Personal information

Other IDs

ResearcherID: GWU-9122-2022
Scopus Author ID: 57219325595

Activities

Collapse all

Works (33)

Mechanical properties of 3D printed denture base polymers

The Journal of Prosthetic Dentistry
2025-03 | Journal article
DOI: 10.1016/j.prosdent.2025.02.009
Contributors: Andrea Coldea; Felicitas Mayinger; John Meinen; Moritz Hoffmann; Bogna Stawarczyk
Source: check_circle
Crossref

Fracture toughness, work of fracture, flexural strength and elastic modulus of 3D-printed denture base resins in two measurement environments after artificial aging

Journal of the Mechanical Behavior of Biomedical Materials
2024 | Journal article
DOI: 10.1016/J.JMBBM.2023.106234
WOSUID: WOS:001124893300001
Contributors: Geiger, Veronika; Mayinger, Felicitas; Hoffmann, Moritz; Reymus, Marcel; Stawarczyk, Bogna
Source: check_circle
Web of Science Researcher Profile Sync
grade
Preferred source (of 2)‎

Impact of the sintering parameters on the grain size, crystal phases, translucency, biaxial flexural strength, and fracture load of zirconia materials

Journal of the Mechanical Behavior of Biomedical Materials
2024 | Journal article
DOI: 10.1016/J.JMBBM.2024.106580
WOSUID: WOS:001294691800001
Contributors: Mayinger, Felicitas; Ender, Andreas; Strickstrock, Monika; Elsayed, Adham; Zadeh, Parissa Nassary; Zimmermann, Marcus; Stawarczyk, Bogna
Source: check_circle
Web of Science Researcher Profile Sync
grade
Preferred source (of 2)‎

Impact of varnishing, coating, and polishing on the chemical and mechanical properties of a 3D printed resin and two veneering composite resins

The Journal of Prosthetic Dentistry
2024 | Journal article
DOI: 10.1016/J.PROSDENT.2024.05.006
WOSUID: WOS:001289553400001
Contributors: Lask, Marie; Stawarczyk, Bogna; Reymus, Marcel; Meinen, John; Mayinger, Felicitas
Source: check_circle
Web of Science Researcher Profile Sync
grade
Preferred source (of 2)‎

Influence of different surface finishing procedures of strength-gradient multilayered zirconia crowns on two-body wear and fracture load: Lithium silicate or leucite glazing versus polishing?

Journal of the Mechanical Behavior of Biomedical Materials
2024 | Journal article
DOI: 10.1016/J.JMBBM.2023.106307
WOSUID: WOS:001133657500001
Contributors: Hoffmann, Moritz; Mayinger, Felicitas; Stawarczyk, Bogna
Source: check_circle
Web of Science Researcher Profile Sync
grade
Preferred source (of 2)‎

Influence of silver coated zeolite fillers on the chemical and mechanical properties of 3D-printed polyphenylene sulfone restorations

Journal of the Mechanical Behavior of Biomedical Materials
2024-12 | Journal article
DOI: 10.1016/j.jmbbm.2024.106756
Contributors: Felicitas Mayinger; Andrea Lösch; Elena Reznikova; Christian Wilhelm; Bogna Stawarczyk
Source: check_circle
Crossref

Digital versus conventional veneering of zirconia and cobalt chromium crowns: Fracture load before and after thermomechanical aging

The Journal of Prosthetic Dentistry
2023 | Journal article
DOI: 10.1016/J.PROSDENT.2023.04.023
WOSUID: WOS:001067860800001
Contributors: Mayinger, Felicitas; Meinen, John; Coldea, Andrea; Zimmermann, Marcus; Stawarczyk, Bogna
Source: check_circle
Web of Science Researcher Profile Sync
grade
Preferred source (of 2)‎

Three-Dimensional Printed Resin: Impact of Different Cleaning Protocols on Degree of Conversion and Tensile Bond Strength to a Composite Resin Using Various Adhesive Systems

Materials
2023 | Journal article
DOI: 10.3390/MA16093580
WOSUID: WOS:000987779000001
Contributors: Lankes, Valerie; Reymus, Marcel; Mayinger, Felicitas; Coldea, Andrea; Liebermann, Anja; Hoffmann, Moritz; Stawarczyk, Bogna
Source: check_circle
Web of Science Researcher Profile Sync

Water sorption, water solubility, degree of conversion, elastic indentation modulus, edge chipping resistance and flexural strength of 3D-printed denture base resins

Journal of the Mechanical Behavior of Biomedical Materials
2023 | Journal article
DOI: 10.1016/J.JMBBM.2022.105565
WOSUID: WOS:000900000600004
Contributors: Greil, Veronika; Mayinger, Felicitas; Reymus, Marcel; Stawarczyk, Bogna
Source: check_circle
Web of Science Researcher Profile Sync
grade
Preferred source (of 2)‎

