Personal information

Emails & domains

Verified email domains

Other IDs

Scopus Author ID: 35919793200

Countries

New Zealand, Germany, Luxembourg

Activities

Collapse all

Employment (6)

Luxembourg Institute of Science and Technology: Hautcharage, LU

2022-01-01 to present | Senior R&D Associate (Functional Polymers Unit)
Employment
Source: Self-asserted source
Tim Huber

University of Canterbury: Christchurch, NZ

2014-02-24 to present | Senior Lecturer (School of Product Design)
Employment
Source: check_circle
University of Canterbury

University of Canterbury: Christchurch, NZ

2014-02-25 to 2018-02-17 | Postdoctoral Fellow (Chemical and Process Engineering/Biomolecular Interaction Centre)
Employment
Source: Self-asserted source
Tim Huber

University of Guelph: Guelph, ON, CA

2013-05-01 to 2014-01-31 | Postdoctoral Fellow (Plant Angriculture)
Employment
Source: Self-asserted source
Tim Huber

University of Canterbury: Christchurch, NZ

2012-08-01 to 2013-03-31 | Research Fellow (Mechanical Engineering)
Employment
Source: Self-asserted source
Tim Huber

University of Applied Sciences Bremen: Bremen, DE

2007-08-01 to 2008-12-31 | Research Assistant
Employment
Source: Self-asserted source
Tim Huber

Education and qualifications (3)

University of Canterbury: Christchurch, NZ

2018-02-21 to 2020-04-19 | Postgraduate Certificate in Tertiary Education
Qualification
Source: Self-asserted source
Tim Huber

University of Canterbury: Christchurch, NZ

2009-02-01 to 2013-03-31 | PhD (Mechanical Engineering)
Education
Source: Self-asserted source
Tim Huber

Bremen University of Applied Sciences: Bremen, DE

2004-10-15 to 2007-02-28 | Bachelor of Science
Education
Source: Self-asserted source
Tim Huber

Professional activities (5)

Biomolecular Interaction Centre: Christchurch, NZ

2018-02-01 to present | Assoicate Investigator
Membership
Source: Self-asserted source
Tim Huber

Designers Institute New Zealand: Christchurch, NZ

2021-04-01 to 2022-03-31
Membership
Source: Self-asserted source
Tim Huber

Kiwinet: Christchurch, NZ

2021-11-02 | Innovation Jumpstart Award (School of Product Design)
Distinction
Source: Self-asserted source
Tim Huber

Kiwinet: Christchurch, NZ

2017-10-10 | Tech Jumpstart Competition winner
Distinction
Source: Self-asserted source
Tim Huber

International Association of Advanced Materials (IAAM) : Stockholm, SE

2016-06-15 | Scientist Medal for notable and outstanding research in Advanced Materials Science & Technology
Distinction
Source: Self-asserted source
Tim Huber

Funding (10)

The Design Competition: Fostering Sustainability and Innovation in Material-Centred Design - GUIDANCE

2024-11 to 2027-10 | Grant
FNR (Luxembourg, LU)
GRANT_NUMBER:

18882287
Source: Self-asserted source
Tim Huber

Ballistic armor from biofibers - SAFER

2023-08 to 2026-07 | Grant
FNR (Luxembourg, LU)
GRANT_NUMBER:

DEFENCE22/MS/17737614
Source: Self-asserted source
Tim Huber

Ministry of Business, Innovation & Employment

2021-02 to 2024-01 | Grant
Callaghan Innovation (Welingotn, NZ)
GRANT_NUMBER:

2020-S9-CRS
Source: Self-asserted source
Tim Huber

Amiomio Aotearoa a circular economy for the wellbeing of New Zealand

2020-10 to 2025-09 | Grant
Ministry of Business, Innovation and Employment (Wellington, NZ)
GRANT_NUMBER:

UOWX2004
Source: Self-asserted source
Tim Huber

NSC SfTI: Weaving Maori culture into natural fibre reinforced composites

2020-08 to 2022-07 | Grant
Callaghan Innovation (Wellington, NZ)
GRANT_NUMBER:

UOCX2003
Source: Self-asserted source
Tim Huber

3D printed porous media

2019-10 to 2024-09 | Grant
Ministry of Business, Innovation and Employment (Wellington, NZ)
GRANT_NUMBER:

UOCX1903
Source: Self-asserted source
Tim Huber

High-speed manufacture of scaffolds for the production of cultured meat

2019-08 to 2019-12 | Grant
University of Canterbury (Christchurch, NZ)
Source: Self-asserted source
Tim Huber

3D printing protein-scaffolds

2019-06 to 2019-12 | Grant
Biomolecular Interaction Centre, University of Canterbury (Christchurch, NZ)
Source: Self-asserted source
Tim Huber

An Interactive Mixed Reality Aid for Materials Science Learning

2018-07 to 2018-12 | Grant
University of Canterbury (Christchurch, NZ)
Source: Self-asserted source
Tim Huber

Development of a Mātauranga Māori materials library for product design

Grant
College of Engineering University of Canterbury (Christchurch, NZ)
Source: Self-asserted source
Tim Huber

Works (32)

Designing with biobased composites: understanding digital material perception through semiotic attributes

Design Science
2023 | Journal article
DOI: 10.1017/dsj.2023.5
Contributors: Manu Thundathil; Ali Reza Nazmi; Bahareh Shahri; Nick Emerson; Jörg Müssig; Tim Huber
Source: check_circle
Crossref

Visual–Tactile Perception of Biobased Composites

Materials
2023-02-23 | Journal article
DOI: 10.3390/ma16051844
Contributors: Manu Thundathil; Ali Reza Nazmi; Bahareh Shahri; Nick Emerson; Jörg Müssig; Tim Huber
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Biocomposites: A review of materials and perception

Materials Today Communications
2022-06 | Journal article
DOI: 10.1016/j.mtcomm.2022.103308
Part of ISSN: 2352-4928
Source: Self-asserted source
Tim Huber

Improving Material Property Understanding with Virtual Experiments: A New Approach to Teach About Mechanical Testing of Materials Using an Interactive Desktop App

Journal of Chemical Education
2022-02-08 | Journal article
DOI: 10.1021/acs.jchemed.1c01087
Contributors: Jonas Schmidt; Tim Huber; Jörg Müssig
Source: check_circle
Crossref

A Novel Additive Manufacturing Method of Cellulose Gel

Materials
2021-11-18 | Journal article
DOI: 10.3390/ma14226988
Contributors: Hossein Najaf Zadeh; Daniel Bowles; Tim Huber; Don Clucas
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Printed monolith adsorption as an alternative to expanded bed adsorption for purifying M13 bacteriophage

Journal of Chromatography A
2021-08 | Journal article
DOI: 10.1016/j.chroma.2021.462365
Part of ISSN: 0021-9673
Source: Self-asserted source
Tim Huber

COMFlex: An Adaptive Haptic Interface with Shape-Changing and Weight-Shifting Mechanism for Immersive Virtual Reality

Asian CHI Symposium 2021
2021-05-08 | Conference paper
DOI: 10.1145/3429360.3468214
ISBN: 9781450382038
Source: Self-asserted source
Tim Huber

3D-printed ordered bed structures for chromatographic purification of enveloped and non-enveloped viral particles

Separation and Purification Technology
2021-01 | Journal article
DOI: 10.1016/j.seppur.2020.117681
Part of ISSN: 1383-5866
Source: Self-asserted source
Tim Huber

Effect of CNC machining on sensory properties of native and non-native timbers

MADE 2020, Auckland, NZ
2020-12-07 | Conference abstract
Source: Self-asserted source
Tim Huber

Imparting Materials Science Knowledge in the Field of the Crystal Structure of Metals in Times of Online Teaching: A Novel Online Laboratory Teaching Concept with an Augmented Reality Application

Journal of Chemical Education
2020-09-08 | Journal article
DOI: 10.1021/acs.jchemed.0c00763
Contributors: Jörg Müssig; Adrian Clark; Simon Hoermann; Giuseppe Loporcaro; Claudio Loporcaro; Tim Huber
Source: check_circle
Crossref

