3</inf> and flyash-SiC composite coatings on Al6061 alloy

International Journal of Computational Materials Science and Surface Engineering
2019 | Journal article
DOI: 10.1504/IJCMSSE.2019.101657
EID:

2-s2.0-85071239593
Contributors: Naveena, B.E.; Keshavamurthy, R.; Sekhar, N.
Source: Self-asserted source
Keshavamurthy R via Scopus - Elsevier

Corrosion characteristics of plasma sprayed flyash-SiC and flyash-Al<inf>2</inf>O<inf>3</inf> composite coatings on the Al-6061 alloy

Materials Research Express
2019 | Journal article
DOI: 10.1088/2053-1591/ab28e1
EID:

2-s2.0-85069616712
Contributors: Keshavamurthy, R.; Naveena, B.E.; Ahamed, A.; Sekhar, N.; Peer, D.
Source: Self-asserted source
Keshavamurthy R via Scopus - Elsevier

Dry Sliding Wear Behaviour of Plasma Sprayed Flyash-Al<inf>2</inf>O<inf>3</inf> and Flyash-SiC Coatings on the Al6061 Aluminum Alloy

Silicon
2019 | Journal article
DOI: 10.1007/s12633-018-9978-x
EID:

2-s2.0-85054320548
Contributors: Naveena, B.E.; Keshavamurthy, R.; Sekhar, N.
Source: Self-asserted source
Keshavamurthy R via Scopus - Elsevier

Effect of hot extrusion on mechanical behaviour of boron nitride reinforced aluminium 6061-based metal matrix composites

International Journal of Materials Engineering Innovation
2019 | Journal article
DOI: 10.1504/IJMATEI.2019.099791
EID:

2-s2.0-85066097823
Contributors: Mukesh, Y.B.; Bharathesh, T.P.; Saravanan, R.; Keshavamurthy, R.
Source: Self-asserted source
Keshavamurthy R via Scopus - Elsevier

Electrochemical behavior of cast and forged aluminum based in-situ metal matrix composites

AIP Conference Proceedings
2019 | Conference paper
DOI: 10.1063/1.5092891
EID:

2-s2.0-85063252595
Contributors: Kumar, G.S.P.; Keshavamurthy, R.; Kumari, P.; Manjoth, S.; Kavya, J.T.
Source: Self-asserted source
Keshavamurthy R via Scopus - Elsevier

Experimental and Simulation Studies on Waste Vegetable Peels as Bio-composite Fillers for Light Duty Applications

Arabian Journal for Science and Engineering
2019 | Journal article
DOI: 10.1007/s13369-019-03951-2
EID:

2-s2.0-85067056985
Contributors: Patil, A.Y.; Banapurmath, N.R.; Yaradoddi, J.S.; Kotturshettar, B.B.; Shettar, A.S.; Basavaraj, G.D.; Keshavamurthy, R.; Yunus Khan, T.M.; Mathad, S.N.
Source: Self-asserted source
Keshavamurthy R via Scopus - Elsevier

Experimental and theoretical prediction of Copper-Nickel nano-phase diagram

Materials Research Express
2019 | Journal article
DOI: 10.1088/2053-1591/ab2fba
EID:

2-s2.0-85070765655
Contributors: Ram, H.R.A.; Kashyap, K.T.; Sridhar, K.S.; Venkatesh, K.; Gopalakrishna, K.; Keshavamurthy, R.
Source: Self-asserted source
Keshavamurthy R via Scopus - Elsevier

Mechanical Properties of Graphite Filled ABS Parts Developed by Fused Deposition Modelling

IOP Conference Series: Materials Science and Engineering
2019 | Conference paper
DOI: 10.1088/1757-899X/577/1/012146
EID:

2-s2.0-85077895918
Contributors: Makannavar, R.; Keshavamurthy, R.; Biradar, M.
Source: Self-asserted source
Keshavamurthy R via Scopus - Elsevier

Microstructural and Mechanical behaviour of Nickel Aluminum Bronze alloys

IOP Conference Series: Materials Science and Engineering
2019 | Conference paper
DOI: 10.1088/1757-899X/577/1/012044
EID:

2-s2.0-85077840796
Contributors: Kuppahalli, P.; Keshavamurthy, R.; Sriram, P.; Kavya, J.T.
Source: Self-asserted source
Keshavamurthy R via Scopus - Elsevier