Chemical and mechanical properties of dual-polymerizing core build-up materials

Clinical Oral Investigations
2022 | Journal article
DOI: 10.1007/S00784-022-04455-4
WOSUID: WOS:000773850900002
Contributors: Kelch, Matthias; Stawarczyk, Bogna; Mayinger, Felicitas
Source: check_circle
Web of Science Researcher Profile Sync

Impact of the material and sintering protocol, layer thickness, and thermomechanical aging on the two-body wear and fracture load of 4Y-TZP crowns

Clinical Oral Investigations
2022 | Journal article
DOI: 10.1007/S00784-022-04616-5
WOSUID: WOS:000825926100002
Contributors: Mayinger, Felicitas; Buser, Ramona; Laier, Maximilian; Schonhoff, Lisa Marie; Kelch, Matthias; Hampe, Rudiger; Stawarczyk, Bogna
Source: check_circle
Web of Science Researcher Profile Sync
grade
Preferred source (of 2)‎

Methodology investigation: Impact of crown geometry, crown, abutment and antagonist material and thermal loading on the two-body wear of dental materials

Dental Materials
2022 | Journal article
DOI: 10.1016/J.DENTAL.2021.12.009
WOSUID: WOS:000752948300004
Contributors: Schmeiser, Felix; Arbogast, Fee; Ruppel, Hendrik; Mayinger, Felicitas; Reymus, Marcel; Stawarczyk, Bogna
Source: check_circle
Web of Science Researcher Profile Sync

Three-dimensionally printed and milled polyphenylene sulfone materials in dentistry: Tensile bond strength to veneering composite resin and surface properties after different pretreatments

The Journal of Prosthetic Dentistry
2022-07 | Journal article
DOI: 10.1016/j.prosdent.2020.12.042
Contributors: Lisa Marie Schönhoff; Felicitas Mayinger; Marlis Eichberger; Andrea Lösch; Elena Reznikova; Bogna Stawarczyk
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Comparison of mechanical properties of different reinforced glass-ceramics

The Journal of Prosthetic Dentistry
2022-01 | Journal article
DOI: 10.1016/j.prosdent.2020.06.027
Contributors: Felicitas Mayinger; Nina Lümkemann; Martyna Musik; Marlis Eichberger; Bogna Stawarczyk
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Bonding Behavior Between Polyetheretherketone and Polymethylmethacrylate Acrylic Denture Polymer

The journal of adhesive dentistry
2021 | Journal article
DOI: 10.3290/j.jad.b1079579
EID:

2-s2.0-85104047155

Part of ISSN: 17579988
Contributors: Mayinger, F.; Fiebig, M.; Roos, M.; Eichberger, M.; Lümkemann, N.; Stawarczyk, B.
Source: Self-asserted source
Felicitas Mayinger via Scopus - Elsevier

Fracture load of veneered and monolithic single-unit fixed dental prostheses made from the high-performance thermoplastic polyphenylene sulfone

The International Journal of Prosthodontics
2021 | Journal article
DOI: 10.11607/ijp.7675
Part of ISSN: 0893-2174
Source: Self-asserted source
Felicitas Mayinger

Temporary 3D printed fixed dental prosthesis materials: Impact of post printing cleaning methods on degree of conversion as well as surface and mechanical properties

The International Journal of Prosthodontics
2021 | Journal article
DOI: 10.11607/ijp.7048
Part of ISSN: 0893-2174
Source: Self-asserted source
Felicitas Mayinger

Time-dependent degree of conversion, Martens parameters, and flexural strength of different dual-polymerizing resin composite luting materials

Clinical Oral Investigations
2021 | Journal article
DOI: 10.1007/s00784-021-04091-4
EID:

2-s2.0-85111883730

Part of ISSN: 14363771 14326981
Contributors: Kelch, M.; Stawarczyk, B.; Mayinger, F.
Source: Self-asserted source
Felicitas Mayinger via Scopus - Elsevier

3D printing of dental restorations: Mechanical properties of thermoplastic polymer materials

Journal of the Mechanical Behavior of Biomedical Materials
2021-07 | Journal article
DOI: 10.1016/j.jmbbm.2021.104544
Contributors: Lisa Marie Schönhoff; Felicitas Mayinger; Marlis Eichberger; Elena Reznikova; Bogna Stawarczyk
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Retention force of polyetheretherketone and cobalt-chrome-molybdenum removable dental prosthesis clasps after artificial aging

Clinical Oral Investigations
2021-05-16 | Journal article
DOI: 10.1007/s00784-020-03642-5
Contributors: Felicitas Mayinger; Danka Micovic; Andreas Schleich; Malgorzata Roos; Marlis Eichberger; Bogna Stawarczyk
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Is the high-performance thermoplastic polyetheretherketone indicated as a clasp material for removable dental prostheses?

