Personal information

Other IDs

Scopus Author ID: 16309743300

Activities

Collapse all

Employment (2)

Pusan National University: Kumjeong-ku, KR

2006-10-01 to present | Associate Professor (Materials Science and Engineering)
Employment
Source: Self-asserted source
Namhyun Kang

Korea Institute of Industrial Technology: Cheonan, KR

2003-06-01 to 2006-09-31 | Senior Scientist (Welding and Joining)
Employment
Source: Self-asserted source
Namhyun Kang

Education and qualifications (3)

Pennsylvania State University: University Park, PA, US

1997-09-01 to 2003-05-31 | Ph.D. (Materials Science and Engineering)
Education
Source: Self-asserted source
Namhyun Kang

Colorado School of Mines: Golden, CO, US

1995-09-01 to 1997-08-31 | M.S. (Materials Science)
Education
Source: Self-asserted source
Namhyun Kang

Pusan National University: Kumjeong-ku, KR

1989-03-01 to 1995-02-28 | B.E. (Metallurgical and Materials Engineering)
Education
Source: Self-asserted source
Namhyun Kang

Works (50 of 97)

Items per page:
Page 1 of 2

Hot-Deformed Microstructure and Texture of Ti-62222 Alloy

Metals
2025-02 | Journal article | Author
DOI: 10.3390/met15030244
Contributors: Chanho Park; Haeju Jo; Jae H. Kim; Jongtaek Yeom; Namhyun Kang; Wookjin Lee
Source: check_circle
Multidisciplinary Digital Publishing Institute

Microstructure and Corrosion Behaviors of Gas Tungsten Arc Welds for Borated Stainless Steel Using Various Filler Metals

Materials
2025-01 | Journal article | Author
DOI: 10.3390/ma18030550
Contributors: Minseok Seo; Hyunbin Nam; Yongju Yoon; Namhyun Kang; Cheolho Park
Source: check_circle
Multidisciplinary Digital Publishing Institute

Weakening the Anisotropic Property and Refining Prior-β Grains via Hammer Peening Treatment During Wire Arc Additively Manufacturing of Ti-6Al-4V

Metals
2024-11 | Journal article | Author
DOI: 10.3390/met14111261
Contributors: Guo Xian; Jingbang Pan; Junghoon Lee; Namhyun Kang
Source: check_circle
Multidisciplinary Digital Publishing Institute

Artificial Neural Network-Based Modelling for Yield Strength Prediction of Austenitic Stainless-Steel Welds

Applied Sciences
2024-05 | Journal article | Author
DOI: 10.3390/app14104224
Contributors: Sukil Park; Cheolhee Kim; Namhyun Kang
Source: check_circle
Multidisciplinary Digital Publishing Institute

Enhancement of the Corrosion Properties of Al–10%Si–2%Cu Alloys with La Addition

Materials
2024-05 | Journal article | Author
DOI: 10.3390/ma17112496
Contributors: Kyeonghun Kim; Uro Heo; Haewoong Yang; Namhyun Kang
Source: check_circle
Multidisciplinary Digital Publishing Institute

Enhancing Microstructural and Mechanical Properties of Ferrous Medium-Entropy Alloy through Cu Addition and Post-Weld Heat Treatment in Gas Tungsten Arc Welding

Materials
2023-12 | Journal article | Author
DOI: 10.3390/ma17010181
Contributors: Seong Hoon Yoo; Yoona Lee; Myeonghawn Choi; Hyunbin Nam; Sang Yong Nam; Namhyun Kang
Source: check_circle
Multidisciplinary Digital Publishing Institute

Comparison of the Magnesiothermic Reduction Behavior of Nb<sub>2</sub>O<sub>5</sub> and Ti<sub>2</sub>Nb<sub>10</sub>O<sub>29</sub>

Metals
2023-10 | Journal article | Author
DOI: 10.3390/met13101743
Contributors: Jiwon Hong; Seonmin Hwang; Namhyun Kang; Dongwon Lee
Source: check_circle
Multidisciplinary Digital Publishing Institute

Modeling Yield Strength of Austenitic Stainless Steel Welds Using Multiple Regression Analysis and Machine Learning

Metals
2023-09 | Journal article | Author
DOI: 10.3390/met13091625
Contributors: Sukil Park; Myeonghwan Choi; Dong-Yoon Kim; Cheolhee Kim; Namhyun Kang
Source: check_circle
Multidisciplinary Digital Publishing Institute

One-Step Hybrid Bending/Diffusion Bonding Process and Analysis of the Bonding Characteristics of Titanium Alloy Sheets

