Personal information

Other IDs

Scopus Author ID: 57191829845
GND: 1165324288
SciProfiles: 2314757

Activities

Collapse all

Employment (2)

CeWOTec gGmbH: Chemnitz, DE

2023 to present | Brazing Expert
Employment
Source: Self-asserted source
Thomas Uhlig

Chemnitz University of Technology: Chemnitz, DE

2012 to 2022 | Scientist (Mechanical Engineering)
Employment
Source: Self-asserted source
Thomas Uhlig

Works (25)

Effects of local gas shielding on induction brazing of stainless steel: an experimental approach

Welding in the World
2024-11-28 | Journal article
DOI: 10.1007/s40194-024-01892-5
Contributors: S. Weis; R. Grunert; V. Fedorov; S. Brumm; T. Uhlig
Source: check_circle
Crossref

Wear and Corrosion Resistant Eutectic High-Entropy Alloy Al0.3CoCrFeNiMo0.75 Produced by Laser Metal Deposition and Spark-Plasma Sintering

Journal of Thermal Spray Technology
2024-03 | Journal article
DOI: 10.1007/s11666-024-01711-9
Contributors: B. Preuß; T. Lindner; T. Uhlig; T. Mehner; G. Töberling; G. Wagner; T. Lampke
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Fabrication of Single-Crystalline CoCrFeNi Thin Films by DC Magnetron Sputtering: A Route to Surface Studies of High-Entropy Alloys

Advanced Materials
2023 | Journal article
DOI: 10.1002/adma.202301526
EID:

2-s2.0-85165287770

Part of ISSN: 15214095 09359648
Contributors: Schwarz, H.; Apell, J.; Wong, H.K.; Henning, P.; Wonneberger, R.; Rösch, N.; Uhlig, T.; Ospald, F.; Wagner, G.; Undisz, A. et al.
Source: Self-asserted source
Thomas Uhlig via Scopus - Elsevier

Niobium and Molybdenum as Alloying Constituents in Al<sub>0.3</sub>CoCrFeNi to Develop Eutectic High-Entropy Alloys for HVOF Spraying

Journal of Thermal Spray Technology
2023 | Journal article
DOI: 10.1007/s11666-022-01417-w
EID:

2-s2.0-85134314443

Part of ISSN: 15441016 10599630
Contributors: Preuß, B.; Lindner, T.; Uhlig, T.; Wagner, G.; Lampke, T.
Source: Self-asserted source
Thomas Uhlig via Scopus - Elsevier

Microstructure and Mechanical Properties of AA 6082/AISI 304 Joints Brazed Using Al-Ge-Si Filler Metal

Metals
2023-09-08 | Journal article
DOI: 10.3390/met13091574
Contributors: Vasilii Fedorov; Thomas Uhlig; Guntram Wagner
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Microstructure Evolution and Wear Resistance of the Eutectic High-Entropy Alloy Al0.3CoCrFeNiNb0.5 Produced by Laser Metal Deposition

Coatings
2023-03-08 | Journal article
DOI: 10.3390/coatings13030585
Contributors: Bianca Preuß; Thomas Lindner; Thomas Uhlig; Jorge Eduardo Tapia Cabrera; Holger Schwarz; Guntram Wagner; Thomas Seyller; Thomas Lampke
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Structure–Property Relationship in High-Strength Aluminum Alloys/Stainless Steel Brazed Joints

Metals
2023-01-27 | Journal article
DOI: 10.3390/met13020242
Contributors: Vasilii Fedorov; Thomas Uhlig; Guntram Wagner
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Surface hardening in finishing of sintered and thermal sprayed X120Mn12

Procedia CIRP
2022 | Conference paper
DOI: 10.1016/j.procir.2022.03.038
EID:

2-s2.0-85134592199

Part of ISSN: 22128271
Contributors: Liborius, H.; Lindner, T.; Nestler, A.; Uhlig, T.; Lampke, T.; Wagner, G.; Schubert, A.
Source: Self-asserted source
Thomas Uhlig via Scopus - Elsevier

Hardness Enhancement in CoCrFeNi1−x(WC)x High-Entropy Alloy Thin Films Synthesised by Magnetron Co-Sputtering

Coatings
2022-02-17 | Journal article
DOI: 10.3390/coatings12020269
Contributors: Holger Schwarz; Thomas Uhlig; Thomas Lindner; Thomas Lampke; Guntram Wagner; Thomas Seyller
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Influence of the composition of thermally sprayed (Al)CoCrFeNi(Mo) high-entropy alloy coatings in face turning and diamond smoothing

Proceedings of the 21st International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2021
2021 | Conference paper
EID:

2-s2.0-85109209443

Part of ISBN: 9780995775190
Contributors: Liborius, H.; Nestler, A.; Löbel, M.; Lindner, T.; Uhlig, T.; Schubert, A.; Lampke, T.; Wagner, G.
Source: Self-asserted source
Thomas Uhlig via Scopus - Elsevier

Influence of the Thickness of the Reaction Zone in Aluminum/Stainless Steel Brazed Joints on the Mechanical Properties

Metals
2021 | Journal article
DOI: 10.3390/met11020217
Part of ISSN: 2075-4701
Source: Self-asserted source
Thomas Uhlig
grade
Preferred source (of 4)‎

Development of Rapidly-Quenched Al-Ge-Si Filler Alloys for the Joining of Stainless Steel AISI 304 and Aluminum Alloy AA6082

Metals
2021-11-29 | Journal article
DOI: 10.3390/met11121926
Contributors: Alexander Ivannikov; Vasilii Fedorov; Anton Abramov; Milena Penyaz; Diana Bachurina; Thomas Uhlig; Alexey Suchkov; Guntram Wagner; Pavel Morokhov; Oleg Sevryukov
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

CoCrFeNi High-Entropy Alloy Thin Films Synthesised by Magnetron Sputter Deposition from Spark Plasma Sintered Targets

Coatings
2021-04-17 | Journal article
DOI: 10.3390/coatings11040468
Contributors: Holger Schwarz; Thomas Uhlig; Niels Rösch; Thomas Lindner; Fabian Ganss; Olav Hellwig; Thomas Lampke; Guntram Wagner; Thomas Seyller
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Microstructural Study of Al-Ag-Cu-Si Filler Metal for Brazing High-Strength Aluminum Alloys to Stainless Steel

Metals
2020-11-24 | Journal article
DOI: 10.3390/met10121563
Contributors: Vasilii Fedorov; Thomas Uhlig; Harry Podlesak; Guntram Wagner
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Influence of nitrogen in brazing atmospheres on the hardness of the microstructural constituents of brazed stainless steel joints

IOP Conference Series: Materials Science and Engineering
2019 | Conference paper
DOI: 10.1088/1757-899X/480/1/012034
EID:

2-s2.0-85063777033

Part of ISBN:

1757899X 17578981
Contributors: Fedorov, V.; Uhlig, T.; Wagner, G.; Langohr, A.; Holländer, U.
Source: Self-asserted source
Thomas Uhlig via Scopus - Elsevier

Investigation of fatigue damage in aluminum/stainless steel brazed joints

Welding in the World
2018 | Journal article
DOI: 10.1007/s40194-017-0542-x
EID:

2-s2.0-85060335129

Part of ISBN:

00432288
Contributors: Fedorov, V.; Uhlig, T.; Wagner, G.
Source: Self-asserted source
Thomas Uhlig via Scopus - Elsevier
grade
Preferred source (of 2)‎

Investigation on the influence of nitrogen in process atmospheres on the corrosion behavior of brazed stainless steel joints

IOP Conference Series: Materials Science and Engineering
2018 | Conference paper
DOI: 10.1088/1757-899X/373/1/012022
EID:

2-s2.0-85049411866

Part of ISBN:

1757899X 17578981
Contributors: Fedorov, V.; Uhlig, T.; Wagner, G.; Langohr, A.; Holländer, U.
Source: Self-asserted source
Thomas Uhlig via Scopus - Elsevier

Neuartige Co-Basislote zum Hochtemperaturlöten thermisch stark belasteter Bauteile

2018 | Dissertation or Thesis
DNB: 1214819508
URN: urn:nbn:de:bsz:ch1-qucosa2-212534
Contributors: Thomas Uhlig; Guntram Wagner; Guntram Wagner; Olaf Keßler
Source: Self-asserted source
Thomas Uhlig via Deutsche Nationalbibliothek (DNB)

Interfacial microstructure and mechanical properties of brazed aluminum / stainless steel - Joints

IOP Conference Series: Materials Science and Engineering
2017 | Conference paper
DOI: 10.1088/1757-899X/181/1/012009
EID:

2-s2.0-85016578403
Contributors: Fedorov, V.; Elßner, M.; Uhlig, T.; Wagner, G.
Source: Self-asserted source
Thomas Uhlig via Scopus - Elsevier

Joining of aluminum and stainless steel using AlSi10 brazing filler: Microstructure and mechanical properties

AIP Conference Proceedings
2017 | Conference paper
DOI: 10.1063/1.4989949
EID:

2-s2.0-85025810634

Part of ISBN:

15517616 0094243X
Contributors: Fedorov, V.; Uhlig, T.; Wagner, G.
Source: Self-asserted source
Thomas Uhlig via Scopus - Elsevier

Properties of newly developed Co-based brazing fillers

Welding in the World
2017 | Journal article
DOI: 10.1007/s40194-016-0388-7
EID:

2-s2.0-85008870532
Contributors: Uhlig, T.; Weis, S.; Wielage, B.; Wagner, G.; Schuberth, S.
Source: Self-asserted source
Thomas Uhlig via Scopus - Elsevier

Reduction of liquid metal embrittlement in copper-brazed stainless steel joints

IOP Conference Series: Materials Science and Engineering
2017 | Conference paper
DOI: 10.1088/1757-899X/181/1/012032
EID:

2-s2.0-85016645754
Contributors: Uhlig, T.; Fedorov, V.; Elßner, M.; Wagner, G.; Weis, S.
Source: Self-asserted source
Thomas Uhlig via Scopus - Elsevier

Development of alloys with high impact and abrasion resistance for wear-resistant weld overlays

Welding and Cutting
2016 | Other
EID:

2-s2.0-84994021823
Contributors: Schuberth, S.; Weis, S.; Uhlig, T.; Wagner, G.; Wielage, B.
Source: Self-asserted source
Thomas Uhlig via Scopus - Elsevier

High-Temperature Corrosion and Radiation Characteristics of Thermal Sprayed Molybdenum Disilicide-Based Coatings

IOP Conference Series: Materials Science and Engineering
2016 | Conference paper
DOI: 10.1088/1757-899X/118/1/012007
EID:

2-s2.0-84971612228
Contributors: Weis, S.; Uhlig, T.; Wagner, G.; Lampke, T.; Bauer, W.; Moldenhauer, A.
Source: Self-asserted source
Thomas Uhlig via Scopus - Elsevier

High-temperature oxidation-resistant thermal spray coatings based on MoSi2 for furnace applications

Proceedings of the International Thermal Spray Conference
2013 | Conference paper
EID:

2-s2.0-84907084958
Contributors: Schuberth, S.; Uhlig, T.; Pokhmurska, H.; Rupprecht, C.; Lampke, T.
Source: Self-asserted source
Thomas Uhlig via Scopus - Elsevier

Peer review (1 review for 1 publication/grant)

Review activity for Welding in the world. (1)
How many people are using ORCID?