Personal information

Other IDs

ResearcherID: I-3700-2016
Scopus Author ID: 14326448700

Activities

Collapse all

Works (46)

Polymer-based pin-fin microchannel heat exchangers: A comparative study of material and structural effects on performance

International Journal of Thermal Sciences
2025-03 | Journal article
DOI: 10.1016/j.ijthermalsci.2024.109546
Contributors: Longjie Li; Qianfan Tang; Xuejin Chen; Can Weng
Source: check_circle
Crossref

Tuning Electro-Optical Characteristics through Polymerization Monomer Content in PSVA Liquid Crystal Displays: Simulation and Experimentation

Polymers
2024-06-06 | Journal article
DOI: 10.3390/polym16111606
Contributors: Xiaoyu Zhang; Wei Lin; Jiezhen Liu; Jiangwen Liu; Can Weng
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Enhancing structural replication of microfluidic chips: Parameter optimization and mold insert modification

Polymer Engineering & Science
2024-05 | Journal article
DOI: 10.1002/pen.26675
Contributors: Yilei Wang; Can Weng; Zihao Fei; Huijie Sun; Bingyan Jiang
Source: check_circle
Crossref

Tribological properties and corrosion resistance of nickel-based composite mold inserts containing lubricant nanoparticles for micro-injection molding

Journal of Materials Research and Technology
2023-09 | Journal article
DOI: 10.1016/j.jmrt.2023.08.241
Contributors: Yilei Wang; Can Weng; Huijie Sun; Bingyan Jiang
Source: check_circle
Crossref

Effect of Interfacial Interaction on the Demolding Deformation of Injection Molded Microfluidic Chips

Nanomaterials
2022-09-29 | Journal article
DOI: 10.3390/nano12193416
Contributors: Yilei Wang; Can Weng; Huijie Sun; Zijian Deng; Bingyan Jiang
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Study on the Effect of Processing Parameters on Residual Stresses of Injection Molded Micro-Pillar Array

Polymers
2022-08-17 | Journal article
DOI: 10.3390/polym14163358
Contributors: Xiaoyu Zhang; Tao Ding; Wanlin Wang; Jiezhen Liu; Can Weng
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Application and Optimization of the Thin Electric Heater in Micro-Injection Mold for Micropillars

Nanomaterials
2022-05-20 | Journal article
DOI: 10.3390/nano12101751
Contributors: Can Weng; Qianfan Tang; Jiangwei Li; Lintao Nie; Zhanyu Zhai
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Experimental Investigation and Molecular Dynamics Simulation on the Anti-Adhesion Behavior of Alkanethiols on Nickel Insert in Micro Injection Molding

Nanomaterials
2021-07-14 | Journal article
DOI: 10.3390/nano11071834
Contributors: Can Weng; Jiachen Chen; Jin Yang; Mingyong Zhou; Bingyan Jiang
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

One-Step Preparation of Robust Superhydrophobic Foam for Oil/Water Separation by Pulse Electrodeposition

Langmuir
2021-06-15 | Journal article
DOI: 10.1021/acs.langmuir.1c00640
Contributors: Yonghui Zhang; Jiangwen Liu; Ligeng Ouyang; Jiaming Li; Guie Xie; Yinyin Yan; Can Weng
Source: check_circle
Crossref

Self-Assembled Monolayers of Alkanethiols on Nickel Insert: Characterization of Friction and Analysis on Demolding Quality in Microinjection Molding

Micromachines
2021-05-29 | Journal article
DOI: 10.3390/mi12060636
Contributors: Jiachen Chen; Jin Yang; Mingyong Zhou; Can Weng
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Molecular dynamics simulation on the adhesion mechanism at polymer‐mold interface of microinjection molding

Journal of Applied Polymer Science
2021-04-05 | Journal article
DOI: 10.1002/app.50105
Contributors: Jin Yang; Zhanyu Zhai; Jiezhen Liu; Can Weng
Source: check_circle
Crossref

Influence of Diamond-Like Carbon Coating on the Channel Deformation of Injection-Molded Microfluidic Chips during the Demolding Process

Polymers
2020-12-04 | Journal article
DOI: 10.3390/polym12122914
Contributors: Yilei Wang; Bingyan Jiang; Mingyong Zhou; Jiachen Chen; Can Weng
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Investigation of Interface Thermal Resistance between Polymer and Mold Insert in Micro-Injection Molding by Non-Equilibrium Molecular Dynamics