Materials
2023-06 | Journal article | Author
DOI: 10.3390/ma16134516
Contributors: Kang Hyun Kim; Hyeonil Park; Dong Jun Lee; Yong Nam Kwon; Namhyun Kang; Jong-Hwa Hong
Source: check_circle
Multidisciplinary Digital Publishing Institute

Effect of the Initial Grain Size on Laser Beam Weldability for High-Entropy Alloys

Crystals
2022-12 | Journal article | Author
DOI: 10.3390/cryst13010065
Contributors: Cheolho Park; Taewoo Hwang; Gi-Dong Kim; Hyunbin Nam; Namhyun Kang
Source: check_circle
Multidisciplinary Digital Publishing Institute

Microstructure and Mechanical Properties of P21-STS316L Functionally Graded Material Manufactured by Direct Energy Deposition 3D Print

Metals
2022-12 | Journal article | Author
DOI: 10.3390/met12122086
Contributors: Myeongji Jo; HYOSEONG KIM; Jeong Yeol Park; Seok Goo Lee; Byung Jun Kim; Hyoung Chan Kim; Yong Sik AHN; Byoungkoo Kim; Namhyun Kang; Daegeun Nam
Source: check_circle
Multidisciplinary Digital Publishing Institute

Artificial Neural Network Modelling of the Effect of Vanadium Addition on the Tensile Properties and Microstructure of High-Strength Tempcore Rebars

Materials
2022-05 | Journal article | Author
DOI: 10.3390/ma15113781
Contributors: woonam choi; Sungbin Won; Gil-Su Kim; Namhyun Kang
Source: check_circle
Multidisciplinary Digital Publishing Institute

Corrosion Inhibition Properties of Thiazolidinedione Derivatives for Copper in 3.5 wt.% NaCl Medium

Metals
2021-11 | Journal article | Author
DOI: 10.3390/met11111861
Contributors: Hassane LGAZ; Sourav Kr. Saha; Han-Seung Lee; Namhyun Kang; Fatima Zahra THARI; Khalid Karrouchi; Rachid Salghi; Khalid Bougrin; Ismat H. Ali
Source: check_circle
Multidisciplinary Digital Publishing Institute

Effect of Grain Size on Carburization Characteristics of the High-Entropy Equiatomic CoCrFeMnNi Alloy

Materials
2021-11 | Journal article | Author
DOI: 10.3390/ma14237199
Contributors: Hyunbin Nam; Jeongwon Kim; Namkyu Kim; Sangwoo Song; Young-Sang Na; Junho Kim; Namhyun Kang
Source: check_circle
Multidisciplinary Digital Publishing Institute

Comprehensive Analysis of Cold-Cracking Ratio for Flux-Cored Arc Steel Welds Using Y- and y-Grooves

Materials
2021-09 | Journal article | Author
DOI: 10.3390/ma14185349
Contributors: Hyunbin Nam; Jaeseok Yoo; Kwanghee Yun; Guo Xian; Hanji Park; Namkyu Kim; Sangwoo Song; Namhyun Kang
Source: check_circle
Multidisciplinary Digital Publishing Institute

Enhancement of Corrosion Properties of Fe-18Cr-9Mn-5.5Ni-0.3(C + N) Austenitic Stainless Steels by Carbon Alloying

Metals
2021-07 | Journal article | Author
DOI: 10.3390/met11071124
Contributors: Daun Byeon; Heon-Young Ha; Sung-Dae Kim; Hyo-Haeng Jo; JinJong Lee; Jae Hoon Jang; Tae-Ho Lee; Jong-Ho Shin; Namhyun Kang
Source: check_circle
Multidisciplinary Digital Publishing Institute

Assessment of Heat-Affected Zone Softening of Hot-Press-Formed Steel over 2.0 GPa Tensile Strength with Bead-On-Plate Laser Welding

Applied Sciences
2021-06 | Journal article | Author
DOI: 10.3390/app11135774
Contributors: Kwangsoo Kim; Namhyun Kang; Minjung Kang; Cheolhee Kim
Source: check_circle
Multidisciplinary Digital Publishing Institute

Hydrogen Stress Cracking Behaviour in Dissimilar Welded Joints of Duplex Stainless Steel and Carbon Steel

Metals
2021-06 | Journal article | Author
DOI: 10.3390/met11071039
Contributors: Hanji Park; Byungrok Moon; Young Hoon Moon; Namhyun Kang
Source: check_circle
Multidisciplinary Digital Publishing Institute

