Personal information

Other IDs

Scopus Author ID: 55786585500

Activities

Collapse all

Employment (2)

Tianjin University: Tianjin, CN

2020-04 to present | Associate Professor (Department of Material Science and Engineering)
Employment
Source: Self-asserted source
Ran Ding

Tsinghua University: Beijing, Beijing, CN

2016-09 to 2020-04 | Postdoctor (School of Materials Science and Engineering)
Employment
Source: Self-asserted source
Ran Ding

Education and qualifications (2)

University of Science and Technology Beijing: Beijing, Beijing, CN

2011-09-01 to 2016-06-30 | PhD (Institute of Engineering Technology)
Education
Source: Self-asserted source
Ran Ding

Anhui University of Technology: Maanshan, Anhui, CN

2007-09-01 to 2011-06-30 | BS
Education
Source: Self-asserted source
Ran Ding

Works (46)

Strong yet ductile steels via a heterogeneous phase transformation strategy

Scripta Materialia
2024-11 | Journal article
DOI: 10.1016/j.scriptamat.2024.116274
Contributors: Ran Ding; Yingjie Yao; Binhan Sun; Hui Guo; Jun Zhang; Yang Shao; Chi Zhang; Wei Liu; Andy Godfrey; Zhigang Yang et al.
Source: check_circle
Crossref

Kinetics of voids evolution during diffusion bonding of dissimilar metals on consideration of the realistic surface morphology: Modeling and experiments

Acta Materialia
2024-09 | Journal article
DOI: 10.1016/j.actamat.2024.120121
Contributors: Ruijiang Chang; Qianying Guo; Zongqing Ma; Ran Ding; Chenxi Liu; Yongchang Liu
Source: check_circle
Crossref

Flash annealing of a chemically heterogeneous medium Mn steel

Scripta Materialia
2024-03 | Journal article
DOI: 10.1016/j.scriptamat.2023.115923
Contributors: Yan Wang; Ran Ding; Carlo Franke; Tong Li; Xuequan Rong; Pengyu Wen; Zhigang Yang; Hao Chen
Source: check_circle
Crossref

Aging response of a Fe–C–Co–Ni secondary hardening steel: The significance of matrix ordering

Materials Science and Engineering: A
2024-01 | Journal article
DOI: 10.1016/j.msea.2023.145923
Contributors: Xiaorui Wen; Jingwen Zhang; Shaoheng Sun; Hui Guo; Qianying Guo; Ran Ding
Source: check_circle
Crossref

Mechanistic role of Mn heterogeneity in austenite decomposition and stabilization in a commercial quenching and partitioning steel

Acta Materialia
2023-05 | Journal article
DOI: 10.1016/j.actamat.2023.118869
Contributors: Ran Ding; Chaofan Zhang; Yan Wang; Chenxi Liu; Yingjie Yao; Jun Zhang; Zhigang Yang; Chi Zhang; Yongchang Liu; Hao Chen
Source: check_circle
Crossref

Microstructure evolution and tensile behaviors of dissimilar TLP joint of austenitic steel and high-Cr ferritic steel

Materials Science and Engineering: A
2023-04 | Journal article
DOI: 10.1016/j.msea.2023.144818
Contributors: Minglu Chen; Bin Jiang; Ran Ding; Yihuan Liu; Liming Yu; Zejun Wang; Chenxi Liu; Yongchang Liu
Source: check_circle
Crossref

Chemical heterogeneity enables austenite stabilization in a Si-/Al-free Fe-0.2C-2Mn steel

Scripta Materialia
2022-09 | Journal article
DOI: 10.1016/j.scriptamat.2022.114822
Contributors: Chaofan Zhang; Chenxi Liu; Hui Guo; Shaoheng Sun; Hao Chen; Yongchang Liu; Ran Ding
Source: check_circle
Crossref

Effect of post bonding heat treatment on the local strain evolution of transient liquid phase bonded RAFM steel

Materials Science and Engineering: A
2022-04 | Journal article
DOI: 10.1016/j.msea.2022.143008
Contributors: Wei Sun; Xiaohua Li; Minglu Chen; Ran Ding; Zhixia Qiao; Zumin Wang; Chenxi Liu; Yongchang Liu
Source: check_circle
Crossref

Chemical heterogeneity enhances hydrogen resistance in high-strength steels

Nature Materials
2021-12 | Journal article
DOI: 10.1038/s41563-021-01050-y
Contributors: Binhan Sun; Wenjun Lu; Baptiste Gault; Ran Ding; Surendra Kumar Makineni; Di Wan; Chun-Hung Wu; Hao Chen; Dirk Ponge; Dierk Raabe
Source: check_circle
Crossref