Morphology Studies on Mechanically Milled Aluminium Reinforced with B <inf>4</inf> C and CNTs

Silicon
2019 | Journal article
DOI: 10.1007/s12633-018-9905-1
EID:

2-s2.0-85047667347
Contributors: Gowda, A.C.; Koppad, P.G.; Sethuram, D.; Keshavamurthy, R.
Source: Self-asserted source
Keshavamurthy R via Scopus - Elsevier

Synthesis and characterization of graphene filled PC-ABS filament for FDM applications

AIP Conference Proceedings
2019 | Conference paper
DOI: 10.1063/1.5085610
EID:

2-s2.0-85060469117
Contributors: Tambrallimath, V.; Keshavamurthy, R.; Saravanbavan, D.; Kumar, G.S.P.; Kumar, M.H.
Source: Self-asserted source
Keshavamurthy R via Scopus - Elsevier

Thermal behavior of PC-ABS based graphene filled polymer nanocomposite synthesized by FDM process

Composites Communications
2019 | Journal article
DOI: 10.1016/j.coco.2019.07.009
EID:

2-s2.0-85069806781
Contributors: Tambrallimath, V.; Keshavamurthy, R.; D, S.; Koppad, P.G.; Kumar, G.S.P.
Source: Self-asserted source
Keshavamurthy R via Scopus - Elsevier

Effect of hot extrusion and T6 heat treatment on microstructure and mechanical properties of Al-10Zn-3.5Mg-2.5Cu nanocomposite reinforced with graphene nanoplatelets

Journal of Manufacturing Processes
2018 | Journal article
DOI: 10.1016/j.jmapro.2018.10.026
EID:

2-s2.0-85055712323
Contributors: Mirjavadi, S.S.; Alipour, M.; Hamouda, A.M.S.; Kord, S.; Koppad, P.G.; Abuzin, Y.A.; Keshavamurthy, R.
Source: Self-asserted source
Keshavamurthy R via Scopus - Elsevier

Experimental investigation of glass- carbon/epoxy hybrid composites subjected to low velocity impact test

FME Transactions
2018 | Journal article
DOI: 10.5937/fmet1804595R
EID:

2-s2.0-85049453160
Contributors: Venkategowda, C.; Rajanna, S.; Udupa, N.G.S.; Keshavamurthy, R.
Source: Self-asserted source
Keshavamurthy R via Scopus - Elsevier

Impact of extrusion procession wear behavior of boron nitride reinforced aluminum 6061- based composites

International Journal of Mechanical and Production Engineering Research and Development
2018 | Journal article
DOI: 10.24247/ijmperddec201889
EID:

2-s2.0-85062681497
Contributors: Mukesh, Y.B.; Bharathesh, T.P.; Keshavamurthy, R.; Girish, H.N.
Source: Self-asserted source
Keshavamurthy R via Scopus - Elsevier

Influence of hot rolling on microstructure and mechanical behaviour of Al6061-ZrB<inf>2</inf> in-situ metal matrix composites

Materials Science and Engineering A
2018 | Journal article
DOI: 10.1016/j.msea.2018.09.104
EID:

2-s2.0-85054444157
Contributors: Kumar, R.V.; Keshavamurthy, R.; Perugu, C.S.; Koppad, P.G.; Alipour, M.
Source: Self-asserted source
Keshavamurthy R via Scopus - Elsevier

Investigation on Mechanical Behavior of Hot Rolled Al7075-TiB<inf>2</inf> In-situ Metal Matrix Composite

Materials Today: Proceedings
2018 | Conference paper
DOI: 10.1016/j.matpr.2018.10.430
EID:

2-s2.0-85058366183
Contributors: Gajakosh, A.K.; Keshavamurthy, R.; Ugrasen, G.; Adarsh, H.
Source: Self-asserted source
Keshavamurthy R via Scopus - Elsevier

Mechanical Properties of Friction Stir Processed Al6061-BN Surface Composite

Materials Today: Proceedings
2018 | Conference paper
DOI: 10.1016/j.matpr.2018.10.254
EID:

2-s2.0-85058412308
Contributors: Akshay, B.R.; Keshavamurthy, R.; Kuppahalli, P.; Sudhan, J.M.
Source: Self-asserted source
Keshavamurthy R via Scopus - Elsevier

Optimization of Process Parameters for Al6061-Al7075 alloys in Friction Stir Welding using Taguchi's Technique

