Personal information

Activities

Employment (1)

Embry-Riddle Aeronautical University: Daytona Beach, Florida, US

Professor
Employment
Source: Self-asserted source
Sandra K. S. Boetcher

Education and qualifications (1)

University of Minnesota: Minneapolis, Minnesota, US

2006 | Doctor of Philosophy (Mechanical Engineering)
Education
Source: Self-asserted source
Sandra K. S. Boetcher

Professional activities (1)

American Society of Mechanical Engineers: New York, New York, US

2019 | Fellow
Distinction
Source: Self-asserted source
Sandra K. S. Boetcher

Works (50 of 85)

Items per page:
Page 1 of 2

Comparison of predictive tools for supercritical CO2 horizontal cooling and the impact of artificial neural network input–output parameter selection

Applied Thermal Engineering
2025-03 | Journal article
Contributors: Nicholas C. Lopes; Vinusha Dasarla; Yang Chao; Prashant Shekhar; Sandra K.S. Boetcher; Mark A. Ricklick
Source: check_circle
Crossref

Vat photopolymerization for thermal energy storage applications using encapsulated phase change material suspended in photocurable resin

Thermal Science and Engineering Progress
2024-12 | Journal article
Contributors: Isabel Melendez; Karl B. Morgan; Casey J. Troxler; Rafael M. Rodriguez; Sandra K.S. Boetcher
Source: check_circle
Crossref

Influence of thermal boundary conditions on local supercritical CO2 cooling heat transfer: A case study

International Journal of Heat and Fluid Flow
2024-04 | Journal article
Contributors: Nicholas C. Lopes; Yang Chao; Mark A. Ricklick; Sandra K.S. Boetcher
Source: check_circle
Crossref

Polymer Nanocomposite Sensors with Improved Piezoelectric Properties through Additive Manufacturing

Sensors
2024-04-24 | Journal article
Contributors: Rishikesh Srinivasaraghavan Govindarajan; Zefu Ren; Isabel Melendez; Sandra K. S. Boetcher; Foram Madiyar; Daewon Kim
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Impact of adiabatic entrance length on numerical simulations of supercritical CO 2 heat transfer in horizontal circular tubes

Numerical Heat Transfer, Part A: Applications
2023-12-25 | Journal article
Contributors: Yang Chao; Nicholas C. Lopes; Mark A. Ricklick; Sandra K. S. Boetcher
Source: check_circle
Crossref

Mechanical and Thermal Characterization of Phase-Change Material and High-Density Polyethylene Functional Composites for Thermal Energy Storage

Journal of Solar Energy Engineering
2023-12-01 | Journal article
Part of ISSN: 0199-6231
Part of ISSN: 1528-8986
Contributors: Melissa A. Messenger; Casey J. Troxler; Isabel Melendez; Thomas B. Freeman; Nicholas Reed; Rafael M. Rodriguez; Sandra K. S. Boetcher
Source: Self-asserted source
Sandra K. S. Boetcher

Direct atmospheric cryogenic carbon capture in cold climates

Carbon Capture Science & Technology
2023-09 | Journal article
Contributors: Sandra K.S. Boetcher; Jennifer B. Perskin; Yanir Maidenberg; Matthew J. Traum; Ted von Hippel
Source: check_circle
Crossref

Advanced Materials and Additive Manufacturing for Phase Change Thermal Energy Storage and Management: A Review

Advanced Energy Materials
2023-05-05 | Journal article
Part of ISSN: 1614-6832
Part of ISSN: 1614-6840
Contributors: Thomas B. Freeman; Kyle E.O. Foster; Casey J. Troxler; Cameron W. Irvin; Anastasia Aday; Sandra K. S. Boetcher; Allison Mahvi; Matthew K. Smith; Adewale Odukomaiya
Source: Self-asserted source
Sandra K. S. Boetcher

Impact of Data Representation on Artificial Neural Network Performance in sCO<sub>2</sub> Cooling Applications

AIAA SCITECH 2023 Forum
2023-01-23 | Conference paper
Contributors: Vinusha Dasarla Giri Babu; Yang Chao; Nicholas C. Lopes; Mark Ricklick; Prashant Shekhar; Sandra Boetcher
Source: Self-asserted source
Sandra K. S. Boetcher

Numerical investigation of flow development and thermal boundary condition effects on local sCO2 heat transfer trends in circular tubes

AIAA SCITECH 2023 Forum
2023-01-23 | Conference paper
Contributors: Yang Chao; Nicholas C. Lopes; Sandra Boetcher; Mark A. Ricklick
Source: Self-asserted source
Sandra K. S. Boetcher