Clinical Oral Investigations
2021-05-07 | Journal article
DOI: 10.1007/s00784-020-03603-y
Contributors: Danka Micovic; Felicitas Mayinger; Sebastian Bauer; Malgorzata Roos; Marlis Eichberger; Bogna Stawarczyk
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Bond strength of CAD-CAM and conventional veneering materials to different frameworks

The Journal of Prosthetic Dentistry
2021-04 | Journal article
DOI: 10.1016/j.prosdent.2020.01.048
Contributors: Felicitas Wiedenmann; Markus Klören; Daniel Edelhoff; Bogna Stawarczyk
Source: check_circle
Crossref

Edge chipping resistance of veneering composite resins

Journal of the Mechanical Behavior of Biomedical Materials
2021-04 | Journal article
DOI: 10.1016/j.jmbbm.2021.104349
Contributors: Parissa Nassary Zadeh; Bogna Stawarczyk; Rüdiger Hampe; Anja Liebermann; Felicitas Mayinger
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Impact of polymerization and storage on the degree of conversion and mechanical properties of veneering resin composites

Dental Materials Journal
2021-03-25 | Journal article
DOI: 10.4012/dmj.2019-394
Part of ISSN: 0287-4547
Part of ISSN: 1881-1361
Source: Self-asserted source
Felicitas Mayinger

Measuring the polymerization stress of self-adhesive resin composite cements by crack propagation

Clinical Oral Investigations
2021-03-15 | Journal article
DOI: 10.1007/s00784-020-03391-5
Contributors: Felicitas Wiedenmann; Fabian Becker; Marlis Eichberger; Bogna Stawarczyk
Source: check_circle
Crossref

Impact of High-Speed Sintering of Three-Unit 3Y-TZP and 4Y-TZP Fixed Dental Prostheses on Fracture Load With and Without Artificial Aging

The International Journal of Prosthodontics
2021-01 | Journal article
DOI: 10.11607/ijp.6775
Part of ISSN: 0893-2174
Source: Self-asserted source
Felicitas Mayinger
grade
Preferred source (of 2)‎

Effect of high-speed sintering on the flexural strength of hydrothermal and thermo-mechanically aged zirconia materials

Dental Materials
2020-09 | Journal article
DOI: 10.1016/j.dental.2020.05.013
Contributors: Eva Jerman; Felicitas Wiedenmann; Marlis Eichberger; Axel Reichert; Bogna Stawarczyk
Source: check_circle
Crossref

Influence of different surface treatments on two-body wear and fracture load of monolithic CAD/CAM ceramics

Clinical Oral Investigations
2020-09-13 | Journal article
DOI: 10.1007/s00784-019-03173-8
Contributors: Felicitas Wiedenmann; Denise Böhm; Marlis Eichberger; Daniel Edelhoff; Bogna Stawarczyk
Source: check_circle
Crossref

Impact of high-speed sintering, layer thickness and artificial aging on the fracture load and two-body wear of zirconia crowns

Dental Materials
2020-07 | Journal article
DOI: 10.1016/j.dental.2020.04.004
Part of ISSN: 0109-5641
Source: Self-asserted source
Felicitas Mayinger

A pattern of care analysis: Prosthetic rehabilitation of head and neck cancer patients after radiotherapy

Clinical Implant Dentistry and Related Research
2020-06 | Journal article
DOI: 10.1111/cid.12912
Contributors: Felicitas Wiedenmann; Anja Liebermann; Florian Probst; Matthias Troeltzsch; Panagiotis Balermpas; Matthias Guckenberger; Daniel Edelhoff; Michael Mayinger
Source: check_circle
Crossref

Different polishing methods for zirconia: impact on surface, optical, and mechanical properties

Clinical Oral Investigations
2020-01-18 | Journal article
DOI: 10.1007/s00784-019-02953-6
Contributors: Regina Pfefferle; Nina Lümkemann; Felicitas Wiedenmann; Bogna Stawarczyk
Source: check_circle
Crossref

Influence of Different Cleaning Procedures on Tensile Bond Strength Between Zirconia Abutment and Titanium Base

The International Journal of Oral & Maxillofacial Implants
2019-11 | Journal article
DOI: 10.11607/jomi.7638
Part of ISSN: 0882-2786
Source: Self-asserted source
Felicitas Mayinger

Safe Brain Tumor Resection Does not Depend on Surgery Alone - Role of Hemodynamics

Scientific Reports
2017-12 | Journal article
DOI: 10.1038/s41598-017-05767-2
Part of ISSN: 2045-2322
Source: Self-asserted source
Felicitas Mayinger
How many people are using ORCID?