Effect of Electric Current Heat Treatment on Commercially Pure Titanium Sheets

Metals
2021-05 | Journal article | Author
DOI: 10.3390/met11050783
Contributors: Chan Hyeok Lee; Seong-Woo Choi; P. L. Narayana; Thi Anh Nguyet Nguyen; Sung-Tae Hong; Jae H. Kim; Namhyun Kang; Jae-Keun Hong
Source: check_circle
Multidisciplinary Digital Publishing Institute

Influence of Direct Energy Deposition Parameters on Ti–6Al–4V Component’s Structure-Property Homogeneity

Metals
2021-05 | Journal article | Author
DOI: 10.3390/met11060887
Contributors: Chan Hyeok Lee; P. L. Narayana; Seong-Woo Choi; N. S. Reddy; Jae H. Kim; Namhyun Kang; Jae-Keun Hong
Source: check_circle
Multidisciplinary Digital Publishing Institute

Microstructural Evolution and Creep Behavior of the Weld Interface between 10% Cr Steel and Haynes 282 Filler Metal

Metals
2021-05 | Journal article | Author
DOI: 10.3390/met11050764
Contributors: Namkyu Kim; Yongjoon Kang; Jinhyeok Bang; Sangwoo Song; Seong-Moon Seo; Chung-Yun Kang; Namhyun Kang
Source: check_circle
Multidisciplinary Digital Publishing Institute

Effect of Postweld Heat Treatments on Type IV Creep Failure in the Intercritical Heat-Affected Zone of 10% Cr Martensitic Steel Welded with Haynes 282 Filler

Metals
2021-04 | Journal article | Author
DOI: 10.3390/met11050726
Contributors: Namkyu Kim; Yongjoon Kang; Jinhyeok Bang; Sangwoo Song; Seong-Moon Seo; Chung-Yun Kang; Namhyun Kang
Source: check_circle
Multidisciplinary Digital Publishing Institute

GTA Weldability of Rolled High-Entropy Alloys Using Various Filler Metals

Metals
2020-10 | Journal article | Author
DOI: 10.3390/met10101371
Contributors: Hyunbin Nam; Seonghoon Yoo; Junghoon Lee; Youngsang Na; Nokeun Park; Namhyun Kang
Source: check_circle
Multidisciplinary Digital Publishing Institute

Correlation between Microstructure and Tribological Properties of Laser Surface Heat-Treated Stellite Coatings

Coatings
2020-04 | Journal article | Author
DOI: 10.3390/coatings10050433
Contributors: Chang-Kyoo Park; Jung-Hoon Lee; Namhyun Kang; Eun-Joon Chun
Source: check_circle
Multidisciplinary Digital Publishing Institute

Microstructural Evolution of Reaction Layer of 1.5 GPa Boron Steel Hot-Dipped in Al-7wt%Ni-6wt%Si Alloy

Metals
2018-12 | Journal article | Author
DOI: 10.3390/met8121069
Contributors: Jeong-Yong Lee; Hoejun Heo; Namhyun Kang; Chung-Yun Kang
Source: check_circle
Multidisciplinary Digital Publishing Institute

Effect of Martensite–Austenite Constituent on Low-Temperature Toughness in YS 500 MPa Grade Steel Welds

Metals
2018-08 | Journal article
DOI: 10.3390/met8080638
Source: check_circle
Multidisciplinary Digital Publishing Institute

Microstructural Characterization of Surface Softening Behavior for Cu-Bearing Martensitic Steels after Laser Surface Heat Treatment

Metals
2018-06 | Journal article
DOI: 10.3390/met8060470
Source: check_circle
Multidisciplinary Digital Publishing Institute

Multilayer-Forming Behavior of Cr Nitrides and Carbides for Thermoreactive Deposition

Metals
2018-05 | Journal article
DOI: 10.3390/met8060400
Source: check_circle
Multidisciplinary Digital Publishing Institute

Effect of Post Weld Heat Treatment on the Microstructure and Mechanical Properties of a Submerged-Arc-Welded 304 Stainless Steel

Metals
2018-01 | Journal article
DOI: 10.3390/met8010026
Source: check_circle
Multidisciplinary Digital Publishing Institute

The Effect of Eutectic Structure on the Creep Properties of Sn-3.0Ag-0.5Cu and Sn-8.0Sb-3.0Ag Solders

Metals
2017-12 | Journal article
DOI: 10.3390/met7120540
Source: check_circle
Multidisciplinary Digital Publishing Institute

Effect of grain boundary modification on the microstructure and magnetic properties of HDDR–treated Nd–Fe–B powders

Journal of Magnetics
2016 | Journal article
DOI: 10.4283/JMAG.2016.21.1.051
EID:

2-s2.0-84962103857
Contributors: Liu, S.; Kang, N.-H.; Yu, J.-H.; Kwon, H.-W.; Lee, J.-G.
Source: Self-asserted source
Namhyun Kang via Scopus - Elsevier

Effect of preheat temperature and microstructure on cold cracking in 600 MPa grade flux cored arc weld metal

Journal of Korean Institute of Metals and Materials
2016 | Journal article
DOI: 10.3365/KJMM.2016.54.4.252
EID:

2-s2.0-84971220828
Contributors: Lee, M.; Cho, K.; Kang, N.
Source: Self-asserted source
Namhyun Kang via Scopus - Elsevier

Effects of inclusion size and acicular ferrite on cold cracking for high-strength steel welds of YS 600 MPa grade

Science and Technology of Welding and Joining
2016 | Journal article
DOI: 10.1080/13621718.2016.1178833
EID:

2-s2.0-84978525759
Contributors: Lee, M.; KanG, N.; Liu, S.; Cho, K.
Source: Self-asserted source
Namhyun Kang via Scopus - Elsevier

Anisotropic nanocrystalline Nd-Fe-B based magnets producedby spark plasma sintered technique

2015 IEEE International Magnetics Conference, INTERMAG 2015
2015 | Conference paper
DOI: 10.1109/INTMAG.2015.7157453
EID:

2-s2.0-84942474775
Contributors: Liu, S.; Kang, N.; Feng, L.; Yu, J.; Lee, J.
Source: Self-asserted source
Namhyun Kang via Scopus - Elsevier

Anisotropic Nanocrystalline Nd-Fe-B-Based Magnets Produced by Spark Plasma Sintering Technique

IEEE Transactions on Magnetics
2015 | Journal article
DOI: 10.1109/TMAG.2015.2439672
EID:

2-s2.0-84946103825
Contributors: Liu, S.; Kang, N.-H.; Feng, L.; Lee, S.-H.; Yu, J.-H.; Lee, J.-G.
Source: Self-asserted source
Namhyun Kang via Scopus - Elsevier

Effect of martensite on cold cracking in 600-MPa grade flux-cored arc weld metals using the Y-groove test

Welding in the World
2015 | Journal article
DOI: 10.1007/s40194-015-0240-5
EID:

2-s2.0-84938506200
Contributors: Lee, M.; Cho, K.; Kim, Y.; Kang, N.
Source: Self-asserted source
Namhyun Kang via Scopus - Elsevier

Effects of the aging temperature and stress relaxation conditions on γ' precipitation in Inconel X-750

Journal of Nuclear Materials
2015 | Journal article
DOI: 10.1016/j.jnucmat.2014.11.093
EID:

2-s2.0-84919800803
Contributors: Ha, J.W.; Seong, B.S.; Jeong, H.W.; Choi, Y.S.; Kang, N.
Source: Self-asserted source
Namhyun Kang via Scopus - Elsevier

Anomalous multiple pop-in behavior in Cu-Sn-based intermetallic compounds during nanoindentation

Materials Science and Engineering A
2014 | Journal article
DOI: 10.1016/j.msea.2014.06.048
EID:

2-s2.0-84903721491
Contributors: Jun, H.; Kim, Y.; Lee, S.; Kang, N.; Kim, K.-B.; Kim, M.; Hyung Kim, S.; Lee, D.
Source: Self-asserted source
Namhyun Kang via Scopus - Elsevier

Effect of cold drawing ratio on γ′ precipitation in Inconel X-750

Materials Characterization
2014 | Journal article
DOI: 10.1016/j.matchar.2014.07.016
EID:

2-s2.0-84905056816
Contributors: Ha, J.W.; Seong, B.S.; Jeong, H.W.; Yoo, Y.S.; Choi, Y.S.; Kang, N.
Source: Self-asserted source
Namhyun Kang via Scopus - Elsevier

Effect of martensite-austenite constituent under simulated welding conditions on low-temperature toughness and microstructure of SMYS 500-MPa-class offshore structural steel plate

Proceedings of the International Offshore and Polar Engineering Conference
2014 | Conference paper
EID:

2-s2.0-84906905609
Contributors: Kim, I.; Jo, S.-J.; Jo, S.-C.; Kang, K.-B.; Kang, N.-H.
Source: Self-asserted source
Namhyun Kang via Scopus - Elsevier

Effect of Sb addition on Bi-2.6Ag-0.1Cu solders for high-temperature applications

Journal of Alloys and Compounds
2014 | Journal article
DOI: 10.1016/j.jallcom.2013.12.252
EID:

2-s2.0-84893173770
Contributors: Kim, B.; Lee, C.-W.; Lee, D.; Kang, N.
Source: Self-asserted source
Namhyun Kang via Scopus - Elsevier