Polymers
2020-10-19 | Journal article
DOI: 10.3390/polym12102409
Contributors: Can Weng; Jiangwei Li; Jun Lai; Jiangwen Liu; Hao Wang
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Dry mechanical-electrochemical polishing of selective laser melted 316L stainless steel

Materials & Design
2020-08 | Journal article
DOI: 10.1016/j.matdes.2020.108840
Contributors: Yuchao Bai; Cuiling Zhao; Jin Yang; Jerry Ying Hsi Fuh; Wen Feng Lu; Can Weng; Hao Wang
Source: check_circle
Crossref

Formation Mechanism of Residual Stresses in Micro-Injection Molding of PMMA: A Molecular Dynamics Simulation

Polymers
2020-06-17 | Journal article
DOI: 10.3390/polym12061368
Contributors: Can Weng; Tao Ding; Mingyong Zhou; Jiezhen Liu; Hao Wang
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Molecular dynamics simulations on the demolding process for nanostructures with different aspect ratios in injection molding

Micromachines
2019 | Journal article
DOI: 10.3390/mi10100636
EID:

2-s2.0-85073193533

Part of ISBN:

2072666X
Contributors: Weng, C.; Yang, D.; Zhou, M.
Source: Self-asserted source
Can Weng via Scopus - Elsevier

Molecular dynamics study on the deformation behaviors of nanostructures in the demolding process of micro-injection molding

Polymers
2019 | Journal article
DOI: 10.3390/polym11030470
EID:

2-s2.0-85063368463

Part of ISBN:

20734360
Contributors: Weng, C.; Yang, J.; Yang, D.; Jiang, B.
Source: Self-asserted source
Can Weng via Scopus - Elsevier

Thermodynamic analysis and injection molding of hierarchical superhydrophobic polypropylene surfaces

Journal of Polymer Engineering
2019 | Journal article
DOI: 10.1515/polyeng-2019-0109
EID:

2-s2.0-85076278662

Part of ISBN:

03346447
Contributors: Weng, C.; Yang, J.; Wang, F.; Ding, T.; Zhai, Z.
Source: Self-asserted source
Can Weng via Scopus - Elsevier

Molecular Dynamics Simulation on the Influences of Nanostructure Shape, Interfacial Adhesion Energy, and Mold Insert Material on the Demolding Process of Micro-Injection Molding

Polymers
2019-09 | Journal article | Author
DOI: 10.3390/polym11101573
Contributors: Jin Yang; Can Weng; Jun Lai; Tao Ding; Hao Wang
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 3)‎

Fabrication of Electroformed Mold Inserts with Micro-nano Structures from Hydrophobic Plant Surfaces

Cailiao Gongcheng/Journal of Materials Engineering
2018 | Journal article
DOI: 10.11868/j.issn.1001-4381.2015.001513
EID:

2-s2.0-85048210576

Part of ISBN:

10014381
Contributors: Li, X.; Jiang, B.-Y.; Lyu, H.; Zhou, M.-Y.; Weng, C.
Source: Self-asserted source
Can Weng via Scopus - Elsevier

Fabrication of hierarchical polymer surfaces with superhydrophobicity by injection molding from nature and function-oriented design

Applied Surface Science
2018 | Journal article
DOI: 10.1016/j.apsusc.2017.11.268
EID:

2-s2.0-85037530610

Part of ISBN:

01694332
Contributors: Weng, C.; Wang, F.; Zhou, M.; Yang, D.; Jiang, B.
Source: Self-asserted source
Can Weng via Scopus - Elsevier

Fabrication of high aspect ratio nanopillars and micro/nano combined structures with hydrophobic surface characteristics by injection molding

Applied Surface Science
2018 | Journal article
DOI: 10.1016/j.apsusc.2017.08.003
EID:

2-s2.0-85028348513

Part of ISBN:

01694332
Contributors: Zhou, M.; Xiong, X.; Jiang, B.; Weng, C.
Source: Self-asserted source
Can Weng via Scopus - Elsevier

Effect of Current Density on Quality of Electroformed Mold Inserts with Micro/Nano-cavities

Cailiao Gongcheng/Journal of Materials Engineering
2017 | Journal article
DOI: 10.11868/j.issn.1001-4381.2016.000104
EID:

2-s2.0-85036454960

Part of ISBN:

10014381
Contributors: Weng, C.; Wang, F.; Yang, D.-J.; Lyu, H.; Jiang, B.-Y.
Source: Self-asserted source
Can Weng via Scopus - Elsevier

Effect of fluid filed distribution on quality of electrodeposited stamp with nanostructures

Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology)
2017 | Journal article
DOI: 10.11817/j.issn.1672-7207.2017.05.013
EID:

2-s2.0-85026769386

Part of ISBN:

16727207
Contributors: Lü, H.; Jiang, B.; Weng, C.; Zhou, M.; Li, X.
Source: Self-asserted source
Can Weng via Scopus - Elsevier

Experimental study on the replication quality of micro–nano cross-shaped structure arrays in injection molding

Microsystem Technologies
2017 | Journal article
DOI: 10.1007/s00542-016-2819-1
EID:

2-s2.0-84954465838

Part of ISBN:

09467076
Contributors: Zhou, M.; Jiang, B.; Weng, C.; Zhang, L.
Source: Self-asserted source
Can Weng via Scopus - Elsevier

Impact of mold cavity surface temperature on replication quality of polymer nanostructures

Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology)
2017 | Journal article
DOI: 10.11817/j.issn.1672-7207.2017.04.014
EID:

2-s2.0-85026748424

Part of ISBN:

16727207
Contributors: Zhang, L.; Jiang, B.; Weng, C.; Zhou, M.; Lu, L.
Source: Self-asserted source
Can Weng via Scopus - Elsevier

Replication by Template Methods and Wetting Properties of Indocalamus-leaf-like Polymer Surfaces

Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
2017 | Journal article
DOI: 10.6041/j.issn.1000-1298.2017.10.054
EID:

2-s2.0-85040721709

Part of ISBN:

10001298
Contributors: Weng, C.; Yang, D.; Wang, F.; Zhou, H.
Source: Self-asserted source
Can Weng via Scopus - Elsevier

Study on permeability of porous ultra-high molecular weight polyethylene (UHMWPE)

International Polymer Processing
2017 | Journal article
DOI: 10.3139/217.3189
EID:

2-s2.0-85018763163

Part of ISBN:

0930777X
Contributors: Jiang, B.-Y.; Zhou, M.-Y.; Weng, C.; Li, C.-F.
Source: Self-asserted source
Can Weng via Scopus - Elsevier

Fabrication of nanopillar arrays by combining electroforming and injection molding

International Journal of Advanced Manufacturing Technology
2016 | Journal article
DOI: 10.1007/s00170-015-8260-2
EID:

2-s2.0-84953381342

Part of ISBN:

14333015 02683768
Contributors: Jiang, B.-Y.; Zhou, M.-Y.; Weng, C.; Zhang, L.; Lv, H.
Source: Self-asserted source
Can Weng via Scopus - Elsevier

Improvement of thickness deposition uniformity in nickel electroforming for micro mold inserts

Journal of Central South University
2016 | Journal article
DOI: 10.1007/s11771-016-3314-7
EID:

2-s2.0-85006699723

Part of ISBN:

22275223 20952899
Contributors: Jiang, B.-Y.; Weng, C.; Zhou, M.-Y.; Lv, H.; Drummer, D.
Source: Self-asserted source
Can Weng via Scopus - Elsevier

Improvement on replication quality of electroformed nickel mold inserts with micro/nano-structures

International Communications in Heat and Mass Transfer
2016 | Journal article
DOI: 10.1016/j.icheatmasstransfer.2016.03.025
EID:

2-s2.0-84963640822

Part of ISBN:

07351933
Contributors: Weng, C.; Zhou, M.; Jiang, B.; Lv, H.
Source: Self-asserted source
Can Weng via Scopus - Elsevier

Molecular dynamics study on polymer filling into nano-cavity by injection molding

Computational Materials Science
2016 | Journal article
DOI: 10.1016/j.commatsci.2016.04.004
EID:

2-s2.0-84964300678

Part of ISBN:

09270256
Contributors: Zhou, M.; Jiang, B.; Weng, C.
Source: Self-asserted source
Can Weng via Scopus - Elsevier

Injection molding nanostructures by template method and their hydrophobic properties

Guangxue Jingmi Gongcheng/Optics and Precision Engineering
2015 | Journal article
DOI: 10.3788/OPE.20152301.0165
EID:

2-s2.0-84923831277

Part of ISBN:

1004924X
Contributors: Zhou, M.-Y.; Jiang, B.-Y.; Zhang, L.; Lu, L.-J.; Weng, C.
Source: Self-asserted source
Can Weng via Scopus - Elsevier

Molecular dynamic simulation of injection molded nanostructures

Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering
2015 | Journal article
EID:

2-s2.0-84946141076

Part of ISBN:

10007555
Contributors: Jiang, B.; Zhou, M.; Lu, L.; Weng, C.
Source: Self-asserted source
Can Weng via Scopus - Elsevier

Microchannel Deformation of Polymer Chip in In-Mold Bonding

International Polymer Processing
2014 | Journal article
DOI: 10.3139/217.2845
WOSUID:

WOS:000341128100010
Contributors: Chu, C. -P.; Jiang, B. -Y.; Weng, C.; Jiang, F. -Z.
Source: Self-asserted source
Can Weng via ResearcherID
grade
Preferred source (of 2)‎

A weight analysis for the replication accuracy improvement of injection-molded microlens arrays

Optoelectronics and Advanced Materials-Rapid Communications
2013 | Journal article
WOSUID:

WOS:000319787800003
Contributors: Jiang, Bingyan; Shen, Longjiang; Weng, Can
Source: Self-asserted source
Can Weng via ResearcherID

A weight analysis for the replication accuracy improvement of injection-molded microlens arrays

Optoelectronics and Advanced Materials, Rapid Communications
2013 | Journal article
EID:

2-s2.0-84878759615

Part of ISBN:

18426573 20653824
Contributors: Jiang, B.; Shen, L.; Weng, C.
Source: Self-asserted source
Can Weng via Scopus - Elsevier

A study of the relevant effects on the maximum residual stress in the precision injection moulding of microlens arrays

Journal of Micromechanics and Microengineering
2010 | Journal article
DOI: 10.1088/0960-1317/20/3/035033
WOSUID:

WOS:000275331300033
Contributors: Weng, C.; Lee, W. B.; To, S.
Source: Self-asserted source
Can Weng via ResearcherID
grade
Preferred source (of 2)‎

Birefringence techniques for the characterization of residual stresses in injection-moulded micro-lens arrays

Polymer Testing
2009 | Journal article
DOI: 10.1016/j.polymertesting.2009.06.007
WOSUID:

WOS:000270121200007
Contributors: Weng, Can; Lee, W. B.; To, S.
Source: Self-asserted source
Can Weng via ResearcherID
grade
Preferred source (of 2)‎

Effects of aperture structure on residual stress of precision injection molded microlens arrays

Annual Technical Conference - ANTEC, Conference Proceedings
2009 | Conference paper
EID:

2-s2.0-70449945814
Contributors: Weng, C.; Lee, W.B.; To, S.
Source: Self-asserted source
Can Weng via Scopus - Elsevier

Numerical simulation of residual stress and birefringence in the precision injection molding of plastic microlens arrays

International Communications in Heat and Mass Transfer
2009 | Journal article
DOI: 10.1016/j.icheatmasstransfer.2008.11.002
WOSUID:

WOS:000264728200004
Contributors: Weng, Can; Lee, W. B.; To, S.; Jiang, Bing-yan
Source: Self-asserted source
Can Weng via ResearcherID
grade
Preferred source (of 2)‎

An investigation of form errors predicted model for injection moulded aspheric VCD lens

Key Engineering Materials
2008 | Book
EID:

2-s2.0-38849162794

Part of ISBN:

10139826
Contributors: To, S.; Jiang, B.Y.; Weng, C.; Lee, W.B.
Source: Self-asserted source
Can Weng via Scopus - Elsevier

The influences of process parameters on residual stress of injection moulded microlens array

Proceedings of the 10th Anniversary International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2008
2008 | Conference paper
EID:

2-s2.0-60449102812
Contributors: Weng, C.; Lee, W.B.; To, S.
Source: Self-asserted source
Can Weng via Scopus - Elsevier

Effects of different micro-feature structures on warpage and deformation of light guide plate

Guangxue Jingmi Gongcheng/Optics and Precision Engineering
2007 | Journal article
EID:

2-s2.0-34147215988

Part of ISBN:

1004924X
Contributors: Jiang, B.-Y.; Shen, L.-J.; Luo, J.-H.; Weng, C.
Source: Self-asserted source
Can Weng via Scopus - Elsevier

HDPE static non-isothermal crystallization in micro-injection molding process

Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology)
2007 | Journal article
EID:

2-s2.0-36549064289

Part of ISBN:

16727207
Contributors: Jiang, B.-Y.; Yin, X.-L.; Weng, C.; Wang, J.
Source: Self-asserted source
Can Weng via Scopus - Elsevier

Cavity temperature of LDPE injection molded parts with microstructure region considering latent heat

Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology)
2006 | Journal article
EID:

2-s2.0-33748196533

Part of ISBN:

16727207
Contributors: Jiang, B.-Y.; Weng, C.; Luo, J.-H.; Du, X.
Source: Self-asserted source
Can Weng via Scopus - Elsevier
How many people are using ORCID?