Complex Geometry Cellulose Hydrogels Using a Direct Casting Method

Bioengineering
2020-06-16 | Journal article
DOI: 10.3390/bioengineering7020058
Contributors: Hossein Najaf Zadeh; Tim Huber; Volker Nock; Conan Fee; Don Clucas
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

3D Printing of Gelled and Cross-Linked Cellulose Solutions; an Exploration of Printing Parameters and Gel Behaviour

Bioengineering
2020-03-27 | Journal article
DOI: 10.3390/bioengineering7020030
Contributors: Tim Huber; Hossein Najaf Zadeh; Sean Feast; Thea Roughan; Conan Fee
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Analysis of the Effect of Processing Conditions on Physical Properties of Thermally Set Cellulose Hydrogels

Materials
2019-04 | Journal article | Author
DOI: 10.3390/ma12071066
Contributors: Tim Huber; Sean Feast; Simone Dimartino; Wanwen Cen; Conan Fee
Source: check_circle
Multidisciplinary Digital Publishing Institute

Separation Medium

2018-12 | Other
Source: Self-asserted source
Tim Huber

3D Printing Cellulose Hydrogels Using LASER Induced Thermal Gelation

Journal of Manufacturing and Materials Processing
2018-07 | Journal article
DOI: 10.3390/jmmp2030042
Source: check_circle
Multidisciplinary Digital Publishing Institute

Shear-electrospinning: extending the electrospinnability range of polymer solutions

Journal of Materials Science
2016 | Journal article
DOI: 10.1007/s10853-016-9955-y
EID:

2-s2.0-84963717872
Contributors: LeCorre-Bordes, D.; Tucker, N.; Huber, T.; Buunk, N.; Staiger, M.P.
Source: Self-asserted source
Tim Huber via Scopus - Elsevier

Surface tension of concentrated cellulose solutions in 1-ethyl-3-methylimidazolium acetate

Cellulose
2016 | Journal article
DOI: 10.1007/s10570-015-0850-5
EID:

2-s2.0-84955578172
Contributors: Schuermann, J.; Huber, T.; LeCorre, D.; Mortha, G.; Sellier, M.; Duchemin, B.; Staiger, M.P.
Source: Self-asserted source
Tim Huber via Scopus - Elsevier

Three-dimensional braiding of continuous regenerated cellulose fibres

Journal of Industrial Textiles
2016 | Journal article
DOI: 10.1177/1528083714540695
EID:

2-s2.0-84962565835
Contributors: Huber, T.; Kuckhoff, B.; Gries, T.; Veit, D.; Pang, S.; Graupner, N.; Müssig, J.; Staiger, M.P.
Source: Self-asserted source
Tim Huber via Scopus - Elsevier

Biochar and its size effects on polyamide 6/biochar composites

Proceedings of the American Society for Composites - 30th Technical Conference, ACS 2015
2015 | Conference paper
EID:

2-s2.0-84966471276
Contributors: Huber, T.; Misra, M.; Mohanty, A.K.
Source: Self-asserted source
Tim Huber via Scopus - Elsevier

The effect of particle size on the rheological properties of polyamide 6/biochar composites

AIP Conference Proceedings
2015 | Conference paper
DOI: 10.1063/1.4918500
EID:

2-s2.0-84984568116
Contributors: Huber, T.; Misra, M.; Mohanty, A.K.
Source: Self-asserted source
Tim Huber via Scopus - Elsevier

Biodegradability of all-cellulose composite laminates

Composites Part A: Applied Science and Manufacturing
2014 | Journal article
DOI: 10.1016/j.compositesa.2013.12.012
EID:

2-s2.0-84892692381
Contributors: Kalka, S.; Huber, T.; Steinberg, J.; Baronian, K.; Müssig, J.; Staiger, M.P.
Source: Self-asserted source
Tim Huber via Scopus - Elsevier

Mechanical properties of compatibilized nylon 6/polypropylene blends; Studies of the interfacial behavior through an emulsion model