Effect of strength grades of dual phase steels on failure location and joint efficiency of GMAW lap joints

Journal of Korean Institute of Metals and Materials
2014 | Journal article
DOI: 10.3365/KJMM.2014.52.4.319
EID:

2-s2.0-84899000214
Contributors: Kim, J.-W.; Kang, N.-H.; Park, Y.-D.; Kim, D.-C.; Kane, M.-J.
Source: Self-asserted source
Namhyun Kang via Scopus - Elsevier

Effect of the tempered martensite matrix and granular bainite on stretch-flangeability for 980 MPa hot-rolled steel

Journal of Korean Institute of Metals and Materials
2014 | Journal article
DOI: 10.3365/KJMM.2014.52.2.113
EID:

2-s2.0-84896819076
Contributors: Lee, J.; Lee, M.; Do, H.; Kim, S.; Kang, N.
Source: Self-asserted source
Namhyun Kang via Scopus - Elsevier

Influence of annealing on the interface-correlated mechanical properties of a Ti/STS clad sheet

Journal of Korean Institute of Metals and Materials
2014 | Journal article
DOI: 10.3365/KJMM.2014.52.11.881
EID:

2-s2.0-84923373031
Contributors: Jo, Y.M.; Lee, K.S.; Kang, N.; Lee, Y.-S.
Source: Self-asserted source
Namhyun Kang via Scopus - Elsevier

Study of secondary recrystallization in Mg-Sn binary alloy

Journal of Korean Institute of Metals and Materials
2014 | Journal article
DOI: 10.3365/KJMM.2014.52.6.429
EID:

2-s2.0-84902953510
Contributors: Kim, S.G.; Kang, J.Y.; Ha, H.Y.; Park, N.J.; Yim, C.D.; Kang, N.H.
Source: Self-asserted source
Namhyun Kang via Scopus - Elsevier

Effect of beta stabilizer content on young's moduli of titanium alloys with similar electronic states

Journal of Korean Institute of Metals and Materials
2013 | Journal article
DOI: 10.3365/KJMM.2013.51.4.307
EID:

2-s2.0-84876583896
Contributors: Yoo, G.Y.; Park, C.H.; Hong, J.-K.; Kim, S.-E.; Kang, N.H.; Yeom, J.-T.
Source: Self-asserted source
Namhyun Kang via Scopus - Elsevier

Effect of nanocarbides and interphase hardness deviation on stretch-flangeability in 998 MPa hot-rolled steels

Materials Chemistry and Physics
2013 | Journal article
DOI: 10.1016/j.matchemphys.2013.03.041
EID:

2-s2.0-84877575930
Contributors: Joon Chun, E.; Do, H.; Kim, S.; Nam, D.-G.; Park, Y.-H.; Kang, N.
Source: Self-asserted source
Namhyun Kang via Scopus - Elsevier

Effect of nano-carbide formation on hydrogen-delayed fracture for quenching and tempering steels during high-frequency induction heat treatment

Materials Science and Engineering A
2012 | Journal article
DOI: 10.1016/j.msea.2012.02.008
EID:

2-s2.0-84862814761
Contributors: Kang, H.J.; Yoo, J.S.; Park, J.T.; Ahn, S.T.; Kang, N.; Cho, K.-M.
Source: Self-asserted source
Namhyun Kang via Scopus - Elsevier

Effects of coiling temperature and carbides behavior on stretch-flangeability for 980 MPa hot-rolled steels

Journal of Korean Institute of Metals and Materials
2012 | Journal article
DOI: 10.3365/KJMM.2012.50.7.487
EID:

2-s2.0-84864409437
Contributors: Chun, E.-J.; Lee, J.-S.; Do, H.; Kim, S.-J.; Choi, Y.-S.; Park, Y.-H.; Kang, N.
Source: Self-asserted source
Namhyun Kang via Scopus - Elsevier

Effects of furnace atmosphere on selective oxidation behaviour of Si-added transformation-induced plasticity steels

Metals and Materials International
2012 | Journal article
DOI: 10.1007/s12540-012-6006-3
EID:

2-s2.0-84879643731
Contributors: Lee, S.-K.; Kim, J.-S.; Kang, N.; Cho, K.-M.
Source: Self-asserted source
Namhyun Kang via Scopus - Elsevier
Items per page:
Page 1 of 2

Peer review (18 reviews for 4 publications/grants)

Review activity for Corrosion science. (9)
Review activity for Materials characterization. (3)
Review activity for Metals and Materials International. (5)
Review activity for Nature communications (1)
How many people are using ORCID?