Experimental and Numerical Investigation of Lauric Acid Melting at Suboptimal Inclines

ASME Open Journal of Engineering
2023-01-01 | Journal article
Part of ISSN: 2770-3495
Contributors: Casey J. Troxler; Thomas B. Freeman; Rafael M. Rodriguez; Sandra K. S. Boetcher
Source: Self-asserted source
Sandra K. S. Boetcher

Application of carbon nanotube prepared from waste plastic to phase change materials: The potential for battery thermal management

Waste Management
2022-12 | Journal article
Part of ISSN: 0956-053X
Contributors: Sandra K. S. Boetcher; Yuanyuan Wang; Josh Bailey; Yuan Zhu; Yingrui Zhang; Sandra K.S. Boetcher; Yongliang Li; Chunfei Wu
Source: Self-asserted source
Sandra K. S. Boetcher

Comprehensive Review of Heat Transfer Correlations of Supercritical CO2 in Straight Tubes Near the Critical Point: A Historical Perspective

Journal of Heat Transfer
2022-12-01 | Journal article
Part of ISSN: 0022-1481
Part of ISSN: 1528-8943
Contributors: Sandra K. S. Boetcher; Nicholas C. Lopes; Yang Chao; Vinusha Dasarla; Neil P. Sullivan; Mark A. Ricklick; Sandra K. S. Boetcher
Source: Self-asserted source
Sandra K. S. Boetcher

On the feasibility of precompression for direct atmospheric cryogenic carbon capture

Carbon Capture Science & Technology
2022-09 | Journal article
Contributors: Jennifer B. Perskin; Matthew J. Traum; Ted von Hippel; Sandra K.S. Boetcher
Source: check_circle
Crossref

Turbulent convective heat transfer behavior of supercritical water flowing upward in 2 × 2 rod bundle channels with various spacers

Numerical Heat Transfer, Part A: Applications
2022-09-17 | Journal article
Contributors: Xin Li; Gongnan Xie; Hangfei Duan; Sandra K. S. Boetcher
Source: check_circle
Crossref

Cool Thermal Energy Storage

Solid–Liquid Thermal Energy Storage
2022-04-13 | Book chapter
Part of ISBN: 9781003213260
Contributors: Sandra K. S. Boetcher; Sandra K. S. Boetcher
Source: Self-asserted source
Sandra K. S. Boetcher

Fused filament fabrication of novel phase-change material functional composites

Additive Manufacturing
2021 | Journal article
EID:

2-s2.0-85099497603

Part of ISSN: 22148604
Contributors: Freeman, T.B.; Messenger, M.A.; Troxler, C.J.; Nawaz, K.; Rodriguez, R.M.; Boetcher, S.K.S.
Source: Self-asserted source
Sandra K. S. Boetcher via Scopus - Elsevier

Moisture affinity of HDPE/phase-change material composites for thermal energy storage applications

RSC Advances
2021 | Journal article
Contributors: Kashif Nawaz; Thomas B. Freeman; Rafael M. Rodriguez; Sandra K. S. Boetcher
Source: check_circle
Crossref

Assessment of conventional and air-jet wheel deflectors for drag reduction of the DrivAer model

Advances in Aerodynamics
2021-12 | Journal article
Contributors: Kaloki L. Nabutola; Sandra K. S. Boetcher
Source: check_circle
Crossref

Effect of the Heat Transfer Coefficient Reference Temperatures on Validating Numerical Models of Supercritical CO2

Journal of Verification, Validation and Uncertainty Quantification
2021-12-01 | Journal article
Part of ISSN: 2377-2158
Part of ISSN: 2377-2166
Source: Self-asserted source
Sandra K. S. Boetcher

Experimental and Numerical Investigation of Phase Change Material Melting at Suboptimal Inclines

Volume 11: Heat Transfer and Thermal Engineering
2021-11-01 | Conference paper
Contributors: Casey J. Troxler; Thomas B. Freeman; Rafael M. Rodriguez; Sandra K. S. Boetcher
Source: Self-asserted source
Sandra K. S. Boetcher

Inhomogeneous behavior of supercritical hydrocarbon fuel flow in a regenerative cooling channel for a scramjet engine

Aerospace Science and Technology
2021-10 | Journal article
Contributors: Feng Sun; Xin Li; Sandra K.S. Boetcher; Gongnan Xie
Source: check_circle
Crossref

Impact of Uncertainty on Prediction of Supercritical CO2 Properties and Nusselt Numbers

Journal of Heat Transfer
2021-10-01 | Journal article
Part of ISSN: 0022-1481
Part of ISSN: 1528-8943
Source: Self-asserted source
Sandra K. S. Boetcher