Journal of Applied Polymer Science
2014 | Journal article
DOI: 10.1002/app.40792
EID:

2-s2.0-84902547702
Contributors: Huber, T.; Misra, M.; Mohanty, A.K.
Source: Self-asserted source
Tim Huber via Scopus - Elsevier

Flexural and impact properties of all-cellulose composite laminates

Composites Science and Technology
2013 | Journal article
DOI: 10.1016/j.compscitech.2013.08.040
EID:

2-s2.0-84884717269
Contributors: Huber, T.; Bickerton, S.; Müssig, J.; Pang, S.; Staiger, M.P.
Source: Self-asserted source
Tim Huber via Scopus - Elsevier

A critical review of all-cellulose composites

Journal of Materials Science
2012 | Journal article
DOI: 10.1007/s10853-011-5774-3
EID:

2-s2.0-84855498023
Contributors: Huber, T.; Müssig, J.; Curnow, O.; Pang, S.; Bickerton, S.; Staiger, M.P.
Source: Self-asserted source
Tim Huber via Scopus - Elsevier

All-cellulose composite laminates

Composites Part A: Applied Science and Manufacturing
2012 | Journal article
DOI: 10.1016/j.compositesa.2012.04.017
EID:

2-s2.0-84865623285
Contributors: Huber, T.; Pang, S.; Staiger, M.P.
Source: Self-asserted source
Tim Huber via Scopus - Elsevier

Solvent infusion processing of all-cellulose composite materials

Carbohydrate Polymers
2012 | Journal article
DOI: 10.1016/j.carbpol.2012.05.047
EID:

2-s2.0-84864137524
Contributors: Huber, T.; Bickerton, S.; Müssig, J.; Pang, S.; Staiger, M.P.
Source: Self-asserted source
Tim Huber via Scopus - Elsevier

Impact and flexural strength of rayon based all-cellulose composite laminates

ICCM International Conferences on Composite Materials
2011 | Conference paper
EID:

2-s2.0-84875941121
Contributors: Huber, T.; Bickerton, S.; Müssig, J.; Staiger, M.P.
Source: Self-asserted source
Tim Huber via Scopus - Elsevier

Composites

Industrial Applications of Natural Fibres: Structure, Properties and Technical Applications
2010 | Book
DOI: 10.1002/9780470660324.ch19
EID:

2-s2.0-84886499300
Contributors: Hänninen, T.; Hughes, M.; Baur, E.; Otremba, F.; Huber, T.; Graupner, N.; Müssig, J.; Prömper, E.; van den Oever, M.; Bos, H. et al.
Source: Self-asserted source
Tim Huber via Scopus - Elsevier

Enhancing the fibre matrix adhesion of natural fibre reinforced polypropylene by electron radiation analyzed with the single fibre fragmentation test

Composite Interfaces
2010 | Journal article
DOI: 10.1163/092764410X495270
EID:

2-s2.0-77952357756
Contributors: Huber, T.; Biedermann, U.; Müssig, J.
Source: Self-asserted source
Tim Huber via Scopus - Elsevier

As tough as it is delicious? A mechanical and structural analysis of red rhubarb (Rheum rhabarbarum)

Journal of Materials Science
2009 | Journal article
DOI: 10.1007/s10853-009-3556-y
EID:

2-s2.0-70349573001
Contributors: Huber, T.; Graupner, N.; Müssig, J.
Source: Self-asserted source
Tim Huber via Scopus - Elsevier

Fibre matrix adhesion of natural fibres cotton, flax and hemp in polymeric matrices analyzed with the single fibre fragmentation test

Composite Interfaces
2008 | Journal article
DOI: 10.1163/156855408783810948
EID:

2-s2.0-40549106158
Contributors: Huber, T.; Müssig, J.
Source: Self-asserted source
Tim Huber via Scopus - Elsevier

Natural Reinforcement

Kunststoffe International
2008 | Other
EID:

2-s2.0-47749156392
Contributors: Huber, T.; Müssig, J.; Baur, E.; Otremba, F.
Source: Self-asserted source
Tim Huber via Scopus - Elsevier
How many people are using ORCID?