Materials Today: Proceedings
2018 | Conference paper
DOI: 10.1016/j.matpr.2018.01.103
EID:

2-s2.0-85042429252
Contributors: Ugrasen, G.; Bharath, G.; Kumar, G.K.; Sagar, R.; Shivu, P.R.; Keshavamurthy, R.
Source: Self-asserted source
Keshavamurthy R via Scopus - Elsevier

Thermal conductivity of copper filled polymer composites synthesized by FDM process

International Journal of Mechanical and Production Engineering Research and Development
2018 | Journal article
EID:

2-s2.0-85069838041
Contributors: Tambrallimath, V.; Keshavamurthy, R.; Saravanabavan, D.
Source: Self-asserted source
Keshavamurthy R via Scopus - Elsevier

Thermal spray coatings for erosion-corrosion protection

Production, Properties, and Applications of High Temperature Coatings
2018 | Book chapter
Part of DOI: 10.4018/978-1-5225-4194-3.ch010
EID:

2-s2.0-85046598819
Contributors: Keshavamurthy, R.; Naveena, B.E.; Sekhar, N.
Source: Self-asserted source
Keshavamurthy R via Scopus - Elsevier

Wear Behaviour of Hard Chrome and Tungsten Carbide-HVOF Coatings

Materials Today: Proceedings
2018 | Conference paper
DOI: 10.1016/j.matpr.2018.10.256
EID:

2-s2.0-85058399959
Contributors: Keshavamurthy, R.; Sudhan, J.M.; Kumar, A.; Ranjan, V.; Singh, P.; Singh, A.
Source: Self-asserted source
Keshavamurthy R via Scopus - Elsevier

Erosion-corrosion behavior of aluminum based in-situ metal matrix composites

EUROCORR 2017 - The Annual Congress of the European Federation of Corrosion, 20th International Corrosion Congress and Process Safety Congress 2017
2017 | Conference paper
EID:

2-s2.0-85052295964
Contributors: Pradeep Kumar, G.S.; Ramesh, C.S.; Keshavamurthy, R.
Source: Self-asserted source
Keshavamurthy R via Scopus - Elsevier

Influence of TiO<inf>2</inf> nanoparticles incorporation to friction stir welded 5083 aluminum alloy on the microstructure, mechanical properties and wear resistance

Journal of Alloys and Compounds
2017 | Journal article
DOI: 10.1016/j.jallcom.2017.04.114
EID:

2-s2.0-85017620375
Contributors: Mirjavadi, S.S.; Alipour, M.; Emamian, S.; Kord, S.; Hamouda, A.M.S.; Koppad, P.G.; Keshavamurthy, R.
Source: Self-asserted source
Keshavamurthy R via Scopus - Elsevier

Mechanical and thermal properties of AA7075/TiO<inf>2</inf>/Fly ash hybrid composites obtained by hot forging

Progress in Natural Science: Materials International
2017 | Journal article
DOI: 10.1016/j.pnsc.2017.08.005
EID:

2-s2.0-85027678499
Contributors: Shivananda Murthy, K.V.; Girish, D.P.; Keshavamurthy, R.; Varol, T.; Koppad, P.G.
Source: Self-asserted source
Keshavamurthy R via Scopus - Elsevier
Items per page:
Page 1 of 2

Peer review (54 reviews for 20 publications/grants)

Review activity for Arabian journal for science and engineering. (1)
Review activity for Environmental technology. (1)
Review activity for IJIDEM. (1)
Review activity for IJIDEM. (1)
Review activity for International journal, advanced manufacturing technology. (1)
Review activity for Iranian polymer journal (2)
Review activity for Journal of the institution of engineers (India) series D. (12)
Review activity for Journal of the institution of engineers (India) Series D. (10)
Review activity for Journal of thermoplastic composite materials (1)
Review activity for Materials chemistry and physics. (1)
Review activity for Materials letters. (1)
Review activity for Materials research express. (2)
Review activity for Materials research. (2)
Review activity for Mechanics of advanced materials and modern processes. (2)
Review activity for Multidiscipline modeling in materials and structures. (1)
Review activity for Results in surfaces and interfaces. (3)
Review activity for SN Applied Sciences (1)
Review activity for The international journal of advanced manufacturing technology. (3)
Review activity for Tribology international. (7)
Review activity for Wear. (1)
How many people are using ORCID?