Microstructure and mechanical properties of a novel medium Mn steel with Cr and Mo microalloying

Materials Science and Engineering: A
2021-09 | Journal article
DOI: 10.1016/j.msea.2021.141926
Contributors: Chao Wang; Liming Yu; Ran Ding; Yongchang Liu; Huijun Li; Zumin Wang; Chenxi Liu; Hui Wang
Source: check_circle
Crossref

Effect of solution cooling rate on microstructure evolution and mechanical properties of Ni-based superalloy ATI 718Plus

Materials Science and Engineering: A
2021-04 | Journal article
DOI: 10.1016/j.msea.2021.141113
Contributors: Jun Li; Ran Ding; Qianying Guo; Chong Li; Yongchang Liu; Zumin Wang; Huijun Li; Chenxi Liu
Source: check_circle
Crossref

Chemical boundary engineering: A new route toward lean, ultrastrong yet ductile steels

Science Advances
2020-03-27 | Journal article
DOI: 10.1126/sciadv.aay1430
Contributors: Ran Ding; Yingjie Yao; Binhan Sun; Geng Liu; Jianguo He; Tong Li; Xinhao Wan; Zongbiao Dai; Dirk Ponge; Dierk Raabe et al.
Source: check_circle
Crossref

Improving the ductility of ultrahigh-strength medium Mn steels via introducing pre-existed austenite acting as a “reservoir” for Mn atoms

Materials Science and Engineering A
2019 | Journal article
DOI: 10.1016/j.msea.2019.02.034
EID:

2-s2.0-85061430337
Contributors: Sun, B.; Ding, R.; Brodusch, N.; Chen, H.; Guo, B.; Fazeli, F.; Ponge, D.; Gauvin, R.; Yue, S.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

Revealing the role of dislocations on the stability of retained austenite in a tempered bainite

Scripta Materialia
2019 | Journal article
DOI: 10.1016/j.scriptamat.2019.04.019
EID:

2-s2.0-85064324756
Contributors: He, S.H.; He, B.B.; Zhu, K.Y.; Ding, R.; Chen, H.; Huang, M.X.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

Stabilizing austenite via a core-shell structure in the medium Mn steels

Scripta Materialia
2019 | Journal article
DOI: 10.1016/j.scriptamat.2019.03.015
EID:

2-s2.0-85062805216
Contributors: Wan, X.; Liu, G.; Ding, R.; Nakada, N.; Chai, Y.-W.; Yang, Z.; Zhang, C.; Chen, H.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

Austenite/Ferrite Interface Migration and Alloying Elements Partitioning: An Overview

Jinshu Xuebao/Acta Metallurgica Sinica
2018 | Journal article
DOI: 10.11900/0412.1961.2017.00465
EID:

2-s2.0-85046806403
Contributors: Chen, H.; Zhang, C.; Zhu, J.; Yang, Z.; Ding, R.; Zhang, C.; Yang, Z.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

Effect of heat treatment on microstructure and mechanical properties of quenching and partitioning steel

Acta Metallurgica Sinica (English Letters)
2018 | Journal article
DOI: 10.1007/s40195-017-0667-3
EID:

2-s2.0-85042321789
Contributors: Sun, S.-H.; Zhao, A.-M.; Ding, R.; Li, X.-G.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

Effect of pre-existed austenite on austenite reversion and mechanical behavior of an Fe-0.2C-8Mn-2Al medium Mn steel

Acta Materialia
2018 | Journal article
DOI: 10.1016/j.actamat.2018.01.009
EID:

2-s2.0-85041459085
Contributors: Ding, R.; Dai, Z.; Huang, M.; Yang, Z.; Zhang, C.; Chen, H.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

Elucidating the effect of Mn partitioning on interface migration and carbon partitioning during Quenching and Partitioning of the Fe-C-Mn-Si steels: Modeling and experiments

Acta Materialia
2018 | Journal article
DOI: 10.1016/j.actamat.2017.11.025
EID:

2-s2.0-85034416168
Contributors: Dai, Z.; Ding, R.; Yang, Z.; Zhang, C.; Chen, H.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

Thermo-kinetic design of retained austenite in advanced high strength steels

Acta Materialia
2018 | Journal article
DOI: 10.1016/j.actamat.2018.04.040
EID:

2-s2.0-85046122823
Contributors: Dai, Z.; Ding, R.; Yang, Z.; Zhang, C.; Chen, H.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

Ultrafine-Grained Multiphase Steels with Different Microstructural Constitutions Fabricated Through Annealing of Tempered and Deformed Martensite

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2018 | Journal article
DOI: 10.1007/s11661-018-4522-6
EID:

2-s2.0-85042069141
Contributors: Wang, X.; Ding, R.; He, J.; Zhao, A.; Liu, R.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

A cyclic austenite reversion treatment for stabilizing austenite in the medium manganese steels

Scripta Materialia
2017 | Journal article
DOI: 10.1016/j.scriptamat.2017.03.038
EID:

2-s2.0-85017206746
Contributors: Zhu, J.; Ding, R.; He, J.; Yang, Z.; Zhang, C.; Chen, H.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

Effects of Mn and Cr contents on microstructures and mechanical properties of low temperature bainitic steel

Journal of Iron and Steel Research International
2017 | Journal article
DOI: 10.1016/S1006-706X(17)30042-0
EID:

2-s2.0-85016069489
Contributors: Guo, H.; Zhou, P.; Zhao, A.-M.; Zhi, C.; Ding, R.; Wang, J.-X.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

Two-body abrasion wear mechanism of super bainitic steel

Materials Science and Technology (United Kingdom)
2017 | Journal article
DOI: 10.1080/02670836.2016.1245239
EID:

2-s2.0-84992170459
Contributors: Guo, H.; Zhao, A.; Zhi, C.; Ding, R.; Wang, J.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

Effect of annealing temperature on microstructure and properties of a dual phase steel

Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment
2016 | Journal article
EID:

2-s2.0-85008870942
Contributors: Zhao, Z.-Z.; Yan, Y.; Yin, H.-X.; Ding, R.; Xi, H.-L.; Liang, J.-T.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

Effect of pre-strain on mechanical properties and hardening behavior of TRIP steel

Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment
2016 | Journal article
EID:

2-s2.0-85008678065
Contributors: Hu, H.-J.; Zhao, A.-M.; Yin, Z.-K.; Dong, R.; Ding, R.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

Quenching and partitioning steel produced through hot rolling, direct quenching and annealing

Materials Science and Technology (United Kingdom)
2016 | Journal article
DOI: 10.1080/02670836.2015.1133271
EID:

2-s2.0-84981743384
Contributors: Guo, H.; Zhao, A.; Ding, R.; Zhi, C.; He, J.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

Wear Resistance Research of Advanced High Strength Steels

Materials Science Forum
2016 | Book
DOI: 10.4028/www.scientific.net/MSF.850.197
EID:

2-s2.0-84962053153
Contributors: Zhi, C.; Gong, Y.; Zhao, A.; He, J.; Ding, R.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

Effect of annealing process on microstructure and mechanical properties of 1200 MPa high strength TRIP-aided steel

Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment
2015 | Journal article
EID:

2-s2.0-84925667066
Contributors: Dong, R.; Zhao, A.-M.; Ding, R.; He, J.-G.; Li, Z.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

Effect of annealing temperature on formability of Cr17 ferritic stainless steel

Jinshu Rechuli/Heat Treatment of Metals
2015 | Journal article
DOI: 10.13251/j.issn.0254-6051.2015.04.027
EID:

2-s2.0-84929465151
Contributors: Zhang, C.; Zhao, A.; Ding, R.; Meng, X.; Li, S.; Wang, Y.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

Effect of annealing temperature on mechanical properties of a ultra-fine-grained steel heat-treated by quenching and partitioning process

Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment
2015 | Journal article
EID:

2-s2.0-84952663178
Contributors: Miao, D.-Y.; Tang, D.; Zhao, Z.-Z.; Ding, R.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

Effect of bainite isothermal temperature on microstructure and properties of 0.2C-1.5Si-2Mn-0.43Cu-0.26Ni TRIP steel

Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment
2015 | Journal article
EID:

2-s2.0-84947802816
Contributors: Zhou, K.-C.; Zhao, A.-M.; Yin, H.-X.; Zhao, Z.-Z.; Ding, R.; Ding, X.-N.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

Effect of batch annealing process on microstructure and mechanical property of 1700 MPa grade hot stamping steel

Materials Research Innovations
2015 | Journal article
DOI: 10.1179/1432891715Z.0000000001927
EID:

2-s2.0-84947906072
Contributors: Yao, S.; Zhao, A.M.; Li, X.G.; Cheng, J.Y.; Ding, R.; Yin, H.X.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

Effect of ultragrain refinement on quenching and partitioning steels manufactured by a novel method

Materials and Design
2015 | Journal article
DOI: 10.1016/j.matdes.2015.08.073
EID:

2-s2.0-84944186895
Contributors: Ding, R.; Tang, D.; Zhao, A.; Guo, H.; He, J.; Zhi, C.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

Microstructure and mechanical properties of TRIP-aided steels with different heat treatments