Special Issue: Innovations and Advancements in Heat & Mass Transfer: Celebrating the Legacy of Professor Ephraim M. Sparrow

Journal of Heat Transfer
2021-10-01 | Journal article
Part of ISSN: 0022-1481
Part of ISSN: 1528-8943
Source: Self-asserted source
Sandra K. S. Boetcher

On the Validation of Turbulence Models for Wheel and Wheelhouse Aerodynamics

Journal of Verification, Validation and Uncertainty Quantification
2021-06-01 | Journal article
Part of ISSN: 2377-2158
Part of ISSN: 2377-2166
Source: Self-asserted source
Sandra K. S. Boetcher

Special Section on Flow Physics of Supercritical Fluids in Engineering

Journal of Fluids Engineering
2021-04-01 | Journal article
Part of ISSN: 0098-2202
Part of ISSN: 1528-901X
Source: Self-asserted source
Sandra K. S. Boetcher

A review of heat transfer deterioration of supercritical carbon dioxide flowing in vertical tubes: Heat transfer behaviors, identification methods, critical heat fluxes, and heat transfer correlations

International Journal of Heat and Mass Transfer
2020 | Journal article
EID:

2-s2.0-85076671182

Contributors: Xie, J.; Liu, D.; Yan, H.; Xie, G.; Boetcher, S.K.S.
Source: Self-asserted source
Sandra K. S. Boetcher via Scopus - Elsevier

Supercritical co2 heat transfer in a staggered pin-fin channel

AIAA Propulsion and Energy 2020 Forum
2020 | Conference paper
EID:

2-s2.0-85091314039

Contributors: Sullivan, N.; Ricklick, M.; Boetcher, S.
Source: Self-asserted source
Sandra K. S. Boetcher via Scopus - Elsevier

Supercritical CO2 flowing upward in a vertical tube subject to axially nonuniform heating

Numerical Heat Transfer, Part A: Applications
2020-12-16 | Journal article
Contributors: Xin Li; Feng Sun; Gongnan Xie; Sandra K. S. Boetcher
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Heat transfer enhancement of rotating wedge-shaped channels with pin fins and Kagome lattices

Numerical Heat Transfer, Part A: Applications
2020-06-17 | Journal article
Contributors: Yang Li; Beibei Shen; Hongbin Yan; Sandra K. S. Boetcher; Gongnan Xie
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

In-situ Measurement of Resin Shrinkage with Respect to Degree of Cure

AIAA Scitech 2020 Forum
2020-01-06 | Conference paper
Source: Self-asserted source
Sandra K. S. Boetcher
grade
Preferred source (of 3)‎

Assessment of eddy-viscosity turbulence models on flow in a wheelhouse

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2019 | Conference paper
EID:

2-s2.0-85078807613

Contributors: Nabutola, K.L.; Boetcher, S.K.S.
Source: Self-asserted source
Sandra K. S. Boetcher via Scopus - Elsevier

Drag reduction of ground vehicles using air-injected wheel deflectors

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2019 | Conference paper
EID:

2-s2.0-85078769566

Contributors: Nabutola, K.L.; Boetcher, S.K.S.
Source: Self-asserted source
Sandra K. S. Boetcher via Scopus - Elsevier

Phase-Change Materials/HDPE Composite Filament: A First Step Toward Use with 3D Printing for Thermal Management Applications

Journal of Thermal Science and Engineering Applications
2019 | Journal article
EID:

2-s2.0-85063617933

Contributors: Freeman, T.B.; Spitzer, D.; Currier, P.N.; Rollin, V.; Boetcher, S.K.S.
Source: Self-asserted source
Sandra K. S. Boetcher via Scopus - Elsevier

Thermodynamic Model of CO2 Deposition in Cold Climates

Climatic Change
2019-12-06 | Journal article
Part of ISSN: 0165-0009
Part of ISSN: 1573-1480
Source: Self-asserted source
Sandra K. S. Boetcher
grade
Preferred source (of 3)‎

Heat transfer enhancement of wedge-shaped channels by replacing pin fins with Kagome lattice structures

International Journal of Heat and Mass Transfer
2019-10 | Journal article
Part of ISSN: 0017-9310
Source: Self-asserted source
Sandra K. S. Boetcher
grade
Preferred source (of 2)‎

Heat transfer enhancement of X-lattice-cored sandwich panels by introducing pin fins, dimples or protrusions

International Journal of Heat and Mass Transfer
2019-10 | Journal article
Part of ISSN: 0017-9310
Source: Self-asserted source
Sandra K. S. Boetcher
grade
Preferred source (of 2)‎

3D-printed PCM/HDPE composites for battery thermal management

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2018 | Conference paper
EID:

2-s2.0-85064044594

Contributors: Freeman, T.B.; Nabutola, K.; Spitzer, D.; Currier, P.N.; Boetcher, S.K.S.
Source: Self-asserted source
Sandra K. S. Boetcher via Scopus - Elsevier

Utilizing phase-change material to thermally regulate and capture heat from buidling-integrated photovoltaic panels

Proceeding of Second Thermal and Fluids Engineering Conference
2017 | Conference paper
Source: Self-asserted source
Sandra K. S. Boetcher

Effect on thermal regulation of interface between photovoltaic panel and phase change material

Proceedings of The First Pacific Rim Thermal Engineering Conference
2016 | Conference paper
Source: Self-asserted source
Sandra K. S. Boetcher

Numerical investigation of phase-change materials to thermally regulate photovoltaic panels

Proceedings of the First Pacific Rim Thermal Engineering Conference
2016 | Conference paper
Source: Self-asserted source
Sandra K. S. Boetcher

Inverse vof meshless method for efficient nondestructive thermographic evaluation

Computational Thermal Sciences
2015 | Journal article
EID:

2-s2.0-84938522018

Contributors: Divo, E.; Saad, H.; Boetcher, S.; Brown, J.; Kassab, A.
Source: Self-asserted source
Sandra K. S. Boetcher via Scopus - Elsevier

Optimizing jets for active control of wake refinement for ground vehicles

Journal of Fluids Engineering, Transactions of the ASME
2015 | Journal article
EID:

2-s2.0-84939839645

Contributors: Barsotti, D.L.; Divo, E.A.; Boetcher, S.K.S.
Source: Self-asserted source
Sandra K. S. Boetcher via Scopus - Elsevier

Phase-change material to thermally regulate photovoltaic panels to improve solar to electric efficiency

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2015 | Conference paper
EID:

2-s2.0-84974686160

Contributors: Rosenthal, A.H.; Gonçalves, B.P.; Beckwith, J.A.; Gulati, R.; Compere, M.D.; Boetcher, S.K.S.
Source: Self-asserted source
Sandra K. S. Boetcher via Scopus - Elsevier

A robust and efficient thermographic NDE tool based on an inverse VOF Meshless method

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
2014 | Conference paper
EID:

2-s2.0-84926442868

Contributors: Saad, H.; Divo, E.; Boetcher, S.; Brown, J.; Kassab, A.
Source: Self-asserted source
Sandra K. S. Boetcher via Scopus - Elsevier

Introduction

SpringerBriefs in Applied Sciences and Technology
2014 | Book
EID:

2-s2.0-85028823112

Contributors: Boetcher, S.K.S.
Source: Self-asserted source
Sandra K. S. Boetcher via Scopus - Elsevier

Investigation of shroud geometry to passively improve heat transfer in a solar thermal storage tank

Journal of Solar Energy Engineering, Transactions of the ASME
2014 | Journal article
EID:

2-s2.0-84889642632

Contributors: Zemler, M.K.; Boetcher, S.K.S.
Source: Self-asserted source
Sandra K. S. Boetcher via Scopus - Elsevier

Natural convection from circular cylinders

SpringerBriefs in Applied Sciences and Technology
2014 | Book
EID:

2-s2.0-85028851722

Contributors: Boetcher, S.K.S.
Source: Self-asserted source
Sandra K. S. Boetcher via Scopus - Elsevier

Natural convection heat transfer from horizontal cylinders

SpringerBriefs in Applied Sciences and Technology
2014 | Book
EID:

2-s2.0-85016741632

Contributors: Boetcher, S.K.S.
Source: Self-asserted source
Sandra K. S. Boetcher via Scopus - Elsevier

Natural convection heat transfer from inclined cylinders

SpringerBriefs in Applied Sciences and Technology
2014 | Book
EID:

2-s2.0-85028818278

Contributors: Boetcher, S.K.S.
Source: Self-asserted source
Sandra K. S. Boetcher via Scopus - Elsevier
Items per page:
Page 1 of 2

Peer review (41 reviews for 11 publications/grants)

Review activity for Advances in aerodynamics. (1)
Review activity for Applied thermal engineering. (5)
Review activity for Carbon capture science & technology. (1)
Review activity for Industrial & engineering chemistry research. (1)
Review activity for International communications in heat and mass transfer. (4)
Review activity for International Journal of Heat and Mass Transfer. (8)
Review activity for Journal of energy storage. (4)
Review activity for Journal of thermal analysis and calorimetry. (4)
Review activity for Langmuir : (1)
Review activity for Progress in additive manufacturing. (3)
Review activity for The international journal of heat and fluid flow. (9)