Materials Science Forum
2015 | Book
DOI: 10.4028/www.scientific.net/MSF.817.439
EID:

2-s2.0-84927942874
Contributors: Dong, R.; Zhao, A.M.; Ding, R.; He, J.G.; Hu, H.J.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

Temperature and stress field coupling analysis for collapse of 72AU2 hot rolled strip

Jinshu Rechuli/Heat Treatment of Metals
2015 | Journal article
DOI: 10.13251/j.issn.0254-6051.2015.09.042
EID:

2-s2.0-84944582855
Contributors: Hu, H.; Zhao, A.; Dong, R.; Ding, R.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

A new type of quenching and partitioning processing developed from martensitic pre-microstructure

Materials and Manufacturing Processes
2014 | Journal article
DOI: 10.1080/10426914.2014.912304
EID:

2-s2.0-84902252927
Contributors: Ding, R.; Tang, D.; Zhao, A.; Dong, R.; Cheng, J.; Zhang, X.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

A novel design to enhance the amount of retained austenite and mechanical properties in low-alloyed steel

Scripta Materialia
2014 | Journal article
DOI: 10.1016/j.scriptamat.2014.06.014
EID:

2-s2.0-84905387735
Contributors: Ding, R.; Tang, D.; Zhao, A.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

Effect of annealing temperature on microstructure and properties of 1100 MPa grade cold-rolled dual-phase steel

Jinshu Rechuli/Heat Treatment of Metals
2014 | Journal article
DOI: 10.13251/j.issn.0254-6051.2014.10.003
EID:

2-s2.0-84911210824
Contributors: Tong, T.; Zhao, Z.; Dong, R.; Yin, H.; Ding, R.; Yin, Y.; Li, S.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

Effect of continuous annealing process on microstructure and mechanical properties of 5% Mn ultrafine grain TRIP steel

Cailiao Kexue yu Gongyi/Material Science and Technology
2014 | Journal article
EID:

2-s2.0-84925235674
Contributors: Zhao, Z.; Yin, H.; Zhao, A.; He, J.; Ding, R.; Zheng, H.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

Effect of intercritical temperature on quenching and partitioning steels originated from martensitic pre-microstructure

Journal of Materials Research
2014 | Journal article
DOI: 10.1557/jmr.2014.285
EID:

2-s2.0-84910117896
Contributors: Ding, R.; Tang, D.; Zhao, A.; Dong, R.; Cheng, J.; Meng, X.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

Effect of Nb on microstructure and mechanical properties in non-magnetic high manganese steel

Journal of Iron and Steel Research International
2014 | Journal article
DOI: 10.1016/S1006-706X(14)60093-5
EID:

2-s2.0-84901976195
Contributors: Cao, J.-L.; Zhao, A.-M.; Liu, J.-X.; He, J.-G.; Ding, R.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

Effects of annealing temperature on the microstructure and mechanical properties of TRIP steel with annealed martensitic matrix

Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing
2014 | Journal article
DOI: 10.13374/j.issn1001-053x.2014.11.008
EID:

2-s2.0-84916244914
Contributors: Ding, R.; Tang, D.; Chen, Y.-L.; Zhao, A.-M.; Kuang, S.; Jiang, Y.-H.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

Microstructure and mechanical properties of 30SiMnCrB5 hot stamping steel

Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing
2014 | Journal article
DOI: 10.13374/j.issn1001-053x.2014.10.004
EID:

2-s2.0-84909949512
Contributors: Cheng, J.-Y.; Chen, Y.-L.; Zhao, A.-M.; Ding, R.; Wang, Z.-H.; Kuang, S.; Jiang, Y.-H.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

Microstructure and mechanical properties of continuous cold rolling strip steel welded joint

Jinshu Rechuli/Heat Treatment of Metals
2014 | Journal article
DOI: 10.13251/j.issn.0254-6051.2014.04.014
EID:

2-s2.0-84900486547
Contributors: Dong, R.; Zhao, A.; Li, Z.; Cheng, J.; Zhao, F.; Ding, R.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier

Microstructure and properties of 1 300 MPa-Grade C-Si-Mn series cold-rolled ultrahigh-strength steel

Huanan Ligong Daxue Xuebao/Journal of South China University of Technology (Natural Science)
2014 | Journal article
DOI: 10.3969/j.issn.1000-565X.2014.06.011
EID:

2-s2.0-84940224175
Contributors: Zhao, Z.-Z.; Tong, T.-T.; Dong, R.; Ding, R.; Zhang, C.; Meng, X.
Source: Self-asserted source
Ran Ding via Scopus - Elsevier
How many people are using ORCID?